Database Develop

[Release] WM 6.1 -T-Mobile Address Book

Hey Guys,
For those who want to sync their contacts, tasks, and calender data onto t-mobile's servers using their HTC Shadow WM 6.1 device(s), this is the ported application needed to do so.
Note: This is the final release for T-Mobile Address Book. It is uninstallable and apperantly bug free.
###########
#ASSUMPTIONS
###########
1.) You are using Windows Mobile 6.1 By ND4SPD
2.) You are planning to install this on an HTC Juno (T-Mobile Shadow)
3.) You understand that I take NO responsibility if your phone breaks, kisses you, or you are not happy with this product. Hence, you can't sue ColoradoTechServices.
###########
#INSTALLATION
###########
1.) Connect via ActiveSync
2.) Upload CAB to your phone
3.) Run CAB and Install
4.) Disconnect from ActiveSync
5.) Restart Phone if you want
6.) Make sure that T-Mobile Data and T-Mobile MMS are configured properly
7.) Make sure Data Connection is active
8.) Open T-Mobile Address Book in Menu, try to sync. If it doesn't work the first, try again. If it fails after the third time, tell me.
#####
#BUGS
#####
None

Great work! Now for some feedback..
It was a little confusing with the YES and NO responses.. I assumed all the good stuff was in the voxmobili folder, so I copied that over to my Windows folder and hit Yes to All to copy the entire directory. So far so good. Launched the program. Everything goes ok, until the very end where I get a Synchronization not successful with the error "Authentication failed."
Soo.. the question is, was there anything in the folder that serves to authenticate my number? I wouldn't think so. But that's what happened to me. Any thoughts?

I'm not aware of any authentication process.
First, are you using ND4SPD's 1.0 Developer's rom?
Second, what are your GPRS settinsg for T-Mobile Data and T-Mobile MMS. Are you using a proxy of any kind? If so, how is it setup?
Third, check if Data Connection is enabled.
-----------------------
Regarding the Yes and No part. The 6.1 rom has its own stock voxmobili folder. While the T-Mobile 6.0 has its own, plus the t-mobile address book application, graphics and dll's. I didn't want you to overwrite any of the files from 6.1 since they might possibly be newest then the ones from the older rom. That's why I asked you not to overwrite files already on your device.

Hey it worked! From my last post to this one, I did precisely three things - try to synchronize three more times. Two times it gave me the error, and on the third try it went right through. So the problem was on T-Mobile's side.
So even a Yes to All and overwriting all the files in my directory worked.
I am using the 4.1 beta ROM.

Hey,
Well I'm happy that it worked. Copying the older files isn't problamatic. I'm just not sure if their is a difference between the newer ones and the older ones. Wi'll find out soon. Anyways, it won't matter after I clean up the archive. Now I have to figure oout how to make a cab file.

Hmm...Any updates for this?
I really don't want to mess up my phone by using this.

tissle said:
Hmm...Any updates for this?
I really don't want to mess up my phone by using this.
Click to expand...
Click to collapse
What "update" are you looking for? All the information you need is right here in the posts.

You won't screw up your phone at all. The app works perfectly fine. I promised to release the final version, but I just haven't had time. Maybe today I'll release an uninstallable version.

Look on top for final release.

Hey man, I tried it and it seems to be not working.
I got the 19.99 T-Mo internet...and well I don't have the T-Mobile Data.
I just have T-Mo WEB for internet and I belive thats the issue.
My internet works and all, I'm Palringo, I can access google maps.

Whenever I try to sync my contacts to my phone it sends me a text message.

can this work for the wing

Man, I would love to use this app, but I have no idea how to make it work with the 19.99 plan.

Same here . ..
CreativeRoyalty said:
Whenever I try to sync my contacts to my phone it sends me a text message.
Click to expand...
Click to collapse

noone1569 said:
Same here . ..
Click to expand...
Click to collapse
What does the text message say? Can you sync at all?

I no longer get the text message, but I still cannot sync. I get a Communication error every time I try to sync it. I have unlimited internet plan and can browse the web just fine. I do not understand why it doesn't work. Any suggestions?

TYTN 2 & the 3 network skype

Hi everyone,
i went to a 3store today to get a TYTN 2 on 3 network UK. I thought we could use the free skype minutes they offer on other handsets, but they said no, use the wifi!!!
I was wondering if anyone knows a way to connect to their skype service. Thanks
PS: Please include links to any software or recent methods you might know.

Hi, I'd also like to know if this possible. Have a 3 PAYG sim and get 30 days free skype when I pay for the internet add-on but cannot work out how to use the 3G network for my calls. Cheers

I think fring will do what you want.
The website says you can make skype calls.
www.fring.com "fring is based on a unique thin-client technology that for the first time enables true VoIP over 3G, GPRS and WiFi networks"
I installed it on my stock rom AT&T Tilt (Kaiser) but have not tested.
I hope that helps.
j

any java skype client in the uk?
jlewisdaville said:
I think fring will do what you want.
The website says you can make skype calls.
www.fring.com "fring is based on a unique thin-client technology that for the first time enables true VoIP over 3G, GPRS and WiFi networks"
I installed it on my stock rom AT&T Tilt (Kaiser) but have not tested.
I hope that helps.
j
Click to expand...
Click to collapse
Thanks but i think for that you should have access to the internet. I can easily use the skype program instead. The problem is that skype is not the type of skype 3 network is using ( they use a java based program).
I read an article and someone had used the skype from a LG phones with 3 and Esmertec Jbed, but that was an Australian version. does anyone have a UK version?

This would rock if it is possible! Anyone know where to download a UK version?

I think we need to find someone with a non nokia phone from 3 UK, so he can give us the jar file. preferably LG
What do you think?

anyone from uk? or anyone knows a professional UK website? please

Anyone found this?

Can anyone with a TyTn II from the 3 network confirm if it comes with Planet 3 and Skype software installed?

I use Three...
Ah, you forgot to read the ultra-small fine print that states that the offer for *all* phones has expired and it's now only on *selected* handsets that seem to exclude the TyTN 2, also you can't get the sim-only and install the Three free Skype or Live Messenger on a non-Three phone+rom without some custom ROM hacking.
To make matters worse, if you get the £5 Unlimited Internet Access, the small print is that Three block Skype and Live Messenger so they can't be used (thought I think you can buy the £10 option that allows them?) - even if you want to pay for them outside the unlimited bundle. You can use IM+ BeejiveIM etc, to access Live Messenger though, and as far as I'm aware it seems to be included in the Unlimited access...
Oh, and if you want to access Planet3/My3 on your phone you can do so, but first you need to go into Advanced Config and change your "User Agent Custom Base" to "HTC_TyTN_II Mozilla/4.0" and then use the URL "http://mobile.three.co.uk/837_sc/index.do"
The Planet3/My3 will only work when accessing the page though the 3 connection and not WiFI or ActiveSync, but is acuttaly pritty nifty at checking you accound balance, tops ups, addons and such like.

