Hey
i have made a little cab file with sliding sounds for the keyboard.
it is my first attemp to create such a file, and it is my first attemp to give back to the community.
the additional sounds are souds i have found in the forums of XDA.
so credit goes out to the people who have created and shared them.
so far i have renamed the original sliding sounds to "HTC name" and the name stands for the original name of the sound.
i only added a few soundsheme`s as it is a tryout for me.
if i get good responce i will try to add more sounds to the cab.
the sounds i have added in version 0.01 are:
9"Vista"
8"Starcraft"
7"Licht Saber"
6"Resident3vil"
5"Orgasm"
Keyboard SlidingSound 0.01.cab
the sounds i have added in version 0.02 are:
19"Mo Simpson"
18"Mission Impossible 2"
17"Mission Impossible 1"
16"Homer Simpson"
15"Flanders"
14"Danger"
13"Daffy Duck"
12"Bugz Bunny"
11"Bart Simpson"
10"Apu"
9"Vista"
8"Starcraft"
7"Licht Saber"
6"Resident3vil"
5"Orgasm"
Keyboard SlidingSound 0.02.cab
install at youre own risk.
install to device.
after install, soft reset device.
For those people who want just the original files.
4"HTC Mechanical"
3"HTC Synthetic"
2"HTC Piano"
1"HTC Xylophone"
0"HTC Wind Chimes"
grab this cab --> original SlidingSounds.cab
p.s., i have very little time on my hands.
and if it does not work, just forget this thread.
here is super mario, simpsons, and transformers
thx`s, i will ad them to my next cab.
is the first version working for ya?
Works great...thanks!
ok, created a new Cab
Keyboard SlidingSound 0.02.cab
but most off the sounds sheme`s don`t work on my device.
i dont know why.
so if any one could take a look at it.
i also made an cab with just the original sound sheme`s
original SlidingSounds.cab (not tested yet)
it is realy buggin me why the other sound sheme`s don`t work.
so before i move on i have to figure this problem out.
EDIT: Version 2 is now working.
limited the sound sheme`s to 19 pieces.
had to shorten the sound files but it sounds ok to me.
Big thxs to herg62123
groofoo said:
ok, created a new Cab
Keyboard SlidingSound 0.02.cab
but most off the sounds sheme`s don`t work on my device.
i dont know why.
so if any one could take a look at it.
i also made an cab with just the original sound sheme`s
original SlidingSounds.cab (not tested yet)
it is realy buggin me why the other sound sheme`s don`t work.
so before i move on i have to figure this problem out.
Click to expand...
Click to collapse
looking at it now
1. danger (14) you have an out wav but no in wav in settings
2. the wav files can only be 1 second long....meaning the wav file needs to be about 5 to at most 10 kbs in size. i see larger files than this.
ah, ok.
i will try to shorten them.
And these install to the correct location on the device when you run the cab? (after you select the location to install the cab, of course)
yep.
the soundfiles are going in the windows dir and some reg entries are added.
Works great!
THANKS A TON!!!
ok i just installed this app, after restarting my phone and slide my keyboard on my touch pro, the slider does make a sound, were do i go to change the sound, because its not any of the cool sounds that were advertised with the first link
Thanks Chris
start -> settings -> personal -> keyboard sliding sounds.
there you can select slidingsounds.
i just looked and don't have that on my touch pro
works great on my raphael also on kaiser from my girlfriend (LOL she will be frightened if they want to use the keyboard, they still do not know that there are new sounds installed and i set duffy duck "aaaahahaha" as sliding sound )
Sliding SOunds for Touch Pro
groofoo said:
start -> settings -> personal -> keyboard sliding sounds.
there you can select slidingsounds.
Click to expand...
Click to collapse
I also don't have that option there as well. Did I miss a step or do I have to have a custom Rom to ee that option. I hear the sound when opening and closing my keyboard but there is nowhere to change the sound.
link for Keyboard SlidingSound 0.02.cab is dead
Someone give me it plz
pri5 said:
link for Keyboard SlidingSound 0.02.cab is dead
Someone give me it plz
Click to expand...
Click to collapse
confirmed links are dead can you re upload please.thanks
links had been expired
can somebody upload them again?
Related
Does anyone know where the sounds are for the slide out keyboard, when you slide it out there is sound EX. Piano, Wind Chimes etc. Where is the sounds located in the phone, Windows? Because it would nice to change it to what you want, or have your own sound and convert it to the sounds that would work when you slide out your keyboard. Anyone know where it is?
rico002 said:
Does anyone know where the sounds are for the slide out keyboard, when you slide it out there is sound EX. Piano, Wind Chimes etc. Where is the sounds located in the phone, Windows? Because it would nice to change it to what you want, or have your own sound and convert it to the sounds that would work when you slide out your keyboard. Anyone know where it is?
