Database Develop

BlueAngel DOC repartitioning tool

I've attached a program that can repartition our devices. You can enter the desired size of your "Extended_ROM" in kilobytes. Min - 128 Kb, Max - 64 Mb. The remaining part would become your "storage".
After formatting the device should be rebooted. Of cause you should backup the contents of Extended_ROM and Storage folders. If you use "Permanent Save" feature, during first boot OS would ask to recreate files in your "storage" folder.
I'd recommend to use 128K extended ROM with only theft prevention program in it, and all other space leave a "storage".
Usage:
unrar Repart_DOC.rar archive to any directory on your device and run it. Enter the desired Extended ROM size, press "Format now" and reboot. If the program outputs format error - round your size to the next 128 Kb boundary and try again.
Theoretically this program can run on other devices that use DiskOnChip(R) TrueFFS(R) driver, but this is not tested.
In the case of hard reset the extended ROM would be hidden, but it should remain writeable forever - my program resets unlock password to zeroes.
and:
Use this program at your own risk!!!
P.S. I've also attached the source code of this tool. It should be compiled with VS 2005 beta 2.

Thanks
Mamaich Thank you for the tool !!
I just added a Default Button to the tool in which will revert back the amount of the EXTENDED_ROM to the original size
How To:
-Run the tool and press Default!
-Soft reset
Ps: Don't forget that this tool will wipe your Data on the Storage and the Extended_Rom, so remember to make a backup for the stored data!
***Use it on your own risk!!***

One more favour needed
Dear Mamaich
SInce there is no WM2005, I sincerely request if you can alter the file system in such a way that windows folder is in the storage......That would be gr8...Pls Pls do something about it....and I know that you can do it.

Tool works fine....one has to first unlock the Ext ROM

This tool is working like a charm :lol: Thank you mamaich :twisted:

and which tool is it for unlocking the external rom? anyone, anyone Buller? I want to try this out.

szamot said:
and which tool is it for unlocking the external rom? anyone, anyone Buller? I want to try this out.
Click to expand...
Click to collapse
Here is the unlocker
install it to PocketPC, then use "unhide", "unlock". After reboot the "Extended_ROM" folder would become visible and writeable.

It is a very great tool, mamaich. I can select myself any size of the \Storage.
I would like to request (if it's not that difficult) if you can have an option to select for Factory Defualt Setting.
I used this tool to repartioning my XDAII (WM5). It work fine, but I can't unhide the \Extended_ROM folder. The Extended ROM Unlocker I used is the modified one for WM5 by toenailed. I do any thing wrong?

I don't have 2K5 so I cannot help you here.
And I don't remember the "factory default" settings so I cannot add them to the program. You may select something about 15Mb as a size.

So I can install the application and I can unhide the folder. Reset to complete. However when I try to unlock I get the following:
Error:
FL_IOCTL_BDTL_HW_PROTECTION - A device attached to the system is not functioning.
I press OK then I get another window Debug and the message says extrom unlocked, press OK.
I start Repart_DOC and I try different sizes anthing from 128K to 10 mb. I get another Error Window.
FL_IOCTL_FORMAT_PHYSICAL DRIVE failed.
Thoughts anyone.
I tried variations of doing one command at the time and soft resetting the device but it all produces the same error messages.

Results with the Alpine.
Using BA DOC tool, it is opposite. If I put in 128 for ext ROM it makes .11 Storage. If I put in 61000, I get 59.11.
Ext ROM stays the same. After running loadvdisk, it becomes visable and is 23.96 13.96 in use and 10 free.
Ext ROM must be on other chip or is read only or???? You will know better than I!

Ohhh ya,, THANK YOU !!! YOU ARE A GOD! 8) :lol: :wink:

Sorry, can I ask which storage will be memory added?
We have the 128 RAM with program and "storage", and the "storage" folder that we can see under file explorer.
And do we need to do a "hard" reset for this?
Many thanks for your reply.
Cheers,

chris_khho said:
Sorry, can I ask which storage will be memory added?
We have the 128 RAM with program and "storage", and the "storage" folder that we can see under file explorer.
And do we need to do a "hard" reset for this?
Many thanks for your reply.
Cheers,
Click to expand...
Click to collapse
Chris,
This is for the storage memory which is 47 mb and then you can combine your extended rom to make one big storage of 64 mb. It has got nothing to do with the default memory or storage.
Hope this helps.
Hemant.

