Using the td2 for an internet connection for a laptop - Touch Diamond2, Pure Q&A, Help & Troubleshooting

I'm trying to set my laptop up to use the td2 to get a connection to the internet. can this be done either via bluetooth wiFi or USB. I have tried to add a bluetooth network connection but the laptop keeps giving an error saying could not connect to the remote device.

When I plug mine into my laptop via USB, I get an option on the device to 'internet share'. Does this not happen for you? I'm not sure whether Windows Mobile Device Center is also needed, but it may be!

I did this today using a Macbook. The USB did not work on the Mac but Bluetooth did. I had to connect to the phone from the computer using ordinary bluetooth first (without network). Then I had to choose Internet Connection on the phone using Bluetooth PAN - which I assume is Bluetooth network. Also had to select Bluetooth PAN on Macbook - was a bit fiddly but it worked. Anyway it does work with USB on the PC see post 16 of the thread here.

cheers both, i will check out the other thread but when I connect the phone via USB to this (work) laptop, I get nothing. My home one uses Vista and Mobile Device Centre, but my work one uses XP.

typically, after a reboot the phone gives of the option to shart internet sharing but the laptop wants to install a rndis connection, but the only way to do this is connect to internet. ironic.

Ok, finally have a proper Interenet connection and downloaded Activesync 4.5 from MS. This looks like it will resolve the situation.

Related

internet connection sharing

has anyone tried internet connection sharing via HSPDA to a PC using activesync or bluetooth yet? any issues?
I use USB/ActiveSync and it works fine.
Just follow the manual. I followed it and got no problem.
One thing though, in the manual, it said "execute 3gnetopt.exe in the PC to optimize it for 3G connection".
It seems, after that it changed the routing automatically and can slow down your internet connection when not using the ICC via PDA.
Well, that's easy, just disable the "additional" network interface in the PC.
i could get the usb internet sharing to work but bluetooth internet sharing doesnt work. my pc is able to detect a local bluetooth pan network without internet access. anyone got their bluetooth/internet to work?
I have internet sharing working via bluetooth on a tablet and laptop (both running XP). First I tried DUN and it worked which suprised me. Then I set up a PAN connection and got Internet sharing running. After that DUN will no longer work, it looks like it trys but then fails. But Internet Sharing is faster and works fine over bluetooth.
It can be tedious at first, you need to create a BT PAN Connection on the PC, you need to create a BT partnership with the Kaiser in your Bluetooth manager on the PC. You need to set the Kaiser's Internet sharing to "Bluetooth PAN" and have the Network connection set to go to your ISP's GPRS internet AP.
Once I have PAN setup on the PC, it's showing "Network Cable Unplugged"
I then Start the Kaiser's Internet Sharing and press connect, it starts a GPRS connection.
I then open the Bluetooth Manager on the PC, select the Kaiser's Connection Icon, right click and select connect.
Then the two devices connect and I'm off and running.
With 3G I have been able to answer calls and talk on my Jawbone BT headset while still connected to the PC via BT as well, pretty much MAGIC
bluetooth still cant work with those instructions, i'll just stick to USB for now.
how do I ensure that HSPDA is working and its not just 3G?
My 3G icon changes to H when it connects hi-Speed. I'm wondering what Bluetooth Stack your PC has, I had issues with my tablet and Hermes until I got new BT Drivers from Fujitsu support. Your PC may need updated BT profiles? My laptop is Dell (uses a Toshiba BT Stack), the tablet is Fujitsu (also Toshiba BT Stack). Just a thought.
On the Plus side, using a USB cable will keep the phone charged, which is good because HSPDA is a power hog anyway.
i'm using a bluetooth dongle with my PC running vista
Both USB and BT ICS work great for me. I've used it on Edge, 3G, and HSDPA.
Both USB and BT ICS work great for me. I've used it on Edge
Internet sharing only working on 2G and not 3G
I am connected right now via internet sharing using my USB cable. However, this is working only if I have a 2G signal showing on my tytnII. When I am in a 3G location, the internet sharing program sits with the message "waiting for network"....this is just after the message "checking USB cable".
I have tried many things including a hard-reset, not having a full sync relationship between the PC, just connected etc. All to no avail.
I am using a new Dell laptop running Vista Ultimate.
Unlike previous PDAs I've had, I don't know a way to force the tytn II to stay on 2G, so when I am at work in a 3G environment, I cannot get internet sharing to work.
Help!

Internet through usb cable.

