My SSID not found - Touch Diamond2, Pure Q&A, Help & Troubleshooting

i had hard time to search my ACCESS POINT at home. There is no sign of my router. Both my laptop and netbook can search just that the topaz cant find. why? help

Ok, sorry for asking... but you dont have a hidden SSID?
My device has much worse wifi than my laptop, but no problem connection when I'm right next to it. Hopefully it'll be better with future ROMs.
There's a energy saving setting under WiFi for better performance / better battery, have you tried to change that?

You do have 802.11g enabled and not just draft n?

zeeero said:
Ok, sorry for asking... but you dont have a hidden SSID?
My device has much worse wifi than my laptop, but no problem connection when I'm right next to it. Hopefully it'll be better with future ROMs.
There's a energy saving setting under WiFi for better performance / better battery, have you tried to change that?
Click to expand...
Click to collapse
My SSID is not hidden and can detected by other wireless device.
where to go to the saving setting? can please advise? i am new with my phone.

galvinize said:
You do have 802.11g enabled and not just draft n?
Click to expand...
Click to collapse
how do i go able chekcing if i have 802.11g enabled?

why not try entering your Diamond 2 MAC address in the router.

lazylilsnoop said:
why not try entering your Diamond 2 MAC address in the router.
Click to expand...
Click to collapse
i keyed but still canoot

wenxi said:
how do i go able chekcing if i have 802.11g enabled?
Click to expand...
Click to collapse
You need to log on to your router and check the settings.
G

galvinize said:
You need to log on to your router and check the settings.
G
Click to expand...
Click to collapse
just wondering if this phone can scan my access point which is on WPA/WPA2

wenxi said:
just wondering if this phone can scan my access point which is on WPA/WPA2
Click to expand...
Click to collapse
Did you try to turn off all access controls in the router?
Does the phone find *any* wireless network? Go somewhere where you could expect many AP and maybe use some wifi scanning software like WiFiFoFum.

zeeero said:
Did you try to turn off all access controls in the router?
Does the phone find *any* wireless network? Go somewhere where you could expect many AP and maybe use some wifi scanning software like WiFiFoFum.
Click to expand...
Click to collapse
it is able to scan other networks around just that my network it doesnt,

wenxi said:
it is able to scan other networks around just that my network it doesnt,
Click to expand...
Click to collapse
thanks i solved. dont know Diamond 2 chip set cant scan such secure wireless access

Related

Wifi Internet

Hey guys, i got my kaiser a couple of days ago. Its a brilliant machine and i love using internet on it using my wifi connection at home. Suddenly it has stopped browsing the internet. It connects to wifi alright, show good strength signal and everything but when i enter a web address it takes ages to respond and in the end gives the error 'check name and try again.' what's wrong with it...?
i'd appreciate if some could help.
P.S. i have done countless soft resets and a hard reset as well.
cheers
I've had problems like that before. By any chance is your router named something like Linksys or default? I'm wondering if it's connecting but not using the correct profile. I'm not sure about the phones but on a computer you can connect to wifi that is wep enabled without a wep key. You can't get any data from the router but it shows your connected.
Also have you tried another access point to rule out your router?
Don't you have to go to wifi settings and change it from BEST PERFORMANCE to BEST BATTERY or is it the other way around?
ChumleyEX said:
I've had problems like that before. By any chance is your router named something like Linksys or default? I'm wondering if it's connecting but not using the correct profile. I'm not sure about the phones but on a computer you can connect to wifi that is wep enabled without a wep key. You can't get any data from the router but it shows your connected.
Also have you tried another access point to rule out your router?
Click to expand...
Click to collapse
No, i haven't tried any other AP, its my home network and i have only one router. Its quite an old one but i am sure its not from linksys. Last time i successfuly used wifi internet on my kaiser was a few hours ago before i installed a remote desktop access program on my kaiser. I have uninstalled it now but the problem remains.
The phone might have profiles based on the name of the router, so if you have a common name and it picks another one up of that name, it could cause this sort of problem.
ChumleyEX said:
The phone might have profiles based on the name of the router, so if you have a common name and it picks another one up of that name, it could cause this sort of problem.
Click to expand...
Click to collapse
So what do i need to change, the name of the router or the profile on the kaiser, by the way , where is the profile on the pocket pc ?
P.S. its Belkin and the called WLAN.
go into the com manager and hit settings, then wireless lan. You might want to look around in there to see if you can remove the profile.
RESOLVED
ChumleyEX said:
go into the com manager and hit settings, then wireless lan. You might want to look around in there to see if you can remove the profile.
Click to expand...
Click to collapse
Hi again, you wouldn't believe what i am about to tell you. The problem gets solved like magic just with a couple of clicks. In your power settings for the wireless network, change it from best battery life to best performance and voila! it starts working. The moment you change it back to best battery life, it dies out. I have tested it time and again and use another utility called 'vxutil' to use different commands like ping and see information like default gateways and DNS and DHCP but everything was alright.
P.S. this will only work if the network settings are correct ALREADY!
Thanks for the help guys!