Percz said:
Ah, you forgot to read the ultra-small fine print that states that the offer for *all* phones has expired and it's now only on *selected* handsets that seem to exclude the TyTN 2, also you can't get the sim-only and install the Three free Skype or Live Messenger on a non-Three phone+rom without some custom ROM hacking.....
Click to expand...
Click to collapse
Thanks a lot for the information you provided. Damn it, I made a big mistake as i could've got the Nokia N95 with Skype and Live Msg + unlimited internet for £5 cheaper every month...!

Hi guys,
This is a solution for the Skype on Three network issue. I had placed it on another forum (http://www.3g.co.uk/3GForum/showthread.php?p=385677) and one guy has reported it working, but apparently, it might not work with WM5, only with WM6. Please give it a whirl and let me know if it works for you.
Feedback is great for both me as well as others
**********************************************************
Annuntio vobis gaudium magnum
(I have great and joyous news)
I believe that I have succeeded in getting the native Iskoot WM6 client for Skype to connect to the Three/3 service. I am still testing it and would appreciate your feedback.
Steps
a) Download and install the Iskoot client for Windows Mobile 6 . Try the direct link here (http://www.iskoot.com/pc_download/Wi...1.54_WMpro.CAB)
b) After installation, start the application, but DO NOT sign in. Instead exit it. The reason for doing this is to create the default registry entries for Iskoot.
c) Now start your favourite registry editor (I personally use Resco Registry Editor, but you should be able to use any. Please do not ask me how to use the registry editor. This is not the appropraite forum.)
d) Head for the following location in the registry: HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE
e) Update all the following entries to the same value "http://mobile.three.co.uk/948" (do not include the "double quotes")
BackupHost
CallUrl
DefaultSkHost
Pushhost
f) Exit the registry editor of choice and start and log into Iskoot. This might take some time. It took me about five minutes.
It should now be configured to connect to the 3 Skype service. To cross-verify, check that the registry key HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\Cal lNumber has the value +447838333894 (the 3 Skype dial-out number). It should be automatically added by the software.
As I have mentioned earlier, I am still testing this. However, with this implementation, it should not use your included minutes, but the free Skype allocation. Please test the same and let us all know if that is the case or you have noticed that your inclusive minutes have been used up.
I do not know how to modify cabs. But if somebody can rebuild the original Iskoot cab with these settings built-in, that would be great.
I have noticed that the sound quality on this is considerably better as compared to the Skype Java client.
Legalese: The above is merely advisory and there is no warranty, implied or otherwise, for the same.
**********************************************************

Thanks for the information. I tried it on my Hermes and it worked great.
Unfortunately, when I tried the same thing on my Kaiser, all I ever get is "Currently unable to connect".
I can't see why there would be any difference between the two phones, but the Hermes never fails and the Kaiser never succeeds!
Any suggestions?
Thankshttp://forum.xda-developers.com/images/icons/icon7.gif

stooby said:
"Currently unable to connect".
Click to expand...
Click to collapse
thanks for the info but unfortunately i get the same error meesage as i am using !!

secret.simon said:
Hi guys,
This is a solution for the Skype on Three network issue. I had placed it on another forum (http://www.3g.co.uk/3GForum/showthread.php?p=385677) and one guy has reported it working, but apparently, it might not work with WM5, only with WM6. Please give it a whirl and let me know if it works for you.
Feedback is great for both me as well as others
**********************************************************
Annuntio vobis gaudium magnum
(I have great and joyous news)
I believe that I have succeeded in getting the native Iskoot WM6 client for Skype to connect to the Three/3 service. I am still testing it and would appreciate your feedback.
Steps
a) Download and install the Iskoot client for Windows Mobile 6 . Try the direct link here (http://www.iskoot.com/pc_download/Wi...1.54_WMpro.CAB)
b) After installation, start the application, but DO NOT sign in. Instead exit it. The reason for doing this is to create the default registry entries for Iskoot.
c) Now start your favourite registry editor (I personally use Resco Registry Editor, but you should be able to use any. Please do not ask me how to use the registry editor. This is not the appropraite forum.)
d) Head for the following location in the registry: HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE
e) Update all the following entries to the same value "http://mobile.three.co.uk/948" (do not include the "double quotes")
BackupHost
CallUrl
DefaultSkHost
Pushhost
f) Exit the registry editor of choice and start and log into Iskoot. This might take some time. It took me about five minutes.
It should now be configured to connect to the 3 Skype service. To cross-verify, check that the registry key HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\Cal lNumber has the value +447838333894 (the 3 Skype dial-out number). It should be automatically added by the software.
As I have mentioned earlier, I am still testing this. However, with this implementation, it should not use your included minutes, but the free Skype allocation. Please test the same and let us all know if that is the case or you have noticed that your inclusive minutes have been used up.
I do not know how to modify cabs. But if somebody can rebuild the original Iskoot cab with these settings built-in, that would be great.
I have noticed that the sound quality on this is considerably better as compared to the Skype Java client.
Legalese: The above is merely advisory and there is no warranty, implied or otherwise, for the same.
**********************************************************
Click to expand...
Click to collapse
The iskoot link is http://www.iskoot.com/pc_download/WindowsMobile/iSkootForSkype1.1.54_WMpro.CAB
How do you get the address http://mobile.three.co.uk/948? I am looking for the same thing for three italy, so I cannot use that url. I have Kaiser and a three skypephone, wich include 10 hours per day of free skype call, so I will love to use the iskoot software on Kaiser and lunch outside the windows the Amoi!
Thanks

Masy said:
thanks for the info but unfortunately i get the same error meesage as i am using !!
Click to expand...
Click to collapse
For Windows Mobile 6.1, MS .net Framework 3.5 is required, otherwise, "Currently unable to connect" error might appear
SkypeOut is officially supported (if not, very soon) by 3UK,
http://www.skype.com/intl/en-gb/allfeatures/3skypephone/overseascalling/
with some restrictions (read the small print!)
I failed to get Skypein to work, however.
And Skypeout is a bit unstable at the moment, might be 3UK is upgrading their servers...

