Any success case using Redfly with X1?
I tried 2 versions, both failed.
Redfly client comes with CD, installed correctly but generate error durinng initialization when connecting to Redfly.
Latest Redfly beta client, installation ok, but timeout when connecting with Redfly.
I have the redfly and using a custom rom for the Athena 7501. Are you having issues with both usb and bluetooth? (I've had issues with bluetooth before) The X1 is an upgrade option of mine so I am curious.
See here for latest beta drivers for the Redfly for the X1: http://www.celiocorp.com/install/beta/
EDIT: remember these drivers are BETA can could be unstable. In my case I had a hard reset and loss of data.
Related
Need help. Trying to set up blue tooth on cingular 8125. Just bought new kensington bt and it set up serial com as com 4 and 5. The phone only gives u the option of com 6 and com 7. Any ideas? The BT does connect to phone but activesync cant find phone. Tried activsync 4.1 and 4.2. Thanks in advance for help.
I'm having the same trouble. i scoured this and other forums but can't find any info on this problem. I think we may need to upgrade the rom on our phones. I'm still running the stock rom and i think if we upgrade that might correct the problem.
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.
ktwildchild said:
bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.
Click to expand...
Click to collapse
If you guys still have problems with this after let me know. I played with this for a few hours about a month ago and could retrace my steps. A couple of phone reboots after setting up the ports helped
Just to add, I noticed that once I upgraded the ROM to Summiter's 2.25 I was able to walk out of BT range and when I returned re-sync via ActiveSync without doing a soft-reset of the phone.
As SK7575 said, be sure to post there are plenty of folks using this connectivty option and it does work....
And I had this working - nicely syncing between my cingular 8125 and laptop via BT!!
But then I tried to get my 8125 to connect to my new wireless network - which did not work - and in the process of trying everything I must have broken something, because now after trying everything imaginable I just never see that activesync service on my 8125 any more.
The last I tried was to remove all the BT serial ports from device manager after deleting them from the HP bluetooth neighborhood (I have a bigger HP laptop with built in BT).
Then rebootet and four new BT ports were found and installed. Then I told the HP software to make a new incoming port (they call it service) and got COM 5. Then I told activesync on the PC to use COM5 for syncing.
Made sure all pairing was removed. booted both the HTC and PC - paired the two - bang - no 'activesync' service.
Now I am running out of options especially as I don't know how to un- and reinstall the HP software that comes with the laptop.
Any ideas?
Thanks
Gunter
I also have the HP BT stack on my laptop and ActiveStink does not sync with my MDA.
Any answers here, may help get me synced via BT.
Is the trick to see which USB port comes alive when I connect MDA via USB?
and use that on my PC for ActiveSync to listen to via BT on my laptop?
Thanks
--
NB
I'd be glad to hear if someone has the Belkin F8T012 USB dongle and that they have that working with bluetooth ActiveStink.
'Cause everything I've tried, I never ever see the "Activesync" profile appear on my device when pairing, I only see an available Serial Port.
Does anyone know the details of how that active sync profile is cretaed on the 'puter? If I could troubleshoot from that angle, I bet I'd have it working...
-Chuck
Anyone got this to work with the Kaiser? I have a T-Mobile UK Vario III with stock 6.0 ROM and I recently managed to get a gamepad on eBay however despite using several different versions of drivers including the latest (v1.52 from smartgamepad.com) I am unable to connect and get the error message "Connection Error, we don't support this Bluetooth Gamepad". I tried on my WM5 Vario instead and I get the same message although the desktop drivers work fine so the pad itself works. I can pair it with ok too but this achieves nothing, any got any drivers that do work on the Kaiser? Thanks, Paul.
Bump! Anyone?
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
which sync software do you use on OS X ... i'm using "the missing sync 4.0.3" ... everything works fine
I just want to pair them with bluetooth and use PAN to use my data connection.
Any idea?
Do you want to use the data connection of your Mac? I only was able to use the data connection of my diamond via Bleutooth-PAN. The other way around seems to have an issue.
I have posted this question also to the discussion forum at apple.
http://discussions.apple.com/message.jspa?messageID=7632465#7632465
About pairing both (Mac and Diamon) this works for me (MBPro OS X 10.5.4). Have you enabled the "visibility" of both devices during pairing?
Hi,
Its possible to use the Diamond as an internet modem with OSX.
I had tried to get this to work for the last couple of weeks.
It really depends on your bluetooth dongle. I had success with Cambridge Silicon based chipsets. I had a Belkin one and another generic one which didn't work.
You need to pair it from within OSX. You'll know its successful when it displays an option for joining bluetooth PAN after pairing. You'll have an option to "Join Network" under the paired device submenu in the OSX Bluetooth menu.
Once its done, all you need to do is start ICS on ur Diamond and select Bluetooth PAN, than Connect. After that, select "Join Network" on ur Mac and off you go!.
You can also connect the diamond to the USB port for power.
I tried USBModem which didnt work.
My laptop is an Acer 5570 hackintosh. Hope this helps.
rtao said:
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
Click to expand...
Click to collapse
Probably a stupid question but have you ticked the box on the Diamond that says "Make this device visible to other devices"?