Please Please Please someone respond to wifi connection problems

hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
What about DNS??
plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units
Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further
yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again
Excellent news!
oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!
This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol

[help please] No internet connection over W-Lan

I can connect to my W-Lan, but the internet connection isnt shared. Cant load anything on browser, mail, wheater... My roommates use our w-lan for internet with their xda´s and notebooks, just my diamond isnt working. If it is connected over active sync i get internet, just dont want to use the cable all the time. Any suggestion? Thanks for even reading this!
i tried:
radio: original and 1.00.25.05
ROM: 1.93.407.1 and bElite 0.98
Michael
Any suggestions?
is your wi-fi on? do you see any netwrok under wi-fi?
nuj244 said:
is your wi-fi on? do you see any netwrok under wi-fi?
Click to expand...
Click to collapse
And what is your power setting under settings/connection/ wireless network?
If it's set for best battery set it to best performance and try.
Im already connected over wifi. Signal stength is fine. I just cant use the internet over that connection.
ql-mix said:
Im already connected over wifi. Signal stength is fine. I just cant use the internet over that connection.
Click to expand...
Click to collapse
I've seen sometimes that even if your settings are fine it doesn't connect to
internet with power in battery best. Don't ask me why.
What are your settings under connections? Internet or work and so on?
halloj said:
I've seen sometimes that even if your settings are fine it doesn't connect to
internet with power in battery best. Don't ask me why.
What are your settings under connections? Internet or work and so on?
Click to expand...
Click to collapse
I'm pretty sure it's due to lack of assignment of DNS servers from the Acesspoint you are connecting to.
You should try to manually setup DNS servers for the connection. There are plenty of free ones, google it.
battery setting: tried best performance, no difference
Internet or work: tried both with same result
DNS: changed setting on wifi adapter: dns: 208.67.222.222 alt dns: 208.67.220.220, still no internet for me
What should i try now?
Still didnt get it to work, please suggest me something.
ql-mix said:
Still didnt get it to work, please suggest me something.
Click to expand...
Click to collapse
I also had trouble using WLAN. In the end it seems, that the wlan connection was not the preferred routing, and nearly all data still flowed over the mobile connection. When using WLAN I always have to terminate any existing mobile data connections (Tap on the icons on the top, then on the data connection-type icon, e.g. stylized G for GPRS and then disconnect in the pop-up).
The weird thing is, that not all data went over mobile. DNS-Requests where sent over WLAN, but connections to webservers where routed over the mobile connection. Seems to me like a bug, as you would normally expect that all traffic is routed over the wlan once a connection is up an running.
Magnus
What is the standard of your W-LAN? Is it 802.11b? Mine does not work with 802.11b but is working fine with 802.11g.
Wo use just WEP. The router cant do more.
I dont use any mobilde data connection, way to expensive with my provider.

