Related
...but I want it to start Pocket Music 5 which is the player I use or even WMP. When I use Kaiser Tweak the default player only gives a choice between Audio Manager and WMP - how can I add Pocket Music to that to be able to select as default. However it does not matter which default I select using Kaiser Tweak as the RC E100 only operates the HTC Audio Manager.
Can someone please direct me to another possible registry entry that can fix this?
thanks guys
Didn't the remote only support windows media player?
no, doesnt support WMP. I tried to get it to run anything other than Audio Manager but as soon as you push any button on the remote unit, it starts up Audio Manager - regardless of whats running.
If I have Pocket Player running, the music is routed through the remote headset but it does not respond to any button pushes; again; it just starts Audio Manager.
Any suggestions? Is there a registry hack?
I'm in the same situation as you !
I contacted HTC, and they said the driver is developed to support only the Audio Manager. My contact having on the other phone a technician of HTC, I have asked to tell him to improve the driver to support other Media Player
But ... nothing moves ...
...bump..
anybody have any ideas please? or having same experience?
Cant believe there are only 2 of us with Kaisers using the new RC E100 headset?
I'm still waiting for mine
THough i like the audio manager
Leonsc said:
...bump..
anybody have any ideas please? or having same experience?
Cant believe there are only 2 of us with Kaisers using the new RC E100 headset?
Click to expand...
Click to collapse
I got mine yesterday, using WMP on my Tilt though. I didn't have to install the included driver.
I thought it was possible? how did you get it to work on WMP?
I tried calling HTC support but less than worthless....
The Tilt doesn't have the HTC Audio Manager, just WMP.
I didn't do anything other than plug in the remote, hitting a button then launches WMP.
Can anyone please give me a clue as to where in the registry to look - I'll play around this weekend and see if I can come up with something BUT can one of the hotshots on this forum PLEASE give me an idea of WHERE in registry to start looking.
HTC TyTN2 E100
Hello,
I know that problem too. Have you, at least, identify which HTC driver is used (name ?).
Maybe we may developp one ourself.
Cheers,
J
Hi,
I have both AudioManager and WMP and when I press play on the remote AM starts but when WMP is started first the remote controls WMP. I didn't install driver form CD.
But on the other hand it would be great to control other apps with the remote. I tried many programs to capture E100 buttons but no luck. Only phone buttons can be used. I configured TCPMP to use them as next/previous.
I think intercepting communication between E100 and kaiser would give us some idea how does it work - is it USB or some kind of pulsing through button line of the EXTusb.
Orange stock 6.0 ROM
rafgerm said:
Hi,
I have both AudioManager and WMP and when I press play on the remote AM starts but when WMP is started first the remote controls WMP. I didn't install driver form CD.
But on the other hand it would be great to control other apps with the remote. I tried many programs to capture E100 buttons but no luck. Only phone buttons can be used. I configured TCPMP to use them as next/previous.
I think intercepting communication between E100 and kaiser would give us some idea how does it work - is it USB or some kind of pulsing through button line of the EXTusb.
Orange stock 6.0 ROM
Click to expand...
Click to collapse
How I would solve this is to dump the register before pressing start and dump it after I had pressed start then use a comparing program and look up where in the register the change is made (triggered), then swap it whit the wanted program.
How I would solve this is to dump the register before pressing start and dump it after I had pressed start then use a comparing program and look up where in the register the change is made (triggered), then swap it whit the wanted program.
Click to expand...
Click to collapse
I'm not sure if pressing the button triggers any changes to the register. I was thinking more about taping into physical signals between Kaiser and E100 remote but this could lead to trashing the device in the process Or maybe someone asm literate will look into driver file using IDA to tell us what registry keys it points to.
rafgerm said:
I'm not sure if pressing the button triggers any changes to the register. I was thinking more about taping into physical signals between Kaiser and E100 remote but this could lead to trashing the device in the process Or maybe someone asm literate will look into driver file using IDA to tell us what registry keys it points to.
Click to expand...
Click to collapse
Everything is logged, by dumping before/after is like to see what actually happened, once you spotted the change you go in and study the area of register. No need for a integrated development environment on this one as we know that this is what kaiser tweak do; change youre register... I suggested to make the changes that the register is sorted to run whatever player of own choice. This is one of many ways to do just that. And after you know the changes you can cab it and save it for another rainy day.
