Database Develop

Trying to Arabize WM2005 on BA

After succesful upgrading to WM2005, I tried to install the 2 arabic files extracted from EXT ROM (which I think are responsible for Arabizing) "Default_AACERT_arabizer.CAB" and "Default_ACERT2_arabizer.CAB". After installation and softresetting, the device acts wierdly, and.... There is NO Possible Way to get it running again without getting into "Bootloader Mode". Did any one manage to do that? and I couldn't get into the xetended ROM of WM2005....did any one succeed?

you cannot use any existing localization packs on WM5

well it workedfor me on himalaya
http://forum.xda-developers.com/viewtopic.php?p=160111#160111

Dear friends,
I tried my self also...but all in vein....that was 1st reason to downgrade to Win2003 SE...
I wrote an email to imaginet one month ago, they replied " we are trying hard to upgrade and soon you will have an upgrade"...I don’t know what it means by soon...months or years???????????....since they never upgrade after 2003... :twisted: :evil:

i will attach 2 options for arabizing... people managed to get them working... i didnt know however (still new at these things) so if are able to enable any of them please tell me how

file 2 (updated arabizer ripped from jasjar) i even tried installing the first then updating with this...
i tried everything
i cant seem to get it to work, while others have and are not willing to show me the way
i cant upload it cause its too big even after partitioning
so i will try from a different place cause i cant use ftp here

mebonkers said:
file 2 (updated arabizer ripped from jasjar) i even tried installing the first then updating with this...
i tried everything
i cant seem to get it to work, while others have and are not willing to show me the way
i cant upload it cause its too big even after partitioning
so i will try from a different place cause i cant use ftp here
Click to expand...
Click to collapse
mebonkers
Check this link. There's a detailed explanation on how to do it. However, some claim that it didn't work for them. Good luck.
http://www.ce4arab.com/vb7/showthread.php?t=41334

did that
still nothing :?

mebonkers said:
did that
still nothing :?
Click to expand...
Click to collapse
Can you explain what is "nothing"? I did it my self last night and it worked. The only drawback is there is no Arabic keyboard. However, they clain that if install that dictionary..it works. I'll have to try it.

Arabizing is possible with wm5 and blue angel
I can arabize my xda iis with the following programs in wm5 (maimach patched rom) if you use the standard rom it locks the blue angel...you must extract this paste the nb file to ph20b if you have xda iis, if u have a siemens it is the other folder..reflash the rom:
imaginet Dictionary working
Imaginet reader working
Arabizer 1.3 working and stable
sidenote:
imaginet handwriting reader working well in 2003se. Works in 2005 however when the mobile goes into standby mode if unused say for 5 minutes pressing the power button will not open the blacklight, only a reset resolves this. In the end this is the only one i have not got working yet.
Finally, make backups every step of way with a program like sunnysoft 3.3 or above, unlike sprite this is compatable with wm5.

Dear friends, I am still trying to install properly arabizer on wm05.
I couldn’t install Arabic –English dictionary and prayer timings.
If you install above mentioned files without AR-Eng dictionary, Arabic key board will not install, but if you get file from following link, named “United Arabic Cab.rar, its worked fine for me and I was able to get Arabic key board without installing ar-eng dictionary. hoping it will be helpfull for you.
http://forum.xda-developers.com/viewtopic.php?t=29156&postdays=0&postorder=asc&start=25

Can't reinstall QuickGPS

I uninstalled QuickGPS (stupid move, in retrospect) and now want to reinstall it. I downloaded the HTC_QuickGPS cab from Dutty's site but get this error message when I try to install it: Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
I am not a developer or a techie. I searched this forum for 'reinstall QuickGPS' but didn't find anything.
I'm also thinking of doing a hard reset and not loading the AT&T bloatware but there are a few programs from it (especially GetMail_at_t) that I want and am wondering if I'll get the same error message.
Thanks in advance for your help.

