Hi,
I have the SPV M1000 (Himalaya), and phone used to work, then died. Texting worked, but phone didn't. So i used the Orange supported software, but it downgraded it to Win Mobile 2003. Although the phone did work, i prefer WM6 for the rotate screen feature etc.
Anyway, i downloaded a few WM6 roms, but of the 3 i tried, none of them allowed me to use the phone bit of the M1000.
Which WM6 rom should i download to get the phone working okay with my Himalaya ?
I tried C_ShekharAKU7.0c.R40.P24_public, also himalaya_6_1_0_0 file, but i cannot get the phone to work.
Regards,
Andy
I would suggest that either something is wrong with the phone section, or someone has made a mistake when upgrading the radio section of the phone.
The radio upgrade is a seperate upgrade to the ROM. All Windows Mobile roms should have phone support automatically, it is just a matter of getting the right radio working for you.
I am at work and as such I can not provide you any more detail, needlesss to say, use the search function in the top right hand corner of this website, and search in the Himalaya section for radio upgrade.
Cheers
Cheers Jadel, will give that a go now !
Best Regards,
Andy
Hello,
I'm now getting a strange error ! - i downloaded "C_ShekharWM6.1.1cR16.P32_public", but when i try to install i get a "country code" error ! - "ERROR 120: COUNTRY ID ERROR N-4-1-N-N".
What does this mean ?
Regards,
Andy
Use HimalayaUpgrade_NoID instead...........!
If you go to the Himalaya Upgrading section, you would have noticed this is the third link from the top "Fix and prevent ROM Upgrading/Downgrading Country ID Errors"
Here is the link, read it all and don't skip ahead, Rom upgrades can brick a device if not done properly.
http://forum.xda-developers.com/showthread.php?t=228852
Many thanks, i'll try that !
Regards,
Andy
Just tried the "himalaya 6_1_0_0" upgrade. Installed okay. But when on main desktop screen i'm getting errors, couldn't open these files : "Screenrotate.exe", "btdwake.exe" and "Phoneservice.exe".
Other than that it works !
Help please.
Regards,
Andrew
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!
Hi to everyone.
I've just bought a HTC Diamond on the vodafone network, but need to unlock it as I'm on O2's network.
I've been able to install SPL 1.4 and this shows on the boot loader page.
The problem seems to come when I try and install the 'new' rom. It goes through the whole stage up to 100%. Then on the device it says error code please try again. On my Pc it says error code 226. I've tried it on a windows vista pc, and again on XP. I've also tried it by installing it direct onto the internal storage. This again goes through the installation up to and including 1005, but then come sup with a new screen on the device saying that the update and the radio have both failed to install.
I'd really like to unlock my device and to have a new rom so that I dont have all the vodafone branding.
Like many others, I'm willing to contribute so that research and new software is developed, and I have also read the forums for many hours trying to find a solution to my problem before posting.
Hopefully I can be directed to some help.
Kind regards.
Just to update and incase anyones interested.
I ended up downloading the latest version of the official rom that I could find, then extracted the nbh file using winrar, and installed that from the internal storage which has successfully worked.
Not sure why the other rom image I had wouldn't work, just glad I've got rid of the vodafone bits really.
Regards.
I need to upgrade my i-mate but the RUU gives me the Error 120: Country Code Error...
Anybody can solve this?
-Thanks!
put your device in bootloader mode before connecting, and use maupgradeut_noid. that question has been asked and answered hundreds of times, please search the forum next time you come along a problem
In order not to multiply the topics:
I have succesfully upgraded my Tmobile MDAIII to Win 6.1 via the mentioned above method. And now I want the start-button-in-the-bottom
So I downloaded the image file, put MDA into a bootloader, plugged it into craddle, started maupgradeut_noid and... the second screen didn't show any data about the device. (in FAQ "something went wrong, start over again" is advised). Several attempts were of no use. The fresh XP SP3 also didn't help. What is wrong??
By the way, the official upgrading software (that one that shows Invalid country ID later) does show the device info screen correctly.