How to share internet connection from laptop to G1 over USB

If it possible, How to share internet connection from laptop to G1 over USB ?
Please suggest, Thank you.
What you want is called tether but in this case wired tether which is in most ROMs here
To save some time here I did the search for you:
http://www.google.com/search?q=goog...s=org.mozilla:en-US:official&client=firefox-a
App can also be found here:
http://www.google.com/url?sa=t&sour...-VeUervA-3nhoOPHw&sig2=frKeWlUjbLrh_RZxnvxG4Q
Ace42 said:
What you want is called tether but in this case wired tether which is in most ROMs here
To save some time here I did the search for you:
http://www.google.com/search?q=goog...s=org.mozilla:en-US:official&client=firefox-a
App can also be found here:
http://www.google.com/url?sa=t&sour...-VeUervA-3nhoOPHw&sig2=frKeWlUjbLrh_RZxnvxG4Q
Click to expand...
Click to collapse
Actually I think he's looking for the inverse, which I've seen people look for before. I don't think I've seen a solution though.
I think he wants to do the oposite. Use the internet connection that his laptop is already using so that his G1 gets internet.
If that's the case, then please pass your phone to the nearest person and go read some internets...
benmyers2941 said:
Actually I think he's looking for the inverse, which I've seen people look for before. I don't think I've seen a solution though.
Click to expand...
Click to collapse
Question is, why would you want to? Only reason I can seem to think of is if the laptop/desktop is connected through a wired connection, meaning you have no wifi at your house. If you do have wifi, and your laptop is connected through wifi to your ISP, then your phone can also connect with it's wifi adapter to the same AP.
jubeh said:
I think he wants to do the oposite. Use the internet connection that his laptop is already using so that his G1 gets internet.
If that's the case, then please pass your phone to the nearest person and go read some internets...
Click to expand...
Click to collapse
Wow I just assumed he wanted to use the phone as a router.
I was sharing internet through BT and Wifi for some time, but did not succeed to do it over USB. Beside there is one big problem: even if you will set everything on linux level and have internet in your phone, Android will not know about it. So apps which don't make checks for internet connectivity will work, but these which do, will be waiting for internet. I've found some workarounds, but that problem is really frustrating.
oonaon said:
If it possible, How to share internet connection from laptop to G1 over USB ?
Please suggest, Thank you.
Click to expand...
Click to collapse
Go here, I've done it sucessfully with a Ubuntu Host.
and you're welcome
http://forums.t-mobile.com/t5/Opera...8;jsessionid=357ECABC017E2171FA4A9541867E2479
jubeh said:
Question is, why would you want to? Only reason I can seem to think of is if the laptop/desktop is connected through a wired connection, meaning you have no wifi at your house. If you do have wifi, and your laptop is connected through wifi to your ISP, then your phone can also connect with it's wifi adapter to the same AP.
Click to expand...
Click to collapse
For some people as in my case, wifi and/or cellular sometimes is not an option.

WIFI not work X8 - ?ROUTER settings? !

