Related
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
If you are looking for a sleeker look check out www.proporta.com, they have a design in development , hence the special offer, but you will have to wait a while for the alu case about a month or so, but hey who's complaing when you get freeby!
roko said:
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
Click to expand...
Click to collapse
just got one! its really cool and sleek design... :lol:
I ordered the Proporta about 6 or 7 weeks ago. I received nothing since then (apart from the useless neoprene wallet). Looks like it's going to be a long time before it is finnished. I think the Inno looks far better too. I'm thinking about ordering one instead of the Proporta.
Damoncarl, could you please tell if the beltclip could be removed without to much damage?
Does the case have enough room for the extended battery?? 8) thinking of getting one if the proporta case doesn't have room, by the end of the design reveiws... and it looks like you have to keep removing from the case just to charge or use it.
It looks that neither have room for the XDA+battery.
Both the Inno and the Proporta have their pro's and con's. I think the Proporta is better for daily use, you don't need to remove the XDA from the case before usage. The Inno on the other hand gives far better protection since it completely encloses the XDA.
roko,
judging from the design I can't see how the xda can be used/charged from the case, asking cause that's the way I use mine, and everybody uses their case differently...the Inno case looks to provide better protection, (I have four cases I use depending on my daily use, guys tend to stick to one case, women tend to co-ordinate the cases with their outfits and bags!!) and your right in the respect that the Inno looks good, but as always, looks don't mean a thing if it aint practical (men inclusive in my opinion :twisted: ) and as you already have the case I'd rather pick your brains on it than have a sales person deliberatley trying to sell me something based on looks....
The Proporta has an opening at the bottom so I guess you can sync/charge and replace the smartcard without having to take it out of the case. Here's a better view...
http://www.proporta.com/Zoom.asp?id=XDAcase1.jpg
But still, it is in developement, images of the final product are not online yet (I asked for them but no response so far). The final product could differ. Wait and see
And so my choice is confirmed, da girl goes proporta! spoke to them today they say no to the batttery space but I guess I can't have all
Hopefully you won't get bored waiting for it (like me) :wink:
Did you by any change asked them when the case should be ready for shipping? I keep hearing "probably the next week" :?
roko
Yep, I did ask and was told not for ages as they just rejected the proto-type last week, apparently because you would have to remove the xda from the case for charging etc and that's not what was agreed to design wise....the guy I spoke to was so annoyed he told me not to bother ordering it yet!!! to wait a month but I will... just to have yet another case to co-ordinate.
(as women do :wink: )
Another month
I'll order the Inno so I'll have atleast one case (for the time being) :wink:
I've got one (the innopocket case) and I'm very Impressed with it. Although like anything its not perfect.
Here goes an honest review.
If you think the xda is already too big, dont buy this. If you want to protect your machine while carrying it - its like having an armoured tank protecting it! Imagine your dads old tobacco tin in brushed aluminium with a neoprene 1.5mm lining and there it is.
Its very well built - it does have a serious "no messing about belt clip" that you'd have to have serious impacts hit by a car for it to fall off. I'm a cyclist (during the week ; ) - so you'll have to excuse my practical thinking!
I think the only serious damage you could do would be to the antenna, which is the only potruding part, and even then, if it was on your belt that would never happen.
I did however make one major "mod" when I got it, I got out an electric drill and file and made a headphone socket hole straight away!
Being made of aluminium its very easy to do this, in theory you could do the same for the charger connector.
Street Cred
Although its very practical, to be frank I'm embarrased to carry it in "open view" on my belt, because it is ridiculously large. Under your jumper or jacket it acceptable. Or in your baggy Jeans pocket is another fine alternative.
In use
I even answered a few calls while listening to Mp3s in slough town centre last week, obviously the nice thing is that with the standard handsfree headset you can answer the call with the button on the mic pod, and not have to get the damn thing out of the case. Obviously in normal phone use its a pain to "unholster"
I think the main oversight is a lack of a charging hole, I think a pda on a desk with a charger lead hanging out of it is asking for trouble, one slip and your "preciousss" will go swinging to a clattering smash onto the floor, so I'd love to encase it with the innopocket during charging. (I'm getting the drill & file out now!)
