Database Develop

[UPDATED 28-04-2009] TorchButton v1.5, using camera LED for flashlight

TorchButton v2.x supports the Leo as well as Raphael and moved to a new thread! Click this link!
On my previous devices (Wizard, Hermes) I found it very useful to have the camera LED function as flashlight. However, all those tools that were previously available to enable the LED didn't seem to work on the Raphael.
I've just spent some time debugging and testing and got it to work on my Raphael. The cab to install is attached to this post. It'll create a shortcut in your programs menu.
Usage is currently twofold. When you start the app, the flashlight turns on. When you don't do anything for 60 secs it will turn off automatically to prevent your led from burning (heard it happen before on other devices). If you start the program again within the 60 seconds, it will manually turn the flashlight off.
I've only tested this on my Raphael so far. Please let me know if it works for everyone.
---------------
Supported modes:
TorchButton has 5 modes so far. Each one explained in short:
Normal
Simply enable the flashlight until the application is started again or the configurable timeout occurs (60 seconds by default). This mode can be used for a prolonged period. I have only tested it up to 5 minutes though.
Bright
The Bright mode is exactly the same as the Normal mode, with the only difference being that the LED is more bright. This mode is equal to the short moment when you make a photo with flashlight on. Note that this mode does stress the LED and should not be used for prolonged periods. I have used this up to a minute without problems.
Blink
The Blink mode turns the LED on and off in specific intervals that you can configure in the registry. An example of usage is the bike light.
SOS
This is extensive mode that supports sending custom morse code. The text to be sent via morse code signals can be configured in the registry. This defaults to "sos ", thus the SOS name for this mode. NOTE that the flashlight timeout does NOT interrupt a text. It checks if the timeout occurred when it starts over again and quits when it reached the timeout.
PTT
The Push-To-Torch mode. When your device has a key you can map to 'hold', you can use this feature to keep the light on as long as the key is pressed. The AT&T Fuze is one of those devices with a PTT button.
---------------
UPDATE 01-09-2008 v1.1:
TorchButton v1.1 now includes the ability to override the default timeout from 30 seconds to anywhere between 0 and 300 (= 5 minutes) seconds. The regkey is HKLM\Software\TorchButton\FlashlightTimeout (DWORD). When the application installs or when it starts for the first time it will create the registry setting if it doesn't exist yet.
UPDATE 09-11-2008 v1.2:
Finally a new version of TorchButton.
* Enlarged maximum timeout override from 300 seconds to 86400 seconds (a day).
* Added 'bright' feature. Note that the light may flicker almost unnoticeable every 750ms. Can't prevent that.
* For Devs: attached source code of TorchButton to this post.
* For Devs: I've created a C# library for easy control of the camera led. Also attached to this post. The .zip contains a readme which has examples on how to use it.
UPDATE 14-11-2008 v1.3:
* Added 'blink' feature. Registry configuration options:
- blinkTimeOnInMs (DWORD), default 500. Configures the time the LED is on.
- blinkTimeOffInMs (DWORD), default 500. Configures the time the LED is off.
* Added 'SOS' feature. More like a 'morse code' feature though. You can set any morse code to be signalled in the registry. Options:
- sosCode (SZ), default " ...---...". Configures the morse code to signal.
- sosDotTimeoutInMs (DWORD), default 200. Configures 200ms LED on, and 200ms LED off for ".".
- sosDashTimeoutInMs (DWORD), default 400. Configures 400ms LED on, and 400ms LED off for "-".
- sosSpaceTimeoutInMs (DWORD), default 1000. Configures 1000ms pause when processing space " ".
* New shortcuts are added for those features.
* Shortcuts are moved to a TorchButton folder within the Programs, for grouping purposes (in case you're wondering where TorchButton went!).
UPDATE 29-11-2008 v1.4:
* Fixed 'sos' mode. It now properly uses a single configurable unit time to calculateother intervals.
* Updated 'sos' mode. You can now configure a text to be sent via morse code in the registry. Check configuration part of the readme for more info.
* Removed old 'sos' registry settings and replaced them with new ones.
- Check out the new configuration settings in the readme.txt (attached to this post).
* Increased default flashlight timeout from 30 to 60 seconds.
* Changed default 'blink' time to 250ms for both on and off.
UPDATE 28-04-2009 v1.5:
* Added Push-To-Torch (PTT) mode. Probably only useful for devices that have the PTT button, such as the AT&T Fuze.
* Added brightResetTimeInMs registry setting for owners of the Alltel Touch Pro. They need to set this value to 100 for bright mode to work properly.
---------------
TODO's:
* Change LCD brightness to minimum when application starts, and restore when exists.
* Prevent standby mode while active
---------------
Developers:
The source code has been attached as well. The app has been written in C/CPP using VS2008. The code doesn't deserve a beauty-price, but it does its job. The 'TorchButtonBright' project is just a wrapper that calls TorchButton.exe with the /bright parameter. This is a workaround to be able to deploy two shortcuts with different icons and a parameter. If anyone decides to use this code, please rename the project. I've also written a C# library that allows easy access to the normal and bright flashlight modes. Attached as well.
---------------
TorchButton v2.x supports the Leo as well as Raphael and moved to a new thread! Click this link!

