I'm having a problems with it so if anyone has some info on the matter I'd greatly appreciate...
I bought it to for use with my "headset" consisting of in ear headphone(s) and an external microphone (Olympus ME52W) both with 3.5mm jacks. The audio cable has "mic in lines" on 3.5 and 2.5mm jacks. Can I use some of those "2 in 1" adapters to get both of my periferals to one 3.5mm jack? Will the mic work? It's the 2.2 KOhm with plug in power system 1.5-10V if that's of importance. Does the cable give it enough power?
Since my electronics knowledge is almost zero can someone explain the mic and phones part?
Maybe I should explain what I want to achieve with my weird setup. The idea is to use it with some program which modifies my voice...don't ask me why...the mic should be as discrete as possible and the in ear bud is also in that way. That's why I avoid to use "normal" headphone+mic headset which would BTW work with YC A300, yes?
And one last thing, if some soldering will be necessary to get it to work, is there a schematics of extUSB on Diamond so I can get it to someone to put together the mic and earphones on 3.5mm jack? And hope to work.
What sort of microphone is the one which comes with official wired headset?
So many questions on my mind.
Sorry for the long one, but I really need this, and my searches on the subject were not very successful.
Related
PPC Techs XDA/SX56 2.5mm/3.5mm Audio Headset Adaptor
This adaptor converts the proprietary 4 conductor Pocket PC phone jack found on the XDA to a STD 2.5mm headset jack and 3.5mm stereo headphone Jack, and includes a PPCPE compatible answer/mute button. The adaptor cable is approximately 5" long.
Click to expand...
Click to collapse
http://www.expansys.com/product.asp?code=PPCPADPT01
What are your thoughts. Seems like a good product. Be able to use some decent headphones for listening to those mp3z . . .
Anybody used one of these?
is the answer/mute button only for those 2 functions or is that module also acting as a microphone (don't think so)? looks good to me but i use the headset adaptor i bought from this internet site based in hong kong. check out:
http://pc-mobile.net/pxdaa.jpg (the website is http://pc-mobile.net)
it comes with a standard 2.5 mm jack for the xda. the wire is on a retractable mechanism to avoid tangling. at the other end is the stereo phone jack which serves as an answer/end button and as a microphone as well. there's a single headphone jack connected which uses a 3.5mm plug. when you want to listen to the toons using your 2-headphone set; you simply unplug the jack and insert any 3.5mm plug-based headset. in effect you can use any 3.5 headset as handsfree.
costs 26usd but services are 5-stars for me.
cheers
Anyone tried this adaptor from pc-moblie.net? The sound quality is good or bad?
i doubt that it could damage the quality so you can hear it unless you connect it to a stereo's lineIn and play it out using real speakers
those headsets are too limited imho to take much damage from a few connectors
However, all these things are not suitable for xdaII.
I bought one from pc-mobile and the quality is good. However, since the new xdaII got 2 buttons in its handsfree design, this product from pc-mobile is not fully compatible. You can hear from it but you can't pick up or end call from it as compared to xda1 you can.
I hope they can produce another product which is fully compatible with xda2. Otherwise, I may have to go for bluetooth but really worry about the battery.
Also, can I or is there anyone using the bluetooth handsfree for mp3 playing????? I doubt that very much.
I do really like the pc-mobile handsfree which is retractable and handy.
Any alternative in the market?? You got the adaptor but I think its only good for audio MP3 listening. If you attach another headsfree to the adaptor for business use (don't know whether we can...), you will have 2 buttons (one for the adaptor and one for the handsfree) which is quite funny !
Does somebody else have this problem and find a solution?
Do most people use bluetooth?
*Damn* !
Been creating a cable myself, tried it yesterdaynight late....
The damn thing didn't answer the phone when i pressed te button.
I cut the audio-out cord and trew the cable away, because i tought the mic didn't work....
Now i read this.... Guess the mic did work, but the answerbutton didn't.
Now i hope i can rewire the audio-out cabels again, so i haven't been soldering for nothing last night
Headphone adapter for HTC magic
Hello.
On the HTC magic, there isnt a 2.5 or a 3.5 headphone jack! there is only a mini USB jack. Does anyone know where i could get a mini USB jack adapter to turn it into a regular headphone jack?
Even if anybody knows what kind of mini USB jack comes on the HTC then that would be lots of help! because ive already purchased one that fit, but didnt work so it must have been a different type.
Thanks in advance!
http://www.google.dk/search?hl=da&q=extusb+to+minijack&btnG=Søg&meta=&aq=f&oq=
I already have a 2.5mm -> 3.5mm stereo adapter to connect my Mogul to my car stereo.
I want a 2.5mm (M) -> Splits two ways:
a) 3.5mm (F) stereo
b) 3.5mm (F) mic
If there isn't one commercially available, I should be able to make it. Any idea what the proper pinout is? And how do we get all signals down 3 wires? (Left+Right+Mic+Gnd+control button)
Any update on finding out how to conect a external speaker and mic to the 6800? I would like to have this type of setup in my car.
