Database Develop

Stuck At 28%

I know there are others experiencing the 28% death wall while trying to flash WM6, but there doent seem to be any specific solutions to this.
I have a Dopod D810 and has already installed 1.30 olipro. Just trying to flash to the official WM6 ANZ Rom. No luck.
Any suggestions guys?
Should just be a very straight forward procedure. Flashing a Dopod with an official Rom.

should be, but it's not... mine is Dopod asia, and stuck at 28% when flashing. Not too sure, but really seemed to me that it was something related to hard-spl. After the 28% error, i reflashed an unofficial rom and tried the official again.
eventually it worked for me.
i guess you don't technically need to manually enter hard-spl first before flashing official ROM.. if anything went wrong i guess you could send it back to them..
safest is to use a modified RUU so it just flashes ROM without IPL + SPL.. i thiiiiiink problem is something to do with SPL

which unofficial rom did u reflash it to? I've been going back and forth with AX3L_OS v3.0.0.2 and the official ANZ dopod rom.
tried about 5 times now. still trying. each time it fails at 28% it's another 10 minutes to flash backto the unofficial rom.
maybe if i try to trce ur steps exactly it might work.

i was flashing to some pdaviet ROM, but i don't think that would make any difference from ax3l's...
have you tried flashing the official ROM with a modified RUU, or you really want the whole package...
If you're just trying to keep everything official i guess you could try to flash the official rom without manually entering bootloader and take your chances. Being that its an official ROM i guess it's safer, or at least covered in warranty..
One question, why don't you try to flash to official WM5 ROM, then to official WM6.. since technically it's supposed to work that way
seriously, i'm not sure why you'd want the official one though.. it's nothing special

Yeah I've tried flashing back to the official WM5 and then WM6, same story.
Tho I havent tried flashing the official WM6 through modified RUU, mainly coz i dont know how to.
Also, In the AX3L version of WM6, there doesnt seem to be a phonepad input method. only keyboard and block recongniser and one other one. Is that coz it's a modified rom, or does WM6 not have the phone pad input. if that's the case i can forget about flashing to WM6 all together.

can't remember if official wm6 has phonepad, but you can just install a cab for it, so it's not a big deal.
look on my site for a link to modified RUU official ROM... instructions are here

i had a lot of problems being stuck at 28%
what eventually i got it to flash to the aus rom was i used SPL 1.20 then it seemed to flash fine.
for some reason my phone doesnt like any other version of SPL besides the one on the latest aus rom either, i flashed to a cooked rom and couldnt flash back until i had put spl 1.20 back in then flashed back to the aus rom.

I have the same problem with 28% stucking
I try to reflash but I still have the same

do you have hard-spl? if so, which version? If you do, flash back a cooked ROM..
if not, you need to try to flash official ROM..
if neither is working, use splxploit. I think all links you need are in this thread already

I have a same problem.
I was upgraded from WM5 to Hong Kong Official WM6 chinese ROM, then I want to change to Official English ROM, I did the Hard-SPL 1.3 and get the SuperCID, but when upgrading the WM6 English officeial ROM, this was stuck at 28%.
Now I was able to flash back to WM5 rom, but I world like to Upgrade to WM6 official ROM, anyone help?

I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps

you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
HI, Thank for your reply, how can I do the modified RUU?

Hi all,
I have success to flash the WM6 official ROM.
this is my experience:
To flash the Radio ROM first, I has flash the 1.50.08.11 Radio ROM.
Then to download the Dutty NBH Tool to take off the Radio DOM of WM6 official ROM.
Then to flash the modify ROM.
Now, my phone is running WM6.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
Learn something new everyday. Never knew that simply modifying the RUU would itself allow the updates. Just tried it, and yes it works also.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
how do mofify the RUU? and what do I modify it to?
thanx walterjm

Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
WildsideUK said:
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
Click to expand...
Click to collapse
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!

I had the same problem and I resolve it by extract the rom and re-build it ... look at the thread http://forum.xda-developers.com/showthread.php?t=327667
Good luck

uh oh... i think i may have bricked my phone...

so i was trying to revert back to the stock SPL, and i downloaded Restore-SPL-1.15, and i opened it up and renamed the file to BLACIMG and placed it on the storage card and flashed it and now, the phone loads in bootloader mode and says error and is stuck on the loading... screen i think i really ****ed myself over... can any of you guys give me some advice on what to do?

As far as I know, you must flash stock ROM before going back to the stock SPL. Your problem is probably caused by having stock SPL with non-stock ROM.
Somebody with more experience might offer a better solution, but I would suggest you to read about USPL, I believe USPL is the cure for your problem, read about the details.

So have you successfully flashed the stock SPL? If so, try flashing a stock rom now, use the SD card method (blacimg in root storage card + hold vol up/down and power), if this works then its what vizier said, you can not run a non-stock rom on a stock SPL (without USPL). But then you will be able to continue flashing .

i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww

itzjonjon69 said:
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
Click to expand...
Click to collapse
Haha good good... I was about to tell you to read the guide in my signature... but I am glad you got it fixed bud!

please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
RUUNBH
BLAC100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again

reyber said:
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
blac100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step

cRaCKwHoRe said:
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
Click to expand...
Click to collapse
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort

reyber said:
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
Click to expand...
Click to collapse
It's actually quite hard to flash a rom from the SD card when using SPL... you have to remove and insert the SD card at appropriate times... I would recommend doing it over USB as also suggested by many others.
Have you tried loading said rom over USB when phone is in bootloader and USPL is loaded?

it worked like a charm
i want to thank you very much for your effort

reyber said:
it worked like a charm
i want to thank you very much for your effort
Click to expand...
Click to collapse
Awesome, glad to hear!

