Questions on MicroSD - Tilt, TyTN II, MDA Vario III General

Hopefully an easy question for someone to answer! Will the Kaiser read a SanDisk 8GB MicroSDHC card?
On another point, I have a 4GB MicroSD that no device can read anymore. I cannot reformat it as it does not show up on the device (PC, PDA or anything!). Any ideas?

gregwhitehouse said:
Hopefully an easy question for someone to answer! Will the Kaiser read a SanDisk 8GB MicroSDHC card?
On another point, I have a 4GB MicroSD that no device can read anymore. I cannot reformat it as it does not show up on the device (PC, PDA or anything!). Any ideas?
Click to expand...
Click to collapse
1. yes
2. ??

1. Thats what I have
2. Broken card, throw it away?

Hmmm
1. Been running that for a while.
2. Make sure your PC Reader can support MicroSD before deciding that the PC can't read it (hint - putting the microSD card into the Sandisk larger shell does NOT make it a regular SD card). If you are POSITIVE your computer can read a MicroSD card, and it doesn't register, then toss the card.

jdmba said:
2. Make sure your PC Reader can support SDHC before deciding that the PC can't read it (hint - putting the microSD card into the Sandisk larger shell does NOT make it a regular SD card).
Click to expand...
Click to collapse
Corrected above - the adapter DOES turn a MicroSD into an SD, AND a MicroSDHC into an SDHC. But, not all readers can read the HC cards (4GB and more).

gregwhitehouse said:
Hopefully an easy question for someone to answer! Will the Kaiser read a SanDisk 8GB MicroSDHC card?
Click to expand...
Click to collapse
This has been asked many times and the answer remains yes (the same for the 16 GB version - I use one with my TyTN II).
On another point, I have a 4GB MicroSD that no device can read anymore. I cannot reformat it as it does not show up on the device (PC, PDA or anything!). Any ideas?
Click to expand...
Click to collapse
When you say 'anymore', whats changed? Are you still using the same microSDHC -> SDHC adapter that the card came with and a suitable SDHC compatible reader when testing it on your PC? If so, it's time to get in touch with the company that sold it to you for a warranty claim.

I had a similiar problem. While moving some music over to my 8 gig SD brand card it failed after about 3/4 of the files and then dissapeared. I've tried soft reseting and popping the card in and out and I can't get my phone to recognize it.
I need to get a new usb adapter b/c the I don't think the one I have is hc compatable (it's a few years old) so I have no idea if my computer will recognize it directly. Does this sound like a card issue or phone issue.
Running ATT WM6.1 minus bloat with a few programs (all of which have been running for a week or so no problems). Sorry to hijack, I just didn't want to open a new thread and get flamed.

i got a 4gb micro SDHC, its a sandisk. i got it to upgrade from my 2gb sd, i have read that the HC cards (sorry if the card is in the acronym) are compatible with tytn II's.
it wasn't with my original rom, and now i have tried to new roms both of which wont recognise it at all. is there anything i can do?

patriotaus said:
i got a 4gb micro SDHC, its a sandisk. i got it to upgrade from my 2gb sd, i have read that the HC cards (sorry if the card is in the acronym) are compatible with tytn II's.
it wasn't with my original rom, and now i have tried to new roms both of which wont recognise it at all. is there anything i can do?
Click to expand...
Click to collapse
I have 4GB sandisk sdhc card in my Kaiser and its working withot problem.
Did u try to format the card using fat32?

I just put a 16 gig Sandisk in mine last week I found on Amazon.com for about $65. Works fine.
Mack

New owner of Kaiser,I had Artemis and Touch so far,now I want to buy 4gb micro SD card (made by Kingston) for Kaiser, Has anyone had any problems with 4gb miscro SD?Will it work smooth and without any problems?
Thanx in advance
Greets from Serbia!

Since this morning my device is telling me that no Storage Card is inserted. I didn't change anything and the SD has been inside the device all the time. I bought the device around april 2008. I still have to test the card on my PC at home, but I wanted to check what my chances are. What is a bigger change? That the SD card just died on me or that my device has a hardware problem?
Funny thing is that yesterday I flashed to a diffrent ROM. I did a hard reset, still no luck. Flashed with an entirely other ROM, still no luck. So I am hoping its just the SD card that broke. Would be strange if flashing a ROM would cause the SD card hardware inside the device to fail the next day.

gochem said:
Since this morning my device is telling me that no Storage Card is inserted. I didn't change anything and the SD has been inside the device all the time. I bought the device around april 2008. I still have to test the card on my PC at home, but I wanted to check what my chances are. What is a bigger change? That the SD card just died on me or that my device has a hardware problem?
Funny thing is that yesterday I flashed to a diffrent ROM. I did a hard reset, still no luck. Flashed with an entirely other ROM, still no luck. So I am hoping its just the SD card that broke. Would be strange if flashing a ROM would cause the SD card hardware inside the device to fail the next day.
Click to expand...
Click to collapse
Try to reformat the sd card with fat32. That helps sometimes.