Works beautifully with stock HTC ROM provided with Raphael released in Europe. One small request: can you provide also an option to change the timeout? For starters - in registry. Some people would like it to work only for 10s, others: for 60s. Others might have the fun of burning it out [anyway you can limit it to max 2 minutes just to protect those less-aware.]

Tnx
Tnx for your effort. It works great.

Works like a charm! Thnx!
I second the request for a change in time out. I need to make it from the front door to my bed without waking my gf, and i don't make it in 30 seconds

works great! Nice job! This will become a standard application on all custom roms

)
Thank you NetRipper. This is a 5 Star utility!!!

HALLELUJAH !
thank you a million times !
make that trillion

Thanks for all the great responses and I'm glad it works for everyone. I'll add that feature to change the hardcoded 30 seconds timeout tomorrow or the day after.

the flashlight has a normal condition and a very bright condition. would it be possible to make a dimmer on the flashlight so that for example one can attach it to the volume buttons on the side ?

Thank you . I have it as part of favourite programs in TF3D . Works great.

da_jojo said:
the flashlight has a normal condition and a very bright condition. would it be possible to make a dimmer on the flashlight so that for example one can attach it to the volume buttons on the side ?
Click to expand...
Click to collapse
The flash indeed has two modes. However, the very bright mode is automatically disabled after 1 or 2 seconds by the camera driver. It's possible to make it sleep for that amount of time and re-set the bright mode, but I can't imagine it being very good for the LED to burn for a longer period of time at that mode. It would also flicker every 1 or 2 seconds.
I think the normal LED is bright enough, so unless the demand for the extra bright setting is overwhelming, I'll keep it like this.

mm that sucks.
its not a great idea to have a flashing flashlight unless one wants to drive anyone crazy or likes discolights ... maybe an idea lol... a stroboscope.. or some sort of signaling light..
it wouldnt hurt to have the LED on for a longer period. since the lifespan is over 50000 hours and it is running on lower power then intended .. only thing, is that it takes toll on the battery. i wouldnt care to much for the LED as it will last longer then the phone's display.

Looks good to me, but you could always play on words and rename it TorchPro. :-D

yesterday I wrote for myself something just like yours. but i prefered fullscreen button which would change color to black while LED switches on (useful in dark places - eyes are not blinded by bright screen).
it is possible to change timeout (setting written in registry) using track bar or up-down, left-right keys.
enter key switches LED on and off. just like big on screeen button.
have fun.

Great stuff, works really well.

steveoidm said:
Great stuff, works really well.
Click to expand...
Click to collapse
+1
Just what i was looking for,
Nadavi

Thank you guys. You,re perfect. I was very sad,when I found out,that VJCandela doesn't work.

new feature request.
Using the Gsensor let it keep the led on as long as the device senses motion, put it down and it turns the led of in 10 seconds.
Doable?
Thanks
Jules

Now thats an excellent suggestion.
Are we 100% sure that leaving the LED on for prolonged periods at the low level is not going to have any adverse effect on it.

Any chance of a version for the LG KS20 ?

New Version Of Locale

You'll be happy to hear that we've just released Locale 0.3 beta this week. To install the update, simply:
1. Open the Android Market
2. Search for Locale
3. Tap on Locale
4. Tap on Install
The update resolves the PM-AM time boundary problem you ran into, as well as these other changes:
New Features
- Time Condition now supports day of week
- Network Setting now supports GPS
- Battery Condition now supports plugged-in and unplugged
- Contact Condition now supports accelerated scrolling
- Calendar Condition displays which calendar each event comes from
- Location Condition supports easier renaming and deletion of locations
- More thorough in-application help
Bug Fixes and Enhancements
- Better location detection
- Calendar Condition and Time Condition now detect changes immediately (previously it could take up to 10 minutes)
- Fixed a bug with Time Conditions spanning across the PM-AM boundary
- Fixed a bug where large locations couldn't be edited. Zoom controls now display even if a location fills the screen
- Notifications dismiss when leaving a situation

cool.
love the apps, keep them coming.
....cannot wait for cooking to start, but I think im not the only one...lol

just wondering.."Network Setting now supports GPS" means its posible to use locale features using gps only, without 3g location gethering?

Can anybode send me a link to the .apk oh this app for use on my HTC Tattoo, please?
THANK YOU

This is in the wrong forum; reported.