Hi,
The audio player on the main interface looks pretty but very basic. Looking through various video reviews I can spot Audio Booster but not HTC Audio Manager, my preferred player.
It doesn't apper in the standard Windows programs folder eiether from what I can see of video reviews.
Does anyone know if it the current version is compatible to install on the Diamond?
Or whether the Touch Diamond player has an extended interface where you can view lists of songs rather than pictures (e.g. All songs by an artist?) - couldn't spot any options!
Many thanks - A.
I think I saw an extended interface in one video, with fancy TouchFLO 3D tabs at the bottom. These tabs appeared to be for things like 'Songs', 'Albums' and 'Artists'. However, I haven't the faintest idea where that video was any more, and it may have been a test build.
the dump i have of the rom posted here which is a shipped diamond rom has the audiomanager exe. maybe post a question on coolsmartphone.com, and theylll answer it tomorrow
Rory
the new audio mananger is pretty much what you see on the touchflo 3d. the old one is now gone. the mp3trimmer from the old one is now as a seperate program.
465458464651879867imjkl;nml;km
This is just a random test 789754667-dfkcm-54354
Hi,
Have anyone noticed AVRCP buttons ( next/previous and play pause buttons) not working in Pocketmusic and PocketPlayer. But they are working perfectly in TouchFlo3d music player and also Windows Media player.
Any fix?
I found this problem too as I always played pocketmusic; now I play my mp3s thru audio manager cause I don't know how to fix it, sorry.
that's weird, hope somebody could throw some light over this issue
no fixes yet? nobody got a clue?
is there button mapping options in Pocket Music player?
Would be great if this could be fixed
i am trying to link different applications with AVRCP / A2DP though without luck...
it did worked on Tytn II , though the Diamond seems not to offer the possibility to control 3rd party Multimedi applic's
Coreplayer 1.25 ; no AVRCP - only volume control
Pocket player 3.6 : same as above.
WMP -on board : all works, but the sound output is less than the above
I will try to associate file extensions with other programs and report back if this would solv.
i guess only disabeling Touchflo might solve this temporarely as a work around.
I have same troubles with CorePlayer too
When I connect my DS-970, its controls TF3D player tab
I try to disable this tab - CorePlayer didn't work correctly too
but WMP did! (
Reg tak request
I posted left and right requests to tweakers to have a look into this but without luck yet.
Advanced Config (or boinger66 add-ons for Advance Config 2.1) should be the most suitable solution though.
If you guys would liek to post a few other direct requests (no new thread yet) someone with the required knowledge might come up with something ..
DS980 VS HTC Daimond + Pocket music
I have got the same problem. Now, I post my problem to Pocketmind support team already. They said, they will get back to me. Actually, I am not advance user and this problem should be a known problem, unfortunately, I tried to search on many web by using google, hopeless!!
If I got any feedback from the support team, will share
timn2087 said:
is there button mapping options in Pocket Music player?
Click to expand...
Click to collapse
There is option on the button mapping but it did not work with AVCRP bluetooth. It works on the handheld itself
Having same problem too.. have installed the WMP plug-in for Pocket player and enabled the workaround relating to play/pause for WMP A2DP in the config screen. However, still cannot use AVRCP to control Pocket Player from my Bluetooth car stereo.
Not a major issue, but it would be nice to get working as I've been impressed with PP so far and so will probably end up buying it.
Thx
M.
ceevee369 said:
I posted left and right requests to tweakers to have a look into this but without luck yet.
Advanced Config (or boinger66 add-ons for Advance Config 2.1) should be the most suitable solution though.
If you guys would liek to post a few other direct requests (no new thread yet) someone with the required knowledge might come up with something ..
Click to expand...
Click to collapse
I'm following this thread because I plan to buy a Touch Pro when it comes out in my area and I want PocketPlayer to work with the AVRCP on my new car stereo.
I saw from your post about Advance Config and I was curious if anybody tried setting the Default Music Player for the HTC Music Plugin setting? Does that help?
Advance Config can be downloaded here: http://www.touchxperience.com/
As I do not have a Touch Pro yet, I cannot test this, but I am curious about other's experiences solving this issue.