Mikulec said:
Try to reformat the sd card with fat32. That helps sometimes.
Click to expand...
Click to collapse
My laptop has a SD reader but it doesnt even map the card to a drive like it usually does. Any tools that I can use?
I already ordered a 8 gig MicroSD which should arrive tomorrow.

I'm not ready to blame my Tilt for my mSDHC problems but it sure seems like theres a lot of posts out there here and other places about people having memory card problems with their Tilt. I"m going to try again but if another memory card fails I'm sending my tilt back and hopefully I can demand to at least upgrade to a Fuze for a cost.

Funny this thread came up as my 4 gig card crapped out on me recently and is unrecogniseable to any device after running the sdhc cab on it. But yea, 8 gig works just fine. Using a 16 gig now with smooth sailing

Related

Anyone has problems with 2 gig SD card in their 8125?

Everytime i insert my card it asks me if i want to format it to make it readable? - even though i formatted it in my computer. Also i cant write anything to it when my 8125 recognizes it in a slot. The cars is SanDisk so it should be a good quality.
I'm using a 2GB SanDisk card with no trouble at all. I _didn't_ format it on my PC but rather used it straight out of the box.
Do you still have the same message if you let the 8125 format the card?
i tried doing that and it says that the phone cannot recognize the card.... the weird thing is that the card goes in crooked and the fit isnt perfect i have to push it in hard.....
Quite a few people reporting a problem like this - seems to be fixed with sktools or storage tools (google them demos allow you to format - install on device) and format card on device to fat16.
meschle said:
Quite a few people reporting a problem like this - seems to be fixed with sktools or storage tools (google them demos allow you to format - install on device) and format card on device to fat16.
Click to expand...
Click to collapse
I have the same problem before, i tried to format it to fat16 and the 2gb minisd was recognized as 1gb instead of 2, tried every solution from getting compatible version of a card reader to re-format using fdisk via DOS., Called the manufacturer and they we're happy to replace it. They advised that it should be re-formatted as fat only and not fat16 via DOS using the card reader.
good to know as i just bought a 2gigger.
The problem is that you formatted it on your PC. USe SKtools to format it on your device and you should be all set. I think the demo version of SKtools allows you to do this stuff.
i use my 2 GIG since i bought the phone almost 4 months ago without any hassle.
Just used the card out of the box without formatting it.
This issue is reported several times and is caused by using a not compatible cardreader on the PC to format the card.
A lot of the (even usb 2.0!!) cardreaders is not capable of reading over 512MB memory cards. If you use a 1Gb or 2GB card on such a reader it will probably say the card is not formatted. WHEN you do format the card using that reader, you wil make it unusable.
:arrow: Make sure you format the card via a compatible cardreader to avoid this.
:arrow: If you get a 'card not formatted' message, try to read from / write to it in your device first (before attempting to format)
Just got my 2GB card....MDA won't read it.
Camera won't read it.
PC can read it. It was Fat32, I reformatted it to Fat...still a no go in the phone or camera, but works on the PC....what gives?
Just got my 2GB card....MDA won't read it.
Camera won't read it.
PC can read it. It was Fat32, I reformatted it to Fat...still a no go in the phone or camera, but works on the PC....what gives?
I have a SanDisk 2Gig card. It worked fine right out of the package. Haven't had any problems with any of the ROMs I've run on my 8125.
-Scott
my 2GB card works fine, except for the fact that it's stuck in there.. i need to tak it apart and fix the spring loaded latch somewhere in there..
I got a 2GB from Amazon: OEM 2GB MINISD Mini Secure Digital (SD) Card but it did not work on my Cing 8125.
TopRam
I have been using a 2GB miniSD made by TopRam. Works in the 8125 and with my USB card reader no problem since day one. 8125 recognizes the entire 2 gigs (well minus just a few bits...about 99% of the card). Got it off eBay while I was waiting for the phone in the mail. Never needed formatting or anything..worked straight from the package. I was a little worried at first that it wasn't one of the "well known" brands of cards, but there have been no problems whatsoever.
I'm using the Transcend 2Gb 80x MiniSD. Works like a charm.
Keep in mind that SLC flash chips (mainly made by Samsung and a.o. used by Transcend and Mobymemory) have longer lifetime, are faster and consume less power than MLC flash chips. Disadvantage is that SLC is more expensive. Bought my 2GB for approx 62 euros.

