Database Develop

Htc Breeze Test Sspl

So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.
EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled
attached spl in nbh format for flashing - breeimg.zip
Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze

at first try...
i have exactly what i descriped here:
http://forum.xda-developers.com/showpost.php?p=1253965&postcount=782
after the reboot i can't get into the bootloader...
what did you changed in the spl ?! or in the sspl.exe ??

I try... It's WORK!!!!!

what did you do??
edit:
ok, strange things goes on here ... just tryied it another time yet...
ipl-sspl by Des
SPL-1.01
should work
if i have time today i will try to made an cooked rom ...
if this works i look for a way to extract the files out of the excalibur wm6 rom ...
edit2:
i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...
i will try it now on a other machine..

1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)

THX
Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later

can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.

doedoe said:
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
Click to expand...
Click to collapse
Hi, i work on it!!
on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!
i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!
....
can anyone else can try mtty with the sspl ?
-----
engel98 said:
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
Click to expand...
Click to collapse
this should work when you have a new spl installed - and you want to flash another cid rom!!
has nothing to do with unsigned code!!
!!! only for understanding!!

hey what should i say...
it just look like that it works...
i have cooked a rom now...
only small reg changes!!
i have flashed it with hermes RUUUpdaterV2
only a OS file!
Phone boots! now i have to check if the changes are taken over!!
But why not ;Þ

Please post to the wiki.
I am hoping that we can use tornado WM6 code to cook a WM6 image...

I just added some Infos to wiki!!
Updated:
Breeze/MTeoR Upgrading Guide (4Hard/S-SPL)
Custom RUU Updater

I can also confirm that this SSPL truly works, but I am still unable to flash 1.38 radio over 1.29 currently installed with this SSPL version.
Any hints when could we expect SSPL based on some newer SPL release (like 1.09 or 1.10)?

just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...

futureshock said:
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
Click to expand...
Click to collapse
Tried that 3 times already. Doesn't work! Although process finishes whithout any glitches, System Info still says Radio ROM 1.29.00, and my phone still acts like crap...

.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!

I confirm this is also work on my dopod 595.
Now I need to search how to change the splash screen

what would you want to change??

futureshock said:
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
Click to expand...
Click to collapse
This is what I did/have...
- I have installed Radio ROM 1.29.00.10 (with older 1.32.251.1 RUU)
- My MTeoR is CIDed QTEK_A07 - all available RUUs fail with INVALID VENDOR ID error
- If I use SSPL (linked in this thread), my MTeoR actually does start SuperCIDed and I can run any RUU or custom ROM, and although all of them complete with success Radio ROM DOES NOT CHANGE at all.
My theory is (based on posts in Hermes upgrading forum) that Radio ROM 1.29 installed Radio BL 0108 which in turn does not allow flashing Radio ROM when started SPL is pre-1.09 codebase. I presume that it flashes with 1.09, 1.10 or newer only (makes sense because HTC released new 1.34 RUU which first installs SPL 1.09, then the rest of ROM).
Can anyone concur with my assessment or am I completely wrong?

Ohhh,thank.It works perfectly on my HTC MTEOR from O2 Czech Republic.

sp3dev said:
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
SSPL V1 works successfully
CID check - disabled
NBH check - disabled
Click to expand...
Click to collapse
WOW
I have now read for weeks the Hermes/Trinity threads wondering if this would be possible for "simple" smartphones too - and you did it
So while it is possible for the MTeor, maybe your kind of patching the SPL would also work for the Excalibur/S620?
I would love to flash my O2 Cosmo, but want to have an original ROM Backup for warranty/fallback reasons.
I also found out that it is possible to extract and cook ROMs for it like the way for the Hermes - but I cannot flash because of this f****g need for signed .nbh.
May be you are able to do this MAGIC on a Excalibur SPL too?
I would try out on my phone if you want to take the challange - if it doesn't work I think I'll have to get a MTeor
Anyway - lots of thanks for your work - and giving me back my hope on smartphone ROMcooking