alex_time said:
How do you get the address http://mobile.three.co.uk/948? I am looking for the same thing for three italy, so I cannot use that url. I have Kaiser and a three skypephone, wich include 10 hours per day of free skype call, so I will love to use the iskoot software on Kaiser and lunch outside the windows the Amoi!
Thanks
Click to expand...
Click to collapse
I think what some people did is to download a java version of the iskoot (for other non-WM phone) and decompiled the java class/jad file and find the URL string. I guess if you can somehow intercept the outgoing network traffic from a 3 customized iskoot client running on another phone (perhaps on a Symbian phone trying to communicate to the server via wifi, which wouldn't connect successfully I believe, but still let you), parse the network packet to find out its intended destination will do the trick too.

deityuk said:
I think what some people did is to download a java version of the iskoot (for other non-WM phone) and decompiled the java class/jad file and find the URL string. I guess if you can somehow intercept the outgoing network traffic from a 3 customized iskoot client running on another phone (perhaps on a Symbian phone trying to communicate to the server via wifi, which wouldn't connect successfully I believe, but still let you), parse the network packet to find out its intended destination will do the trick too.
Click to expand...
Click to collapse
Thanks for the tip, but the problem is that the only phone with skype is the amoi 8512 (http://www.3skypephone.com/english/index.html have you ever seen it?) I do not have x-series with skype, but a specific offer wich works only with this phone. This phone does not have wifi, so I cannot sniff packet through network, and the iskoot client is not java, but specifically made for it (when I run it, the Java log does not apper), so I do not know how I could extract the url. The only thing I have done is to get its user agent to replace it on the Tytn II, the Amoi 8512 user agent is " [FONT=&quot]Amoi 8512/R22.0 NF-Browser/3.3[/FONT]" without double quote, of course.

alex_time said:
Thanks for the tip, but the problem is that the only phone with skype is the amoi 8512 (http://www.3skypephone.com/english/index.html have you ever seen it?) I do not have x-series with skype, but a specific offer wich works only with this phone. This phone does not have wifi, so I cannot sniff packet through network, and the iskoot client is not java, but specifically made for it (when I run it, the Java log does not apper), so I do not know how I could extract the url. The only thing I have done is to get its user agent to replace it on the Tytn II, the Amoi 8512 user agent is " [FONT=&quot]Amoi 8512/R22.0 NF-Browser/3.3[/FONT]" without double quote, of course.
Click to expand...
Click to collapse
I was in your situation until a week ago when I found the 3 UK setting. It is so frustrating that I knew all it requires is a correct URL address yet I didn't know what it is!
What you may want to try is to first identify which X-series phone that 3 Italy support apart from the skypephone. And then change your Tytn II 's broswer agent string to one of those phone that use a JAVA iskoot client instead of a native client like Symbian client. Then use your phone browser to 3 ITA portal and try to download the iskoot (Skype) software. 3 ITA server should now think that you have a compatible phone so it will present you with the Java client. Once you go the .jar file, you can proceed to extract the URL from there...
I think people used SEW910I to get the 3 Australia client.
Try this for the Browser agent string:
SonyEricssonW910i/R1CA Browser/NetFront/3.4 Profile/MIDP-2.1 Configuration/CLDC-1.1
I tried the above suggestion myself to try to get the URL from 3 UK's client, but I can't remember why I stopped, and then later I found that the URL is already know on some other forums on the Internet...
Good luck!

deityuk said:
I was in your situation until a week ago when I found the 3 UK setting. It is so frustrating that I knew all it requires is a correct URL address yet I didn't know what it is!
What you may want to try is to first identify which X-series phone that 3 Italy support apart from the skypephone. And then change your Tytn II 's broswer agent string to one of those phone that use a JAVA iskoot client instead of a native client like Symbian client. Then use your phone browser to 3 ITA portal and try to download the iskoot (Skype) software. 3 ITA server should now think that you have a compatible phone so it will present you with the Java client. Once you go the .jar file, you can proceed to extract the URL from there...
I think people used SEW910I to get the 3 Australia client.
Try this for the Browser agent string:
SonyEricssonW910i/R1CA Browser/NetFront/3.4 Profile/MIDP-2.1 Configuration/CLDC-1.1
I tried the above suggestion myself to try to get the URL from 3 UK's client, but I can't remember why I stopped, and then later I found that the URL is already know on some other forums on the Internet...
Good luck!
Click to expand...
Click to collapse
You are right, it is frustriating knowing I cannot use my Kaiser just because I do not know a simple url!!
I will have a look at this right now. Thanks for your help

3 (UK) MSN/Live Messenger on Kaiser

I am trying to run a 3 (UK) MSN/Live Messenger on my official O2 WM6.1 Kaiser. (The reason for trying is that with 3 (UK) the operator, your MSN messages doesn't count towards your data traffic; also I would like to experiment its battery drain compare to other MSN clients).
If I just log in Planet 3 (UK) (the 3 portal site), it wouldn't let me download its Live messenger client as my phone is not a compatible one. I changed my user agent string to SEW910i and downloaded the .jad file for W910i. I then removed the certificate portions (the last 2 lines) in the .jad file so that it can install on my Kaiser. It works but sometime the display is not quite way, but more importantly, only vibrate alert is possible but setting to Loud or Soft alert would still result in vibration only. I then modified the .jad file again so that instead of referencing the mp3 files from the 3UK website, it point to the local version (which I downloaded and place in the same directory as the .jad and .jar files) as:
AlertToneContact: online.mp3
AlertToneMsg: newmsg.mp3
However, it still doesn't work :-(
Is there anything I have missed?
May be I should have used the N95's version? Has anyone tried that before? Are they different? And what would be the best version?
Thanks!