Hi guys!
I have problem,that my wifi won't work. It's connected but there's no internet connection. If I change security, i get wifi connection but after few minutes,I lost internet connection but wifi is connected. Same problem on my father HTC WILDFIRE S.
On my laptop wifi works well.
I search on web and there are some people having that trouble,but I didn't find solution. I don't want to use static ip,because I lost router connection,I must use DINAMIC IP for working router.
My router adress is 192.168.2.1
Help me what settings I must to set,change in my router settings. I attach photos from broadband router what settings I have set! Please attach your settings that I can set this on my router. I wan't my normal wifi back.
Thank you all!
Fix
Hey there 2010matej.
What router are you using? I have had similar problems that I fixed. Also, some friendly advice would be taking your internet IP off the thread. It can be useful for some people with less favorable intentions.
Also, I'm not sure if it is XPERIA X8 specific.
EDIT: Have you paid this month for internet?
Deftone said:
Hey there 2010matej.
What router are you using? I have had similar problems that I fixed. Also, some friendly advice would be taking your internet IP off the thread. It can be useful for some people with less favorable intentions.
Also, I'm not sure if it is XPERIA X8 specific.
EDIT: Have you paid this month for internet?
Click to expand...
Click to collapse
Router: Canon CN WF514:
I have this problem for so time. Yes we always paid for internet!
Ok. I have asked a friend of mine he said that there are a few ways to deal with this problem:
1) A hard reset. Just use a pencil or pen to press the reset button. Hold it there for 4 seconds and the rooter will reset. This will make you start as if from the beginning.
2) Check for any 'broadcast' settings. Enable any that have been disabled.
3) Disconnect any wires and power plugs then clean them and reconnect them.
I'm sorry if this does not work. I have tried quite hard to help but unfortunately this is all I got. My friend also gave me the link to this manual just in case.
http://www1.canyon-tech.com/files/Canyon/Networking/WiFi_U/CN-WF514/CN-WF514_manual.pdf
Hope it helps
Thanks for reply. I hard reset router last because I can't go to 192.168.2.1 router web page,but when I reset wifi start working. I just again set security. Maybe is problem in security,but wifi is SLOW
2010matej said:
Thanks for reply. I hard reset router last because I can't go to 192.168.2.1 router web page,but when I reset wifi start working. I just again set security. Maybe is problem in security,but wifi is SLOW
Click to expand...
Click to collapse
Internet is slow at night so maybe this is the problem. Otherwise, try changing your channel. You may get better results. Go to speedtest.net and test your speed. Then come back. Also, connect the wire from router to laptop and it will be faster.
Hit the thanks if I helped anywhere.
Deftone said:
Internet is slow at night so maybe this is the problem. Otherwise, try changing your channel. You may get better results. Go to speedtest.net and test your speed. Then come back. Also, connect the wire from router to laptop and it will be faster.
Hit the thanks if I helped anywhere.
Click to expand...
Click to collapse
It's not that. Wifi on laptop is fast,just on x8 is slow. When I go on weekend to Croatia,where is internet very,very,very slow on laptop,is fast on x8,WTF!
Good to hear you fixed it anyway.
Deftone said:
Good to hear you fixed it anyway.
Click to expand...
Click to collapse
I didn't fix it . Fast on laptop,slow on x8 or no connection!
i think your problem is based on PPPOE connection type.
thing you do is you connect to your wifi but not to your operator.
THINGS YOU HAVE TO DO:
->go to http://www.torrapk.com/download/apps/WIFIPPPOE_v1.0/WIFIPPPOE_v1.0.php and download wifi pppoe apk
->install (root is needed).
->NOW connect to your wifi as usual.now when icon is displayed open the pppoe apk and insert your opereators username and pasword.(probably same as on your computer/laptop)
and DONE
glad to help
Lukenda said:
i think your problem is based on PPPOE connection type.
thing you do is you connect to your wifi but not to your operator.
THINGS YOU HAVE TO DO:
->go to http://www.torrapk.com/download/apps/WIFIPPPOE_v1.0/WIFIPPPOE_v1.0.php and download wifi pppoe apk
->install (root is needed).
->NOW connect to your wifi as usual.now when icon is displayed open the pppoe apk and insert your opereators username and pasword.(probably same as on your computer/laptop)
and DONE
glad to help
Click to expand...
Click to collapse
I don't think that is needed at all.. Some routers are really cr*p when WPA2 encryption is used..
I'd try setting it to WEP and trying again.. If it's better, then proceed to MAC allow your devices so your network is secured.
Set the wireless channel to 11 for a strong signal too.
Then in advanced wireless settings on your x8 make sure that NEVER is selected as the sleep policy.
Remove your router in your x8 wireless settings and then set it up again..
Good luck!
Sorry I was under the impression that it wasn't working before at all and now it is. Will read further in future but I have to say that I can't refute or build on lukenda's advice.
I hard reset router again,I didn't set security,but wifi won't work on phone. I don't want to install apps to have working wifi,because I didn't have problems 2 months ago ! And my channel is set to 11!
Lukenda said:
how do you know?
been in this situation?
i have.
i am almost 99% sure the problem is going to be solved by my way.
we are in the same region.
slovenia-croatia.
Click to expand...
Click to collapse
Calm down man. No need to oppress. Great you have experience. Fine. You submitted your advice now just wait for a thanks or further problems. No need to start hate. I thought your advice was great.
2010matej said:
I hard reset router again,I didn't set security,but wifi won't work on phone. I don't want to install apps to have working wifi,because I didn't have problems 2 months ago ! And my channel is set to 11!
Click to expand...
Click to collapse
it is only one app and i use it too.
try.
if it is not working check your wieres on router.
2010matej said:
Man what settings you have in your router? Send me photo,you can PM me! I don't want install apps,I want to get back same settings when my wifi works like a charm! I reset settings,router,nothing help ! I don't have PPPOE! I have dynamic ip,on other settings I can't open router page!
Click to expand...
Click to collapse
are you able to connect using your computer or laptop?
show me screnshoot of conect-to.exe
Lukenda said:
are you able to connect using your computer or laptop?
show me screnshoot of conect-to.exe
Click to expand...
Click to collapse
Yes I'm connected on PC and on Laptop,screenshoots is attached on first post!
2010matej said:
Yes I'm connected on PC and on Laptop,screenshoots is attached on first post!
Click to expand...
Click to collapse
kinda dissapointed,not pppoe..-
okey.
try to set static ip from your android.-
go to wirelles ,wifi settings,advanced,and add static ip.(your own) =)
Lukenda said:
kinda dissapointed,not pppoe..-
okey.
try to set static ip from your android.-
go to wirelles ,wifi settings,advanced,and add static ip.(your own) =)
Click to expand...
Click to collapse
Like I'm saying,just if i set dynamic ip my wifi works. If I set static ip,PPPOE,... I can't open 192.168.2.1 anymore or I just don't have connection not on phone not on laptop,pc!
What to set in PPPOE? I'll try to set pppoe tommorow!
THX for helping brate!
well use your usename and password as on computer (if u have one)
-razumijes hrvatski?

Categories

Resources