Related
Short question, maybe someone knows. If I want to add a new Server in MMS Configuration the [New] button is not responding.
How can I re-activate this button.
anyone, help would be appreciated.
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
_Nomad_ said:
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
Click to expand...
Click to collapse
Yes I guessed that one, therefore I was hoping to get some "other" advises before I hard-reset and notice the same.
I would search for a cab named "Set_up_MMS_folder" in before going back that far. You already have a folder, but reinstall could help fix whatever you are missing.
Good luck.
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
_Nomad_ said:
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
Click to expand...
Click to collapse
No it didn't work, I was re-installing my phone. I installed my normal things, as always, like spb today etc. This time I flashed the std T-mob ROM because I was a little tired of all the small problems I had with the home-cooked and now this...........
The mms folder and everything I have, it's only the stupid button which doesn't work.....
........It's there, but even he color shows it's not active.
Im seriously starting to believe the so called gurus in here arent exactly up to snuff ....so to speak. your problem is simple... you have to browse to regedit..somehow(!! can you figure that out?)
oh, just got it:Total commander, tap the two dots in far right (..)
tap the root (\\)
tap registry/hklm/software/arcsoft/...MMSUA/CONFIG/UI/
DRUMROLLLLLLLLLLLLLLLLLLLLLL... now YOU figure out which setting to enable!
nah, it should be EnableServerEdit ...i think, change the value to '1'
voila
THIS DOES NOT MEAN MY MMS IS WORKING...... I HAVE A PERSISTENT PROBLEM BEING UNABLE TO SEND MMS & everyone is CLUELESS!!
aaaaarghhhhhhhhhhhhhhhhh I WANT TO DIE!!!!!!!!! lol
ifull, thanks for the advise, this did the trick. Thanks again, I'm not into registry editing.
I think my problem, as you said, was so simple that the experts thought I would figure this out by myself, LOL.
Thanks again, if I can help you in someway, please PM.
What are the right mms settings
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
settings
here are the settings that should be there according to tmo website - http://support.t-mobile.com/knowbase/root/public/tm21387.htm
on mine those are right but what I think the problem is this, when mms is sending it keeps getting interupted by gprs trying to connect. is there a reg hack to let mms send without being disconnected????
I believe in regedit there are some errorlog.txt files that show you the WHOLE transcription of your attempted outbound messages. If I find mine, I will post it as it shows where the delivery went wrong.
so are you trying to say your 'mms fix' of a day or so ago is not quite "fixed" or what?
re:
this whole mms thing is starting to make me feel like its a tmo network issue and not the device, just never know...but I did flash my rom to X's 2.26 w/ 2.47 radio
mms fix i think
once u hak the reg and change the setting as listed earlier to allow settings edit... click on tmobile mms settings and it should show the settings that were downloaded from tmo...but u want to change the option that says connect via mms --) to connect via data..
I just did that and it sent right away...
it works, click on the tmobile mms server and then change the connection to via data instead of mms... I just sent a message to my self and it sent it out my outbox in less than 30sec for a 75k file
robpet2 said:
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
Click to expand...
Click to collapse
I think the settings are operator dependend
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
Click to expand...
Click to collapse
Yes thanks again, I had to do some regedit fixes, like I deleted the whole tree below what you mentioned. Now I'm able even to set as default.
I renamed the thread, because I know a lot of people have problems with MMS.
error log
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
Click to expand...
Click to collapse
yep I got error log msgs but it still send the pics
Thanks!!
More proof how valuable the information shared here can be.
no matter what web page i try to acces it keeps giving me this probelm. does anyboyd have a fix for this. im usin wm6 pd v3. I really thank you guys. i already tried searching and couldnt find anything out.
deviusdragger said:
no matter what web page i try to acces it keeps giving me this probelm. does anyboyd have a fix for this. im usin wm6 pd v3. I really thank you guys. i already tried searching and couldnt find anything out.
Click to expand...
Click to collapse
when is this ? using WIFI connection ? gprs data ? BT internet ?
just my regular gprs connection. im thinking maybe something in my registry could have been messed with but i wouldnt know what to check for. i was looking at the wiki but still cant find the problem. any ideas bro?
The same problem
deviusdragger said:
just my regular gprs connection. im thinking maybe something in my registry could have been messed with but i wouldnt know what to check for. i was looking at the wiki but still cant find the problem. any ideas bro?
Click to expand...
Click to collapse
Hi, I have the same problem from time to time:
-first, I'm unable to change the homepage for PIE. I set it up but once I close the options menu it comes back to empty.
- sometimes it says "the page can't be showed" and everything seems ok in the connection. it seems that changing the active connection in settings -> conn -> conn it works again.
A little bit dissapointing...
It also changes the name of the proxy in the connection config without intervenction and then it doesn't work (but this happens when I connect through AS).
I'm using WM6 clean version (not the pdaviet).
for some really really weird reason the only web page that i can bring up is the www.cingular.com website. nothing else. that is just weird. so now i have to resort to opera mini but i just want my PIE to work. anyone got any other ideas? a little help
using pdaviet3 .. no problems untill now even google personalized homepage works great....