Hey guys,
New to this whole world of flashing devices and have been browsing for days trying to learn and understand all the different terms associated, so please forgive me if i say something that doesn't make any sense
Trying to upgrade my HTC Touch HD (Blackstone), Rom version: 1.14 WWE (put my phone into bootloader and the SPL is 1.14), was trying to update my phone which is when i came across cooking roms and updating them via flashing, have read Digital Outcast's Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL], decided i wanted to follow the HSPL which is when i came across
http://forum.xda-developers.com/showthread.php?t=671277
and wanted to install the 'blackSTONEhenge HyPer MaxSense' Rom, said i needed RADIO ROM version 1.14 or above, my stock standard HTC has RADIO Version 1.09, which meant i had to try and flash my devices radio rom.
What im not sure is this HSPL, i dont fully understand if im supposed to try and get/put HSPL on my phone before i do any flashing/ im not sure if HSPL is the 'thing' that allows flashing to become capable...
If someone could help me out as i have been browsing the forums for a few days and its driving me nuts as usually i would have worked it out by now!
Cheers,
Scott
Go to this link
http://forum.xda-developers.com/showthread.php?t=505377
dont get confused
1.just download "HSPLWrapper_Blackstone_156OliNex.zip" from "Attached files".
and unzip in a empty folder.
2.connect your phoneto pc via active sync.
3.run HSPLWrapper_Blackstone_156OliNex.exe, click yes/next/ok(sorry dont remember what was it, you phone will restart in bootloader (three color screen and hspl will be done automatically.
thats it.
now flash any radio or rom of ur choice.
nice explanation, just let me add some newbie information:
basically, what you are facing, is flashing three things:
1. you flash hspl, which means that your device will be unlocked for roms of all carriers and all countries, and you will be permanently ready to switch roms any time you want, as it remains in your phone, whatever you do (hard reset, flashing a stock rom, whatever).
2. the radio rom, the radio is the bridge between the windows mobile operating system and the hardware. this is responsible for the fact, that for example switching on wi-fi is done with the same button on any device, independent from which wi-fi card is actually installed. it controls wi-fi, gsm, 3.5G communications, bluetooth, camera and sound input and output. the latest radio for the blackstone is 1.17 (.25.09 i believe). it offers the best quality in all beforementioned services, but drains slightly more power than previous versions, due to higher performance.
as there is actually yet another stepping stone between the OS and the radio, rilphone.dll, it is advised to use a new radio with the cooked roms offered here. most chefs integrate a new rilphone.dll in their roms and they work best with the corresponding radio rom.
3. in the end, you will flash the actual OS rom that changes your operating system, possibly the language, the manila version and everything else. just like formatting your windows xp pc and installing windows 7, your apps, settings and personal information (in this case contacts, appointments, sms...) will be gone.
for it to work, you must flash hspl first, or your device will be unable to accept actual roms, and then proceed with the radio, and before flashing the actual OS rom (in your case blackstonehenge), you should perform a task 29, either you can flash it (see task 29 thread), or use mtty or use advanced ruu, which has an extra option to do it.
this was just a basic introduction to make it easier for you, to understand, what you are actually doing, when attempting to flash, the rest and all the steps to take are in the tutorials, i just find it easier to do, when you actually know, why you do certain steps, helps you remember for the next time.
regards
Chef_Tony
Ok thanks guys for the responses, and especially chef_tony's, cheers.
P.s. Sorry for the complicated response below, its hell to read
I have tried to follow:
Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
And it hasn't worked, when I follow the HSPL steps I get to step (HSPL2c) and it just sits on 0% and give an Error [262] code (this is the section where we try to flash Blackstone_156OliNex to the device.
The tutorial says: run HSPLWrapper_Blackstone_156OliNex.exe, which then tells us to establish an activesync connection, which i think means we have to get the bootloader mode to USB, in order to get the bootloader to USB Mode I have to connect my phone to the pc before running the HSPLWrapper_Blackstone_156OliNex.exe and leaving it connected to the pc to A) establish the activesync connection(Windows device centre doesn't register the phone as connected whilst in bootloader) then B) get the bootloader mode the USB.