Please HELP. SPL 1.09 and stuck

hi guys,
i was excited about the new Radio upgrade, so i tried to flash it. i got an error, because my SPL is 2.05. so i tried to unlock the phone using jerpelea's guide, flash to 1.09 -->success, then WWE (1.10) but an error occured saying invalid vendor ID during WWE flash. now i have SPL 1.09 on my phone and my phone is stuck on the 2nd boot screen of jerpelea's WM6.1 beta 4 ROM. my phone is fully unlocked using jerpelea's unlock guide, that's how i got to install SPL 1.09 successfully. how can i recover my phone? please help.
Update 1: i tried to flash back the original dopod 595 WM5 ROM. i mixed the RUU updater from the latest official ROM with the nbh from dopod WM5 ROM. the flashing works. when it's 100%, the phone reboots and, i got back to the same problem. stuck at 2nd/3rd boot screen. i now have IPL-0.90 and SPL 1.09 on my phone. Please help me to recover my phone. i've tried to hard SPL shown in the wiki guide, doesnt work. says invalid vendor ID crap. i really dont know what to do now.
Update 2: when the device boots, it stucks on the 2nd/3rd boot screen and if the USB cable is attached, for a brief moment, windows can detect the phone and i can even browse the content of the phone from my PC. but after that, the device disconnects itself and just remain stuck at the 2nd/3rd boot screen. the device appears to be totally freezed/hang. even the LED charging indicator will not turn off when i unplug the device from computer
i believe what i need to do now is to make a nbh image that is signed to i dont get any corrupted image message when trying to flash. i used HTC ROM editor to mix and match the SPL and IPL file so that i can downgrade the SPL to 2.05 and upgrade it again later. but i dont know how to sign nbh files.

If i were you I'd use this one =)
futureshock said:
ok i found it i didn't read further the 1st page on sspl thread
edit:
have repacked it with runme.bat and 77.7er SSPL ...
Radinly_1.54.30.10
Click to expand...
Click to collapse
At least I did and it worked =)
and then I'll highly recommend this WIM6.1 release by FutureShock: http://forum.xda-developers.com/showthread.php?p=2094056#post2094056
GL =)

I've GOT IT!!! using various mix and match method, im flashing the phone now!!! fingers crossed it'll boot later
UPDATE: DOESNT WORK! PLEASE HELP

It sure will.. Even I got it to work really fine

crap!. doesnt work. it's still SPL 1.09 and stuck at 2nd boot screen.
is there a ROM editor that works for meteor? can someone please suggest one that can be used to sign the nbh file.
jerpelea, or futureshock, please help

not good news
I think I know what do you mean. My device was in very same state like yours few mnonths ago.
Try to run mtty and the command "info 2" without quotes.
Do not forget to disable USB on activesync settings before running mtty.
You will get an answer which includes the CID of your device.
If not (this was my case), you have to send it to the repair center probably.
My device CID was Qtek_A07 (RUS) and I have tried to instal the first official WWE 1.34 ROM update (combined from SPL.nbh and ROM.nbh) and it replaced only the SPL, and the ROM update crashed.
There was not way out so I sent it to the repair center.
The WWE images are expecting the device with CID Qtek_Z12.

PiGeonCZ said:
I think I know what do you mean. My device was in very same state like yours few mnonths ago.
Try to run mtty and the command "info 2" without quotes.
Do not forget to disable USB on activesync settings before running mtty.
You will get an answer which includes the CID of your device.
If not (this was my case), you have to send it to the repair center probably.
My device CID was Qtek_A07 (RUS) and I have tried to instal the first official WWE 1.34 ROM update (combined from SPL.nbh and ROM.nbh) and it replaced only the SPL, and the ROM update crashed.
There was not way out so I sent it to the repair center.
The WWE images are expecting the device with CID Qtek_Z12.
Click to expand...
Click to collapse
this is what i get with mtty
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
what's the meaning of this? is there any hope?
i ran the format command anyway. device reboots and still stuck at the windows mobile logo screen. what should i do next?

alexnvidia said:
this is what i get with mtty
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
what's the meaning of this? is there any hope?
i ran the format command anyway. device reboots and still stuck at the windows mobile logo screen. what should i do next?
Click to expand...
Click to collapse
why did you format ?
try to reflash 1.09 spl
and after this wwe one of 1.34 roms to get 1.10 spl

If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
but i dont know if you have the knowledge

jerpelea said:
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
Click to expand...
Click to collapse
jerpelea: First of all I will say thank you for taking all that time you do spend on the ROM cooking/building/making/what-ever-is-the-right-name and I/we really appreciate it!
jerpelea said:
but i dont know if you have the knowledge
Click to expand...
Click to collapse
I think that comment was really unnecessary!
As a n00b I know how hard it is to understand what’s happening. I did read the wiki’s and still I didn’t get HOW TO upgrade a ROM until I found a great post in FutureShock’s thread
darkDirk said:
First of all:
It's fantastic what you are doing with wm6.1 and the Breeze, Futureshock !
I am new and trying to upgrade it myself, but at first I didn't have any luck.
Here is a simple newby step-by-step manual:
- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if Activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow its directions.
When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.
If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe on your PC with Activesync working and then install SP_AllowCertificateInstall.cab on the Mteor.
You will find those two in the .rar in ".\opt Software\Unlock Tools"
Then redo from the start.
Then, Have fun !! (Futureshock & DarkDirk)
P.S. works on a BREE100 with IPL-0.90 and SPL-2.05.
Click to expand...
Click to collapse
But I still do not know what SSPL, SPL, IPL or whatever there is does to me or/and the phone.
Anyway. Thanks for all the work.