1G SD memory for XDA2i

Hi,
Does XDA2i support 1G SD card? I tried but it doesn't show up in the explorer.... Can someone help? Many thanks!!
bennykmh said:
Hi,
Does XDA2i support 1G SD card? I tried but it doesn't show up in the explorer.... Can someone help? Many thanks!!
Click to expand...
Click to collapse
1 GB Dane-elec Xs work fine on my Qtek 2020i(XDA2i)
you may format card before use
I have you tried any other card in your XDA IIi.
I have a DANE-ELEC 1 GB SD card and a INOV8 512 MB cards
and both work well.
Sorry I can't be of more help
Muzza
Kingston 2 GB (30651-001.A00LF p799861x01)work as well,
maybe i should have purchase a 4 GB :wink:
Scandisk 1GB SD card working fine!
transcend 2gb 150x absolutely fine work =))
maybe you have bad card? or maybe format it via cardreader can help..
My Kingston 2GB works great on the device, might be a case of a bad card for you, tried it on any other devices?
Worked
I use Kingston 1Gb SD card... 50x and it works fine... maybe your battery is dying
I think theres still a 4gb SD card at work which I'll give a go tomorrow if I get a chance.
I work at CeX in Brighton, England, and we get a lot of different types of memory cards in. So far I'm just using a standard SanDisk 512mb card, but will eventually get a 2 or 4gb (the 4gb we have is £120 >.<)
Kingston SD Card 1GB works fine on my XDA IIi. What brand do you use anyway?
XDA IIi definately supports up to 4gb (150x) cards.
I just got a "Topram' 4gb 150X...despite formatting both via card reader and my device it will not read...
Does it show the card size in the Memory cp? Or can you just not transfer files to and from it?
neither...as soon as I insert it into the 2i I am asked to format it to make the card ledgible...so I agree...but it still does not show up at all. Neither in memory size menu or file explorer.
I have formatted it via card reader on the compeuer too...It accepts files via card redaer so the card itself is ok.
But every single time I insert it into the PDA it asks me to format it again and it never shows up.
bit off topic but as anyone else had a problem with SD/MMC cards working for a while (sometimes as little as 6 months other times over a year) then totaly stopping ie show as not being there in any card reader, only to come back to life after about 12 months stuck in a draw. I have had this with 2 cards so far and got 1GB card in the draw at the moment which stopped working just as I put some important files onto it
SD Cards
I have a 4GB Transcend, 2GB SanDisk and a 512MB Unbranded and they all work perfectly fine in my xdaIIi, maybe your card reader is a bit iffy?
EDIT: By card reader I mean the bit that you insert the card into the xdaIIi
It may simply be certain makes of cards that work, and certain that dont. All you can do is hope the retailers let you try before you buy
Tom Swinnen said:
Scandisk 1GB SD card working fine!
Click to expand...
Click to collapse
i also have a SanDisk Ultra II 1GB in mine
XDA 2i - SDIO size - does anyone tried 4G?
Hi,
I want to buy 4G SD card to my XDA 2i, but I would appreciate if someone can tell me if he succeeded to work with 4G card.
10x
Dror
light said:
I just got a "Topram' 4gb 150X...despite formatting both via card reader and my device it will not read...
Click to expand...
Click to collapse
erm... u made sure u formated them as FAT not FAT32? i had no end of probs with my 2020 when i did that, and the 1gb unbranded card i have in my 2020i is FAT and works fine, as most hand helds and camera (i use it in my konica/minolta SLR digital, it hates FAT32 file systems too) format them as that and jobs a good one!

Need help! Micro Sd card died in my kariser!