So what i have done:
So the phone is connected to the pc, activesync registers the phone(leaving the phone connected i then),
place it into bootloader (shows USB Mode)
Then run HSPLWrapper_Blackstone_156OliNex.exe (i run it as an administrator)
the program tells me to establish an activesync connection (Windows device centre doesn't register the phone while its in bootloader, which dummies guide tells us to do), i dont know how to establish an activesync connection whilst the phone is in bootloader, so anyway i hit next, next and just click update the rom, and it just sits at 0% and give an Error [262]
Im not sure if the reason for this error is because i haven't put HSPL on the device, im still not 100% sure about the whole HSPL, i think all i have to do for this is run the HSPLWrapper_Blackstone_156OliNex.exe ?? then is the HSPL issue sorted?
Thanks again guys,
Scott
Dis-regard this post
easy thing. i had the same issue when attempting to install hspl for the first time. as described in the tutorial post you mentioned, i went to the part troubleshooting:
Troubleshooting - manual SSPL
- Boot up your phone.
- Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
- Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
- When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
- Go to step HSPL3 if successful.
with this extra step it worked for me, because installing sspl directly on your phone, it prevents 262 connection errors and unlocks the device temporarily which makes it easier to install hspl.
Thanks again chef,
ok i connected my phone, then copied the SSPL-Manual-TouchHD.exe to my device, run it and it loads into bootloader, shows spl 1.07OilNex, doesn't show USB no matter how long i wait, i unplug it and don't get serial mode either
Tried re connecting it and still no USB or serial mode comes up :\
I had tried following the troubleshooting tutorial before i posted on here for help
Should i try running the HSPLWrapper_blackstone_156OilNex.exe without USB mode showing?
and really appreciate all the help,
Scott
Following with interest
Tony and Scot enjoying the posts and hoping to pick up a few pearls of wisdom before upgrading. I have played around with my Touch HD and had it dual booting with android from SD card. For some reason I can no longer use my camera in wm 6.1.
I can not find camera.exe cab and was considering upgrading to wm 6.5 to see if that solves the problem.
Billy, im just stabbing at the dark here, but im guessing if you do flash your device to wm 6.5, during the installation of the upgrade, you're .exe for the camera will be re installed and should work again. Gdluck
Upgrading to wm 6.5
Probably right Scotty, I just want to make sure I don't brick the phone for the sake of getting my camera to work again. Have you managed to complete the upgrade?
Haven't yet, just waiting for some words of wisdom from tony
I also had Error [262] when tried to apply HSPL last week.
But, I applied USPL path to install HSPL!
So I entered USPL and started HSPL install.
Then process finished without any problems.
And it's working excellent... now on the 3rd ROM since appliing HSPL...
good idea, the most important thing is to get a stable connection for the bootloader, and if uspl makes it easier to install hspl, i would definitely give it a try. as posted before, depending on your soft branding, first installing hspl can be a hassle, however, once it's done, you never have to deal with it again (which is also, why many long term blackstone users including myself hardly remember, how to go about changing the spl).
also, since you mentioned that in sspl, you didn't see serial or usb in bootloader mode, make sure that your connection is actually stable. in bootloader mode, windows needs another driver for the device from what is used to sync the device (when it is switched on). especially, when using windows vista or windows 7, you should have a look at the thread "[tut] dummies guide: updating htc sync drivers".
especially on windows 7 x64 it can be quite a lot of work to get it running, because these drivers are not digitally signed, so you'd have to sign them yourself, which requires permanent test mode and comes with a watermark on your desktop, which, in turns, can be removed again. in that case, i would advise you to try a windows xp pc first to get your device up and running and you can deal with this later.
so, in short form:
1. in case you use windows vista or 7 and haven't dealt with the driver yet, have a look at the link to the tutorial or use a windows xp pc with activesync installed.
2. if you are positive that drivers cannot be the issue, or you successfully updated them, step forward and try the "uspl to install hspl" method, bodisson suggested.
CRACKED IT! dont have time to type how but ill post what happened once i wake up, thanks for all the help guys, you guys are legends!
Many thanks to Chef_Tony for his help in this matter. You've a lot of mod like qualities mate
Scottygrot, I'm glad you got it sorted in the end.
I'm closing this thread now. In future please post all flashing issues in Dummies Guide thread
Ta
Rick