TdiDave said:
Any update on finding out how to conect a external speaker and mic to the 6800? I would like to have this type of setup in my car.
Click to expand...
Click to collapse
You can do a direct splice of the cables coming out if you want, but that requires a little bit on knowledge and a little bit of testing. Basically, you'd take the stock headset and cut off the earbuds and mic. You'd then splice the headphone fead and the mic feed into other lines that would run to your external speaker and mic. Other than that, I don't know of any attachments that do it. You could swing by radio shack and ask them.
I am also interested in doing this. My car has an aux input to the stereo and I would like to install some kind of mic setup so I can use it as a handsfree device. Bluetooth is way too unpredictable so I plan on doing it wired.
You will need a 4-conductor 2.5mm plug along with the Y-cable that came with the phone that has usb and 2.5mm jack.
anyone looking for this setup.. i have a cable i bought off ebay that has a miniusb,which allows you to have a charger plugged in, built in microphone and answer button, and a 3.5mm headphone jack, it works great in the car for hands free (car deck has aux in) , and also works great with my cigarette lighter fm transmitter. anyone looking for this , just type in m
I think i found a solution. I just bought an adapter like this one:
http://cgi.ebay.com/2in1-USB-audio-...ryZ35211QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Hello everybody,
I own the bose on-ear, and I love them.
http://www.bose.co.uk/GB/en/home-an...bose-audio-headphones/bose-on-ear-headphones/
I would like to use them with my htc hd2 while calling.
Since the audio cable from the device to the headphones is removable, is it possible to have a 3.5mm female/male cable with a mic and audio controls in it?
I mean something like this:
http://www.amazon.co.uk/StarTech-co...1_1?ie=UTF8&s=computers&qid=1288395589&sr=8-1
with mic and controls attached
thx
http://cgi.ebay.co.uk/1-6m-Earphone...uting_CablesConnectors_RL&hash=item5d2b73c739
I've just found this.. but it's really ugly..
anyone?
EDIT:
found also on bose.co.uk.. but £40 for a cable! pure madness!!
http://www.bose.co.uk/GB/en/home-an...-on-ear-headphones-mobile-communications-kit/
Anyone??????
please I really need it!!!
Quote from here
forum.xda-developers.com/showthread.php?t=613732
quote
I've done a slightly different take on this, I snipped the lead between the control module and the headphones and soldered a inline 3.5mm jack socket. This enables me to plug my Sennheiser HD-25 headphones in without having to damage the lead and in fact plug any standard set of headphones in whilst keeping the full functionality of the remote module...
unquote [/code]
Is there anyone else here who uses a BOSE in-ear headphones?
I've got one and I read a few reviews AFTER I bought it that it's not loud enough. I'm not sure if this is something to do with the phone or the product is just like this.
I've had Klipsch Speakers for my PC before but unsure if their earphones are also very good compared to BOSE.
So, hello people, I recently got my X1, used, and I already LOVE this phone, definitely the best I've used so far...So I'm searching around for software to make it more useful, etc.
I found this: 4pockets.com/product_info.php?p=81
If you open the PDF Manual, it says it will need a multi-function 3.5mm jack
"Many popular makes of Pocket PC's have a multi-function 3.5mm headset jack
which has both microphone and headphones in a single socket."
This is what i need, does my X1 have it? If no, is there any possible way to get/make one? (For example, using the USB port to get a line input?)
Thanks in advance!
"Many popular makes of Pocket PC's have a multi-function 3.5mm headset jack which has both microphone and headphones in a single socket."
Click to expand...
Click to collapse
By that definition, yes, the Xperia X1 has a multifunction jack. It is a 3.5mm jack with a ground, left and right headphone, and microphone pins. The stock microphone also has a button that allows you to pick up and end calls.
Thanks alot for the answer! I almost gave up looking at the thread every now again...
Now, let's try this app
Hi there. I hope someone will help me...Basically I need dictaphone for interviews so I bought "Olympus ME-52W Noise Canceling Microphone" and I tryied to use it with my htc hd 2. Phone is showing connected headphones but mic is not working. So my question is can I use external mic with my phone or is it related with software? If someone know the answere pls help me!!!!!!! btw I use Resco audio recorder
The problem is because the connector on the mic is probably the same as a mono headphone plug. The phone thinks that you have headphones plugged in. The phone has a socket that accepts 4 pole jack plugs. That is it requires a special plug that has contacts for both left and right audio as well as for the mic.
If you really want to use the mic I would go to somewhere like radio shack or mapplins and buy a 3.5 mm 4 pole jack plug and a couple of sockets. You could then wire up your own adapter to let you use the mic and also a pair of headphones or speakers at the same time. The pin out for the plug should be easy to find on the net and so long as you can solder I wouldn't see any problems.
Other than that plugging the mic directly into the phone will defiantly not work.
shut up stupid douche