Until today, Pocketmind has not reply my question yet. May be, they could not figure out too. I posted my the same question in some other forum. One of the reply stated that I should find the plugin AVRCP for pocketMusic. Again, Until today, I tried to search in the google, I still could not find plugin AVRCP for pocket music. If anyone of you have a luck on this, please
thx1200 said:
I'm following this thread because I plan to buy a Touch Pro when it comes out in my area and I want PocketPlayer to work with the AVRCP on my new car stereo.
I saw from your post about Advance Config and I was curious if anybody tried setting the Default Music Player for the HTC Music Plugin setting? Does that help?
Advance Config can be downloaded here: http://www.touchxperience.com/
As I do not have a Touch Pro yet, I cannot test this, but I am curious about other's experiences solving this issue.
Click to expand...
Click to collapse
After I launch your above web, then, I link to
http://www.touchxperience.com/
I saw the "HTC Music Manager" function in the description that allow you to choose default music player in the link but when install, NO "HTC MUSIC Manager". So ridiculous
My old Touch was able to map the Hardwarebutton BT to Start/Stop, so i could pause/Play by pressing BT Sidebutton.
On the Diamond and on the old Touch this is implemented in 1-3 DLLs. As it is hardcoded in these DLLs - it is definitly not possible to "remap" these buttons :-(
I asked in the forum if it is possible to use the DLLs from the "old" Touch. ... No interesting feedback by now...
ratzefumm said:
My old Touch was able to map the Hardwarebutton BT to Start/Stop, so i could pause/Play by pressing BT Sidebutton.
On the Diamond and on the old Touch this is implemented in 1-3 DLLs. As it is hardcoded in these DLLs - it is definitly not possible to "remap" these buttons :-(
I asked in the forum if it is possible to use the DLLs from the "old" Touch. ... No interesting feedback by now...
Click to expand...
Click to collapse
Thanks for your info. Until today, nobody could solve this problem!!. I left this issue to Pocketmind and they said they would come back in 3 days. Now 10 days already. May be, they are also incapable to solve it : (
Same problem here with Mort Player on HTC Touch Pro (Raphael).
It seems, they changed the way BT stack interprets AVRCP commands, or hardcoded sending these commands directly to WMplayer, cause it is only think that works with AVRCP.
I hope this will be soon solved in some cooked ROMs.
johny.mnemonic said:
Same problem here with Mort Player on HTC Touch Pro (Raphael).
It seems, they changed the way BT stack interprets AVRCP commands, or hardcoded sending these commands directly to WMplayer, cause it is only think that works with AVRCP.
I hope this will be soon solved in some cooked ROMs.
Click to expand...
Click to collapse
If you hear about a cooked ROM that fixes this, please post it here!
I don't usually have time to comb through all the awesome stuff going on at XDA and would very much appreciate it!
Hi, is there a music player that can be controlled (next, previos, volume, play/pause) with the buttons on the stock wired headset? I can't use them in WMP and is very frustrating.
BT function for Pocket Music
Still no response from Pocketmind. Also, tried to search, hopeless.
Friends,
I am a very big fan of SRS on the Raphael and I tell you the application plugin is pain to get working. As everyone has written before my post, it either works or it doesn't on their device. There are a few versions out there floating around and it does require a lot of trial and error in order to get the sound wanted from the plugin.
Now, before I start I have been through three Raphael phones due to hardware problems that I had to send back for RMA replacement. I am now on my fourth phone and hope it stays that way for a long time!
On two of the raphael phones, I was not recieving the full punch of SRS wow with the extra bass, compression, surround sound etc.. But on the other two same identical phones I had no problems with the full sound. At the present, if I listen to a song - doesn't matter the song I hear the bass thumping into my chest.. Sometimes, it can be annoying and other times the balence that srs brings out between all instruments is amazing. This is where SRS does a beautiful job bringing out the extra heavey bass without muffling the other sounds. If you think your srs is working but doesn't deliever the bass thumping in your chest as I describe for your mp3 playback phone, then it's truely not working...
I have included my screen shots, registry edits and the different device information for you to plow through and compare. Now, remember this is for the AT&T Raphael pocket pc phone.
Steps
1. Install SRS_WOW_HD 121.CAB and reboot the ppc
2. Install WOWHD_ARM_Panel.cpl - copy this file directly to \windows folder. It might take a few seconds to copy.
3. Change the registry entries before going into the app.
4. Goto: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
5. Change "Flags"=dword:00010000 to "Flags"=dword:00010002 (Note: Energy Rom 3.0 I had to add the Flag Value)
6. Launch SRS WOW from the settings and use the screen shot I supplied. I like the heavey bass thumping sound, so these are my settings.