Click to expand...
Click to collapse
Got this from another thread a while back - was going to just link to it, but couldn't find it so I attached the file here.
I actually turned mine off in the end though.
thanks so much, i probably will turn mine off too, but if you can get like an mp3 song that you like and just get a clip or something or like record your own voice that would make it lot better, and where is it in the phone though? someone needs to tell me how to create cabs.
I haven't tried the cab changing the sliding sound is a bit of a process.I only just figured this out and i had some inspiration from a post on Modaco.
The opening and closing sounds are wav files stored in the \windows directory on the phone. There are three files total and the naming convention of the existing files are: 1.wav; 1_in.wav, 1_out.wav. 1_in is the sound of the slider closing while 1_out is the slider opening. I'm not sure if you have to keep this convention or not and you'll understand why in a second.
Using a registry editor navigate to: HKLM>software>HTC>SlidingSound. Here you'll find the keys for the existing slider sounds (0-2 on an ATT Tilt rom). Inside each key are three values: default, in and out. If you check the properties of each value you'll find the name of the sound and the filename for the in and out sounds.
All you have to do at this point is to copy the entries into a new key with values to match your filenames. I kept the numerical sequence (0,1,2, 3).
The more I think about it I don't think you need the 1.wav file at all just the in and out wav files but that's the info I got from the Modaco form topic about changing the slider tone for the VOX. I'll have to try and see what happens. Hope this helps.
Oh yea it does, even though i might not be able to do its great to understand or know something about it, thank you so much
OK, ive created the wav files ( default, in, out) created the new key and new string value but i dont know how to create the value data which is where i think after i get i can create a cab, but i dont know where the numbers and letters lead.
just download the attached, and the sounds will show up in the drop down. just like that.
Interesting...volume control is done through the main settings volume menu?
Hmm, I've installed that .cab posted above, but I can't find it anywhere...
I've don this a couple of times but never used a cab to get it done. using a registry edit (phm, etc...) is much easier. put the .wav file in the phone windows folder on your phone and then use the editor to write the paths. do a serch for a link to detailed steps.
thanks
thanks for the sound cab for the sliding open and closed it worked really well, just a shame the lightsabre opening clip isnt long enough, seems to stutter then nothing,as for closing it sounds perfect
i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
woow, does it work on any Device ??
I installed it, nothing shows up in the today screen. I've tried to play around to make the cube show but nothing happens.
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
herg62123 said:
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
Click to expand...
Click to collapse
Nice it work after I configure it.
EDIT: Anyway to change it from Spanish to English?
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
ladytoast said:
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
Click to expand...
Click to collapse
Haha yeah herramientas mean Tools in Spanish.
I had to remove this program because it was messing up with the slide 2 unlock program.
Sensational find, well done
The program works great and has a huge coolness index factor....
I tried to set the photos to open a file in the storage card and would not do it. Is it limited to opening files that are only in the device memory? Can it address files in the sorage card?
Nice program overall.
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
taiseer999 said:
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
Click to expand...
Click to collapse
Well, just un-installed the Spanish version and installed this. Appears to work perfectly, I can't see any problems at the moment. I had to rename the FTouchFlo folder so that the configuration tool would work but other than that this was too easy.
First class work!!
go into config cube and all word editing done from there.
found 6 side cube vista like and settings to change the programs
herg62123 said:
found 6 side cube vista like and settings to change the programs
Click to expand...
Click to collapse
.... but not working on Kaiser!
TQM
Hi,
just one question: does the TouchFLO CUBE work on the TYTN II ?
I heard that on Tytn II it needs a cooked ROM not just a sw on top of already installe TouchFLO.
Could somebody tell me something ?
Thanks in advance
works perfectly after configuring it, gotta get use to the spanish though but i guess im taking it as a humor thing LOL
hi i have problem with the ftouchflo after installing it .....
i do have a problem with the text on mine, i mean in office words and messaging,
I cant select the text (that is to use stylus click drag a paragraph of text) to be copy and paste or something like that.......... i cannot select the whole text...maybe u can help me?? this applies in excel,words, messaging, notes, task ...but in appointment i can select a few text.......................also in resco explorer, normally i can click drag and select a few files to multiple delete (and no i dont wanna use the multi seelect, its extra buttons..)
and btw i have added all the above mentioned files intothe config for exclusion of scrolling and stuffs..........so maybe u can help me? thanx alot
I think the touchcube thing is cool, but i would rather it only works on the homescreen, its just annoying anytime else, when trying to do daily activities and you bring up the cube or minimize the program. can this be done?
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
fluxs2 said:
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
Click to expand...
Click to collapse
deinstalled everything for the third time.. did a reinstall.. copied all the folders again to "PRogram Files" and guess what... IT WORKS!!!