Opening it Up
It did seem too much hassle to change tracks on media player by "getting it out of my pocket, opening it up, changing tracks, and closing it etc. So I just listened to my mp3s on "shuffle mode" it would be great if one was designed with buttons integrated into it, perhaps so it slots into the bottom edge connector in the same way as the clip on keyboard.
At times like that I was glad of the volume control on the headphone kit!
The opening up catch is nice and firm, so its very difficult for it to open accidentally, and as it opens "upwards" in theory as long as you are standing or sitting, it wouldnt fall out.
One of my friends did force it open because he didnt understand the way it opens, but in actual fact its made the case easier to use, because the stress exerted on the aluminium hinges if you do this enable you to open it further, to about a 80 degree angle from the closed position. This means that if opened on your belt the xda delivers at 45degrees or so.
Build Quality
I think in terms of build quality it is excellent, and certainly does protect the machine All edges were finished off smoothly, all neoprene stuck down well, definately a quality product.
Capacity
Havent tried it with the extended battery, as it hasnt arrived yet, I'll let you know if it fits, or if it can be modified.
Advantages
1) serious protection
2) serious beltclip that wont fall off in usage
3) Aluminium, lightweight, tough, and easy to mod!
4) Website order to Delivery time (under a week) and thats delivering it by airmail from suppliers in Hong Kong.
Disadvantages
1) Overall Size (too big and roomy - I'd prefer a snugger fit!)
2) Beltclip: My only criticism is that the belt clip cannot be removed, its riveted on, and being aluminium, if you removed it I guess you'd never get it back on. Otherwise its the best engineered beltclip I've ever used, I wish my old Cooltrax mp3 player's case had such a good one.
3) the only downside of course is removing it from the holder. to use it, its not exactly "quick release"
4) usual packaging problem though, when it arrived it looked like it had been opened a dozen times en route, cardboard box was creased and torn "open", but the product was intact and undamaged - I guess customs at several points opened it up to see what it was. You'd hope they'd stick tape back over it. I'd hate to send anything of a greater value that distance!
Opinions
Buy two. One for "on your belt" (modding it for headphone hole)
The other for in a bag or pocket, with the belt clip removed! and mod it for charging/mp3 playback.
The one thing I like about it is that it doesent spoil the look of the thing itself when you're actually using it. The standard O2 case sucks in that regard, and looks disgusting in my opinion. And lets face it the most dangerous aspect of using a phone/pda is putting it down. e.g. falling asleep with it on your lap or chest, or even charging it up.
When its in your hand you hang on to it for grim death. Putting it into the case is the riskiest part, especially cycling along, but hey, even doing that on a pavement is a big risk! And as I mentioned this was a doddle!
Walking along and holstering it is more of an embarrassment risk than a risk of dropping it because as I mentioned, it opens very sensibly.
Possible Improvements...
1) add a hole for charger
2) add a headphone hole
3) make the belt clip removable
4) make it less "thick" (width wise)
5) slots for memory cards inside the case, although there's plenty of room to just have them "floating around" - that said, would you risk an £80 memory card dropping out while you're walking.
6) add a button for skip track for when in mp3 usage
Conclusions
Protection 98%
Practicality 40%
Style 30%
It does "what it says on the tin" :lol:
"protect your investment"
Can you please provide a cost for the aloy case for the xda & approximate delivery cost to Australia
Thanks Peter
Follow the previous mentioned link http://www.innopocket.com/EShop/Main/product.php?ID=63 and you will see the price.
I fully agree with Derek's review but like to add a couple of disadvantages:
1) The spring mechanism started to wear out in the case I had. I had to bend them back into shape.
2) Although perfectly padded on the inside there is the possibility of having the metal on the inside come into contact with your screen. Maybe it is just me being clumsy but I was nervous every time the XDA went into or out of the case.