SRS Software Versions
I could not get the other software versions to work with the raphael phone. So for SRS to work 121 is the only one that works. Don't waste your time trying the others....just use 121
Now, how do you figure out if your Raphael phone will produce the sound with SRS WOW as I mentioned above? That is a good question because it definitely comes down to the electronics in the device that HTC puts into the device. Should SRS WOW work on all devices "YES" but as I expressed earlier, it does not. I have already been through four phones and two worked and two didn't. (Same settings, reg edits, radio, spl etc). So there is something between the devices that delivers better performance with SRS.
Stats Information on PPC
Rom Version Tested in ROMeOS or Energy 3.0 (no problems)
Radio Version: RUU_1.02.25.32 (AT&T Stock Radio)
Music Players Tested: S2P, Touchflo Music Player (no problems)
IMEI - first ten digits I noticed a trend between phones. "15" works and "12" does not. I verified this with the other two phones and the one that did work also had a "15"..
3531420212 SRS doesn't work (Old Phone)
3531420215 SRS works (New Phone)
SPL
RAPH110
SPL-1.90.Olinex
MicroP-Raph (LED) v13
MicroP-Raph (Key) v5
PSOC-Raph Stage_CVT v0x36
R: 1.02.25.32
G: 52.39c.25.22
D: 1.9xromeos (RomeOS) or Energy Rom 3.0
Mac Address
I also noticed that the two phones that SRS wow did work on the mac addresses were close and similar, the other two were different.
I would honestly for those really interested in having SRS on their phone for the Raphael users, definitely use ROMeOS rom and radio I listed.
It will take some trial and error deffinitely. But in the meantime, the application SRS wow has to be handled with kid gloves in order to real deliver the sound.
Also, take note and back everything up before making changes to your ppc.
Please note that I am not the person who originally figured out how to change the registry values. Not too sure who the author was, so I can't make that claim only pass on to others what helped me.
Good luck and hope you enjoy.
Tvos
Hi tvos,
You mentioned "6. Launch SRS WOW from the settings and use the screen shot I supplied. I like the heavey bass thumping sound, so these are my settings." The screen shots you have uploaded does not show any settings specific to SRS .
TIA
what do you mean? they are there..
tvos
Good job tvos,
Thanks for adding the screen shots.
Does this make the htc audio manager stop working, I thought I read in a post somewhere that it does...thanks TVOS
the plugin for SRS does not work with audio manager. I tested srs working in S2P and other third party apps and it works fine.. something with htc audio manager or srs just don't like each other..
tvos
Thanks!
Seems to work very well on mine...with IMEI 0202 (early build). I am also using NATF's ROM with the .28 radio.
EDIT: After installing the app, the phone goes to sleep and never wakes up -- have had to soft reset each time. I have since uninstalled and all is back to normal.
thats good... its really hard to say why SRS works on some devices and others it does not. i know from experience that srs didn't work well with the two that I had to return but the other worked fine and delivered BIG bass sound..
thak you for your contribution.
tvos
SRS over A2DP
I have this working on my Fuze (SRS 1.2.10.0 from the MONX cab, including the CPL) and it truly rocks my brain playing with S2P.
I really love it!
If you are having issues with yours, here is the CAB I use. I am also including the REG file with the settings I use. Give those a whirl.
(Monx, if this is somehow not kosher, please let me know and I'll remove it, post-haste. All credit for this CAB should go to MONX)
Yom said:
I have this working on my Fuze (SRS 1.2.10.0 from the MONX cab, including the CPL) and it truly rocks my brain playing with S2P.
I really love it!
If you are having issues with yours, here is the CAB I use. I am also including the REG file with the settings I use. Give those a whirl.
(Monx, if this is somehow not kosher, please let me know and I'll remove it, post-haste. All credit for this CAB should go to MONX)
Click to expand...
Click to collapse
Any specific installation step??
pkshr said:
Any specific installation step??
Click to expand...
Click to collapse
Well, ensure you don't have SRS WoW already installed (uninstall and sr if you do)
Install CAB
extract REG file in ZIP, copy to phone, and import (using whatever registry editor you prefer - DotFred's works a treat)
open the new WoW SRS applet in Settings, and then close. (don't change anything)
Connect your headphones (BT or cabled, no matter)
fire up your favorite player
hit PLAY boogie to the very satisfying sound form your headphones
Have fun!