SMS push on 3 Live Messenger
Also, one of the feature of the 3 (UK) MSN messenger which I Have tried on my other symbian phone is that even if the client is closed (not minimized), it can still be re-activated/re-launched automatically when new MSN messenges arrive (by listening to special SMS messages form the operator (3 UK)), if one didn't choose to sign out form the MSN server.
I notice in the .jad file there is such a line:
MIDlet-Push-1: sms://:3716, ui.Main, *
Is this a Symbian's Java virtual machine feature? Or is it a general java virtual machine feature?

deityuk said:
I am trying to run a 3 (UK) MSN/Live Messenger on my official O2 WM6.1 Kaiser. (The reason for trying is that with 3 (UK) the operator, your MSN messages doesn't count towards your data traffic; also I would like to experiment its battery drain compare to other MSN clients).
If I just log in Planet 3 (UK) (the 3 portal site), it wouldn't let me download its Live messenger client as my phone is not a compatible one. I changed my user agent string to SEW910i and downloaded the .jad file for W910i. I then removed the certificate portions (the last 2 lines) in the .jad file so that it can install on my Kaiser. It works but sometime the display is not quite way, but more importantly, only vibrate alert is possible but setting to Loud or Soft alert would still result in vibration only. I then modified the .jad file again so that instead of referencing the mp3 files from the 3UK website, it point to the local version (which I downloaded and place in the same directory as the .jad and .jar files) as:
AlertToneContact: online.mp3
AlertToneMsg: newmsg.mp3
However, it still doesn't work :-(
Is there anything I have missed?
May be I should have used the N95's version? Has anyone tried that before? Are they different? And what would be the best version?
Thanks!
Click to expand...
Click to collapse
can i have the oridginal file you had?

Any progress on this?
Im trying to get it to work in Australia, but the 3 MSN java app is running but i cant see it at all.

I've tried the same app and found it very flaky
I have another slight problem, can I ask you to check - I can only login to MSN on 3 if I have a 3g connection.
Where we live the 3g connection is flaky and it refuses to login to MSN on GPRS :-(
Skype wise it works fine (they offer free skype-skype too) don't use their java client, look on this site for instructions how to configure the PPC / Wmobile iSkoot Client :0 tested and it's not used any data allowance.

Thanks,
I already have skoot running using my skype call allowance.
My Kaiser already has Live Messenger, but not the unlimited one.
Was trying to get it running as a pet project.

I have just switched to Three UK PAYG and have been searching around a bit. I am running a WM6.1 ROM on a Hermes.
So far I have managed to:
1) Use HTC Connection Wizard (downloaded via CRC's Device Update) to set up the internet and MMS settings.
2) Run the 'Identify as N95 (WM6.1).cab' (thanks to sub69 in this thread. 6.0 and 6.5 versions can also be found there.)
This allows me to access the My3 pages at http://mobile.three.co.uk/hb/HutchKey
3) Install the 3 Live Messenger Java client. I am using the version 4.5, not the latest V5. Credits for modifying this go to therafiman at MoDaCo.
This is working with Esmertec Jbed, and is working for free as it is meant to.
'Windows_Live Messenger.zip' contains the .jad and .jar files, and only seems to work if both are copied to the phone and the .jad file is run.
The Java client is far inferior to the normal Windows Mobile Live client, but the normal client is not free to run. Additionally I have been unable to log on using the normal client over 3g. If I log on while connected to activesync or wifi then I can switch to 3g and keep it running, but this will be charging you.
I haven't looked at skype yet, because no one I regularly call uses it. However I have found these instructions which look promising despite the dodgy numbering system:
1) First you need to download the Iskoot version of Skype from www.iskoot.com. You'll need to enter your name & mobile number and select your phone type.
2) Once downloaded, install ISkoot on your windows mobile
3) Start up Iskoot but don't log in yet.
4) Exit Iskoot
3) Use a registry editor to change the following keys under HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE to "http://mobile.three.co.uk/948"
BackupHost
CallUrl
DefaultSkHost
Pushhost (only if it exists)
4) Exit the registry editor and start Iskoot again. This time log in (mine logged in immediately - some people say their first log-in takes a few minutes).
5) That's it!. You can verify if things have worked by examining registry key HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\Cal lNumber. If ok, this should have been updated to either "123" on your first log-in, then to a number beginning +44783833...
Once you've made a few skype calls you should see that your credit / call-time balance / data allowance does NOT decrease.
Click to expand...
Click to collapse
(instructions from Shaun L at www.3g.co.uk

If anyone has any luck getting the V5 Java Live Messenger client running on windows mobile then please post, or even better would be configuring the normal live client to use 3's free service.
EDIT
I'm attaching the WLM V5 .jad and .jar files.
These are unmodified, and downloaded using the N95 user agent in the previous post. Maybe someone knows what they are doing to modify the .jad and get it working.

jez83uk said:
I have just switched to Three UK PAYG and have been searching around a bit. I am running a WM6.1 ROM on a Hermes.
So far I have managed to:
1) Use HTC Connection Wizard (downloaded via CRC's Device Update) to set up the internet and MMS settings.
2) Run the 'Identify as N95 (WM6.1).cab' (thanks to sub69 in this thread. 6.0 and 6.5 versions can also be found there.)
This allows me to access the My3 pages at http://mobile.three.co.uk/hb/HutchKey
3) Install the 3 Live Messenger Java client. I am using the version 4.5, not the latest V5. Credits for modifying this go to therafiman at MoDaCo.
This is working with Esmertec Jbed, and is working for free as it is meant to.
'Windows_Live Messenger.zip' contains the .jad and .jar files, and only seems to work if both are copied to the phone and the .jad file is run.
The Java client is far inferior to the normal Windows Mobile Live client, but the normal client is not free to run. Additionally I have been unable to log on using the normal client over 3g. If I log on while connected to activesync or wifi then I can switch to 3g and keep it running, but this will be charging you.
I haven't looked at skype yet, because no one I regularly call uses it. However I have found these instructions which look promising despite the dodgy numbering system:
(instructions from Shaun L at www.3g.co.uk
Click to expand...
Click to collapse
which version of Esmertec Jbed is it working on with kaiser as there's a lot of different versions and i dont no which is compatible with my kaiser also installed it on my standard java application sines in but have to keep allowing things cant remember now but if i click bottom option keeps coming up again and again i click top option don't come back but either way i get 3 contacts or 5 online no more when i no there a lot more
cheers to any replies

On my Hermes I'm using Jbed Build ID: 20080610.2.1 downloaded from CRC's Device Update.

jez83uk said:
On my Hermes I'm using Jbed Build ID: 20080610.2.1 downloaded from CRC's Device Update.
Click to expand...
Click to collapse
http //xdaonthree . tk
A website dedicated to all the above Xda Developers.
Thanks guys. Made my year!
Not allowed to post URLs as a newbie so will have to join the gap in the URL yourselves ;-)
foxtrotyankee

foxtrotyankee said:
http //xdaonthree . tk
A website dedicated to all the above Xda Developers.
Thanks guys. Made my year!
Not allowed to post URLs as a newbie so will have to join the gap in the URL yourselves ;-)
foxtrotyankee
Click to expand...
Click to collapse
Thanks for taking the time to put this together. Hopefully it will help others in the future.
Heres a direct link for people if needed: http://xdaonthree.tk/