Updated [16/11]: [App] [G-Sensor] [Brand New] The XSense v1.0

Credits:
Foremost, let us all acknowledge Koushik for his brilliant "Sensors" library upon which most if not all non-HTC apps that use the G-Sensor, Light-Sensor, and Navi-Sensor are built, simply ingenious. Moreover, I would like to recognize No2chem for the NeuLed2 library which is an equally exquisite peace of code that allows access to the Diamond/Pro Leds. Without those two guys, accessing these advance interfaces on the diamond/pro would be inapproachable at best.
Reason: Since I bought my Diamond, I constantly thought HTC gave it a lot of sensors but nearly no .."Sense".
......... X-Sense ...........
* Hopefully, an innovaton & integration of RANDOM but needful features...
Features:
1. Courtesy Settings:
- Select Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down (duh!).
- Automatically activate/deactivate the Speakerphone during phone calls depending on the phone's posture. In other words, if you're not holding the phone up then it will automatically activate the Speakerphone.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it at customizable intervals: Missed Call(s), Voice Mail, and SMS only.
3. Stylus-Sense:- When the Stylus is in/out: Will play faint sound + Blink the Back button's light +/Vibrate. Moreover, the device will vibrate whenever you move it at customizable intervals.
- When the Stylus is out and the device is moved: Device will vibrate twice on every posture change + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes ON until the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this.
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: Your phone will suspend if you hold it up-side-down (duh!)
- Light Navi Button When Suspended: Will do just that. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
6. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
Logic:
- During phone calls, All features are suspended except the Speakerphone-specific code.
- Program will respond to posture changes only 2 seconds after they have occured, this is to
avoid unintended operation ( as much as possible ).
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and enjoy the merits of your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
Requirements:
.NET 3.5 + Diamond or Raphael.
Restrictions:
Only for the Diamond/Raphael (vis-a-vis, it will crash on any other device!)
Bugs/Limitations:
Knock yourself out...
Disclaimer:
This program is provided strictly on "as is" basis. It is intended only as a proof-of-concept. Although fully functional, it must NOT be considered for daily use. This software is very likely to compromise the integrity of your data as well as invariabley cause your device to malfunction in any way, shape, or form. Therefore, the developer shall be absolved of all responsibility towards testers and/or their computers & devices. While using this software you agree to be solely liable for all and any damages you do to yourself, your device, or any damn thing you possess and care for!
Release Notes:
- Download & Install the CAB
- Run the XSense from your Start Menu\Programs, customize to taste, and enjoy!
- IF you want it, download it from the Diamond section.
NOTE: Further releases/upgrades will NOT work on the Raphael/Diamond PRO.

wheres the cab?

Cab?!?
This program sounds sweet.. Im willing to give it a go, but no cab.

This is like the april fool joke for the wireless charging app. It's a joke, the app is too good to be true
/Closed

klasital said:
This is like the april fool joke for the wireless charging app. It's a joke, the app is too good to be true
/Closed
Click to expand...
Click to collapse
I fell for that too man, it was NOT funny tho! Its October btw..

shirreer said:
I fell for that too man, it was NOT funny tho! Its October btw..
Click to expand...
Click to collapse
And you still haven't posted the app...
Roger

96cobra said:
And you still haven't posted the app...
Roger
Click to expand...
Click to collapse
Released: On first post.

Release: available on the first post. Tell me what you all think (compliments/complaints)...

shirreer said:
Release: available on the first post. Tell me what you all think (compliments/complaints)...
Click to expand...
Click to collapse
can i have your permission to review this app on a video? i have a youtube dedicated to the FUZE but also other stuff
looks promising and nice

Nice but . . .
OK first off I love this program it works very smoothly, except for one thing, and I am sure this is a simple fix. I unzipped and copied everything to the root folder of my device. Started the application and it starts working, very cleanly I might ad. However the stylus function isn't working for me. I am sure it just has to do with the file of the wav, should I put these in any specific folder?

XERO_Racer said:
can i have your permission to review this app on a video? i have a youtube dedicated to the FUZE but also other stuff
looks promising and nice
Click to expand...
Click to collapse
Go right on man, and thanks for the "cheer up". Enjoy

jewill00 said:
OK first off I love this program it works very smoothly, except for one thing, and I am sure this is a simple fix. I unzipped and copied everything to the root folder of my device. Started the application and it starts working, very cleanly I might ad. However the stylus function isn't working for me. I am sure it just has to do with the file of the wav, should I put these in any specific folder?
Click to expand...
Click to collapse
Tell me more:
- Did the stylus-out/in sound EVER play?
- Did you change the original wav files?
- Is the phone's system volume (not the Ringer) loud enough to be heard?
Notes:
- The wav files (in.wav and out.wav) are supposed to be in the same directory as the program.
- The original wav files are subtle, they are meant to merely "hint" at you.