I stopped using it and it is lying around somewhere here.
Robert[/list]
Mine's now laying around as well... climber!
Unfortunetely it wont accommodate the extended battery
Update on the Proporta hardcase:
It seems that the first 1000 will be shippped early July. Hopefully I will be one of the lucky bastards because I'm waiting for it since last January.
http://www.proporta.com/Zoom.asp?id=Alu_XDA.jpg
Hmm... Re the Proporta case, it looks like someone else had my idea about holes for connectors!
It looks a bit slimmer than the innopocket. I'm hoping it has a cutout in the back to allow for the extended battery to poke out as well...
Somehow I dont think they will think of that one, otherwise it looks a much better design. Do let us know with a full on review when you get it Roko....
Hi I got the ali case, the thing is almost twice the width, but I really needed to stop the XDA from crashing out of my pocket, so I tried it for a few days, its like an ejector seat, My xda has hit the ground 6 times in one day, I lost my pen & a big card I had in it. Sorry it has gone in the draw.
Hi, i got my proporta ali case this morning - seems quite nice Very light and doesn't bulk up the device too much! Very strong too, no way i'll loose the screen with this baby on. All connectors/buttons can be got to with the case closed.
Will test it over the next few days!
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
I always wear a belt so...
With baggy shorts you can wear the phone case backwars and have the clip facing away from your body and the phone more or less in your pocket if you wish i suppose...
put on some weight and tuck it under your belly ha ha
but serious i only use a case when i'm in work as i do manual work and tools go in my pockets... most the time my x1 is in my pocket.....
If you wear a suit jacket, it clips onto your pants fine and the suit covers the device without looking like you have a "tumor"
If you ever have to take your suit jacket off...well, then you have a device clipped onto the side. But with proper slacks and tie, it doesn't really look out of place.
From what I have noticed, most people who use these kind of cases are the ones who tuck in their dress/button-up shirts.
I prefer my pocket....
orelsi said:
I prefer my pocket....
Click to expand...
Click to collapse
Is than an X1 in your pocket or are you horribly deformed...oh, wait, your avatar says everything.
I use the sonyE generic case
it got a clip but mainly keep it in my pocket
as it's kinda hard to get off when I put it on
the side of a pair of pants
and don't even get me started on having it on a pair
of boxer shorts
I wish I dared wearing one clipped on the belt every day... it is so practical, esp when you like me always have the shirt tucked into the jeans/trousers. But it looks kind of silly, right? So I only use it when I travel and really need it because I then carry several phones, plus it's a pain if the phone drops out of the pocket when your'e cramped into a small taxicab in some foreign place.
bnaut said:
I wish I dared wearing one clipped on the belt every day... it is so practical, esp when you like me always have the shirt tucked into the jeans/trousers. But it looks kind of silly, right? So I only use it when I travel and really need it because I then carry several phones, plus it's a pain if the phone drops out of the pocket when your'e cramped into a small taxicab in some foreign place.
Click to expand...
Click to collapse
I don't mean to sound racist or anything but it looks good on white people but bad on asians...
I am asian btw, and it looks so awful on me.
Hey guys, I was just about to purchase this case but then started wondering if it would adversely affect my signal strength so I thought I would jump on here and see if any of you have used an aluminum case and what the results were...
Thanks for any info, you guys rock!
It has a very good possibility of affecting the signal since the antenna will have a clunk of metal around it. But I dont have any first hand knowledge. Why not just get a plastic case. They effect it less.
I really want a case that has a door with a window on it..do you know of any plastic one?
Anyone else have any experience with aluminum cases?
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
conradcliff said:
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
Click to expand...
Click to collapse
Sounds pretty cool, can you link us to the particular case mentioned? Other than that I have no experience with metal (aluminum is considered a metal for the banterers) cases either. Personally I would stick to plastic, but sounds neat.
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
conradcliff said:
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
Click to expand...
Click to collapse
That case is awesome. I really like it. Interested to see if it ruins the signal quality, or possibly enhance it lol I dont know.. It looks properly designed, I am sure the manufacturer took the antenna location into consideration. I would go for it. Let me know how it works out, hopefully by then one is still available. I can grab one myself.