In case anyone wanted to replace their Kaiser/Tilt sliding sounds with Transformers transformation sounds, I've included the wave files in a ZIP. I don't know how to package them up for mass consumption, so you'll need to do some RegEditing:
Extract the two .wav files from trans_slide.zip and place them in \Windows
Open your favorite mobile registry editor and drill down to HKLM\Software\HTC\SlidingSound
Create a new key with the next available number. I believe the default is 3 (0, 1 and 2). So add a key called 3
For the "(Default)" value enter in "Transformers"
Under the new key add a REG_SZ called "in" (without quotes).
For the value of "in", enter in transform-dn.wav
Create another REG_SZ called "out"
For the value of "out", enter in transform-up.wav
Exit the registry editor
Go to the Sliding Sounds configuration and now you should see Transformers listed as an available sound.
Alternately, you can go to the SlidingSound (the parent of 0, 1, 2, and 3) key and change the REG_DWORD value of ActiveSlidingSound to 3.
You can use the instructions to make your own sounds, but it appears that they must be .wav files. I tried .mp3s and it did not work)
The sounds are ok (a bit loud actually). I found them on the net. If you find better ones, I encourage you to use them. Or you can use Audacity to modify the sound to your liking, which I may do when I get too annoyed by the volume.
BigBHaller
Very Cool
This is a very cool change with great instructions. Thanks for the post.
will this work on TTyn hermes ??
Alternative sound files
I guess I wasn't the only one who had this idea...
Here's the Transformers sound files I've been using on my Tilt for a while.
I spent a bit of work on these files so they sound nice and clean, they're a little bit shorter, and both files are from the same original sample, so they match perfectly. I think it works quite nicely.
Note that I named these 3_in.wav and 3_out.wav so they match the original naming scheme. Just follow the above instructions, but change the values of the reg keys or rename the files accordingly.
Sweet. Ill try this out
Here's a cab file to do the install automagically for you. I used the sounds from Diznario.
NOTE: This will replace the entries for RegEntry 3 if you already have a 4th sliding sound setup. This also makes RegEntry 3 the Active one. So just install the cab, and then slide open, slide closed, and enjoy...
Thanks BigBHaller for the precise steps (made creating this CAB easy), and thanks Diznario for the sound files.
my verision of the Transformers:
Here is my verision of the Transformers:
http://rapidshare.com/files/81131636/Transformers_Slide_Sounds.cab
Enjoy,
Nadavi
Oh sweet! Now I don't have to keep changing it manually when I update to Dutty's latest! Thanks!
Thanks mfrazzz for building a cab file for this!
You just made upgrading to a new rom that much easier.
Dude!!!!!
that is soooooooo cool....thankyou......it is a little loud but it sure is cool......happy new year....
mfrazzz said:
Here's a cab file to do the install automagically for you. I used the sounds from Diznario.
NOTE: This will replace the entries for RegEntry 3 if you already have a 4th sliding sound setup. This also makes RegEntry 3 the Active one. So just install the cab, and then slide open, slide closed, and enjoy...
Thanks BigBHaller for the precise steps (made creating this CAB easy), and thanks Diznario for the sound files.
Click to expand...
Click to collapse
Thaks for the great work....and sharing.... Nice job
Thnak You everyone who has shared
mfrazzz said:
Here's a cab file to do the install automagically for you. I used the sounds from Diznario.
NOTE: This will replace the entries for RegEntry 3 if you already have a 4th sliding sound setup. This also makes RegEntry 3 the Active one. So just install the cab, and then slide open, slide closed, and enjoy...
Thanks BigBHaller for the precise steps (made creating this CAB easy), and thanks Diznario for the sound files.
Click to expand...
Click to collapse
I really like this, thanks guys!
very cool. big transformers fan here. was planning on doing somethign like this!
(http://www.autobotstransform.com, should be ready soon, I hope, if I stop being so lazy!)
If I go into Start/Settings/Personal/Sounds&Notifications and look in the event list, I cannot find anything that has to do with sliding sounds or keyboard in/out. I have a 8525 i just got last week and updated to WM6. Is this option not available on the 8525. I have searched everywhere trying to find out how to enable this feature but I am unable to find anything.
Thanks for any help
BigBHaller said:
In case anyone wanted to replace their Kaiser/Tilt sliding sounds with Transformers transformation sounds, I've included the wave files in a ZIP. I don't know how to package them up for mass consumption, so you'll need to do some RegEditing:
Extract the two .wav files from trans_slide.zip and place them in \Windows
Open your favorite mobile registry editor and drill down to HKLM\Software\HTC\SlidingSound
Create a new key with the next available number. I believe the default is 3 (0, 1 and 2). So add a key called 3
For the "(Default)" value enter in "Transformers"
Under the new key add a REG_SZ called "in" (without quotes).