Hi guys, this happend today. My vario III suddenly can't find the memory card and my pc won't open it when I use card reader as well. All I can think of is I was using the card to transfer data between PCs yesterday several times and my PC won't read it at alst, but it worked ok with my Vario II(kaiser).
Help Please! How can I bring my card back??
Sorry, forget to mention that it a 8G Sandisk card.
I just posted the same problem and I also have a 8 GB from sandisk.
try to use the original SD card, see what happens..
My kaiser couldn't find it either..
I already contacted HTC customer service (an hour ago)
..
Edit:
I have a dutch T-Mobile MDA Vario with the original firmware.
Also a hard-reset doesnt help.
thanks a lot. I am waiting for your reply.
Hi
I had encountered similar problem before. My 8GB card was not detectable in my TytnII and shows empty in my laptop.
What I did is use the freeware program ""PC Inspector File Recovery" to recover all the loss files. What I believe is that the file table or something like that is corrupt but all files are still in card. DO NOT copy new files to the card if you intend to recover files from your card.
Thanks very much, I will give it a try now. keep finger crossed.
How does that happen? any ideas?
I have made a poll to see how many Kaisers have the same problem.
http://forum.xda-developers.com/showthread.php?t=390086
Cheap 8GB microSD cards usually are not true SDHC. They are a 4GB card reformatted to 8GB so the directory shows up that capacity but no data can be loaded to the extent of its capacity.
Buy another one, this time from a trusted seller and move on.
For the record, the card I got is original sandisk card.
Actually it happened once before for my 2GB sandisk card on hw6515. Am not sure if the corruption got anything to do with activesync as there there is no way to remove the sync other than directly unpluging the set from the laptop.
Unlike thumbdrive where we can select the option of removing thumbdrive.
svcglobal said:
Cheap 8GB microSD cards usually are not true SDHC. They are a 4GB card reformatted to 8GB so the directory shows up that capacity but no data can be loaded to the extent of its capacity.
Buy another one, this time from a trusted seller and move on.
Click to expand...
Click to collapse
How do you explain that my Kaiser also didn't read the original SD card? What do you advise as being a 'trusted seller'? The Sd card was cheap indeed..
Ps http://forum.xda-developers.com/showthread.php?t=390086
Peran said:
How do you explain that my Kaiser also didn't read the original SD card? What do you advise as being a 'trusted seller'? The Sd card was cheap indeed..
Ps http://forum.xda-developers.com/showthread.php?t=390086
Click to expand...
Click to collapse
I was not replying to you but for the member en0u222f that started the thread and he knows what is a trusted seller...
pdaPhone_TM said:
Hi
I had encountered similar problem before. My 8GB card was not detectable in my TytnII and shows empty in my laptop.
What I did is use the freeware program ""PC Inspector File Recovery" to recover all the loss files. What I believe is that the file table or something like that is corrupt but all files are still in card. DO NOT copy new files to the card if you intend to recover files from your card.
Click to expand...
Click to collapse
Hi guys, I tried PC Inspector File Recovery and got the data I wanted back(there was 5~6 G on it but I only needed 2 M). My card come with N95 old version from O2 in UK, so I think it is a genuine branded sandisk card. After retrieving the data I tried to format my card and my PC allowed me to do that(it was impossible before I use PC Inspector), but after 5 mins it told me that windows can not format the card.
Anyway, I got the data back although the card is still dead.
Thanks a lot guys!
My 8G card would cost 50 pounds+ in the high street shops, don't understand why you guys say it's cheap....
en0u222f said:
My 8G card would cost 50 pounds+ in the high street shops, don't understand why you guys say it's cheap....
Click to expand...
Click to collapse
Worst yet, you got a fake 8GB with the cost of a good one.
Why did you not try to get a replacement? High street shops will exchange it easily.
en0u222f said:
Hi guys, I tried PC Inspector File Recovery and got the data I wanted back(there was 5~6 G on it but I only needed 2 M). My card come with N95 old version from O2 in UK, so I think it is a genuine branded sandisk card. After retrieving the data I tried to format my card and my PC allowed me to do that(it was impossible before I use PC Inspector), but after 5 mins it told me that windows can not format the card.
Anyway, I got the data back although the card is still dead.
Thanks a lot guys!
My 8G card would cost 50 pounds+ in the high street shops, don't understand why you guys say it's cheap....
Click to expand...
Click to collapse
Sorry, but as I mentioned before it came with N95 from a big phone company in UK called 'O2' . I don't think they will sell fake Micro SD cards.....
Have a card that is readable/writable/formattable on PC but does not even show up on the HTC. Any ideas?
bump
bumping thread because I am having the same issue. Few days ago my card slot died, tried many cards which all work on pc but dont come up on my tilt. I noticed theres a change in ram .03mb when I insert the card but if i go to storage memory in settings it will state not installed. Also inserting the card would bring the phone out of standby. I am guessing its a hardware issue and that theres a different switch or something that tells the phone that a card is in which is why it comes out of standby but the part that actually reads the card doesnt work, probably a loose wire or something. Can anyone post who has experience taking the kaiser apart, I am a hands on guy who wouldn't mind taking it apart to see what could be the problem.
p.s I also flashed roms/radios since this issue and that did not resolve it.
Wow. I'm also bumping because I have this same problem! Borys hit the nail on the head.
I've discovered the Kaiser is very intolerant of FAT filesystems with issues. I've had mine twice see the card, but no contents, even though it looked fine on my laptop.
I ran a filesystem check on it and both times it found some minor errors, and then it was fine.
No need for any special utilities, just run a disk check in Windows, fsck.vfat in Linux, etc..
khaytsus said:
I've discovered the Kaiser is very intolerant of FAT filesystems with issues. I've had mine twice see the card, but no contents, even though it looked fine on my laptop.
I ran a filesystem check on it and both times it found some minor errors, and then it was fine.
No need for any special utilities, just run a disk check in Windows, fsck.vfat in Linux, etc..
Click to expand...
Click to collapse
Ah! Same here. I'm going to revive this thread since I'm having the same problem. I ran disk check, but it still wont work I'm trying to do a recovery for the files right now.