Nice idea
Really wish I could get hold of the three apps for Android now

damianiw said:
Nice idea
Really wish I could get hold of the three apps for Android now
Click to expand...
Click to collapse
Is it the Iskoot for Android your after?
if so: http://forum.xda-developers.com/showthread.php?t=538306
My post has an Alpha/Beta that needs testing for Android.
upon request it was re-instated, there is an official version out there but i didnt get it to work properly, so i grabbed the original Iskoot for Android (non 3 version) and modified it slightly to incorporate the 3 uk settings

JavaAuthorizer
An excellent application if you don’t want to keep saying “Yes, allow NET access”
Thanks to the people who provided this.
http:// my-xda.blogspot.com/2009/10/change-untrusted-java-applications-on.html

Hi, can I somehow set ebuddy to the same settings and use it for free like windows live on 3 network?

[ABANDONED] [REF]Three Uk Iskoot Regmod CAB v0.2 & Full Installer v1.0

PLEASE NOTE, THIS THREAD HAS BEEN TEMPORARILY ABANDONED :-(
due to Iskoot stopping their "Iskoot for Skype" and the Three network starting to use a new client
the versions in this post DO NOT WORK, this thread will remain abandoned till i can find someone with a working Windows
Mobile version of the Skype for 3.
See you round the forums ;-)
ORIGINAL THREAD:
Hi,
Originally i created a small regmod cab which automatically puts the 3 UK Iskoot settings in so you dont have to bother, Now I have created a full installer cab which will install both Iskoot and the Regmod together.
This means no more faffing about installing the Iskoot and the Regmod, its all done for you in one nice CAB!
This little installer saves me a bit of time as I tend to update my ROM quite a lot, so it saves the need for installing a regedit program and manually entering/copying the values into the registry.
Additional:
I do tend to use the Iskoot app quite a lot, infact its the main form of communication between me and my wife, so if you have any issues just post and i'll do my best to replicate the problem and solve it.
Full installer instructions
__________
1. make sure you have .NET CF 2 or higher installed, and the Time is correct.
2. Install the Iskoot for 3 installer CAB (Link at bottom of post "iSkootfor3UK-DANH2009.zip")
3. Sign in
4. Use Iskoot
Regmod Installation:
__________
1. install all prerequisites -> Iskoot, .NET CF 2 (or higher)
2. Run iskoot and accept all the T&C's
3. Exit ISkoot
4. Run Cab file, use all defaults upon installation.
5. Run Iskoot and log on
Android Install
_____________
Note: reposted my APK due to request =)
Warning... it is extreme beta, and I have stopped working on this for the moment.
APK is available at bottom of this post as an attachment.
also i didnt realise that the original 3 Iskoot APK was already available on here.
Link can be found here:
http://forum.xda-developers.com/showpost.php?p=4959862&postcount=1
Technical Gore (regmod):
_____________
This CAB file makes the following modifications to the registry:
[HKEY_CURRENT_USER\Software\iSkoot\Skype\Device]
"BaseUrl"="https://skype340.three.co.uk"
"UpdateFrequency"="1200"
"PushHost"="http://skype340.three.co.uk:8880"
"SkypeOutEnabled"="1"
"DefaultSkHost"="http://mobile.three.co.uk/948"
"CallUrl"="http://mobile.three.co.uk/948"
"BackupHost"="http://mobile.three.co.uk/948"
"WLanPassword"="wifidemo2"
"WLanUserName"="wifidemo2"
"WlanServer"="dev10.iskoot.com"
"VersionRestrict"="N"
"IsPushEnabled"="N"
"ChatMsgHistorySize"="8"
"ChatMsgOldHour"="2"
"SoundFile"="\\Windows\\online.wav"
"Language"="EN"
"DriverName"="PocketPC"
"MaxChatSize"="10"
"MaxChatSession"="10"
"PropertyFilePath"="\\IskootIni.txt"
"ClientVersion"="1.1.54"
You may notice that a few entries are missing, most are unneeded at the point of install and connection, the needed ones will automatically be picked up upon connection to ISkoot.
Bugs Regmod:
_____
on installer it asks for a path (device/card), i thought id disabled the choice but its still there.
upon installation the installer reports that the cab file wasnt made for the phone, im looking into how to get rid of this.
Bugs for Full installer:
teeny tiny issue - no alert sound is set for incoming messages.
to fix go to sounds & notifications -> notifications and give ISkoot something to play!
I'll correct this asap.
Revision information Regmod:
_________________
V0.1
Installation of Regmod stopped skype functioning due to the "firsttime" entry being filled.
v0.2
working, and tested quite a lot.
ommited callnumber as this is picked up from network.
Revision information Full Installer:
v1.0 (possible final if all is well and no bugs are found)
Added various registry links, got installer to copy regmod into my docs incase you need it again.
managed to overcome bug which iskoot crashed on the full installer when receiving calls.
Troubleshooting:
______________
Unable to connect issues:
1. Time/Date incorrect
1A. Correct your time (start -> Settings -> Clocks and Alarms)
2. .Net compact Framework not installed
2A. Install .NET Compact Framework (google search .net CF and you should find the installer)
Reliability mod:
____________
I have found that if you set the data connection to "always on" it seems to make messaging more reliable.
You can do this by getting Kaisertweak and enabling "Always on: 3 internet"
If there are any other issues just post.
If you like my work and want to buy me a whiskey Click Here
Mirror for Full installer: Iskoot for 3 uk (4shared link)

Thanks for this, I too flash regularly and left iskoot on the shelf because of it
Only annoyance I find is that where I live 3g signal is poor and it doesn't seem to connect over GPRS (Windows Live Mobile has the same problem - the java free on 3 version & official .cab windows live mobile one!)
I guess they block some traffic over gprs
Anyway - this is a keeper thanks

Thanks for this, I too flash regularly and left iskoot on the shelf because of it
Only annoyance I find is that where I live 3g signal is poor and it doesn't seem to connect over GPRS (Windows Live Mobile has the same problem - the java free on 3 version & official .cab windows live mobile one!)
I guess they block some traffic over gprs
Anyway - this is a keeper thanks