I will have this moved for you.
Thanks for getting this moved for me Ryan..yeah, I think I'm going to purchase the case within the next few days unless someone pipes in with a negative review.
In the meantime, does anyone know where the antenna is located in the 6800?
Thanks for any help!
So, I came in here to bump the thread up one more time before I bought the case, but it was still at the top...doesn't seem like people are too concerned about Titan accessories any longer
I guess 150 views is enough though, I think I'm just going to bite the bullet and buy.
Will update once I've tested in the low signal areas that I frequent.
I had the exact same case for my xv6700 and never had any signal issues. The case worked well and kept my 6700 looking brand new!
I really liked the lexan screen cover.
I tried the seidio rubberized case for my titan. it worked awesome for about 10 months until the little tiny tabs that held it on broke off. Only a 90 day warrenty so SOL. Now I use a cudora pouch.
So let me know how the aircraft aluminum one fits!!
That's great to hear! I'm going to order it tonight and maybe upload some pics when I get it..
hi conradcliff
dont forget test review the case (how about the look, size etc) and upload the pict, i want to buy also, but it seems need 2 week to deliver it to my country
Oh I most certainly will..I'll also post the coupon code they gave me for 10% off, hopefully it will work for anyone.
Initial Review: Monaco Aluminum Case for Mogul/6800
Short answer: A well designed, sturdy case well worth the ~ $20 price. I'll add some photos soon. Sorry if I stepped on anyone's toes who intended to write one of these up, but hey, two opinions are better than one!
I've had three of these cases for three separate Sprint 6800's. Two black, one silver. For those familiar with Monaco Aluminum Cases (they made/make these for other phones, such as the 6700), this embodiment is just as good.
Pros:
Very solid design - this case can easily outlast the life of your phone. Aside from slight exterior discoloration, dings, and scratches, this case should easily withstand all normal, day-to-day use.
Inner liner - this case includes an inner liner made of neoprene that protects the phone from minor scratch/abrasion marks; that provides a very snug fit for the phone; and provides *minimal* fall protection. Two-story drops and projectile usage by angry girlfriends are not protected.
Access - the case provides access to all buttons, dials, interfaces (except for touch screen & slide-out KB). Luckily, almost all functionality of this phone can be effectuated without the touch screen (not the TP, grrrr), so you will not have to open the case too often, which is very nice. When you do open the case, the keyboard slides over the open top of the case nicely.
Vents (Air/Signal) - there are vents on the top, back, and right side of the case for air and/or signal paths. I've experienced no signal difference, or even heat difference, with this case. I'm sure it does insulate the phone to some degree, but it's minimal.
Belt Clip - the case comes with a belt clip and swivel that are relatively secure and convenient. I've had one belt clip split (the plunger portion), but it is still very usable. You don't have to use them, but I do. The round swivel that screws into the back of the case provides a nicer grip of the phone, IMHO. If you don't like either, you don't have to use them.
Cons:
Weight - it does add weight to your phone. It's not extreme, but holding the phone for extended periods of time may prove annoying by some with this extra weight. I don't mind it at all, and I have a headset and use speakerphone anyhow.
User Adjustment Required - Out of the box, this case is NOT ready to use! You absolutely must gauge how well the metal clip engages the main body of the case. Every case I've received required me to slightly bend the clip inwards to provide a stronger hold. If the hold is too weak, brushing against the side of the case (by your arm when walking with the case attached to your waist side, or by anything you may brush against) can result in your phone falling out to the ground. So, adjust the clip right away, and ALWAYS, periodically check it, as repeated opening may loosen the hold over time. Also, when wearing this case attached to the side of your hip, attach it to your left side so the metal clip and catch of the case are facing behind you. This way, brushing against something while you're walking will not accidentally open your case allowing your phone to drop out.