Hi is this configured to work in TouchFlo music tab and also change the volume? The other cab I used wouldnt allow me to change the volume and would also stop working after a call was received or made.
Thanks!
Yom said:
Well, ensure you don't have SRS WoW already installed (uninstall and sr if you do)
Install CAB
extract REG file in ZIP, copy to phone, and import (using whatever registry editor you prefer - DotFred's works a treat)
open the new WoW SRS applet in Settings, and then close. (don't change anything)
Connect your headphones (BT or cabled, no matter)
fire up your favorite player
hit PLAY boogie to the very satisfying sound form your headphones
Have fun!
Click to expand...
Click to collapse
norkoastal said:
Hi is this configured to work in TouchFlo music tab and also change the volume? The other cab I used wouldnt allow me to change the volume and would also stop working after a call was received or made.
Thanks!
Click to expand...
Click to collapse
No clue, my friend. I don't use the music tab. It has worked flawlessly with WMP, PocketPlayer, and S2P, though.
i got it to work but the settings don't last when i use my bt headset. i have to open s2p & play a song, then minimize it, open up srs wow then choose internal headphones, then it would change to my desired setting.
it doesn't happen with wired headphones though.
Thanks!
Works great on my Sprint Touch Pro running JD ROM v2.15, OP's CAB worked, Yom's CAB did not (gave me a driver not loaded error in the control panel applet, even after a soft reset).
You should update the instructions to indicate that the .cpl file should be copied to the \Windows folder, and can be accessed by going to Start->Settings->System tab.
Edit: I changed the Flags registry value back to my device's previous value (0). I'm fairly sure the new value was causing an issue where if I put my device in standby with the power button I couldn't wake it up, forcing me to perform a soft reset.
You should update the instructions to indicate that the .cpl file should be copied to the \Windows folder, and can be accessed by going to Start->Settings->System tab.
are you talking about the separate file that is copied to the windows folder after the intial install?
i have added that already..
thanx.
tvos
norkoastal said:
Hi is this configured to work in TouchFlo music tab and also change the volume? The other cab I used wouldnt allow me to change the volume and would also stop working after a call was received or made.
Thanks!
Click to expand...
Click to collapse
I have SRS WOW working in the TF3d music player tab, with working volume buttons.
Here's how I did it: http://forum.xda-developers.com/showthread.php?t=485732
However, if there is a simple .cab that would be better --- but I couldn't find such a .cab.
sethlo said:
I have SRS WOW working in the TF3d music player tab, with working volume buttons.
Here's how I did it: http://forum.xda-developers.com/showthread.php?t=485732
However, if there is a simple .cab that would be better --- but I couldn't find such a .cab.
Click to expand...
Click to collapse
Thanks for the update.. Does the music player work after calls are made/received? I had to soft reset to get the tunes back on.
Maybe someone had the same problem than me...
I installed SRS, and it works great with S2P... But after install, i can't hear anyone when i received a phone call...
I MUST hard reset to hear my phonecall !
Is there any solution ?
I'm not sure why but, I've got this working just fine with HTC's Audio Manager. I've got a (relatively) new HTC Fuze (AT&T) purchased off Craigslist with Audio Manager installed from a seperate cab located in the Raphael forum.
Rockin' big-time through my Plantronics 590A BT headphones. Looking forward to kicking some tunes through my portable "stereo" (old set of PC speakers & Sub) that I connect to using my Motorola BT receiver.
I just moved over from the Tilt to the Fuze. I loved the way the HTC Audio Manager functioned on the Tilt, speedy and user friendly.
Unfortunately that cab no longer works on my Fuze. I've tried Win Media and Core Player but both programs have an incredible lag when choosing playlists.
Is there a HTC Audio Manager cab for the non-Manilla version? What else are you guys using to play your MP3's?
Try MortPlayer or GSPlayer.
I like Mortplayer. You have to be careful with the skins though, some of them like to crash, or have impossibly small fonts.
I wish someone would come up with a skin that has a car screen that's basically three HUGE buttons (skip forward, back, and play/pause) and then the name of the song and a counter. Most people have tried to focus on aesthetics but I think that would be the most useful.
mortplayer had a tendency to lag/skip when i play music on my fuze. i've since then switched to pocket player (so far so good)
I would use Nitrogen when I am on the run. If I have time, I like the look and interface of S2P. It's pretty slick with opengl.