Has anyone tried a Sandisk 16G SDHC?

I've searched the forum without much luck so hopefully I won't be flamed..
I am looking at getting either an 8G or 18G Sandisk microSDHC with adapter.. but wondered if anyone else had taken the plunge yet?
Thanks
erosco
*bump*
Isn't there anyone out there brave (nee dumb) enough to try out one of these?
Hello i have 8G Sandisk microSDHC Class 6, trinity dont work corectly, when i soft reset access ton the microSDHC is ok, but when long time arrive access to microSDHC is slow. i return to my "old" miniSD 2go an now access is ok.
microSDHC 8G work fine on touch HD i think my rom drivers is not ok for microSDHC.
erosco said:
I've searched the forum without much luck so hopefully I won't be flamed..
I am looking at getting either an 8G or 18G Sandisk microSDHC with adapter.. but wondered if anyone else had taken the plunge yet?
Thanks
erosco
Click to expand...
Click to collapse
Hello!
Tried with a sandisk 16GB SDHC micro. I formatted but the Trinity formatted only for 3 GB :-((.I formatted in a notebook for 16 GB, but the HTC saw the card as a 3GB one :-(
Now I should try another mini adapter, because my one is a little old (used for a 2GB microSD)
Any news on this? I just purchased a p3600 and 16 gb would make it the perfect Phone for me.
Someone else had an 8GB SDHC and in the the trin it showed 0gb but he was able to write/read the full 8gb. Maybe you could try to fill your card to the limit too.
I have a SanDisk 16GB SDHC which didnt work with the original ROM (also only saw approx 3 GB). But updating the ROM fixed it and it now works perfectly. So I guess its a driver thing only.
Wohoooo!
16gb sandisk is on it´s way.
which class is the Card (2,4,6)?
i want to know too. im guessing its a class 2.
I couldn´t find any other than class 2 too. So I guess it is class 2 but I decided to go for 8gb first and maybe upgade to 16gb in March/April when I expect the prices to drop because 32gb will be available in stores.
any link for update?
(shall I update the whole ROM or it's just a littla patch?)
working with WM5 only... (don't wanna upgrade for WM6 :-( )
HTC 6300 and SDHC 16G
Hi, My experience (2 days) is the following:
- PDA recognises the SDHC, with 15,5 GB (iso 16G but this is normal)
- I copied from an old backup lots of programs, etc using a PC and all files are seen by PDA and programs work fine...
- BUT I tried to move files and to install in SDHC card directly from PDA and it does not work.
I am now tying to find a driver or something, but not success for the time being.
(I am using a class 6, HTC P6300 with original WM5)
Hi again,
I heve rechecked and the only failing action is the SW installation in SDHC card (both from PC and from cab file).
Any idea about why installation is failing?
Thanks
Hi people,
I was brave enough to buy last week a Sandisk 16 Gb microSDHC class 2 to use on my HTC P3600. I'm using an old miniSD adapter and my cooked ROM is [PTG] WM6.5.3 OS 5.2.23554 (build 23554.5.5.0) by Antix. I have not installed any other custom sdhc drivers. It is using the original ones that come in the ROM.
I never formatted the card. Not on Trinity or PC. So it has the factory format. I just tested with H2testw to confirm that it was indeed a 16Gb card (I bought from ebay-30€) and also the write speed is 5.8Mb/s.
First impression was that the card worked flawlessly with 15185Mb recognized. I took some photos, installed programs directly to the card, all good.
But then I noticed that 1 in 5 times I reboot the phone, I see some missing icons and it says no storage card inserted. The icons are stored on the card that is why I miss them. To solve this I need to reboot the phone again.
Other than that it seems fine until now. I will update this topic if anything different happens.
Still I would like to hear if anyone has a flawless experience with Sandisk 16Gb microSDHC with some other ROM / drivers.