Glad that this app really works. Maybe in the next release you could add some settings so we can customize it as we wish. The only small problem that I encountered is that the phone doesn't turn back to loud mode when I flip it unless I push the wake button to turn the screen on. This can be annoying sometimes because I missed a call this way...
Good job on this app. It's really subtle but useful at the same time.

bedobela said:
Glad that this app really works. Maybe in the next release you could add some settings so we can customize it as we wish. The only small problem that I encountered is that the phone doesn't turn back to loud mode when I flip it unless I push the wake button to turn the screen on. This can be annoying sometimes because I missed a call this way...
Good job on this app. It's really subtle but useful at the same time.
Click to expand...
Click to collapse
Thank you mate. I intend to create a settings screen altough that would be both cumbersome and useless for the current feature-set except for the stylus sounds.
I am thinking of adding a launcher to the stylus events, perhaps a new note would open on stylus-out, then save+close on stylus-in.. who knows, eh?
As for the missed call......LOL... I think that's just the point ...Seriously though, WM devices cannot survive the battery strain if they don't sleep (suspend). So, we do with what we got
Cheers

only issue i am having is.. I would prefer not to have the navi lights on all the time... whether the phone is face up or down my navi lights are always on

Short Review
ok soo far i tested the app and i have to say is this is a real good app, only problems im encountering is the vibration is very very faint, but i guess thats ur deal of conserve battery life? theres no problem to it and besides...speaking of battery life, leaving the NavLight on and messing around with the app for 5 mins straight didnt even take a percent off of my battery, ill try for a more deeper battery challenge but anyways, heres a list of suggestions, pros and cons, btw this app makes my TouchPro look 5000 times more cooler too something ive been wanting on this phone
PROS:
-Courtesy Sense seems to be very effective
-doesnt kill my battery much(yet)
-not a CPU Heavy app, still can run TP flawless
-Stylus Sense is responsive
-not a memory heavy app
CONS:
-Response of every "sense" is very slow, takes like 2 seconds to switch
-Courtesy Sense can sometimes be out of control, can possibly switch the volume off and on since i have my TP in my vertical case(but that can be fixable i guess)
-Cant close the app(if user decides to) but theres a way to close it through task manager(not HTC TM though)
-Backlights dont light up anymore if app is in use
-Cant unmute unless you switch the device on
Suggestions:
-Make a settings menu where u can adjust the poll speed and sensitivity and what Senses you can turn Off or On
-Should make the Stylus notification light blink every 15-30 seconds or 1 min at the most
-Also to add on the Notifications Sense is the famous blinking LED Light whenever you shake the device
-Close/Exit option onto the app
-When the device's volume is set on silent or vibrate, the Common Sense should be turned off until the device volume is set back to normal
-and probably something crazy, the Party Light Mode, where you can make the lights blink with noise or fade different paterns or blink with some random pattern just for FUN lol
Overall Score 9/10 and thats my honest opinion...this is a great app especially in Alpha stage
Video Review coming up this weekend, ill be posting a link soon, thnx for the great app

Video Review
here ya go everyone, a review video courtesy of me feel free to subscribe if you like
http://www.youtube.com/watch?v=Ds2Brq8L_dY

XERO_Racer said:
here ya go everyone, a review video courtesy of me feel free to subscribe if you like
http://www.youtube.com/watch?v=Ds2Brq8L_dY
Click to expand...
Click to collapse
Bro, let me thank you for a VERY groovy flick, I enjoyed every bit of both your written and video reviews.
I must praise you further for a great job at a thorough & constructive critique. Your stylish review and suggestions are valuable and are noted with all due enthusiasm. I will try my utmost to reflect what I can on my next attempt - the Beta. Also, I will contemplate creating this "feast of lights" you're craving as a token of gratitude for your effort
Cheers

Here's v1.0 ... fully customizable.

This seems to be unneeded around here, So... for the few who want it, y'all can download it from the Diamond Section - In the meantime, I'll be contemplating ways of making new versions unusable on the Raphael for the obvious unpopularity of this device, and equally evident lack of enthusiasm from those who have it
Cheers

[ROM][WWE][Jan 11, 2011][1.04] Slate/Stock-like - SYS 29007/Manila 2.5.20121225.0