Worked flawlessly. Thank you, mamaich!

no ideas for my little device not found issues? As per above.
Thanks

harrier
Harriers use different passwords.
Use superdave's unlocker exttools.exe
http://www.myehud.com/xv6600/cabs
(The password is ReIrRaH, not LeGnAeUlB)
E

ah, that worked like charm, thank you very much.

Slightly confused here guys..
If you remove extended rom - how do you re-install the required apps after a hard boot? directly from the storage card ? I have tried various options and it did not work for me..
1. Changing Registry to run Autorun directly from storage card (guide from xda-dev) - did not execute ! god knows why..
2. Creating a Batchinstall script - (guide from xda-dev) - did not run..
3. cloning - was a very expensive option - so dropped out.
Would love to increase by Storage also - but need a solution to this...help me out guys...
rgs/DD

devdarshan said:
Slightly confused here guys..
If you remove extended rom - how do you re-install the required apps after a hard boot? directly from the storage card ? I have tried various options and it did not work for me..
1. Changing Registry to run Autorun directly from storage card (guide from xda-dev) - did not execute ! god knows why..
2. Creating a Batchinstall script - (guide from xda-dev) - did not run..
3. cloning - was a very expensive option - so dropped out.
Would love to increase by Storage also - but need a solution to this...help me out guys...
rgs/DD
Click to expand...
Click to collapse
1. just create a Folder in your Storage Card.. Name it .. 2577 <-- very important
2. Place the AutoRun.exe and ExtROM.zip in the Folder \Storage Card\2577\
3. During a Hardreset, after the Screen Aligntment and GMT settings(Welcome.exe) make sure you will see the notification .. just like in the pic .. then tap YES
4. Then it will start to install everything in ExtROM.zip ..
5. After it install all application it will asks to reboot ..
PS:
in case you didnt see the notification .. just remove the SD/MMC wait for at least 15 seconds then put it back on the Slot
you can add or remove some files in ExtROM.zip .. just use Winrar or Pocker Rar .. and always check for Archive Error .
>>Writen By Toenailed<<
Here's the autorun file as well!

no data cable!

Hi guys iv just bought a "svp m2000" running wm2003se.
When i got the ppc i was missing the cable to connect via active sync.
Im asking is there any way og upgrading to wm5 or wm6 via a sd card?
Any Help on the matter would be great.
Thanks.
Andy...

- format a SD card with FAT32
- extract the .NBF file from the rom image you like
- rename the .NBF to *.NBF and copy it to your SD card
- put SD card in phone and start it in bootloader (hold the record button on left side and POWER button at same time and stick with stylus in RESET on bottom)
- confirm flashing on screen
- flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes.
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
I dont know what to rename the .NBF to but expriment along the lines of BLUE ANGEL
hope i helped,
Josh.
Edit: found another way
*put your blue angel on charge
* Download ntrw.exe.
* Copy ntrw.exe to C: \.
* Dos Command access to C:\
* Type ntrw write [ROM name].nb1 E:.
* Put your Blue Angel into bootloader mode with the SD card in the slot and leave it for about 30 mins (yes it freezes just leave it )

nice tutorial, since i am using a vista 64 pc i will give that method a try sometime, too, but there are some things not quite acurate/right in your description:
"- rename the .NBF to *.NBF and copy it to your SD card"
to what does it need to be renamed?
"(hold OK button on left side and POWER button at same time and stick with stylus in RESET on bottom)"
the button on the side of the device is actually the record button, the one with the tape on it.
maybe you could edit your entry, and as soon as the procedure is found right and precise enough, it might make the wiki.
very nice work!

it didn't work

Thanks for your help . ill give it a go now and see if anything happens..
Andy..

@chef
beakybal4 said:
- format a SD card with FAT32
I dont know what to rename the .NBF to but expriment along the lines of BLUE ANGEL
hope i helped,
Josh.
Click to expand...
Click to collapse
yes i know it might have been a bit wrong because i scoured the internet for ages and only found a hermese SDcard flash apart from the other one i posted after the "EDIT:"
anyways, i'm interested to find out how to do this.
There isnt a tutorial, currently at the time of writing, of how to do this so it would be great if we could make a breakthrough
Josh.

change operating language phone xperia x1

hey guys
i really need to change my operating language phone in xperia x1
i want it in English not in Dutch
can anyone help me plz