if someone has a corrupt CID just send me an pm...

jerpelea said:
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
but i dont know if you have the knowledge
Click to expand...
Click to collapse
with all the respect what you do for this community, isn't taht you who advice us to update the SPL before trying your images?
in this thread http://forum.xda-developers.com/showthread.php?t=384398 you should probably higlight that the update should be done only on WWE devices.

jerpelea said:
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
but i dont know if you have the knowledge
Click to expand...
Click to collapse
i did try to read as much as i could but apparently i didnt come across that. when i flashed to SPL 1.09, the device booted up just fine. it is when i try to update to WWE 1.10, the update process failed and bricked my phone. for your information, i was following the exact steps described by you in your unlocking/SSPL guide. you mentioned upgrade to SPL 1.09, then WWE 1.10. this is exactly what i did. i dont know what went wrong. im sure if im as knowlegable as you are, i wouldnt have screwed up my phone. my bad.
just to be fair, your method did work when i updated my dopod 595 (WWE device) to your WM6.1 beta 4 ROM. but i never upgraded my SPL to 1.10. i only thought of upgrading SPL when you posted the new radio release and that's where i screwed up.
anyway, what is important here is, is my phone unrecoverable? im reading the links you posted as i type, and i'll give the methods. maybe based on your experience, you could suggest some ways to do it. thanks.

alexnvidia said:
hi guys,
i was excited about the new Radio upgrade, so i tried to flash it. i got an error, because my SPL is 2.05. so i tried to unlock the phone using jerpelea's guide, flash to 1.09 -->success, then WWE (1.10) but an error occured saying invalid vendor ID during WWE flash. now i have SPL 1.09 on my phone and my phone is stuck on the 2nd boot screen of jerpelea's WM6.1 beta 4 ROM. my phone is fully unlocked using jerpelea's unlock guide, that's how i got to install SPL 1.09 successfully. how can i recover my phone? please help.
Update 1: i tried to flash back the original dopod 595 WM5 ROM. i mixed the RUU updater from the latest official ROM with the nbh from dopod WM5 ROM. the flashing works. when it's 100%, the phone reboots and, i got back to the same problem. stuck at 2nd/3rd boot screen. i now have IPL-0.90 and SPL 1.09 on my phone. Please help me to recover my phone. i've tried to hard SPL shown in the wiki guide, doesnt work. says invalid vendor ID crap. i really dont know what to do now.
Update 2: when the device boots, it stucks on the 2nd/3rd boot screen and if the USB cable is attached, for a brief moment, windows can detect the phone and i can even browse the content of the phone from my PC. but after that, the device disconnects itself and just remain stuck at the 2nd/3rd boot screen. the device appears to be totally freezed/hang. even the LED charging indicator will not turn off when i unplug the device from computer
i believe what i need to do now is to make a nbh image that is signed to i dont get any corrupted image message when trying to flash. i used HTC ROM editor to mix and match the SPL and IPL file so that i can downgrade the SPL to 2.05 and upgrade it again later. but i dont know how to sign nbh files.
Click to expand...
Click to collapse
run terratem
type info2
if it sais A07 then just flash rusian 1.34 rom and enerithing will be fine
application unlock it
run sspl 77.7
flash wm6.1
if it says enithing else you need to locate your original rom
till now i found that it sais a07 in most cases
BR

alexnvidia said:
i did try to read as much as i could but apparently i didnt come across that. when i flashed to SPL 1.09, the device booted up just fine. it is when i try to update to WWE 1.10, the update process failed and bricked my phone. for your information, i was following the exact steps described by you in your unlocking/SSPL guide. you mentioned upgrade to SPL 1.09, then WWE 1.10. this is exactly what i did. i dont know what went wrong. im sure if im as knowlegable as you are, i wouldnt have screwed up my phone. my bad.
just to be fair, your method did work when i updated my dopod 595 (WWE device) to your WM6.1 beta 4 ROM. but i never upgraded my SPL to 1.10. i only thought of upgrading SPL when you posted the new radio release and that's where i screwed up.
anyway, what is important here is, is my phone unrecoverable? im reading the links you posted as i type, and i'll give the methods. maybe based on your experience, you could suggest some ways to do it. thanks.
Click to expand...
Click to collapse
it depends on the info displayed on terraterm
for A07 you can use the russian rom to recover

this is what i got from terraterm. same as mtty.
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
i did flashed back to my original ROM after the first stuck in WM screen incident. and amazingly the flashing process works after several mix and match. after the original (WM5) ROM completed flashing, my IPL is downgraded back to 0.9 and SPL is still 1.09, and im still stuck at the WM logo screen (this time WM5 logo).