Danh2009 said:
Hi,
Ive created a small easy to use CAB file which Automates the input of the neccessary Registry modifications for using ISkoot for Skype on the "3" Uk network.
This little installer saves me a bit of time as i tend to update my ROM quite a lot, so it saves the need for installing a regedit program and manually entering/copying the values into the registry.
Installation:
__________
1. install all prerequisites -> Iskoot, .NET CF 2 (or higher)
2. Run iskoot and accept all the T&C's
3. Exit ISkoot
4. Run Cab file, use all defaults upon installation.
5. Run Iskoot and log on
[
If there are any issues just post.
Click to expand...
Click to collapse
I have installed as described but during login iskoot shows a message "CURRENTLY UNABLE TO CONNECT". It was running ok before i hard reset. Btw I have .net CF 3.7 pre Installed with my modified rom. Please help........
EDIT: i removed i skoot, reinstalled .net cf 3.7 as i cant install 3.5. reinstalled iskoot and ur cab. but no luck

a few checks first:
Did you run Iskoot and accept all the terms and conditions before installing the cab?
also, are you using iskoot in the UK?
I have no problem with the installer, I just used it last night and it worked fine.
may be worth while using the Netcfg app to force iskoot to use net CF 2.0 as Ive never properly tested with 3.7, it seemed to work last time I used a cooked rom with 3.7.

Danh2009 said:
a few checks first:
Did you run Iskoot and accept all the terms and conditions before installing the cab?
also, are you using iskoot in the UK?
I have no problem with the installer, I just used it last night and it worked fine.
may be worth while using the Netcfg app to force iskoot to use net CF 2.0 as Ive never properly tested with 3.7, it seemed to work last time I used a cooked rom with 3.7.
Click to expand...
Click to collapse
I also used with same cooked rom last time, WORKED PERFECT!!! yes, I accepted all terms and conditions first and before login i exit iskoot and i am using UK 3 network. but after this hard reset this issues came up...
I also can not downgrade to 2.0 or 3.5
SCREWED!!!
EDIT: Just updated time and date and started working
Dont really know whether it this the main reason!!!!! STRANGE!!

tapash said:
I also used with same cooked rom last time, WORKED PERFECT!!! yes, I accepted all terms and conditions first and before login i exit iskoot and i am using UK 3 network. but after this hard reset this issues came up...
I also can not downgrade to 2.0 or 3.5
SCREWED!!!
EDIT: Just updated time and date and started working
Dont really know whether it this the main reason!!!!! STRANGE!!
Click to expand...
Click to collapse
LOL, that old chestnut... I didnt even consider the time and date!!
it seems ISKOOT implants the time/date into the registry on first run, and I think it pulls it from the server, so if your time/date didnt closely match the server's it would throw a paddy.
this was one of the issues I was up against when I created the CAB, if I set the "firstrun" entry to a date it would only work for a day or so then it wouldnt connect or send messages properly.
when setting a date in there it meant I could run the cab file without prior opening of ISKOOT (Thus getting rid of step 2) but I hit the above issues!
Maybe I should update my first post to:
1. check time and date are correct!
Well done on sorting it.

hi
ihave instaled iskoot and when i went on my programe i could not find the program any help pleaseeeeeeeee

iSkoot
iSkoot works fine for me,
Install iSkoot, launch once, no need to login, exit (make sure it's not running in the background) then use the regmod to apply Three UK settings
Files I used attached

Using PAYG UK 3 Sim w/ Kaiser and iSkoot
Thanks Danh2009 for your great cab, it was very useful and extremely easy to install!
After some initial head scratching, the advice posted on changing the first run date also did the trick to get me logged in without any 'unable to connect' errors.
The only issue I'm finding is when I attempt to skypeout to a UK number I get the notification 'Call Failure - You can only make calls to numbers abroad'. The test skype line and presumably non UK number are fine.
Has anyone else experienced this issue?
My thoughts are that it is perhaps related to the automatically assigned +447838... 'callnumber' as this is the only thing that might be variable between difference users who have also used this registery mod cab. Perhaps someone who is able to make skypeout uk calls could let me know their 'callnumber' (mine is +44783838333870) but other posts have suggested other numbers differing on the last digit.

Unfortunately all UK numbers are blocked by 3, they would be at a loss if everyone topped up their skype to make phonecalls and not their mobile!
there is no workaround that I know of.
If there was a workaround you wouldn't be calling the free 3 iskoot callnumber and therefore would get charged.
hope that helps!

Thanks for the clarification Danh2009! The documentation on the 3 website was ambiguous or absent and my brain had filled in the blanks with colourful brainfluff.
So I guess (not knocking it, still great!) this limits me to making up to 4000 mins of calls per month using iskoot to skype contacts only (skype to skype as advertised).
If I want to use skypeout or skype in then I download the 'official' skype WM program, which will then let me use these facilities, but this will use up any data allowance I have.

Help on explaining how to update the time and date, after installing iskoot, please??
damianiw said:
iSkoot works fine for me,
Install iSkoot, launch once, no need to login, exit (make sure it's not running in the background) then use the regmod to apply Three UK settings
Files I used attached
Click to expand...
Click to collapse
Hello there,
sorry i have installed the iskoot and the regmond .cab file as you've explained but i am also getting the unable to connect message...i've read the post that says that what is needed is to update the date and time...can anyone, please explain how to do it...step by step...thanks
regards,

.NET CF Installed?
jamapalu said:
Hello there,
sorry i have installed the iskoot and the regmond .cab file as you've explained but i am also getting the unable to connect message...i've read the post that says that what is needed is to update the date and time...can anyone, please explain how to do it...step by step...thanks
regards,
Click to expand...
Click to collapse
Is your phone set to the current date and time?
if it is you shouldnt have a problem, the only other thing i can think of is if you havent got .NET Compact Framework 2.0 or higher (i think 3.5 is the standard at the moment).
also:
to change the time go to start-> settings -> clocks and alarms and set the time and timezone there.
Hope that helps

now working!!!
Hey,
thanks for your reply.
The clock and date are set to the current time and location...but it still give me the error message...
I installed .net cf 3.5 but it still doesn't work...
then i tried the registry editor and found there the 'first time' field and erased it....tried again and ....voila!!! skype working...hope that continues to work...
thanks a lot for your help for your precious posts.
best regards,

spoke too soon...
jamapalu said:
Hey,
thanks for your reply.
The clock and date are set to the current time and location...but it still give me the error message...
I installed .net cf 3.5 but it still doesn't work...
then i tried the registry editor and found there the 'first time' field and erased it....tried again and ....voila!!! skype working...hope that continues to work...
thanks a lot for your help for your precious posts.
best regards,
Click to expand...
Click to collapse
made a skype call to a skype contact and it charged me 20p which is the network charge to call another network...any reason for that?
thanks,

jamapalu said:
made a skype call to a skype contact and it charged me 20p which is the network charge to call another network...any reason for that?
thanks,
Click to expand...
Click to collapse
The only reason I can think for it to charge you is if you had the Callurl wrong or even the callnumber wrong. But if they were wrong then Iskoot shouldnt work, either that or you have skype installed instead of Iskoot.
my settings are:
Callnumber +447838333880
Callurl http://mobile.three.co.uk/948 (as set by Regmod cab)
Check out post #9 by Damianiw, he has attached the latest Iskoot Cab, it may be worth while reinstalling Iskoot and re-installing my Cab.
Good luck

iskoot working!!!
Hey man...you're a star!
my skype is finally working with my diamond...thanks a million for the help Danh2009...i appreciate it a lot!
Cheers