It can be found under Communications - Settings menu - Bluetooth
and it's on the Mode tab.
I want to use my ICS via PAN, and I can't pair my Diamond with my MacBook Pro with bluetooth, they can't see each other no matter which side I initial the search and I am sure both of them have turned on the discoverable option....
I can pair my diamond with my iMac ONLY if I disable TF3D!
I use Eltima SyncMate (epert edition) to sync and it's working great.
Only if I leave TF3D on the driver on the diamond will crash.
Luckely it's quite simple to disable TF3D n a few clicks.
(Start>settings>home>unselect TF3D>[OK])
Eltima has updated their drivers.
It works now:
Syncing (folders, contacts, mail etc etc) while TF3D is running
There are a few solutions available in case you have not already solved the problem:
The free part of SyncMate works well for contacts and calendar and supports internet sharing
http://mac.softpedia.com/progDownload/SyncMate-Download-28111.html
I am running OS X on Dell 1525 with Bluetooth Internet sharing with HTC Diamond, and syncing contacts and calendar with SyncMate with USB Bluetooth as a matter of routine.
So i have installed Athine lite, PDACornerUltimate.V17, and HyperDragon IV. Athine lite and PDA v17 are both based on WM 6.5 and i can not get WM remote desktop to work it just hangs @ connecting with no error messages. Hyperdragon based on 6.1, RD works just fine.
Any1 have a solution to get this working on v6.5? i have installed Mocha Remote Client and Terminal Services 2002 and both of those work just fine on WM6.5, but i really want to be able to map my device to the machine.
im currently running Athine lite as its fast and clean.
would you mind explaining how you got it to work the first time? im a little confused about the domain and ip address and such
so what is no one having a problem with this?
same problem here, just sitting on connect...
And there's no traffic since HSDPA doesn't kick in (switching between H and 3G symbol).
I've been trying Anryl's latest ROM's. 21202 rev 8 or 9 had RDP as part of the ROM at that connected ok.
I've just upgraded to his 21500 rev 5 and RDP is not embedded so installed from the .cab I used with WM6.1 and I get the hang at 'connecting' problem.
Don't really want to downgrade but may have to...
Same here. It worked with 6.1 but I install the same cab on 6.5 (Tai BlueCalm ROM) and it just hangs when trying to connect. I can't figure it out.
I found this link in XDA Developers and it works now for WM6.5.
http://forum.xda-developers.com/showthread.php?p=3592033
Was anyone able to establish a connection with this version of rdp 6.5? I only get connection errors when I try to connect to my Vista SP 2 System (works from any Windows XP and Vista device, so its no issue with my pc).
TyTN II & WinXPpro Remote Desktop connection without router or internet
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
sarang.hanwante said:
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
Click to expand...
Click to collapse
Yes you can with an ad-hoc connection. You'll have to google it though, as no one can tell you the exact details for your network as you will have to use an internal IP address. Start by googling how to use the "ipconfig" command in dos, as that's a good way to find out internal addresses quickly.
Start here:
http://www.microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Thanx for Reply Stuntdouble, but need more info
Thanx for reply stuntdouble but i need some more info regarding the same.
1. Link u have forwarded - I have already did before made a adhoc connection on my laptop and connected it from my winmo.
2. winmo cannot connect thru wireless though when connected thru USB get working fine.
3. I cannot even see a different machine other than my own PC in network neighbourhood.
4. I have installed Network access from HTC but it also dont show any computer in LAN conected while connected on adhoc.
please reply if this could be sorted.
thanx in advance.
Sounds like there's a firewall blocking the connection on your pc.
Hi guys, I have been trying to get my XDA to go online THROUGH my desktop computer via bluetooth. PAN.
Sadly, I am having ZERO luck!
On the desktop side, I was using the Toshibia bluetooth stack, I have also tested using the default Microsoft bluetooth stack.
On the XDA side, I tried and failed using WM 6.1 and the default stack, I then upgraded to 6.5 (Which is pretty sweet) and could not get the default stack to work via PAN either. I also installed Widcomm Bluetooth stack which provides much more output than the MS one.
After using the Widcomm drivers, I am getting the impression that my desktop is not offering the PAN service, but I am a little bit confused as to why.
If someone, could provide me with some current and up to date pointers (Please do not link me to random wiki pages made in 2005 - Its all changed!) I would be thankful!
Well I'm just trying the same with an old Wizard and it seems the possibility to share internet FROM Desktop TO Windows mobile has been removed... since WM6.
==> The option "Join a network" is missing from WM6... wich is weird since the bluetooth pan driver can still be configurer under "Parameters/System/Connections/WIFI/Network Card"
If Anyone knows how to figure this out : I've read more than 30 posts of people looking to share internet this way around with no success...
whereas you've got out of date pages explaining how to do it under windows mobile 2003 !
Need drivers
on my pc setting up a new connections gets stuck when i choose the device. there it shows my device but wn i select connect>access point i get some error tat the device is allready connected to another device but im sure its not.
on the phone when i set up a new modem settings
after select device, it comes to the partnership settings where only option is active sync. i think with some driver we may be able to get a internet setting here.