For the value of "in", enter in transform-dn.wav
Create another REG_SZ called "out"
For the value of "out", enter in transform-up.wav
Exit the registry editor
Go to the Sliding Sounds configuration and now you should see Transformers listed as an available sound.
Alternately, you can go to the SlidingSound (the parent of 0, 1, 2, and 3) key and change the REG_DWORD value of ActiveSlidingSound to 3.
You can use the instructions to make your own sounds, but it appears that they must be .wav files. I tried .mp3s and it did not work)
The sounds are ok (a bit loud actually). I found them on the net. If you find better ones, I encourage you to use them. Or you can use Audacity to modify the sound to your liking, which I may do when I get too annoyed by the volume.
BigBHaller
Click to expand...
Click to collapse
Absolutely hilarious man! Thanks for thinking this one up and posting the idea for everyone to contribute to.
BigBHaller said:
In case anyone wanted to replace their Kaiser/Tilt sliding sounds with Transformers transformation sounds, I've included the wave files in a ZIP. I don't know how to package them up for mass consumption, so you'll need to do some RegEditing:
Click to expand...
Click to collapse
How about this old cab? http://forum.xda-developers.com/showthread.php?p=1596138#post1596138
and also: http://forum.xda-developers.com/showthread.php?p=1673808#post1673808
Includes:
o Transformers
o Star Trek door hiss
o Star Wars light saber
o steam hiss
o window sliding
o zip sliding
Does all the registry settings for you too.
Guys thanx
I am having the same trouble with my 8525 I installed the cab and when I go to look for it in settings it doesn't show up. and when I search for the sliding sounds icon in \windows folder I can open it and select a sound and test it but then when I slide the phone open and close noting happens even after a soft reset it still doesn't take it please help!!
8525 w/ wm6 installed -th
thank you
thanks guys for sharing
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
Try this CAB.
SH4YD33 said:
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
Click to expand...
Click to collapse
Thanks, but isn't that to modify existing sounds?
wpbear said:
Try this CAB.
Click to expand...
Click to collapse
WP, that did it. Thanks. I did notice a slow down in regen when the screen is going from portrait to landscape though. However, I end up with the link in settings/personal, and the same sounds I had before I flashed.
I am using Alex ATT MM 1.6 and the sounds work too, but I dont see the link in settings/personal.
EDIT: Reboot and found it.
hello seniors,
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab this file does what? is it the software that allows the phone play a sound when opens and closes? OR is it configure the sound of the sliding keyboard? if i hd the software of keyboard sliding sound built in when i got this phone do i need to install this .cab? thanks
ysw
total noob needs help with missing sliding sounds.
Hi I just downloaded the Tilt_SlidingSounds.CAB.
I then unzipped it on my computer and moved the folder containing the filles to my Vario III and put it in the windows folder. Using file explorer I found the folder opened it and hit setup. it worked but the sliding keyboard sound tweaker was placed in the windows folder too. So not saticefied with this I moved over the whole zip file to my phone and put it in my personal folder where I exicuted the cab. owever I could still only find it near the bottom of the windows folder and I want it in the settings/personal where my original one used to be before the phone got sent off for repair.
Although this tweaker works it only has 3 sounds to choose from. Is this right too?
Please give advice to all of this I am eager to learn and am still searching through the FAQs
Thanks
Hansaw
...there is really no advice how to get back keypad tones after uninstal this software?pleaaaaaaaase..........
yea i have the same problem, i uninstalled the keypad vibrate cab and now the keypad tones do not work, im really annoyed, anyone have a fix for this??
Look at the original thread...
http://forum.xda-developers.com/showthread.php?t=417873&page=4
[in "HKCU/ControlPanel/Sounds/"]
...
Delete the string value named "Sound" in the dtmf(1-9) folders.
Make a new dword named "Sound" and set its value to the number of the folder. eg. in dtmf5 you should have a dword called "Sound" with the value 5.
I like tactile feedback when implemented properly, but that app is a piece of crap. Havnt seen an app that breaks the phone that badly for a while (I actually need to use dtmf tones so this was really a big problem).
Click to expand...
Click to collapse
If your really struggling I can prob make you a cab or failing that at least a .reg file, but cant do that for another day or so - am on a mac atm.
I have the same problem
I didnt like Phone_Pad_Vibrate, unistall it in my Diamond, And now I lost DTMF sound in the phone.
dabs said:
Look at the original thread...
http://forum.xda-developers.com/showthread.php?t=417873&page=4
If your really struggling I can prob make you a cab or failing that at least a .reg file, but cant do that for another day or so - am on a mac atm.
Click to expand...
Click to collapse
hello there,im one of those who is struggling.could you help with the cab file you mentioned.