When you need to do a hard spl and when download a wwe rom, there is a thred about it

where can i find that plz would u like give me the link

1. Hard-SPL, please read before you ask more
http://forum.xda-developers.com/showthread.php?t=431218
2. WildChilds ROM: http://forum.xda-developers.com/showthread.php?t=510188
Good Luck!
yopi_smoni said:
where can i find that plz would u like give me the link
Click to expand...
Click to collapse

mattiL said:
1. Hard-SPL, please read before you ask more
http://forum.xda-developers.com/showthread.php?t=431218
2. WildChilds ROM: http://forum.xda-developers.com/showthread.php?t=510188
Good Luck!
Click to expand...
Click to collapse
if u did hard spl once, do not do it again... to change the lenguage just flash any WWE rom you want !

i did that but i nothing happend
1- extract the file you got and rename it to ruu_signed.nbh
2- put the renamed file onto your memory card.
3- remove and insert the battery
4- press the volume down button and while pressing press the power button (keep both button pressed)
5- the mobile should start and give your three colored bars, keep on pressing.
6- a screen will come up showing it is starting to update. now release the two button.
7- wait till all update/intallation has finished.
8- remove and insert battery.
9- power on your mobile and do the initializations and wait for it to install some other programs and files.
10- phone will restart now for the final time.
here is what i Got
i get a 3 colour and
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
serial
then NO IMAGE and back to the above screen.
and i did that too
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
but i got eurrer 202 what sgould i do now plz

Two problems here (at least)
1. You did not Hard-SPL (the three coloured screen should say something like OliNex 0.72. )
2. To load ROM from memory card, call the file KOVSimg.nbh, not ruu_signed.nbh, that's for loading from windows ROM update utility)

Image file not found, help please!

Hello people.
I have minor problem over here, I have flased my rom before but in a different way Through the xperia x1 phone with the usb cable in, all I had to do was to install a file through the pc.
But there is another way Id like to do it now, I have a .image file and have renamed it to "kovsimg.image" and I did also install HARD_SPL before.
To make it easier for u to help me.
1. Install hard spl
2. put the kovsimg.image into the memory card
5. Remoed the USB cable
3. turned of the phone
4. Pressed down lower sound and on/off button together (I got to the correct place where there are different colors.
5. Image file not found!
At nr 5., that is where the problem is. Why does it say Image file not found?
I have also tried with .nbh file 2, occuring the same problem though.
Thanks!

The filename should be "kovsimg.nbh"

sweflo said:
The filename should be "kovsimg.nbh"
Click to expand...
Click to collapse
But in another thread that is sticky, said that it can both me .nbh and .image
So the fact that was said is wrong I guess?
Well that will not either fix the problem, before the .image I tried with a kovsimg.nbh file and had the same problem.
Thanks

Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..

sweflo said:
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
Click to expand...
Click to collapse
Im sorry but how exactly do you mean?
If you mean that the "whole" file maybe didnt get copied into the mem card?
It thats what u mean, I just checked it and both files are 213mb so :S

Check the spelling "kovsimg.nbh" and copy the file from the computer again

sweflo said:
Check the spelling "kovsimg.nbh" and copy the file from the computer again
Click to expand...
Click to collapse
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough

Freak174 said:
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Click to expand...
Click to collapse
You only hard_spl ones, you can make so many flashings you want but remember to do a hardreset after flashing..

did u try to search the forum?
http://forum.xda-developers.com/showthread.php?t=469300

boy, you really haven't read the stickys or haven't understand them fully...
just be glad that this flash-process is pretty stable and it's almost impossible to brick one's phone beyond revival.
read them again!
but to summarize it:
- you only have to do hard-spl once. until you flash stock-spl (that's not stock-rom!) it remains there forever.
- regardless if flashing via usb or microsd, the filetype has to be .nbh
- looks to me as if you didn't change the filetype of the image, but just the filename. so it actually is "kovsimg.nbh.image" right now, which will not be accepted by bootloader (the tricolor-screen-thingy).
check these two things before flashing again:
1. check if hard-spl was successfull:
take your sd-card out, and enter bootloader. it will now stay on tricolor screen. there it should read "SPL-0.72.OliNex". (among other stuff)
if it reads "SPL-0.72.0000" or "78" you haven't succeeded in hard-spl -> read the sticky again.
2. check the filetype of your image-file:
get your windows to show filetypes (how depends on which version, google it) and make sure the file's name is really just "kovsimg.nbh", nothing more.
(via usb-cabel it has to be "ruu_signed.nbh", btw)
put the kovsimg back on your sd-card (directly to root, meaning not into a folder), put it back in and enter bootloader again. follow the instructions on screen.
if you followed these instructions correctly, it will work now.
to flash any other roms in the future you just have to name the file right and put it on your sd-card -> bootloader. (again, hard-spl will not be needed.)
after flashing finished do a hard-reset! when flashing via sd you have to take the battery out and back in to do a restart. that's the perfect moment:
- take battery out
- put it back in
- press and hold (!) the two silver-buttons under the screen
- press the power-button shortly (while still holding the two silver ones!)
- phone will vibrate and enter a white screen
- release the two buttons and follow instructions on screen

When you downloaded the ROM did you make sure to extract it first with either WinZIP or WinRAR before you renamed the file? ALL ROMs are compressed usually with WinRAR to save time uploading. Then you download and extract the file. Then you rename the image file to the respective name on how you wish to flash your phone.

