If Jade Struck at boot screen..
Press volume down key and power key to go to boot loader
Connect to the PC
Flash ROM again.
reserved for future use
Related
hi buddys, i loaded wrong boot loader in my touch diamond.(http://forum.ppcgeeks.com/showthread.php?t=35839 it was there).after that, phone didnt open . power button, charge sign, hard reset dosnt operate..now nothing..how can i load a relocker/default bootloader to switch yours/wrong boot loader back to stock..
Try this
Remove your battery , Then inserted in. Hold Volume down And press Reset button.
Your mobile should go to bootloader(tricolor) screen.
Does it happen ?
Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar
I flashed CM7 to my N1. now its stuck in a loop of the boot animation and will not proceed any further. Power button is dead and bootloader is still locked.
I can reboot into to bootloader holding trackball but fastboot won't work as bootloader is still locked.
I am not sure how to proceed from here...
If you can boot into recovery then you can flash a ROM from there if not then do the passimg method http://forum.xda-developers.com/wiki/index.php?title=Nexus_One/Guides_%26_Tutorials it's under unroot/restore.
My case:
My N1 rooted with broken power button, i am using latest nightlies. I am stuck at boot, looping and looping, I cannot access recovery boot to restore my nandroid backup or reflash new rom.
If you can boot into recovery then you can flash a ROM from there if not then do the passimg method http://forum.xda-developers.com/wiki..._&_Tutorials it's under unroot/restore.
Click to expand...
Click to collapse
With power button failure how can I power down? Please help.
Try this and see if it's work ...
Connect your phone to charger and let the charging began ...
Remove battery ... hold down trackball and try to replace battery while you are holding the trackball ... maybe you need try this a few times to get it to work .
Android 10 newest version.
So I installed magisk and everything went fine.
But when i switch off my device and turn it on I cant boot it up. It's stuck on the splash screen (turns on, splash screen, warning screen, splash screen) and keeps repeating. i cant boot into recovery either.
From what i read to boot into magisk on a s10+ you have to hold bixby+volume up+power, and to boot into recovery press those three, but when you see the second splash screen let go of the bixby button and keep holding the power+volume up.
I have flashed TWRP through the official twrp app, and maybe that's the problem? Maybe i don't know when to press those button combinations, but i have tried quite a few time and i just cant move past the second splash screen.
Please help.
Bluetinity said:
Android 10 newest version.
So I installed magisk and everything went fine.
But when i switch off my device and turn it on I cant boot it up. It's stuck on the splash screen (turns on, splash screen, warning screen, splash screen) and keeps repeating. i cant boot into recovery either.
From what i read to boot into magisk on a s10+ you have to hold bixby+volume up+power, and to boot into recovery press those three, but when you see the second splash screen let go of the bixby button and keep holding the power+volume up.
I have flashed TWRP through the official twrp app, and maybe that's the problem? Maybe i don't know when to press those button combinations, but i have tried quite a few time and i just cant move past the second splash screen.
Please help.
Click to expand...
Click to collapse
I can however boot into download (odin) mode by pressing the volume down+bixby and connecting to my pc.
try to reflash twrp . but using twrp from @ianmacd and flash using odin.
put ianmacd's twrp .IMG into .TAR using 7zip and flash Odin as AP @Bluetinity custom twrp is better than official ?
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
I flash via ODIN - it says PASS. I reboot using power and up. I remove the power button as soon as it flashes black, but it keeps going back into my ROM and not recovery. I've tried all combinations. Any suggestions?
Maybe you are releasing the power button too early.
The boot loader must boot with the button combination pressed.