Hello, people.
This is it - a WM 6.5.3 ROM which includes Manila 2.5.20121225.0 and the other HTC goodies you're used to.
The aim is to have a stock-like ROM, with most of the stuff gathered from Touch HD-class devices (ie. Rhodium/Topaz).
Changelog:
-----------------
Version history (only changes from the previous version are listed).
Version 1.04
--------------------------------------
SYS 29007/Manila 2.5.20121225.0
Fixed the 5 MP camera issues, also enabled the additional camera modes (sports, GPS, etc).​
Version 1.03
--------------------------------------
SYS 28244/Manila 2.5.20121225.0,
SYS 29005/Manila 2.5.20121225.0
Added:
Notification Enhancement v3.5.20113824.00
Bug fixes and new speed hacks - the pagepool stays at 32 MB, but more RAM is available than in the previous version (more modules, less files - some slack saved here).
RAM at clean, fresh boot is now 84 MB - after OOBE and initial customization please reboot your phone (OOBE eats some RAM).​
Version 1.02
--------------------------------------
First release, SYS 28244/Manila 2.5.20121225.0.
Base:
Rhodium_HTC_Europe_2.07.401.1.
Removed:
Notification Enhancement v3.5.20113824.00
Added from:
Huashan_HTCCN_CHS_CMCC_1.14.1403.0_0.97.332.9:
Phone Canvas Enhancement v5.0.61220182625.1
Video Telephony v3.0.39295.0
Power Off Warning v2.18.0.0
Menu Enhancement v1.1.20182727.00
HTC Lock Screen v2.0.20182027.00
CM Internet Sharing v1.2.D.0
Added from:
Topaz_S2_HTC_WWE_2.53.405.5:
FM_Radio_1_7_19181421_02
Additional changes:
GPS_GMM_4.1.0.44
Run CC v1.1.b.0
SensorSDK_4_0_19112326_0​User customization:
-----------------
I'm using RunCC and you can add your stuff to:
\\Storage Card\config_SD.txt
For additional information on RunCC, please check this:
http://forum.xda-developers.com/showthread.php?t=547372
Flashing:
-----------------
Remember, you need either HSPL or USPL for flashing, check this out:
http://forum.xda-developers.com/showthread.php?t=505377
Ideally, you should perform a task 29 (BINFS formatting) before flashing, more info here:
http://forum.xda-developers.com/showthread.php?t=540290
Or, as an alternative, flash any stock ROM before flashing this ROM.
No radio or SPL in this ROM image.
As always, you are doing this on your own:
Nor I, nor XDA Developers are responsible for anything that happens to your device.
If you have any doubt please check the forums and make sure you now what you are doing ..
Questions/bugs/fixes:
-----------------
Always an updated list in post #2 and post #3.
Download:
-----------------
Version 1.04:
29007 @ FileFactory:
http://www.filefactory.com/file/b4h3c2e/n/Slate-1.04-29007.zip​
Version 1.03:
28244 @ FileFactory:
http://www.filefactory.com/file/b4ad0eh/n/Slate-1.03-28244.zip
29005 @ FileFactory:
http://www.filefactory.com/file/b4eh869/n/Slate-1.03-29005.zip or (it seems the server hosting it has some issues)
http://www.filefactory.com/file/b4ad33e/n/Slate-1.03-29005.zip​
Version 1.02:
HotFile:
http://hotfile.com/dl/85860270/4666008/Slate-1.02-28244.zip.html​-------
The development will not be too aggressive here - probably only some SYS changes, as newer versions get leaked.
Thanks to all the great people, the entire community here for the tools/help/support I've received. If you feel like donating, please donate to XDA Developers ...
Have fun!
-------

FAQ
1. Do I need a hard reset after flashing this ?
Well, probably not - but still, it cannot hurt either ..​
2. My x/y/z stuff is not working. What should I do ?
Please report your findings in this thread and.. hopefully we'll manage to find a solution .
Either way, check any third party software you are installing - especially taskbar icons and Manila customizations - these have a habit of breaking things, as they are usually replacing system files with edited ones.​
3. What Manila tabs are included in this ROM ?
The standard Manila 2.5 tabs (no Footprints, E-reader or Facebook, sorry):
Home
People
Messages
Mail
Internet
Calendar
Stocks
Photos & Videos
Music
Weather
Twitter
Settings
4. What is the battery life on this ROM ?
It should be on par with the rest of the WM 6.5.x/Manila 2.5 ROMs, maybe slightly better (there are some minor tweaks, here-and-there, that might improve battery life).​
5. What is the pagepool for this ROM ?
The pagepool is set to 32 MB - I am considering releasing a version with the pagepool set to dynamic/default.​
6. I want the nice HTC volume control, I hate the ugly WM one!
Unfortunately there is no solution yet to integrate the HTC volume control into WM 6.5.3 builds - as soon as a solution is found, an update will be issued.​

Bugs/fixes
1. The new SMS notification is not working.
On a new received SMS there is no notification sound, even if it's enabled in the settings.
Status:
Fixed in version 1.03​2. Appointments are not showing on home screen.
Appointmens are not displayed on the home screen (I assume the original report refers to the Manila home tab).
Status:
Fixed in version 1.03​3. Wrong contact dialed when using Manila favorites tab.
When dialing from the Manila favorites tab, sometimes a different number is dialed.
Status:
Not confirmed - only 1 report on this, cannot be reproduced.​4. MSN Money/MSN Weather widgets are not working.
Status:
No Fix - these widgets come with the current SYS (28244), I assume that's something wrong with that - hopefully it will be solved in a new 28xxx branches leak.
Widgets removed from 29005/29007 builds.​5. The camera works only up to 3 megapixels.
Status:
Fixed in version 1.04​

Fixes/Cabs
Version 1.02/1.03:
------------------------------
5MP_Camera.cab
Fix for camera capturing only at 3 megapixels, it also enables the hidden camera modes (sports, GPS, etc).​
All Versions:
------------------------------
3G_CommManager.cab
Adds a 3G switch to the CommManager, that enables/disables 3G on the device. The graphics (button) was taken from here, thanks JZ SmartMort. Please remember to install this onto DEVICE, not STORAGE CARD.​

Downloading .. ..
Let's Test it

Tabs included
Hi, could you tell me what Tabs are included in this rom and also from your test, could you say what is the Battery life like on your rom.
Thanks for sharing

Bravo, frate, iaca si un roman aici(de cand astept)!
Descarc si postez impresii...
Way to go!
Downloading and some impressions later on ...

zjxpot said:
Hi, could you tell me what Tabs are included in this rom and also from your test, could you say what is the Battery life like on your rom.
Click to expand...
Click to collapse
Your questions have been answered in the FAQ post (post #2).
Thanks for your interest.

pagepool
Hi,
I've installed this rom and it's very very fast but it has lower free ram than other roms.
Why have you set pagepool to 32 mb??
It starts with 60 - 65 mb of free ram and after a while it seetles down at 40 - 45 mb free, which it's not much...
New sms notification isn't working, although I've vibration on and a sound for new sms, it doesn't do anything !
Thanks!