Plastic Cover - this cover can scratch. I tried placing a screen protectors over it, but they would never stay. The oil from your face/hands/etc, along with the lack of a frame protecting the edges of a protector from friction are mostly to blame. However I've learned that with a little care, the plastic screen can survive everyday use quite nicely.
So, I highly recommend this case!!
10% off coupon code -> EIWQC1257830
"Simply insert the coupon code during our checkout process and instantly save 10% off the merchandise.
You can use the coupon up to 5 times. This code will expire after 60 days [from 10/7/09]."
There's more to know though so don't buy until you get my review..hopefully tomorrow.
I'm looking for a specific case for my nook color. Sadly, so far, none of the ones I have been looking at fit the bill.
The needs are:
1. useable inside the case.
2. waterproof (under 10 meter depth, mostly to keep rain or accidental drops in the tub from killing it)inside the case
3. Able to take a drop of 4 feet and not damage the Nook Color
4. able to take the weight of a person accidentally sitting on it.
I'm not worried about charging or listening to headphones while it's in the case. But, so far, either I've found ones like the oberon ones, which fits the shock and structural needs but not water needs, or ones like the expensive thick ziplock bag, which does not provide much more than waterproofing.
Is it just nuts for me to want to protect and armor my e-reader to a point I can use it when waiting for dawn while goose hunting, or out camping?
What you are looking for is made by Plexicorp, based out of San Francisco. They make a variety of products using a patented transparent aluminum which was developed in 1986 by Dr Mark Nichols.
Oh ha ha. we all know Scotty gave the formula to him, two finger typing on an old mac.
Seriously, a metal backed cover and frame, with padding and waterproofing, and a transparent screen cover like the fancy thick ziplock bag would work. But, as I said, everything either has the drop/sit ruggedness and not the waterproofing, one has the waterproofing and not protection, and one has the protection and waterproofing, but you can't use it in the case.
it's beginning to appear like I'll have to break down and design one my own self, since none of the makers are filling my needs. you'd think with all the campers, hunters, fishers, beachgoers, pool gatherers, and even readers soaking in a bathtub, let alone drunk college students, someone would make SOMETHING like this.
sounds like you need to be more careful with your 250 dollar toy. go get a travel case lined with foam. water proof, shock proof, and idiot proof. after that put the travel case on a three foot leash and strap it to your neck. only hit the ground if your a midget.
http://www.amazon.com/Pelican-1300-Case-Camera-Yellow/dp/B00009XVKW
You will look real snazzy walking around with this.
or, I guess you can also infuse it with the power of all mighty Odin and hope that works. i think your asking for a little too much. hunters go outside to hunt. fishers go outside to fish. hikers go outside to hike. any of the above that would use a product like the nook would just use the ziplock bag style or a hardcore pelican case and protect the **** out of it. and not take it out of said case during the hurricane.
most outdoor people would just use this
http://www.amazon.com/Pelican-1050-Micro-Case-Blue/dp/B001CNNEXY
but i doubt you want to put that in your pocket at 3.1" thick. but even with that you want a flap to store **** in. if i were you i'd start praying.
Wow, I have to say, you've got me wondering what you're planning on doing with the Nook! I'm intrigued though, I've thought myself it would be nice to have a super rugged gadget. It looks like the Otterbox case is just going to help with impacts, etc. I did find this old thread which might help..
http://forum.xda-developers.com/archive/index.php/t-749995.html
Ok. the cases I'm seeing posted fall into category 3, has the sit proof, crush proof, waterproof, but not USEABLE inside the case.
let me show you what I am looking at. Of the premade factory cases:
Option 1- URL redacted because of silly posting rules, but the Trendy Digital waterguard waterproof case. Has the waterproofing needed, but does not provide decent enough protection otherwise.
Option 2- Oberon cover, replacing the plastic inserts with either sheet steel or aluminum plate. But, this is the opposite issue from Option 1. Not waterproof.
Option 3- One of the cases mentioned. But, doesn't allow the device to stay waterproofed when you want to use it.
