Database Develop

I Can't Connect my Tilt...HELP!!

I've searched for an answer in these forums and can't find one. I have tried some suggestions from here to no avail. Well...here's the problem. I've had my Tilt for a couple of months. All has been great and i love it...up until now.
I've put several roms on it and they've all worked fine. Got that down...I thought. I can't get activesync to see the tilt on any of my computers. It won't find it on the laptop I've been using to load. My desktop at work, that I've been using sometimes to load it, won't see it and it won't even connect on a new computer in my office with fresh ASync 4.5. Like I said....it has been working fine I just decided today to load a new Dutty rom and I can't even hook up. Wow....this is so aggravating. I've uninstalled and reinstalled several times. Activesync is still on the tilt too. I've killed the program in taskmgr. I've stopped all running apps in the tilt. I have 2 different cables also. By the way....I don't care to wipe it clean...if I need to. Any suggestions as to what I can do? If anyone's got any clues to what my problem could be I would be eternally grateful. Thanks in advance for responses.

Desparate!
Please help me....if you can. I know there's a tremendous amount of knowledge here. Surely someone's been through this same problem and was able to fix it. I've seen another post similar to this and he's not getting an answer to his problem either. If I we need to contact HTC....please recommend that. Some of you "tilt masters" please respond. Thanks in advance.

Also I had a similar problem and i had installed a blackberry program on my tilt. That created a connection problem between my tilt and the sync program and it couldnt see my tilt. I figured out that the blackberry desktop program thought it had dibs on my tilt because the bb was on my tilt. I removed the BB off my tilt it did a hard reset and then proceeded to manually remove every windows mobile device partnership there were many. Rebooted my computer and tried it again and it worked. You could try a hard reset and then and then use system restore to a few days before you had the problem and see if you can trick it.

I had this problem.
Hard-Reset fixed it

Thanks for the replies....I've tried the hard reset twice and that didn't work either. Have been on the phone with HTC support and we did several things. Still not working. He was supposed to call me back in 10 min but didn't for a couple of hours. Anyway...I've got to contact them back and take up where we left off. Surely we can get this thing going again. If HTC can fix it....no one can. When we get it up and going...i'll report back here for others future needs. The phone works great besides that!
Again thank....and anyone else have a suggestion.

Please respond to...
http://forum.xda-developers.com/showthread.php?t=362679
Thanks..

Check the USB pins on the unit, mine were bent down and did not make contact, i think from memory the 3rd pin in is the data connection.
Derek

Phone functionality died this morning

I've had my Tilt running pretty smoothly on the stock firmware since I bought it over the summer (camera stopped working, but that's a different story). Anyway, I did a backup this morning (SPB Backup), and after the reboot I couldn't get a voice signal. If I pushed the phone button, nothing would happen! Now here's the weird thing: I'm able to get a data connection (was able to get new email), but the phone icon still says no service. Has anybody experienced this before, or know of any fixes? I've soft-booted a few times, but didn't want to hard boot if there was a simpler way.
And yes I did search this entire forum for similar posts, but didn't find any.
Thanks in advance!

have you tried a different SIM from a different operator?
you might want to try a different SIM from a different operator just to be sure your SIM and/or operator is not the problem.
if it works with another SIM, you can be fairly certain that it is NOT a hardware issue...in which case, a hard reset will more than likely resolve your problem.
also, are you able to receive incoming calls? what kind of a message does the caller get in case your phone doesn't even wake up and ring? finally, have you tested sms text messaging? try sending a message to someone and also try to receive an sms text message from someone...these little steps will help you confirm whether or not you are experiencing a hardware issue...in which case you might want to consider having it checked/fixed under warranty.
keep searching...cheers !!!

Happened to me once. I tried everything, but didn't work. If it's under warranty, AT&T will replace it. I went through 3 units in the 11 months I owned tilt.

hmmm have you tried flashing another Radio? (don't know what happened to your camera, but if you've got cam & phone issues, it's worth checking the Radio...