Ahh... nice to see a new ROM. I'll test it when the new sms notification bug is fixed and when the pagepool is set to lower value

Appointments
vjeta said:
Hi,
I've installed this rom and it's very very fast but it has lower free ram than other roms.
Why have you set pagepool to 32 mb??
It starts with 60 - 65 mb of free ram and after a while it seetles down at 40 - 45 mb free, which it's not much...
New sms notification isn't working, although I've vibration on and a sound for new sms, it doesn't do anything !
Thanks!
Click to expand...
Click to collapse
Appointments is not showing on home screen.

miancule said:
Your questions have been answered in the FAQ post (post #2).
Thanks for your interest.
Click to expand...
Click to collapse
Neica, esti ardelean 95%, fara jigniri!
Way to go!

vjeta said:
Hi,
Why have you set pagepool to 32 mb??
Click to expand...
Click to collapse
It feels snappier this way - still, I'm considering releasing a version with dynamic pagepool enabled.
vjeta said:
New sms notification isn't working, although I've vibration on and a sound for new sms, it doesn't do anything !
Click to expand...
Click to collapse
I tested this on 2 different devices, and it seems to work - on a new SMS, the SMS sound is played and the notification icon is shown in the taskbar.
Possible resolutions:
1. Eliminate any notification related software - chances are that the notification is blocked by some third-party stuff.
2. Perform a task 29 (here) or flash a stock ROM before flashing this ROM.
I'm still investigating this and waiting for feedback form other users as well.
Thanks for testing this!

zjxpot said:
Appointments is not showing on home screen.
Click to expand...
Click to collapse
Well, I can't reproduce this either .. please take a look at the screenshot attached.
Can you give me more details on how/when is this happening ?
Thanks in advance!
----

Hi, congrulations with your rom. I'm using it now 2 days and...
-Battery consuption is very stabile.
-MSN Money and MSN Weather doesn't work either.
-Facebook and MyPhone apps are old versions.
-On pictures and music tabs does the Manila not rotate.
-Wifi and other wireless things working good.
-I had one problem with unlocking device, after a call that was missed.
Those were my experiences with your rom and I like your rom! Thanks!

alarms & snooze options
Another problem I found its that alarms sometimes don't work, and there's no popup with snooze options when they work.
A pitty because this rom is very very fast, maybe due to this pagepool size of 32 mb...

sms
Sms definetly not working with this rom, no sound, no vibration,...
Even if i activate "wake up on new sms" option there is no sound or vibration, just the screen on with the message, so it's not useful if you haver your mobile in your poket for example.
I've installed two different htc messaging clients NRG 2012 and pyrob 2019, the same problem with all of them.
E-mail notification it's working perfect with push mail.
EDIT: And yes, I installed a stock rom + task 29 before installing this one !

I can't wait for fixes I may be lucky not to have those issues mentioned above downloading right now.
Still waiting for version with lower pagepool as I want a lot of free ram
I'll post my feedback later

posting from touch hd...
this rom is soooo fast and smooth! the fastest 6.5.3 + 2.5 I've ever tried.
even I dont have to turn off animations in CHT!
Ive got one bug: the volume screen does not appear, but the volume can be changed - i hear the click sound when pressing vol buttons.
good job

vjeta said:
Sms definetly not working with this rom, no sound, no vibration,...
Even if i activate "wake up on new sms" option there is no sound or vibration, just the screen on with the message, so it's not useful if you haver your mobile in your poket for example.
I've installed two different htc messaging clients NRG 2012 and pyrob 2019, the same problem with all of them.
E-mail notification it's working perfect with push mail.
EDIT: And yes, I installed a stock rom + task 29 before installing this one !
Click to expand...
Click to collapse
Thanks for the report - I'm still trying to figure out what's going on...