Hello all.
I have googled, searched xda and tried all to get internet sharing to work, via usb, but fail all the time. It is supposed to just work but does'nt. For me.
Any help please?
regards
settings->connections->connections->advanced-select network
choose my network or whatever the native network profile is called
rather then my isp or whatever your isp profile is called
should mean that when your phone is connected to activesync
or vista's sync tool
it gets the same network as the computer you're connected to
make sure you have synced your x1 with the activesync software that comes with it then try it make sure you got signal aswell cuz it will not connect without. i use vista and it connected fine it just added another network to the ones i could connect to and obvusly it was the phone so i saved it that way when i plug it in it works straight the way. hopefully this helped
just plug it in and start internet sharing on your x1
Probably want to check your PC network status>>properties>>Advanced and check on "Allow other network users to connect...."
And go to X1 settings>connections>usb to pc and clear(if any) check mark on the 'enable adv network' if having problems.
Are you trying to connect your PC to the Internet through your phone or your phone to the internet via your PC?
doesnt necessarily belong here but since people are reading this thread - how can I do the following:
My laptop is connected to landline broadband connection via cable. Now I want to start a wireless network on my computer and let my xperia connect to. When connected to the laptop ... I want the xperia to be able to use the laptops internet access as well be able to access files that I have given network permission to e.g. movies for example.
There has got to be a way of doing this. So far all i can do is create a wireless network and let my xperia connect to it .. however nothing happens after that .. I cannot access files nor the internet on my xperia
so anybody an idea how to do this ?
thanks
I think you might need a Wireless Access Point for this, although I could be wrong. I have personally never tried it, as I haven't played around with peer to peer wireless networks.
I have an Access Point at home connected to the DSL, my laptop and my X1 both connect to it and access the internet, and that works perfectly.
Sorry I am not of much help.
just create an ad hoc connection on your pc it will appear on the network list on the xperia in the properties of the ad hoc connection tick share internet or something similar
Sharing internet connection with x1
Hello guys! I need to connect my X1 via USB with my notebbok, to share the WiFi connection. The problem is that my X1 has an IP with 192.168.1.102 Ip, (From wireless), but when I connect it via USB to my PC its tooks an IP with 162.85.2.2 Ip Address.
I configured it manually, but still wont navigate trouth internet.
So I don't know hoy to configure my connection to have the same IP range with my phone from my PC.
I searched all over XDA forums, but I didn't find anything-
Please somebody can hel me please?
Regards!
Charly!
Active sync issues the IP when connected via the usb cable, leave it as it is. (ie my home wireless network for the laptop / pc / xbox etc is 192.168.0.xxx but the phone when connected to the laptop is 169.254.2.x and active sync does the routing or something). Then do what the others said about allowing the phone ot connect to the internet via active sync and it should work.
net coonectin
hey....i using SE x1i
I need to help for to connect mobile with laptop. No one pc suite are working, when i connect via USB cable i getting error of "your USB not recognize" I tried with various PC suite but nt getting success..My Laptop OS wind8 Plz help me any one....

Gremote Installation / setup Issue

Hey guys , so i have a netbook with bluetooth (lenovo S10) and my HTC touch Pro. I wanted to control my netbook with myphone using Gremote either via bluetooth or wifi.
First, i tried the bluetooth method. I followed the instrution at the main site and got all the way until i have to setup a PAN in my netbook. However i couldn't find any option to setup a PAN so i couldn't control my netbook with myphone via bluetooth.
Then i proceded to create an ad-hoc wifi network from my netbook. I made it's SSID and then set it as not using any encryption and the network key is automatically provided by windows. My phone detected the network and connected successfully to it. Both had ip's for within the network. Now the Gremote server is already running in my computer. I started the Gremote app in my phone and then went on to create a profile. When i press the FIND button (to search for the ip address) it says couldn't find ip. However in my netbook, The Gremote server shows in it's log file that it received request search from [my phone's ip here].
What is wrong? My netbook seems to be detecting my phone attempting to connect to it but the gremote app on my phone shows that it couldn't find anything?
P/s: I've tried manually key-ing the ipaddress and it didn't work.
Ive had that issue before and other issue with the app. Its strange, one day it will just start working.
For the bluetooth, make sure you have a serial port open, but i have yet to see a bluetooth stack on a PC that doesnt have an option to activate PAN.
With the wifi, you said you manually keyed it in, are you getting that IP from the status page on the gremote server app? make sure you have that port open as well, i think its 5656 or something.
you should try to
1. connect to your PC using a router
2. Drop the wep encyption on your adhoc connection
3. use a static IP for your PC
4. have your phone connected to the wifi connection for atleast 20 seconds before you try to initiate control with gremote.
ive used gremote on 2 laptops and a PC. the PC is my home PC which is the only one that has given me an issue. Regardless, it works now. One day it just started working. on the PC i can use gremote through my router wifi, adhoc connection straight to it, or bluetooth pan. On my laptop i use it through router wifi and adhoc without ever having an issue. on my sisters laptop ive used it with a adhoc connection......still no issue.
Keep messing with it. The only problems ive ever had seemed to have worked themselves out after a couple days.
Thanks YL Groper. Actually about 2 nights ago, i was playing around and it most certainly worked suddenly.
I made a standard Ad hoc network (open without encryption) and let it run. However my computer couldn't detect the network (which was created from the computer). Then i input the SSID to my Touch Pro, and it found the network. After being connected to the network, my computer found the network as well and begin to connect to it. Once it got the ip, my phone could retrieve the ip from the computer and now i have no problem