terraterm is a tool like mtty
what is your orignal rom??
just try to flash over sdcard... (look in wiki4more infos about that)

futureshock said:
terraterm is a tool like mtty
what is your orignal rom??
just try to flash over sdcard... (look in wiki4more infos about that)
Click to expand...
Click to collapse
i tried SD card flashing too yesterday. it says not allowed. i have already flashed over the original dopod 595 ROM and my phone is now WM5. the flashing is 100% successful, but it is still stuck at the second boot WM screen.
i think im in a really screw up position now. i have SPL 1.09 and IPL 0.9. i dont know what is corrupted now. is it the CID? SPL?

cid you can check with mtty and info 2...
if that so... just do what i have wroted in pm...
you could also just try the old htc rom (w. SPL 2.05)

futureshock said:
cid you can check with mtty and info 2...
if that so... just do what i have wroted in pm...
you could also just try the old htc rom (w. SPL 2.05)
Click to expand...
Click to collapse
both mtty and terraterm give me the same msg when i type info 2. it says time out (refer above for exact error message).
the original dopod 595 rom has SPL2.05. and it was successfully flashed into the phone. when the phone reboots, it is still stuck at 2nd boot screen (WM logo). i checked, the SPL is still 1.09, but IPL has been downgraded to 0.9.

How to fix a bad radio flash ? "no gsm" on boot

Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?

update
after the boot, i've got a "no gsm" message near the radio version

other people got the same problem like me ...
God oli, help me please

I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL

Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.

You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !

doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff

I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.

i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.

Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!

nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards

Flash HSPL, then issue task 2A command from mtty. Flash full ROM.

Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.

stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?

thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....

hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone

Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )

hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it

hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.

macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me

htc m700 help me

--------------------------------------------------------------------------------
Hi everyone
I failed to upgrade my Trinity Radio or to WM 6 also at the same time i cannot install any hard Spl
i get an error 270 or 260
i tried soft reset first.
but nothing seems to work
ROM version : 1.23.405.2
Rom date : 3/11/2007
Radio Version : 1.38.00.11
the bootloader menu shows the following:
TRIN100
IPL-0.5
TRIN100
SPL-1.07.0000
update1: when i try flashing it get 1% and stop and it goes back to the tri color screen with no change in the spl version.
Thanks

Best way to upgrade is to put your device manually in bootloader :
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Then install hard SPL (personnaly i prefer Des' Crash-Proof SPL)
And after you will be able to install a Rom Wm6.1 of your choice !
To flash your device, prefer to put your device manually in bootloader...you will have less error message !
Hope this will help

hi try it but get error 270 all the time.

image is corrupted.
you should try to re-download the ROM you are trying to flash. If you still receive this error, refer to this thread . You basically have 2 options: 1) run SSPL manually from your phone, then run the RUU from the computer to flash the ROM or SPL you want.. or 2) flash using SD card flash method
http://trinityguides.info/index.php?option=com_content&task=view&id=43&Itemid=67

Please take a look here:http://www.trinityguides.info/index.php
Bye

hi how can i charge the battery?

hi how can you charge the battery as i can only get the phone in boot only ????????? help me as i need the phone back on as i need tomtom.
thank you

Thank you all
Hi like to say thank you all for your help,
got the phone working now:d

Good to know. Thx for giving feed back. Enjoy your device then ...

I have a big problem. My SPV m700 was unlocked and working. I tried to change the rom and at 75 % I got an error. When I started the phone the scrren was blank. I have hard reset it. My spl version is 1.7.000 or something. I thinik is the original one. I wasen't able to put any other spl version. I get stuck at 1 %. The first time I have managed to change the spl was when the phone was working. Now is a brick. I still can enter in the tricolor screen. Is there any hope? Can someone help me? Thx a lot

HTC Trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/20284524...12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
http://rapidshare.com/files/203126613/1.56.70.11.exe

Error 626 when hard spl

I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.

go to olinex hard spl section and write about your problem maby they can help u

Onlinex hard spl section?
I must be blind. Where is that?

matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here

matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.

Tried both checked and unchecked and dont work

I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS

Great!!! I will remember that one too.