Iskoot on TPC 28002 stock rom issue found?
Just a brief update which im wondering if anyone else is having this issue.
when using Iskoot on TPC's 28002 stocklike and Ultimate rom i think iv found an issue.
when typing a message it tries to predict the next word and starts adding uppercase characters randomly into the message!
a biT liKe thIS!
The issues do not exist when doing a text message or an email.
ive tried:
Changing .net versions via NetCfg (3.5, 2, and default)
reinstalling iskoot, & regmod
flashing radio, and rom (hence stocklike and ultimate comment above)
checked regional settings
anyone else think of anything?
EDIT: Seems to be an issue with TPC's ROM as he has confirmed there are issues with bad files.

Apologies if this is classed as a *Bump*
BUT:
New version is up, full installer.
Read the first post for more information.
-Dan

Help me fix Internet Sharing feature

Hi folks,
I need to know what the "correct" values for the Internet Sharing registry keys look like, so I can write an app that fixes them for those of us who don't have it working. To do this, I'm asking if people can do some simple steps for me:
1) Install Webserver Native Access v0.5.3 on a dev-unlocked phone, if you don't already have it. If possibly, please use the AllCapabilities version but even the normal-capability version helps.
2) Run the app and use a browser on your PC to navigate to Registry, HKEY_LOCAL_MACHINE, SYSTEM\CurrentControlSet\services\ICSSVC (URL should look something like http://192.168.0.15:9000/Registry?hive=80000002&path=SYSTEM\CurrentControlSet\services\ICSSVC).
3) Click "Download this key and subkeys as .REG" and save the resulting file.
4) Post that file (in a .ZIP or as a .TXT) here, along with the following info:
4a) What phone model you have (if using a modified ROM, which ROM as well).
4b) What carrier (mobile operator) you have, and whether your phone was built for that carrier.
4c) What OS version you are running (exact build won't hurt but shouldn't matter).
4d) Whether the "Internet Sharing" feature currently works for you, and if not, what error you get.
Thank you so much! I'll post an example below.
By the way, I'm particularly interested in the following classes of phone:
* Everybody who can run the AllCapabilities version of the webserver.
* Anything on T-Mobile US that has working ICS. Since it seems to work only for TMo-branded phones, better still if your phone isn't a TMo model.
* Anybody who has working Internet Sharing on a different carrier than their phone was built for.
* Anybody who has it work on their home carrier but not on any others.
* Anybody for whom it does not work and never has.
* Anybody who has an open-market phone and Internet Sharing works on multiple networks for them
(I will add to this list if other classes of problem crop up and need to be fixed in a different way).
I should mention that there's no guarantee that the fix will be available for all phones, at least not until we interop-unlock them. It should be possible for any phone with IU, though, at a minimum.
Thanks for your help! (Seriously, I'll push Thanks for anybody who sends useful data *at least* until I get it working.) This could benefit a lot of us here; in theory, it might even allow us to get Internet Sharing working without it using tethered data limit too.

Example from my phone
Phone model: Samsung ATIV S (SGH-T899M), stock (but capability-unlocked and somewhat hacked) ROM
Carrier: T-Mobile US, but the phone was built for Telus in Canada even though it had no SIM lock.
OS version: WP8.0 GDR3 plus the pre-8.1 update (Samsung firmware slightly tweaked to reserve registry and filesystem writing).
Feature status: Internet Sharing feature does not work for me on this carrier, and never has. Error is:
Connection Not Shared
There's no cellular data connection to share right now. Check your cellular settings and signal, and try again.
Click to expand...
Click to collapse
(As a side note, that error message is a dirty lie.)

I'm very confused about this one topic.. Because i always share my internet connection without data plan since 8.0 & it works fine. Never disconnect.
Firstly i would like to know as what peoples want as refers this one.
Sorry for no helping points.

Wow, "THANKS" @djamol. Would it have been too bloody hard to follow the steps so you would have actually contributed something to this thread? If your Internet Sharing works, even though you don't have a tethering plan (I *VERY* strongly doubt it works if you don't even have a data plan; that makes no sense at all) then your configuration data would have been very valuable.
There are quite a few people who are either completely unable to use the Internet Sharing feature or for whom it would cost extra (even though, in some cases, it is *supposed* to be included in their plan). The goal is to help these people.

Phone model: Samsung ATIV Odyssey (SCH-I930), interop unlocked(thank you sir!!!)
Carrier:Verizon US
OS version: Dev Preview 8.1 Update 1(8.10.14147.180)
Feature Status: Working (Seems on other devices/earlier OS's I got a warning message about data usage but not now). Haven't tried on other carriers; first time used.
A little side note: Still had Internet Sharing enabled when I started the webserver app and got a strange IP or MAC address which when clicked on threw an error. Couldn't find the address on any devices connected to my wireless or on the router itself. Included screenshots...

Aw hell, that's an IPv6 address again. I really ought to fix the app for handling those. Thanks for the reminder...
Also, big thanks for the file! I'd like some more from different versions, just to get a feel for what's version-specific vs. different for reasons of working-or-not, but that was already helpful.
EDIT: Did you use the AllCapabilities version of the app? It looks like the standard version can't read one of the relevant registry keys, and sadly it's the one that is most useful.