Access Internet on Kaiser via PC

Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Not sure that Internet Connection sharing in WinMo supports that...just wondering, why the heck would you want to surf the web on a 2.8" screen when you have a full PC available to you?
You can use the remote desktop facility via wifi. But as previously posted... why?! Bluetooth doesn't support a high enough datarate for it to work properly.
Connection at my location is 3G at best so bluetooth is defininitaly fast enough to accomidate my needs just simple stuff.
metalman0581 said:
Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Click to expand...
Click to collapse
The best way to get the connection on your kaiser throught the pc is when you connect it using the USB and being connected to the active sync on your pc besides there are no settings need to be made for using this way. I'm not sure if you can connect the kaiser to you active sync on the pc through the bluetooth.anyway let me try it and if anything pops up, i'll let you know
Nope, no additional software required. Just go into Start - Programs - Internet Sharing. Hit connect and connect up your USB cable and you're done.
_Wait for ActiveSync to connect and then exit the programme._________________
Max confusion
What a jumble this thread has become . The O/P wanted to access the internet that's already on his PC and channel that through his TyTN II - NOT the other way around. As already mentioned in one post, one way of getting this is via an Activesync (or WMDC if it's Vista or Win 7 on the PC) connection. For greatest speed this would be via the USB cable but it is possible to have an Activesync or WMDC connection via Bluetooth for greater mobility if there's a need to carry the phone up to 10 m from the bluetooth hub. The other (more straight forward) way to do this is just to connect the phone via WiFi directly to the landline/broadband router (assuming there is a WiFi capable router avail).
Internet connection sharing is only for when the phones internet connection eg GSM/3G or HSDPA is feed to a desktop PC (say if the landline/broadband connection is down). In the O/Ps second post, the reference to Bluetooth speeds made it look like this was what was being saught.
I have done all of these with my TyTN II and had things working well in each case.

Internet sharing

Hi,
i have a poorly laptop awaiting repair. no wifi or lan working.
as a temp measure, i can connect my kaiser to the internet via my wireless router.
i can then connect the kaiser to the laptop with usb, but how do i share the connection?
only options using internet sharing on windows mobile are through gprs, which is no good.
laptop has windows 7.
why dont you DL the WLAN drivers for your laptop on your tilt. then copy that to your laptop and get your wifi working instead?
thanks hispanomlz, but like i said, laptop networking is broken awaiting repair
i have all the drivers.
i want to use my kaiser as the modem, but with it connected to my router wirelesly and to the laptop via usb.
i.e wireless modem -> kaiser wireless -> kaiser usb to laptop, then laptop shares the connection
just checked in the networking forum, and i think i need wmwifirouter
http://forum.xda-developers.com/showthread.php?t=357152
will give that a try later
gazzacbr said:
just checked in the networking forum, and i think i need wmwifirouter
http://forum.xda-developers.com/showthread.php?t=357152
will give that a try later
Click to expand...
Click to collapse
WMWifirouter turns your phone into a wireless router. If your wireless isn't working on your computer then it will not work with wmwifirouter..
I don't think you can connect to wifi and then internet share the connection. It will only work on the phones cellular data.
well, wmwifirouter is the dogs wotsits.
worked like a treat.
connect phone wifi to my wireless router.
connect phone to laptop with usb.
click on wmwifirouter->wifi to usb and it disconnects activesync and connects laptop to internet.
job done.
well, still have to get the laptop repaired sometime though
wow, I sure didn't know it worked backwards.

Categories

Resources