Great feedback. I'll look into those programs.
One thing I noticed is that a lot of the players would shut off when the phone goes into sleep mode. Do mort player, nitrogen have that problem?
Here's the .cab for HTC Audio Manager fot TP/Fuze
I had HTC's Audio Manager working on my TP, found the cab after lots of diggin and testing... got it here on XDA, just don't remember where...(thanks to the maker of the cab anyways, sorry I don't remember who you are! )
Well, enough chatting, here you get it (lucky you I keep most of my cabs in MediaFire ):
http://www.mediafire.com/?mvzdydnnma1
Cheers.
cassiano said:
I had HTC's Audio Manager working on my TP, found the cab after lots of diggin and testing... got it here on XDA, just don't remember where...(thanks to the maker of the cab anyways, sorry I don't remember who you are! )
Well, enough chatting, here you get it (lucky you I keep most of my cabs in MediaFire ):
http://www.mediafire.com/?mvzdydnnma1
Cheers.
Click to expand...
Click to collapse
Thanks! I've been playing around with both HTC Audio Manager and Nitrogen. Both are great programs so it's hard to narrow it down to one music program for my Fuze.
cassiano said:
I had HTC's Audio Manager working on my TP, found the cab after lots of diggin and testing... got it here on XDA, just don't remember where...(thanks to the maker of the cab anyways, sorry I don't remember who you are! )
Well, enough chatting, here you get it (lucky you I keep most of my cabs in MediaFire ):
http://www.mediafire.com/?mvzdydnnma1
Cheers.
Click to expand...
Click to collapse
Thank You.
somepeon said:
Great feedback. I'll look into those programs.
One thing I noticed is that a lot of the players would shut off when the phone goes into sleep mode. Do mort player, nitrogen have that problem?
Click to expand...
Click to collapse
I'm not sure it's a unique feature, but I am toying with Nitrogen, and it has a "blank screen" button. The elements of Nitrogens user-interface are super-simple and easy to manipulate. As a plus its billed to be lightweight and responsive - it's fast to me.
Nitrogen is still early in development, and it looks like the author is adding features that you may miss, relative to more mature players, like Mort.
eudaemonic said:
I'm not sure it's a unique feature, but I am toying with Nitrogen, and it has a "blank screen" button. The elements of Nitrogens user-interface are super-simple and easy to manipulate. As a plus its billed to be lightweight and responsive - it's fast to me.
Nitrogen is still early in development, and it looks like the author is adding features that you may miss, relative to more mature players, like Mort.
Click to expand...
Click to collapse
I have a cab in my faq that's called keep music playing.
basically you just hit the power button to put your phone into standby mode.
it's better than blank screen as taht just shows a black screen and still uses more battery.
The music player built in to tf3d is as good as any of the other ones. Nice library function. Menu has the audio booster built in to it. Shuffles music. I can't find anything that works as good as this. This came stock with my sprint touch pro.
i use S2P *Slide 2 Play* it also intergrates itself into S2U just like the iphone which i like, power manage is awesome while using the music player and ease of use is also great, make it even better yet, its FREE!!
p3p3l3pew said:
The music player built in to tf3d is as good as any of the other ones. Nice library function. Menu has the audio booster built in to it. Shuffles music. I can't find anything that works as good as this. This came stock with my sprint touch pro.
Click to expand...
Click to collapse
I am with you on this one. However i recently switched to WM 6.5 and titanium to save battery life so I have lost the Touchflo music player. I tried nitrogen and found it to be great in every way except one.
On the Touchflo music player it would scan your whole phone for all of your music and organize it for easy selection. With nitrogen though you have to look through all of your folders to find a song which is a major turn down for me as I use itunes to organize my music. Which means it goes by album and I never remember which album a certain song is in. If anyone knows of a workaround that would be great.
The best music player is Pocket Music Bundle.
Best sound and manager playlist.
http://www.pocketmind.com/pmfp.htm
realy like htc audio manager. Even when I used tf3d, for some reason the volume was too loud, and I hated having only 6 increments for volume.
Also unlike windows media player, audio manager doesn't think my 4 zillion sound files whic are from my various instaled games are music too