System properties not responding. SD card Missing! Had happened 3 times.

Here's the story and info.
I got the Blu R1 HD (prime special) went down to Target and bought thier DANE 64GB CL10 MicroSD for $20. Plugged it in and formatted it as internal storage. (A cautionary not then said, "if formatted as internal memory SD card will ONLY work in this device) I chose, who cares and continued.
Worked great for a day or two ... but then it happened ... it went missing! All the apps and data was gone. A notification popped up and said, "Transcendent SD card missing. reinsert this device". I did as the all knowing phone asked but to no avail, it wouldn't recognize it.
I rebooted the phone and a massage popped up saying "system properties not responding. Wait or Quit" I've tried both options, doesn't seem to make a difference.
I tried reformatting it in the phone and it wouldn't unmount. Tried on our computers (both pc and Mac) and neither computers were allowed access to the sd card to reformat it.
I then returned the sd card thinking that it might be flawed, got another one from Target and it worked great ... for about two weeks... Then went missing.
Did everything mentioned above. Got the new one and it worked for 4 weeks, thought my problems were over ... then the SD card ran away again and is now currently missing. The phone does not recognize that there is a sd card when looking for it in a file explorer. In settings it says the sd card is corrupted.
Is my phone messed up? I'd it the brand of SD card? Is there a way to make the phone recognize the sd card?
Please help me find my missing sd card.
Same problem, SD Card is showing as corrupted. I have it installed as internal storage and have for over a month with no problems. SD is a Patriot LX 64gb. I haven't changed anything on the phone. I have not fine anything but reseat the SD. Any help is massively appreciated!
Maybe the problem is using a 64GB MicroSD Card. The phone specs say it's supports up to 32GB only.
ytsejam1138 said:
Maybe the problem is using a 64GB MicroSD Card. The phone specs say it's supports up to 32GB only.
Click to expand...
Click to collapse
That is incorrect it supports 64GB SD, many report success with 128GB cards, so I doubt its an issue with size...
RainbowMagicMarker said:
Same problem, SD Card is showing as corrupted. I have it installed as internal storage and have for over a month with no problems. SD is a Patriot LX 64gb. I haven't changed anything on the phone. I have not fine anything but reseat the SD. Any help is massively appreciated!
Click to expand...
Click to collapse
Is good to know I'm not the only one!
Have you been able to reformat the sd card? Or will it not allow you to do so?
Allron said:
Is good to know I'm not the only one!
Have you been able to reformat the sd card? Or will it not allow you to do so?
Click to expand...
Click to collapse
I have not tried, I'm clinging to hope I might be able to salvage my pictures.
Allron said:
Is good to know I'm not the only one!
Have you been able to reformat the sd card? Or will it not allow you to do so?
Click to expand...
Click to collapse
Okay I caved and tried to reformat it, and all it does is fail, or drops off half-way as though I had removed the card. If I try to put the card in my computer or any other device it just straight doesn't exist, doesn't even say it isn't compatible or anything, just straight doesn't exist. Think the card is just bad, gonna return it and get a new one, will see what happens.
I have had a SANDISK Micro SDXC UHS-1 64GB CARD in mine for almost 5 months now and no issues.
I see I'm not the only one with this issue, although mine is a little different... I got a generic 128gb card and plugged it in, has been issue free for months... BUT, lately and for what seems like no apparent reason, the card guess missing... Rebooting the phone sees the card again with all apps and photos intact. It could be weeks/days/hours/minutes before it happens again... Shortest turn around - about 10 minutes. Longest - about 2 weeks... Haven't tried plugging the card directly into my computer yet, but when it is mounted on the phone it works fine (until it goes missing). Thought maybe it was because it was a cheap card...

Categories

Resources