It's happened to me twicw also. This is an SPB Backup quirk. I'm afraid a hard reset is all that's left to do.

Well,
first of check if you're connecting to the correct network AT&T and not accidently logged on to the T-Mobile network - perform a manual network search / selection on your device.
If the above step does not help, try to restore your device with the SPB Backup you made. If that also does not work, well, then ... yeah ... hard reset! I would not really consider a RADIO FLASH on your device since it semmed to be working fine for you before that?

Thanks for everyone's suggestions. I tried doing a full restore of the latest backup (that morning), and that seemed to bring back the phone functionality. However, the restore also eliminated a few of my main programs, which was very weird! So, I did a full restore from the previous backup and tested that one out. Everything was like it should be. Then I did a restore of the latest backup's tasks/appointments (only things that changed), and now I'm back to full operation
As a side question, since I'm running WM 6.0 and want to flash to 6.1, would I be able to do a full restore from SPB Backup... or would that be incompatible with the upgraded OS?

You won't be able to perform a FULL RESTORE. There are a couple of changes in WM6.1, so, just to be on the save side I would suggest that you back up your PIM data, then flash to 6.1, restore your PIM data and reinstall all of your application.
BTW:
I was running WM6.1 on my MWg Zinc II and couldn't find any real advantages other than THREADED SMS. The Pocket IE gets a whole bunch of new bugs (for example Frames in websites are not shown or not shown correctly) and experienced a couple of incompatibilities with 3rd-party software application. If you still want to take a chance, good luck! However, I do not believe that you can go back to WM6.0 once you flash to 6.1!

I wouldn't upgrade to 6.1 if you're running SPB software. I was running 6.1 without problems, then loaded SPB Phone Suite, Diary, and Pocket Plus, and suddenly Garmin XT couldn't locate satellites at all. It took several hard and soft resets, and a visit to the SPB forums to realize that 6.1 could be the culprit, and it was. All problems disappeared with 6.0. There was a post at the SPB forums that *seemed* to indicate that SPB apps hadn't been fully tested--they may have used the word "certified"--with 6.1. Good luck.

No, that's not it -- I'm running the latest versions of all of those SPB titles on a stock 6.1 with no problems.

i have no spb apps on this one and i have the problem...it just can't fix the network
it happened few days ago to a guy that isn't quite familiar with ppcs he somehow turned it off and when he turned it on he couldn't get the network...eventually he hooked up after half a day (i'm not sure for how long did this problem last because i don't know does he use soft reset and flight mode)...so i took the kaiser to test it and to see what happened..i messed with flight mode and SR it couldn't find the net at all
tried wm6 and two wm6 radios
tried wm6.1 and two wm6.1 radios
i'll try android...just to test the module itself..if there are any hardware issues

Windows Mobile corruption on my Kaiser

Hi,
Over the weekend, my Kaiser starting giving the error message that it was running low on memory, and i suspect that it was due to downloading large files and the system cache filling up.
I tried ClearTemp and MemAid to regain space and it was a temporary fix.
How ever last night my Today screen was not displaying correctly (only showing HTC Home) and a SPB Wireles icon citing that both Phone Alarm and SPB Wireless were unsigned and incorrect parameters.
I decided to check my 8gb MicroSD to reinstall the applications but virtually all data on it was erased (except for the files in use on the today screen) It was only half full.
I cant even access the settings page to modify my Today screen as the 'settings button is no longer there.
Has anyone experienced this and / or know of a fix. I prefer to exhaust all avenues before i hard reset and build it back again.
thanks in advance for your input.

Dear friend,
your situation looks very complicated. I have never faced such a problem,but I am aware of some similar problems....but those problems are very rare,though.
First of all you need to do some back up if you can and format your memory card on your PC.
Then find some good ROM,I suggest a non modified,stock ROM and flash your device.
I know this can be frustrating,but this is the only way to get your device to work again.
Although I do not know what exactly did you do before that problem appeared,the solution is very simple...new ROM.Stock HTC ROM would be the best.
Let me know if I was helpful.
Best regards,
Alexander.