GoodDayToDie said:
4) Post that file (in a .ZIP or as a .TXT) here, along with the following info:
4a) What phone model you have (if using a modified ROM, which ROM as well).
4b) What carrier (mobile operator) you have, and whether your phone was built for that carrier.
4c) What OS version you are running (exact build won't hurt but shouldn't matter).
4d) Whether the "Internet Sharing" feature currently works for you, and if not, what error you get.
Thank you so much! I'll post an example below.
By the way, I'm particularly interested in the following classes of phone:
* Everybody who can run the AllCapabilities version of the webserver.
* Anything on T-Mobile US that has working ICS. Since it seems to work only for TMo-branded phones, better still if your phone isn't a TMo model.
* Anybody who has working Internet Sharing on a different carrier than their phone was built for.
* Anybody who has it work on their home carrier but not on any others.
* Anybody for whom it does not work and never has.
* Anybody who has an open-market phone and Internet Sharing works on multiple networks for them
(I will add to this list if other classes of problem crop up and need to be fixed in a different way).
Click to expand...
Click to collapse
Hi,
4) Attached.
4a) Nokia Lumia 920 RM-821 on UK CV ROM, but originally phone came with Orange Poland ROM
4b) I'm on Orange too, though not in Poland nor in UK.
4c) Running WP8.1 Update 1 on Lumia Black firmware.
4d) Internet Sharing feature worked smoothly for me from the beginning on any rom i flashed and any firmware, so yes, it's working without any problems.
Hope this helps.

@GoodDayToDie
Guess I can help!
4a) T-Mobile Branded HTC 8X running WP 8.1 Developer Preview
4b) T-Mobile US. It was built for the carrier
4c) OS version 8.10.12400.899; Firmware 3030.0.34101.531
4d) Internet Sharing works great! Sometimes when I am roaming, I get a message saying I don't have a plan that supports Internet Sharing and that I need to purchase one.
Hope that helps!

GoodDayToDie said:
EDIT: Did you use the AllCapabilities version of the app? It looks like the standard version can't read one of the relevant registry keys, and sadly it's the one that is most useful.
Click to expand...
Click to collapse
Sorry, can't sideload AllCapabilities version and of course the Bootstrap app succeeds but AllCapabilitiesUnlock fails on this OS. I am currently trying to find you any other info via FS Access and came across this if it's of any use ???

Oh right, I meant to release an updated version of EnableAllSideloading for 8.1. Whoops, I should do that. If you want to help out with that (not really the right thread but oh well, it's sort of relevant), dropping the exported .REG for HKLM\SOFTWARE\Microsoft\SecurityManager will help a lot. Note that it will include a list, by GUID, of all the apps you've installed (but nothing much else of a potentially-sensitive nature).
The files you provided are interesting. I can't say I know what the value in the first one mean, but they do imply a Verizon-specific difference in the feature. The second you actually might not want to share; it has the (default?) configuration of the Internet Sharing network in it, including key material. The third isn't actually data by itself; it instead defines the schema for the HotSpot configuration file. This info is potentially useful (though I wasn't able to get a Configuration Service Provider to parse my HotSpot provxml when I tried, probably because I didn't have the requisite access) although the info is also available publicly online.

4) Posted rar file here. Though I get no value, using the webserver and snicklers registry tools. Shows error2 in webserver. Registry Tools doesn't show any error just shows "no value".
4a) Using a Samsung Ativ-S SGH-T899M running Wolf's Fake Rom
4b) Using it on Simple Mobile, bought it sim unlocked I think it used to say Telus before the fake rom.
4c) OS Version 8.10.12359.845
4d) Internet Sharing works fine after Wolf's Fake Rom.

Whaaaa? That's weird. Error 2 means FILE_NOT_FOUND, or, more precisely here, means the registry key wasn't found. If you go up a level (CurrentControlSet\Services) is there not any ICSSVC key? Can you maybe post the .REG for that entire key?

Samsung ATIV S Neo (SPH-I800) Stock Rom - Interop-Unlocked/All Capabilities
Sprint for Sprint
Window Phone 8.1 Update through DP: 8.10.14147.180
Internet Sharing doesn't work for me.....that might be because I haven't paid Sprint for it.
Error:
Connection Not Shared
There's no cellular data connection to share right now. Check your cellular settings and signal, and try again.
Also attached, what I think, is the text of the S printEntitlement dll. This may be only be relevant for sprint....
Blue_Frog was working on something regarding ICS here: http://forum.xda-developers.com/showpost.php?p=54704074&postcount=577
-tdecision10

Any movement with this?
-tdecision10

Was reading wolfs MBN Creator thread the other day and somebody mentioned a backup of the CSC being stored at C:\Windows\System32\CSC
It has to be blocking the internet sharing when the original CSC is run during a hard reset. However wolfs CSC has internet sharing working fine. Tested by me. Im using an ativ s t899m WP8.1 running wolfs fake rom.
Using the webserver I pulled the files from my phone. Using sam-tools I extracted his CSC file, not directly off phone just from the mbn file from his fake rom thread.
Don't have time to look them over but here they are.

Looked over files in my previous post.
The stock CSC has 5 different configurations, all from different carriers. Most of the files contain nothing related to internet sharing except the SS_xxx_CSC.xml file. This one contains a lot of registry edits that aren't included in the wolf csc. Some for accent colors, tile layout, etc. but there is a few registry edits that regulate internet sharing in there. This same file in wolf's csc contains a bunch of capability unlocks but nothing even close to the stock versions with all the reg edits for all sorts of different stuff.
It mentions a dll file named EAPSIMHSPlugin.dll that I wasn't able to find on my phone. Not that I don't think its there I just wasn't able to get to the directory from the webserver. Here is the path c:\Programs\HotspotHost\MSFT\EAPSIMHSPlugin.dll
Here are the 3 edits made that I think block internet sharing. They are in
HKLM\Software\Microsoft\Windows Phone\HotspotOffload
I have that directory in my phone and it includes the subdirectory Plugins and Parameters but neither include any keys within them.
Can someone test this edit and see if its gonna be this easy to turn off the internet sharing block.
HKLM\Software\Microsoft\Windows Phone\HotspotOffload\Plugins\MSFT\PluginRank
Change the 1 to 0
Ill attach a txt file of the entries I copied and pasted from the Telus CSC files that would have anything to do with internet sharing for all the reg edits made incase anybody wants to look.

Oddly enough, my phone doesn't have that key at all. It has the Plugins key, but no subkeys of it (and no values like the ones in the provxml you attached). Of course, that could be due to previous experiments that I've tried (though they didn't work). Similarly, it has the Parameters key but not the subkeys listed in the attached file.

Huh, I really thought we had something there.
Another difference is in the config file. Ill attach just them. Not sure where to go with the differences though. Not familiar with it.