Morning all,
I think I've done the same thing. I have stock SPL and a non-stock ROM... I'm on SPL 1.14... I'm a bit stuck because nothing will seem to load on to via USB...
I tried running "RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe", but the phone simply reboots to the bootloader, the bottom text changes to 'USB', but it goes no further. It eventually shows Error 262 (comms error).
Any ideas?
Thanks!
------
EDIT: Managed to resolve this by using USPL to put back HardSPL by OliNex

URGENT HELP!!! Rhodium stuck keeps rebooting

Hi there, I installed "RUU_Rhodium_HTC_ARA_1.19.415.1_Radio_Rhodium_3.44.25.27_Signed_Ship" on my phone, and now it is stuck on the reboot screen, and it keeps rebooting constantly. it won't boot anymore.
I tried to install a different Rom, and it still won't boot.
I tried the hot fix rhodium radio 3.46.
I tyried SPL loader. no luck
Any help is greately appreciated.

Do you have Hard SPL?
Have you tried re-flashing the stock ROM for your device, not just "another" ROM?
Dave

yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?

ericsson12 said:
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
Click to expand...
Click to collapse
Can you boot Windows Mobile? If not, can you re-flash your carrier's ROM (hopefully they have a Ship Exe) whilst in the bootloader (see the Rhodium wiki pages)?
Ta
Dave

Have you tried Mtty?
Mine got stuck at bootloader a couple of days ago, because my computer hang in the flashing.
Second time Mtty saves me

I am able to boot into windows now, but i am unable to load the Arabic ROm.
Help please

I've had something similar.
But my phone kept reinstalling itself every time it booted.
Now I know this was a diamond, but I think it might help.
Maybe someone else could look at this as well and give his opinion about it.
The thread about this case is here http://forum.xda-developers.com/showthread.php?t=493131
Hope that helps

i had this problem.. the only way that seemed to work with me is flash stock spl then flash rom.. once the rom is flashed succ run the arabic localization.. finish it n the re-flash hspl.. thats is the only way around it.. i think there's a conflict between the ara setup n hspl.. dont know if it'll work with u, but did with me since my device accepted the rom in stock spl.. hope it works for u ;-)

Bad Flash?

Ok, here's what i did:
I'm sending my xperia back to vodafone, so i need to restore stock rom and spl. I flashed a NL Vodafone R3AA rom (found here) to my phone yesterday, which worked perfectly. Did a hard reset, and went on with restoring stock spl.I tried using the special RUU with a replaced stock spl .nbh (the method described in one of the topics here), but the RUU couldnt find my phone. Since i didnt have another PC here, i tried to flash the .nbh to my phone via the micro SD method.
This went well, the progress bar filled up and disappeared, followed by 10+ minutes of "loading". Advised by a friend, i pulled out the battery, put it back in the device and powered it on. The phone instantly booted, showing the bootloader-screen and saying it's going to resume flashing the device. Followed by another endless "loading" screen.
But, since i got a chance to look in the bootloader-screen, I saw the SPL version was now 0.72.000 (or something like that, at least the OliNex text was gone). Afaik, this means the stock spl is back. I tried replacing the stock spl Kovsimg.nbh with the default one provided with the custom RUU (which is OliNex HardSPL, right?), but it showed the same "loading" screen. I havent tried flashing the rom again, since the bootloader says it's on stock spl at the moment...
What can i do? I guess they dont accept bricks over at vodafone...
Thanks in Advance,
Sorbo

using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!

You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.

Ok guys, thanks for the replies
Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
The phone is back on stock spl, is it possible to flash a rom? Or only stock roms? (Sorry for my dumb question, havent been into flashing for a few months now)
aethelbert said:
You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.
Click to expand...
Click to collapse
Ok, thanks for the tip R2AA it is!
When flashing the rom the radio was also updated, but i'll try this

R3AA was properly released!
if you want to be cure of complete stock why not just use SEUS?
and there is no need to flash radio with stock ROMs as they're included, all your doing is flashing a radio extracted from a stock rom anyway! this means you don't have to hardspl

Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
And this was the winning tip. Just flashed back the R3AA rom (vfone NL), even though i doubted if it would work (since the bootloader said it was back on stock spl), but it did.
Phone works again. Bootloader now says 0.78.000 (or something like that, no OliNex), so i guess it's ok now. RUU still isnt able to flash the phone, tried on 3 different pc's ( win7 x64, vista x86, xp x86), but i cant flash the phone...
Ah well, i'll try to send it back, see what they come up with. Thanks a bunch!

Help with upgrade to WM6.5

Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance

Borna_bkpdata said:
Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance
Click to expand...
Click to collapse
updating your Hard-Spl to HSPL 1.83 first ! in order to flash WM 6.5 rom or custom rom

Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?

Borna_bkpdata said:
Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?
Click to expand...
Click to collapse
I think it could, try it !

Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.

netrial said:
Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.
Click to expand...
Click to collapse
Please Read Carefully the instruction for installing HSPL 1.83 or better to upgrade it to 2.51.OliNex.Make Sure U Have a internet connection on as hspl needs internet to install.