Related
Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again
Hey everybody! This is my first post on the xda-developers forums and I thought I'd make it a useful one. I attached the first WinMo6 application I made for my Tilt. It's a program which locks your keypad with the standard PIN prompt and quits. It's use? Lock your phone and set it to standby with two keys and no stylus.
Reason I wrote it? The second day I got the Tilt I found that the concept of being unable to lock the phone without the stylus confused and infuriated me.
Here's how you use it:
1. Download the .Zip file to your computer.
2. Extract the contents and copy the contained .Exe to your phone
3. Use jgermuga's PTT remap instructions found here:
http://forum.xda-developers.com/showpost.php?p=1577293&postcount=12
4. For the \HKLM\Software\Microsoft\Shell\Keys\40C7 key set the (Default) value to "\Path\To\KeyLock.exe" (Obviously replace \Path\To\ with the appropriate path, mine was "\Temp\")
5. Also add a string called ResetCmd with the same value.
I used "MobileRegistryEditor" to edit the registry on my Tilt. Also included in the .Zip is the source code in case you want to compile from source, audit the code, or just don't trust me. Compile it yourself if you wish.
With the above steps you can have a simple method to lock and standby your phone: Hold down the PTT talk button for just about 1 second then quickly tap your power button. As soon as the application begins launching your phone is already being locked so you do not have to wait for it to display anything other than the spinning "please wait" wheel. Power it off right away.
This has made my life significantly easier, and I hope it helps yours!
Enjoy
-Anthony
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
or you can download devicelock1.2, and map it to one of your hardware buttons. pretty much uses the built in device lock, but it makes it available so you can map it to a button, thus no need to use stylus to lock.
no need to unzip, just drag the file into your phone and install.
NguyenHuu said:
or you can download devicelock1.2, and map it to one of your hardware buttons.
Click to expand...
Click to collapse
Where would I get this?
^ i updated my post, its attached now.
Ty, I ended up searching the forums for it and found it. I'll give it shot and post back in a few.
Thanks Device Lock 1.2 Works Like a Champ. TYVM for your help sir.
Hmm whats the deal with the beeping noise right before it initates the locking?
(I take it back, I like the beeping noise..)
Whats the deal with if you have it on EASY unlock. and Black Screen
When you hold down PPT to have it lock... then after it the screen goes black you press ppt again... Your easy lock is than disabled?
(I should probably post this in the Device Lock 1.2 orignal thread http://forum.xda-developers.com/showthread.php?t=305402&highlight=device+lock)
I'm honestly unsure why it would not lock your device although I did set up a numeric PIN for my device which it prompts me to enter. Try running the .exe from the Program Files directory if you're still interested. If it doesn't lock your phone then I'm unsure why.
DuMnUt101 said:
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
Click to expand...
Click to collapse
Yea I had tried that too. But the Device Lock 1.2 seemed to have solved my problem. Thanks though.
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
cincy1020 said:
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
Click to expand...
Click to collapse
when you use device lock, it will lock your phone and dim it, not turn off the screen. so you do not need to press the power button to wake it up before unlocking.
there are options in the settings that will let you turn off the screen when you lock, but i dont think that is what you want. leave that setting unchecked.
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
well hi, im new here, i got an xda diamond touch, and my problem is that touchflow 3d doesnt start, i get always the windows mobile GUI, how can i start touchflo 3d ?
Sorry to ask the obvious, but you have enabled TF3D, haven´t you?
Start>Settings>Today>Plug-Ins>check TF3D is ticked (rough translation from German ROM).....
thanks for the quick respond, well when i enter today settings there is no touchflow 3d in the plugins only the windows stuff
Now that´s strange.....what ROM are you using? Standard HTC or some provider branded ROM? Thsoe ROMs usually contain the TF3D files - they are installed when you first boot up the device. It´s possible to supress that installation by doing a soft reset quickly after the initial display calibration screen....maybe that´s what happened?
If you haven´t done too much tweaking/installing you might try the old hard reset (you´ll loose all your settings/programs etc., that you have already installed). If you don´t want to do that, maybe someone else has got a better idea how to revive your TF3D.....
ok i have done a softreset yet, but didnt helped, now will try with a hardreset hmmm
Zida2k said:
yeah i have a O2 branded rom, how can i do a softreset ?