PebbleOS Firmware Release Note

Lastest version : Pebble Changelog
Pebble Firmware 2.4 (Release Notes)
Fix a potential crash when using scroll layers or animations
Added support for realloc
Added a gbitmap_create_blank function to create empty bitmaps of a fixed size
Added number_window_get_window()
Fixed a crash with atan2_lookup when high input values were used
Fixed a bug where TupletInteger could not be used with unsigned integers
Fixed several bluetooth reliability issues
Fixed a case where the "Setup notifications" banner would erroneously show in the iOS Pebble app
Fixed a bug with the music app where media playing faster than real time could not be paused
Fixed a bug where the notifications view could show a rapidly increasing counter for number of notifications when first displayed
Fixed a bug where switching watchfaces could cause the same watchface to be relaunched
Pebble Firmware 2.3 (Release Notes)
Improved Bluetooth LE connectivity.
Added the ability to skip to the next notification with a double-click of the Down or Up buttons.
Bug fixes and stability improvements.
v.1.14.1 - Date: 11 Dec 2013
What's New
New "Do Not Disturb" feature: schedule the times you do not want to be disturbed by notifications.
Updated "Alarms" app: create multiple alarms, toggle alarms on/off and edit them.
New "Snooze Alarm" feature, customizable via the Alarms app.
Finer control over what notifications are displayed: Notifications On, Phone Calls Only or Notifications Off.
Notification settings are now accessible more quickly through a dedicated menu in the Settings app.
iOS 7 notifications now arrive more quickly on Pebble.
Bug Fixes
Fixes an issue where the Pebble may enter "recovery mode" immediately after updating to 1.13 software.
Fixes an issue affecting some iOS customers where the Bluetooth connection would be dropped after a few seconds.
Fixes a problem where phone calls would not get displayed any more after having received a missed call.
Fixes issues where Bluetooth transport would become unreliable (particularly during a firmware update).
Sometimes the Pebble would keep on vibrating after dismissing a phone call. This has been resolved.
After exiting Airplane Mode, the Pebble will now immediately attempt to reconnect to iOS devices, instead of waiting a minute first.
Click to expand...
Click to collapse
v.1.13.0 - Date: 11 Nov 2013
What's New
Adds support for Apple Notification Center Service (ANCS) notifications for iOS 7 users with iPhone 4S, iPad 3, iPad mini or iPod Touch 5 or greater (requires Pebble iOS app 1.3 or greater). See help.getpebble.com for more information on setting up iOS7 notifications. * The Pebble now can show >80 unread notifications, up from 8 previously. Bug Fixes ----------
Issues when receiving a phone call around not showing caller-ID, dismissing a call when pressing the back button, or continuing to vibrate, have been fixed.
New iOS users no longer need to manage access to their address book in order to see Caller ID on their Pebble.
Sometimes settings would be lost when the Pebble was rebooted. This issue is fixed.
Click to expand...
Click to collapse
v.1.12.1 - Date:16 July 2013
What's New
Bug Fixes
Fixed a problem that caused the phone app to disconnect immediately after a firmware update.
Click to expand...
Click to collapse
v.1.12 - Date:2 July 2013
What's New
The backlight now turns on momentarily when a charger is connected.
Lots of goodies for watchapp developers that will be unlocked when the new version of PebbleKit is released.
Bug Fixes
Fixed subject/sender cutoff in notifications with long subjects/senders.
Fixed motion backlight from sporadically not working.
Fixed factory reset to disable the QC app and perform the reset.
Fixed long click release after changing the action bar icon.
Fixed textlayergetmaxused_size to always return the right size.
Fixed graphics draw pixel, circle, round rect to draw inside the layer.
Fixed graphics draw rect, round rect to use the stroke color.
Fixed graphics GCompOpAnd bitmap compositing mode to not have artifacts.
Fixed graphics gpath filled to not have cuts.
Click to expand...
Click to collapse
v.1.11.1 - Date:1 June 2013
this minor update fixes bugs with Sports watchapps like Runkeeper and FreeCaddie.
Click to expand...
Click to collapse
v.1.11.0 - Date: 30 May 2013
What's New
Improved Notification UI
Allows multiple notifications to be viewed if they arrive within a short time frame
Improved Set Time UI
Added the option of showing your current speed (as oppossed to your pace) in the RunKeeper application.
Swapped next and previous track buttons in the music application.
Added the Simplicity watchface.
Removed the Fuzzy Time watchface (it is available through the watchapp library).
Bug Fixes
Fixed a few issues where the bluetooth module would consume too much power.
Fixed an issue where rounded rects drawn with graphics_fill_rect did not handle being clipped properly.
Sped up text rendering when some of the text layer is clipped off the screen.
Fixed a bug where the vibrating motor would get stuck on.
Fixed a crash when changing windows, most commonly seen in the set time and set alarm UIs.
Fixed an issue where SMS messages on iOS would be incorrectly shown as an email with a very long subject line.
Click to expand...
Click to collapse
Usefull links
Watch apps :
http://www.mypebblefaces.com/?date=desc
http://allpebble.com/index.asp
Source :
http://developer.getpebble.com/getting-started/index.html Preview of next firmware and next smartphone apps
https://forums.getpebble.com/discussions