What am I wanting to do with it? Well, I want to be able to take it hunting, to look up tides, help identify geese, or when it's dead slow, read a book. It's often in the rain, around lots of salt water, and can get dropped or stepped on if some geese swoop in and I need to hammer. Or, take it camping, and not worry about getting caught in the rain, dropping it, or falling on it trying to carry it about. Many of these cases have 2, even 3 parts that would work, but without the whole enchilada, it's not going to do what I need.
Edit: BTW, I've taken an ipod 5g video out for 2 seasons and it's still working. the NC is actually meant to be a replacement for it, as the battery is slowly dying.
I am using a Trident Aegis on my NC. I tried it out in a medium (7"x10") Coleman waterproof pouch and the touchscreen worked through the plastic.
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
None of the magnetic items for the phones will cause any harm to your phone.
You may notice that the stylus doesn't work where the magnet is, but it will work just fine when you move the magnet.
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You do know many manufacturers use magnets in their devices and accessories, including Samsung and Apple, right? Every Apple smart case / cover utilizes magnets and (as much as I love Android) I can honestly think of no more reliable tablet than the iPad.
kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
kmarx said:
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
Click to expand...
Click to collapse
What sort of issues have you seen?
It seems strange that Samsung would release a product that would interfere with one of its flagship products and sell it as an accessory.
Mayonesa said:
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
Click to expand...
Click to collapse
I'm not sure if this is specifically what you're asking about, but I've been using a Scosche MagicMount (http://amzn.com/B00I608BJ8) for my car dash and love it! I lay the larger metal plate (it comes with two sizes) at the bottom of my case, oriented where the longer sides are parallel to the bottom of the phone (let me know if you need a picture). I don't stick the plate to my phone, but rather set it inside my case. It turns out to be the perfect length and height for the Note 5. Wireless charging and Samsung Pay still work great. I used that picture of the Note 5 where someone made the back of transparent to make sure the wireless charging coil inside the phone does not over lap with the metal plate that comes with the mount.
I bought a nice leatherette case for my Note 5 only to find that the S-Pen does not work on the right hand side where the magnet is. I took it off immediately and went back to my Body Glove case.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
charlesrogers74 said:
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
Click to expand...
Click to collapse
-Sigh-
Like I said. "Magnets will in no way harm the phone"
This isn't harming your phone, it does do as you have seen which is a TEMPORARY issue and has already been discussed, it will cause no permanent harm to the phone.
I don't know about magnetic holsters but magnetic car mounts most definitely YES. I've used many holsters over the years, for all kinds of types of phones. I haven't really thought about it till I saw this post. My buddy has a good magnetic car mount for his s7 edge, but I don't really know anyone at the moment that's using a magnetic holster. Just my opinion though, the last time I used a holster was way back in January and it was actually pretty good. It was a best buy branded platinum, with kickstand holdster and case like a 3 in kind of deal but not magnetic. It fit could on my belt clips for my jeans and suit pants. Good luck
bought the Bracketron brand at best buy, the magnetic part is on the mount, it is a metal plate stick to your phone so no interference from the magnet, not owning a note 5 tho.
I put in some small tin paper cutouts INSIDE my note 5. I took the back cover off, peeled the sticker with the color/logo and spraypainted it a nice black then just glued the tin paper inside of that. Then I took a flat wireless charger and added neodymium magnets to it, modded it to be as small/thin as possible then covered it up with some black thin leather I bought from Michaels. I mounted it up to my car's console and now I just plop the phone onto it and it sticks tight and fast charges, no wires or case. Worked perfectly, but in hot weather the leather would become a bit slippery so it would slip off, but I fixed that with a couple of very small circular double sided gel tape on the bottom just to provide a bit of friction. I've ridden like this for the past 5 or 6 months and it doesn't slip or fall off at all, heavy bumps, hot weather, nothing dislodges it.
The only thing that doesn't work is the spen, and that's only directly over the magnets, but I wouldn't write on it anyway while it was mounted. Otherwise I've had zero difficulties with it. I'll post up pics if anyone is interested, but it's a bit frankenstein looking.