I GOT IT FIXED!!!! Good thing i have 2 8125's. so i just looked at the registry settings on my old one and i saw that for user agent it had HTC-8100 mozilla and all that good stuff. so got it fixed with sktools and now all is great. so thanks to anyone who tried. but yeah pd v3 is working awesome! Love it
deviusdragger said:
I GOT IT FIXED!!!! Good thing i have 2 8125's. so i just looked at the registry settings on my old one and i saw that for user agent it had HTC-8100 mozilla and all that good stuff. so got it fixed with sktools and now all is great. so thanks to anyone who tried. but yeah pd v3 is working awesome! Love it
Click to expand...
Click to collapse
And could you please share which keys have you modified, please? Because I continue with the same problems...
ok if you have sktools or something that shows you your registry settings this is how they should be:
user agent:
HTC-8100/1.2 Mozilla/4.0
user agent (version)
MSIE 5.5
user agent (platform)
Windows CE
user agent (description)
Default (Windows CE)
these as the stock settings. if they dont look like this then there might be a problem. Good luck
i'm in the registry but I did a search through the registry and can't find any mention of user agent, can you give me a full path? thanks
okctmaxxer said:
i'm in the registry but I did a search through the registry and can't find any mention of user agent, can you give me a full path? thanks
Click to expand...
Click to collapse
I suggest that you buy sktools. its an awesome program and there you will see what i was talking about. Or atleast use the trial version and then get into the tune up! option. and then click on the pie tab on the bottom and you will see all that good stuff buddy. try out. hope this helps you out.
okctmaxxer said:
i'm in the registry but I did a search through the registry and can't find any mention of user agent, can you give me a full path? thanks
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Interneet Settings\5.0\User Agent\
Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
krakout said:
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
Click to expand...
Click to collapse
Check your registry settings! Use KaiserTweak or Schaps' AdvanceConfig!
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
krakout said:
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
Click to expand...
Click to collapse
If you are technical, try this: Download KaiserTweak's latest XML file and open the file in Notepad. Then see what registry key(s) is(are) modified for this tweak.
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
If you're really technical, you can follow through with cmonex's way found here.
If not, search for dot fred task manager, which includes a great *FREE* registry editor amongst other tools, much better than PHM Reg Editor, imo....
Whoa, thanks a bunch. I'll try the task manager first (found here, btw), but I'm not sure if I'll be able to run it either - the whole system seems VERY restricted! I'll try to make heads from tails with the instructions in the other thread. Thanks so much!
Btw, I do seem to remember a program that allowed you to edit the PPC's registry from Windows PC, anyone remember that?
Thanks again guys - much, much appreciated!
You can run the untrusted app, i.e. Advanced Conig. Just select yes. Then make the changes.
BTW, to view the xml, just Open notepad on pc & drop the xml in the notepad window.
No I can't that's my problem - it just flat refuses to run it, it doesn't give me the prompt.. that's why I'm asking for a PC-based registry editor!
Anyhow, I'll try it today and will let you know if I manage it!
krakout said:
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
Click to expand...
Click to collapse
http://www.pocketpcfreewares.com/en/index.php?soft=1399
Here is another PC based mobile registry editor. Simple to use and works well. Havent found any serious problems with it
Yes, I'm trying this right now
Btw, the registry setting seems to be:
HKLM\Security\Policies\Policies\0000101a
Value=1: disabled
Value=0: enabled
Desc.:Enable or disable the warning you get when opening a program that is not digitally signed
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Carty said:
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Click to expand...
Click to collapse
The problem with this cab (and another one I had found) is that, once the mobile goes berzerk, you can't install it because, of course, it's unsigned... Catch 22! Thanks anyway - and, by the way, superb site, added to my RSS aggregator at once!
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
krakout said:
..by the way, superb site, added to my RSS aggregator at once!
Click to expand...
Click to collapse
Thank you My pleasure to serve the pocket pc community..
krakout said:
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
Click to expand...
Click to collapse
It has to be set to 1 for disabling.. You set to 0?
Regards,
Carty..
Yes, I set it to 0; it was set to 1 (probably an earlier KaiserTweak session), but I actually wanted to get the prompt so that I could tell it that f*cking yes, I want to run/install the app!
Anyhow, been switching between 0 and 1 with no effect... Feel a hard reset coming on, but it's weird because I've found quite a few posts around (not necessarily here) and no solution...
Got the same problem after a white screen after hardspl, but changing the registry worked for me. Thanks, now I can try jumpspl.
Hi I have a big problem, I can send MMS in full size, but when I get a MMS and it downloads its shrinked to almost 12 kb (very small picture) can hardly see whats on the picture...
I'm on Three network in sweden, I have never had a problem with MMS with them and I had alot of phones from them....
I have tf3d installed, is it maybe causing the problem?
Anybody experience the same problem?
Anybody have a solution?
Thanks
check this thread( in swedish).
Same problem as you
http://www.minhembio.com/forum/index.php?showtopic=213547
Ok thanks u, I wrote in that thread but I write here to because I'm here more often...