It's (almost) Software Time!
Hi Pebblers!
It’s no secret that we’ve been hard at work developing better software for Pebble and this Wednesday, November 6th, we’ll be making a very important announcement.
You’re invited to join our livestream event at 10AM PST to hear what awesome new things we’ve been working on to make Pebble a more robust and feature-rich platform. To tune in, visit https://www.getpebble.com on Wednesday morning after 9AM PST to obtain a link for the livestream. After the live broadcast hosted by Eric and our very own Thomas, we will be leading a Reddit AMA discussion at noon (12PM PST) to answer any lingering questions you may have.
Still haven’t had a chance to try out the SDK? Download the SDK, check out the documentation, and get hacking!
Click to expand...
Click to collapse
Source : http://www.kickstarter.com/projects...per-watch-for-iphone-and-android/posts/651308

Any updates on V2?

slowfuse said:
Any updates on V2?
Click to expand...
Click to collapse
What update? V2 is officially out!

alex_herrero said:
What update? V2 is officially out!
Click to expand...
Click to collapse
...but there's no mention of it in this thread as of yet.
Sent from my Nexus 4 using Tapatalk

Don't really care if listed as "out" or not. I am running it.
The previous (now deleted) posts listed the change log for v1 revisions. That would be useful/interesting.

V2.0.2 firmware updated on my Pebble.
Sent from my Nexus 7 using Tapatalk

Version 2.1 updated on my pebble

2.2 is here. Music volume control + apps reordering.

Firmware 2.4 is here

2.4.1 has just been released
Sent from my C6903 using XDA Free mobile app

2.5 has just been released

DonDragonka said:
2.5 has just been released
Click to expand...
Click to collapse
Is 2.5 mostly just emoticons and compass or are there bug fixes and/or optimizations as well?
Sent from my SGH-I747M using XDA Free mobile app

There are definitely optimizations, like this: "Fixed a bug that would cause animations between windows to be slow.", but the best new feature (dismissing notifications) is sadly iOS8 only as of now. They promised to bring it to Android in the future.
Although not a feature or fix, but I love the new Domo watchface, the animations are funny and so smooth...

The Full 2.5 Changelog
Major Changes
FW 2.5 includes an optimized version of snprintf (and related functions like APP_LOG, etc) that does not support some length format specifiers previously supported (%hh, %ll, %j, %z, %t). The list of supported specifiers has been updated in the snprintf documentation. For those of you that use these previously-supported specifiers, please do not hesitate to contact us at [email protected] and we’d be happy to assist you with updating your code.
Added compass support.
Enforced versionLabel formatting in appinfo.json in preparation for app auto updates.
Added support for Pebble app relaunch on iOS when a Pebble watch is in proximity.
Added notification dismissal support on iOS8.
Added emoji support to Pebble notifications and system fonts.
Detailed List of Changes:
Changes for Firmware:
Added functions heap_bytes_free and heap_bytes_used to view current heap memory usage.
Added support for uuid_equal and uuid_to_string.
Added function accel_raw_data_service_subscribe to get accelerometer data with a single timestamp for all samples (significantly reduces memory usage for apps that do not depend on timestamps).
Added compass support.
Added emoji support to Pebble notifications and system fonts GOTHIC_24_BOLD, GOTHIC_18 and GOTHIC_18_BOLD.
Fixed a bug that would cause a crash if a screen shot was taken while one was already in progress.
Fixed an issue where Pebble APIs would use non-reentrant versions of standard C functions causing unexpected changes to return values.
Fixed a bug with accel_service that could result in memory being freed twice.
Fixed a bug where Golf API would show stale information on disconnect.
Fixed a bug that prevented calling menu_layer_set_selected_index before menu_layer_set_callbacks.
Fixed a bug which would sometimes cause the command line logging tool to crash when a watchapp crashed.
Fixed a bug that would cause the sample rate of the accelerometer to be reset when subscribing.
Added support for Pebble app relaunch on iOS when a Pebble watch is in proximity.
Added support for notification dismissal on iOS8.
Fixed numerous bluetooth reliability & connection issues.
Fixed a reset and other various bugs related to Data Logging.
Fixed a bug that allowed backing out of FW update screen.
Fixed a bug that would cause animations between windows to be slow.
Fixed a bug where the Date UI would allow selection of invalid dates.
Fixed a bug which would prevent the down button from scrolling through notification history.
Fixed a bug with AVRCP that could lead to a crash.
Set backlight to stay on during alarm ringing.
Changed the default backlight setting to AUTO.
Fixed a bug which would allow developers to ask for more than 25 accel samples per update.
Added check for NULL parameter in gpath_draw_filled.

The middle Button can not anymore be use to dissmiss Notifications. Have to use the single back Button. This was not in the previous fw.
Skickat från min GT-I9505 via Tapatalk

@ormetkruper: That's because that will dismiss the notification. This feature is already implemented with iOS8, we just have to wait till they make it work on Android too.

anyone on 2.6 for now ? Any feedback would be appreciated

My screen starting to tear now.not sure if it is because of this update.
Sent from my Nexus 7 using Tapatalk

2.6 is a very good update, I enjoy misfit app and compas gadget no problems at all using pebblebit firmware 2.6 try it yourself.
Sent from my Nexus 5 using XDA Free mobile app