Thanks, I ended up having to hard reset.
I have currently defaulted to the stock Aus3 Rom but am looking at trying the the WM6.1 Aus3 rom, or even a cooked rom!
It will depend how much time i have to try and fix things if it goes pear shaped again! I dont want to Brick my phone!

VOIP??

I installed some .cab files for Voip... but now my gps is broken TomTom is unable to find my internal GPS... and when i do a hard reset it works again. but when i install that VOIP again the GPS is again gone? maybe i used an wrong version that is only for HTC or something? is there a .cab for the Xperia so i can use VOIP and the internal speaker... and with working GPS ?
I hope someone can help me.

Please use search option, it already has been mentioned before.
http://forum.xda-developers.com/showthread.php?t=522854
you may wanna try 'agephone mobile', a standanlone voip client, also known as a softphone.

Thnx for the reply, i did use search and google etc... BUT i have no one seen with the same problem as me? when i install voip cab my GPS dies? i will reset it now and try urs. I have an orginal Vodafone NL rom should work right?

So i did all the things, now VOIP works great... i can hear with my internal speaker. But my GPS is dead again any idea why? is it because of the original ROM ?

Hi there,
Have you tried to enable the G3 connection settings?? It says you have to delete two registry entries. I did that and also lost the use of my internal GPS. I will try to recreate it tomorrow (was smart enough to write down what was inside the registry entries) and see if that helps....
Greetings,
Andreas

Well, i tried allot... im now currently using SJphone... but it takes allot of cpu/mem? my phone is really slow when its turned on. would be nice if u got an solution...

i don't own an xperia anymore, but once again, i never had any problems using voip and gps. There might be a conflict if you happen to use some sort of tweak program like advanced config or xperia tweak. i am not sure about it, since i don't use any tweaking programs as the roms i use/choose are already optimized for daily use.
I am still using agephone mobile and i'm still happy i found the program. i must have save already about hundred euro's of phone costs.

Would a hard reset be the way to go in getting GPS to work again? Or do you think there is some other option to enable it again. Can't be physically broken afterall.
Or some kind of fix??
Greetings,
Andeas

Hi there,
Well, I restored the original registry keys but that didn't budge )-: My GPS is still as dead as a doornail. I honestly believe that a hard reset is the only way to go from there. Might be a good idea anyway because the TouchFlow 3d that I installed didn't work properly anyway. Unfortunately.
I've got a dutch rom too btw: KPN Mobile.
Still, if anybody knows a way to re-enable the internal GPS without the hard reset I'd be very happy.
Greetings,
Andreas

did you happen to activate agps? well, you should leave it disabled as i can not see the advantage of it since quickgps already provides you of a quick fix.
i don't know either what gps had to do with voip, causing the problems you have now.
I'd suggest to do a hard reset and do not install any optimizing tools, just the voip and you nav app and see how it works.

Toooooo long loading times...

Hey guys,
I bought a HTC Touch Diamond in Dec 2008 and it was more or less fine until a few weeks ago when it just messed everything up. I brought it back to the store and got a new one last Friday. I was busy setting it up the whole weekend (installing Skype, Palringo, Fring, registry editor, .cab-file to get rid of the problem that the keyboard is not changing back to letters (was stuck in numeric mode), Google maps didn't work etc etc.
But now I have a new weird problem. After all the installations, everything worked fine. Then I started to put some pictures via bluetooth on the device, all fine, but out of a sudden, it's so sloooooooow!!! First I thought it's not working at all anymore, but by now I found out that it just takes ages to open programs, e.g. File Explorer, Browser, Settings... or when I receive a sms or email and click on it to open it fully... doesn't matter what I do, except using touch flo, this is working fine. And when the programs are finally running (after no joke about a minute), they are running very fast.
I have a Vodafone branding but am using it with an o2 sim. I never did a rom update or anything.
Does anybody know what that could be and could you help me???
Of course I could just return it again, but it would really suck as I just set it up, put all the contacs on etc (Active Sync isn't working as my pc has vista...), so it would be really great if anybody could help me!!!
Cheers,
mondiera