I have the same problem but it seems I have it even if the sender is not on 3 (three) I tried mms from a comviq mobile and the result is the same....
Have u maneged to fix it in anyway?
I search the net and I can see alot of WM mobiles have this problem, but some in here on the XDA have got a cab to fix it and make mms work...but I don't know if the cabs work on Xperia and sweden.
http://forum.xda-developers.com/showthread.php?t=274168&page=5
See post number 57
http://forum.xda-developers.com/showthread.php?p=1505432
Do you think it will work for us with the xperia (three problem)
Anybody have a solution or can think of one?
They have found a solution for the Samsung omnia with the same problem
http://forum.xda-developers.com/showthread.php?t=421893
Somebody have to help us with the xperia..anybody that can look into it?
Nobody have the same problem? have anybody a solution? please help MMS is very important to me!
Have you reported this to the X1-support? If you haven't you should really do it.
Regards,
Michael
I have the same prob on Tmobile USA. I think because my carrier doesnt regconize the handset as one of their known phone so they shrink the pic size to the minium resolution. I dont know if that is true. It's really annoying.
Rodin69 said:
Have you reported this to the X1-support? If you haven't you should really do it.
Regards,
Michael
Click to expand...
Click to collapse
I have not done that, because I think the problem is with the carrier THREE and as romeo0119 wrote T-Mobile in the US, it is the carrier that doesn't recognize the phone, I have reported to them but they are incompetent ***** But I will report to X1 support and see what they have to say.
MMS picture size
Hi Kevin,
I have exactly the same issue on my X1 but im with O2 (via CPW).
I received a MMS pic today for the first time and it also re-sized it to 12kb and the pic ended up being rediculously small....
I would be apprecative if anyone else has experienced this or if there is anyway to fix it....?
Cheers
Phil
MMS picture size
Hi,
Im having the same problem . I have reported this to X1-support so just waiting for a reply. I also tried the fix they found for the Samsung omnia just for trying sake but this did not work. I will post any reply i get back from X1-Support.
Tricky1982 said:
Hi,
Im having the same problem . I have reported this to X1-support so just waiting for a reply. I also tried the fix they found for the Samsung omnia just for trying sake but this did not work. I will post any reply i get back from X1-Support.
Click to expand...
Click to collapse
what brand your on? because mine works with telia and telia2 its only with 3 (three) it doesn't work...and please tell us what x1 support says
Anyone found the answer yet...?
Its getting so annoying only having small 17kb pictures sent to me.
No still no answer =(
There was one guy who had this problem over at esato and he fixed it. This is hidden in a rather long genieric thread so i'll just copy his post here...
"Basically, it has something to do with the phone not being set up, or directing to the correct 'profile' with the network operator. For example, my settings were directing to the Taiwan HTC website for some reason. Because O2 didn't have these settings, it was defaulting the MMS settings to how they were when MMS was first introduced.
The solution is basically using a program like PHM Registry Editor to change the profile, so it directs to the correct details. However, as there aren't any specific Xperia ones yet, you can have it use those of another phone. In my case, I have used the N95 settings, as these are ones set up on O2.
So, in the reg editor you need to go to HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
There will be 6 strings in this part of the registry. You just need to edit the 'User-Agent' profile to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
And the 'Profile' string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
You don't need to reboot. And that should get the pics coming through at the correct size.
Hope this helps if anyone is having the same problem."
This thread
http://www.esato.com/board/viewtopic.php?topic=164743&start=6480
page 433 - his/her nickname is s32bauer...
mobmanX said:
There was one guy who had this problem over at esato and he fixed it. This is hidden in a rather long genieric thread so i'll just copy his post here...
"Basically, it has something to do with the phone not being set up, or directing to the correct 'profile' with the network operator. For example, my settings were directing to the Taiwan HTC website for some reason. Because O2 didn't have these settings, it was defaulting the MMS settings to how they were when MMS was first introduced.
The solution is basically using a program like PHM Registry Editor to change the profile, so it directs to the correct details. However, as there aren't any specific Xperia ones yet, you can have it use those of another phone. In my case, I have used the N95 settings, as these are ones set up on O2.
So, in the reg editor you need to go to HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
There will be 6 strings in this part of the registry. You just need to edit the 'User-Agent' profile to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
And the 'Profile' string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
You don't need to reboot. And that should get the pics coming through at the correct size.
Hope this helps if anyone is having the same problem."
This thread
http://www.esato.com/board/viewtopic.php?topic=164743&start=6480
page 433 - his/her nickname is s32bauer...
Click to expand...
Click to collapse
Anybody have tried this?
it worksssssssssssssss! thanks alot mobman!
whats exactly you did ???
change the value of key for this:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
o somethings different???
Thanks for your answers.
yes, in the registry under
HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
change the user-agent string to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
and the x-wap-profile string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
its as simple as that. worked like a charm
figurine said:
yes, in the registry under
HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
change the user-agent string to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
and the x-wap-profile string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
its as simple as that. worked like a charm
Click to expand...
Click to collapse
I did as you mentioned and it still not working
i did as mentioned and it WORKS!!!!!!!
THANK YOU!!!