Thanks for the replies but the problem is still here :/
I checked the bootloader and it said "SPL-0.72.OliNex", which means I have installed the HARD_SPL correctly.
Atm I have Energys rom installed, but I didnt install it the same way as this way I am trying to do now. I just had to have the cable checked in and follow an installation and it was done.
Right now I have tried with several roms but none has worked, for the moment I am trying to get this rom to work "Valkyrie_v3.8 FireStorm" without success ofcourse..
I did everything correct, I know that I have. I also followed a video guide to check I made it correct.
The file name is kovsimg.nbh (Ive checked it and it is a .nbh file, my brother also confirmed it).
When I try to flash it, the USB cable is out, the phone is shut (tried to pull out the battery 2), but still the same problem "No image file!".
And yes, I did first extract the file. The size has the same amount as in the winrar file so nothing is missin. After that I changed the file name and copied it into the root of Memory card.
PS. Is this the only way to flash it, I mean is it not possible to do the same way as I did with energy's? (Its the same way as installin HARD_SPL)

Try using a different SD card.

Im Packing said:
Try using a different SD card.
Click to expand...
Click to collapse
Befor this make sure your microSD is Formatted to fat32 using a PC. If not, it will not work.

or you could just do it the same way as the energyrom
i.e. customRUU.exe

well, sounds like it's your sd-card. probably formating it again with fat32 will help. there are also reports of some sd-models/brands not working at all. there's a thread for this by gtrab, i think. although there it says "kingston" cards don't work at all - i'm flashing with a kingston 8gb for almost a year now... ^^)
if you choose to get customruu.exe for usb-flash DON'T use the one from hard-spl, that's a special one.

try remove SD card and flash without PC

The SD-cards format is Fat32, but I used a different way this time by doing as Jonny~ mentioned and it worked all fine!
Thanks for the help, great service.
Take care and wish me luck in the future with my xperia

Can someone help me convert this ROM ASAP?

My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!

Dragonmaster0430 said:
My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!
Click to expand...
Click to collapse
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!

if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom

groove6969 said:
if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom
Click to expand...
Click to collapse
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?

If you are on AT&T, you have to restore the stock ROM or you will be charged. You also need to restore the SPL.

Problem
I flashed abck to default stock rom some time agon and they voided my warranty just because id didnt return to stock spl. They are full of nonsense over here

i have done numbers of returns of from tilt 1 too the fuze and the tilt 2 for warranty exchange and never had a problem but if u feel confortable follow the steps from the previous post to conver the file over just extract the file and then convert the name over to rhodimg for the nbh filr and put to ur main root of the sd card and flash it that way it will install the stock rom

Doo Doo said:
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!
Click to expand...
Click to collapse
When I right-click on it, i dont get a option for "Extract"

Dragonmaster0430 said:
When I right-click on it, i dont get a option for "Extract"
Click to expand...
Click to collapse
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?

Doo Doo said:
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?
Click to expand...
Click to collapse
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though

Dragonmaster0430 said:
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though
Click to expand...
Click to collapse
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It

Doo Doo said:
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It
Click to expand...
Click to collapse
ok so I got the file on my SD card, but I forgot the button combo to flash it, I get to the tricolored screen then it takes me to the hard reset. What button combo do i need to flash?

Think i got it!

Just let us know when you need help with flashing back to stock rom btw with the stock rom that was just updated for the AT&T with sense it has a lot of problems so you may want to flash it as soon as you get the replacement.

Dragonmaster0430 said:
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?
Click to expand...
Click to collapse
Just make sure to flash stock rom and respl your phone if you hgarsled it. coz spl voids the warranty.
it doesn't matter how many softwares you have on your phone when i sent my phone i had spbmobile shell installed on it plus nitrogen core player and all the crap so it doesn't really make any difference.
my phone had a little crack near usb and when they asked me i said nothing is wrong with it there is not even a small scratch on my phone