mondiera said:
Hey guys,
I bought a HTC Touch Diamond in Dec 2008 and it was more or less fine until a few weeks ago when it just messed everything up. I brought it back to the store and got a new one last Friday. I was busy setting it up the whole weekend (installing Skype, Palringo, Fring, registry editor, .cab-file to get rid of the problem that the keyboard is not changing back to letters (was stuck in numeric mode), Google maps didn't work etc etc.
But now I have a new weird problem. After all the installations, everything worked fine. Then I started to put some pictures via bluetooth on the device, all fine, but out of a sudden, it's so sloooooooow!!! First I thought it's not working at all anymore, but by now I found out that it just takes ages to open programs, e.g. File Explorer, Browser, Settings... or when I receive a sms or email and click on it to open it fully... doesn't matter what I do, except using touch flo, this is working fine. And when the programs are finally running (after no joke about a minute), they are running very fast.
I have a Vodafone branding but am using it with an o2 sim. I never did a rom update or anything.
Does anybody know what that could be and could you help me???
Of course I could just return it again, but it would really suck as I just set it up, put all the contacs on etc (Active Sync isn't working as my pc has vista...), so it would be really great if anybody could help me!!!
Cheers,
mondiera
Click to expand...
Click to collapse
To save you a lot of time. You do not have to install some kind of ActiveSync on Vista. It is included and called DeviceCenter. Just a new name but with the same functionality as ActiveSync.
Did you soft-reset the device when noticing that it takes to much time to load an application?
Did you disable TouchFlo (eats a lot of RAM) for some time to see what happens?

Hey,
Thanks for answering so quickly... Yes, I did MANY resets, but it doesn't help. I also deleted a lot of files again, but didn't help either, and there's not much on the device anyway (data storage 51.45MB full, 34.37MB free, program storage 64.14MB full, 46.90 free, internal storage just 37.72MB full). And yes, I also enabled touchflo but it didn't help as well. As I said, touchflo is working fine, when the programs are running they are very quick within the application (quicker than my old device was), but UNTIL they are open, it really takes about 40-60 seconds - just not acceptable!
And thanks for the tip with the Vista Device Center, but I just connected the phone via usb, opened this Vista Device Center, clicked on settings, chose usb/bluetooth etc, the device asked whether to connect via Active Sync which I confirmed but now nothing is happening? And Vista Device Center says it's not connected...? This phone is really driving me insane! Seems like I have to return it again because I really can't work with it being sooo sloooooow :-(

mondiera said:
Hey,
Thanks for answering so quickly... Yes, I did MANY resets, but it doesn't help. I also deleted a lot of files again, but didn't help either, and there's not much on the device anyway (data storage 51.45MB full, 34.37MB free, program storage 64.14MB full, 46.90 free, internal storage just 37.72MB full). And yes, I also enabled touchflo but it didn't help as well. As I said, touchflo is working fine, when the programs are running they are very quick within the application (quicker than my old device was), but UNTIL they are open, it really takes about 40-60 seconds - just not acceptable!
And thanks for the tip with the Vista Device Center, but I just connected the phone via usb, opened this Vista Device Center, clicked on settings, chose usb/bluetooth etc, the device asked whether to connect via Active Sync which I confirmed but now nothing is happening? And Vista Device Center says it's not connected...? This phone is really driving me insane! Seems like I have to return it again because I really can't work with it being sooo sloooooow :-(
Click to expand...
Click to collapse
I think you should. Maybe you should first try to connect to ActiveSync with your next device and after that start installing.
I'm sorry that I can't help you out.

You hav a faulty memory chip. Get it replaced.
-------------------------------------
Sent via the XDA Tapatalk App android

Thanks guys, I think I will... I really can't keep it like that. And if even you don't know a solution, I will get it replaced. Thanks anyway!!