Click to expand...
Click to collapse
Have you had a look at the manual yet???
Soft reset: either press the red button in the stylus hole with the stylus, or long press the power key to shut down the device and then restart it - same effect.
Hard reset (reset back to how it was when you received the device): Push and hold "Volume Down" Key + "Enter" Key, push the reset button in the stylus hole while keeping the above buttons pressed, release the reset button and answer the onscreen questions.
When the device boots up after the hard reset you should be taken to the display calibration screen. After that the device will show you a quick countdown before installing additional apps (TF3D, phone skin, Opera, etc., depending on the ROM you are using). When installation is finished (do NOT interrupt it!), the Diamond will automatically soft reset. After that you really should have your TF3D installed and working.....
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Zida2k said:
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Click to expand...
Click to collapse
The "format" option also formats your internal storage (your device´s hard disk, so to speak), so it´s really up to you......by formatting the internal storage you will of course loose all your files on that media (movies, pictures, whatever you´ve already put there) and have to copy it over again.....
wow seems its working, thank u so much michi really THANK U
You are welcome! Glad, I could help!
lost a Touchflo theme
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Pesey said:
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Click to expand...
Click to collapse
Click Start/Settings then select the Personal Tab and click Today. Click the Items Tab at the bottom then click on the box to check Touchflo3D then click OK. You may have to scroll down a bit in the items list to find touchflo3d but it should be there.
So this is a question.
I don't use them, I don't want them, I don't need them.
How to remove them totally so that I have again control on the button and that I can assign something else to it?
I would like to do this w/o flashing another rom or recooking of some existing one.
So far I was able to do small workaround so that button for them only shows small error message, but doesn't show them.
Tnx for help
You can assign the button to any other .exe, use seach its found here. Best way to get rid of panels s to flash a lite rom.
Loco5150 said:
You can assign the button to any other .exe, use seach its found here. Best way to get rid of panels s to flash a lite rom.
Click to expand...
Click to collapse
tnx for input, I have removed key totaly and it doesn't show error message any more, but I still can't assign that button to something else via AEButton
kulla said:
tnx for input, I have removed key totaly and it doesn't show error message any more, but I still can't assign that button to something else via AEButton
Click to expand...
Click to collapse
You can, just create a new button on AEButton Plus, also remember to turn off the SE Illumination notification on the button.
XavierGr said:
You can, just create a new button on AEButton Plus, also remember to turn off the SE Illumination notification on the button.
Click to expand...
Click to collapse
When I press add button in AEB it doesn't detect it, HEX value for it is 0000, other buttons work.
On previous itje versions of rom w/o pannels I could map that key to something else w/o problems, but not on the latest ones with pannels.
http://forum.xda-developers.com/showpost.php?p=3119245&postcount=27
http://forum.xda-developers.com/showpost.php?p=3119577&postcount=28
Thread: http://forum.xda-developers.com/showpost.php?p=3119577
Worked for me.
xperian said:
http://forum.xda-developers.com/showpost.php?p=3119245&postcount=27
http://forum.xda-developers.com/showpost.php?p=3119577&postcount=28
Thread: http://forum.xda-developers.com/showpost.php?p=3119577
Worked for me.
Click to expand...
Click to collapse
Tnx, this was exactly what I was looking for, but AEB still cannot find and recognize key.
I have absolutely no idea what you could do else.
Be sure to:
- Delete the whole registry key HKLM\Software\SonyEricsson\PanelManager
- Delete *both* Startup shortcuts "panelmanager.lnk" and "Paneldefault.exe"
- Soft-reset
- Assign button in AEBPlus (I use version 2.6.5)
- Soft-reset
[edit] I use stock ROM version R2, so maybe thats the problem.
xperian said:
I have absolutely no idea what you could do else.
Be sure to:
- Delete the whole registry key HKLM\Software\SonyEricsson\PanelManager
- Delete *both* Startup shortcuts "panelmanager.lnk" and "Paneldefault.exe"
- Soft-reset
- Assign button in AEBPlus (I use version 2.6.5)
- Soft-reset
[edit] I use stock ROM version R2, so maybe thats the problem.
Click to expand...
Click to collapse
tnx for help anyway
I'm using non stock rom, so that must be it
I am using 2.6 and the Key Code is: 00EA