Have you soft reset? I get that message when another program is still in memory (Comm Manager, etc.). Additionally, I HIGHLY recommend hard resetting and not letting the bloatware install. Just did that for my buddy's tilt and he saw a HUGE performance gain. Anything you like from the bloatware is available on this forum as a cab. I understand not being comfortable voiding the warranty by ROM flashing (although that makes a far bigger/better difference). However, the bloatware sucks pretty bad. Plus, then you're sure QuickGPS is installed correctly, etc. I will say, he had a data issue after the hard reset. If you do it and have trouble with your data, assure your ISP settings are correct.

Just FYI: Sucks when no one post their results.
I was having the same problem and the soft reset worked. Thanks Guilf.

Worked for me too soft reset n it installed thanks

slightly different problem
im using Medkid's ROM. with radio version Radio version - 1.65.24.36. this ROM doesnt have QuickGPS pre-installed, so i had to download the cab file and install, but this is what i get,
it seems to install, but when i try to run the program, i get an error message saying
"the file QuickGPS" cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
i have tried reinstalling, not worked. i even tried a QUICKGPS patch i found on the internet, which contained a quickgps.reg file and a quickgps.exe as well. DID NOT WORK EITHER>
any suggestions?

try this one out HTC QuickGPS 1_00_220821_00.cab

i know this is a little late but i had the problem now and i fixed it
here is what todo:
eventhough i uninstalled quickgps and the program was not in the program list, it was still running a process, so i used SKTools to 'kill' the process, after that i was able to reinstall QuickGPS...

Guilf said:
Additionally, I HIGHLY recommend hard resetting and not letting the bloatware install. Just did that for my buddy's tilt and he saw a HUGE performance gain. Anything you like from the bloatware is available on this forum as a cab. I understand not being comfortable voiding the warranty by ROM flashing (although that makes a far bigger/better difference). However, the bloatware sucks pretty bad.
Click to expand...
Click to collapse
Agree fully with the above. I flashed my TILT with a barebones HTC Rom (bengalih's BRR-HTC-2.0 Lite ROM), and the device just FLIES compared to the out-of-the-box AT&T setup. The ROM developer included a separate file with all the removed apps available as .cabs, so I installed just what I wanted.

srsaleenstang said:
try this one out HTC QuickGPS 1_00_220821_00.cab
Click to expand...
Click to collapse
Link not working. Can you attach to this forum?

FormerPalmOS said:
Link not working. Can you attach to this forum?
Click to expand...
Click to collapse
Here you go

but QuickGPS will works with external GPS ?? (i have htc Wizard)

thanx dude

Anyone tried TickerTape 0.5.1 in Fuze w/ stock ROM?

Colleagues,
I have tried running TickerTape on my Fuze with a stock ROM. It installs fine but when I run it, it says that it needs a newer version of .NET. However, I have .NET 3.5 installed.
Have you been able to run it successfully in the same configuration I have?
Thanks in advance.

I have TickerTape-0.5.1.cab installed to my SD card, on stok rom, and it works fine. I did nothing special to make it work. Maybe uninstall, reset, reinstall TickerTape-0.5.1.cab? Or maybe do the same to the "MS .NET CF v3.5..cab". Just a shot in the dark.

OlSarge said:
I have TickerTape-0.5.1.cab installed to my SD card, on stok rom, and it works fine. I did nothing special to make it work. Maybe uninstall, reset, reinstall TickerTape-0.5.1.cab? Or maybe do the same to the "MS .NET CF v3.5..cab". Just a shot in the dark.
Click to expand...
Click to collapse
OlSarge,
Thanks for your assistance.
I uninstalled TickerTape and .NET 3.5 but when I tried to reinstall .NET back it gives me a message saying "the .NET Compact Framework version you are attempting to install already exists in ROM".
I am at a loss.

jdomi99 said:
OlSarge,
Thanks for your assistance.
I uninstalled TickerTape and .NET 3.5 but when I tried to reinstall .NET back it gives me a message saying "the .NET Compact Framework version you are attempting to install already exists in ROM".
I am at a loss.
Click to expand...
Click to collapse
You need to flash a cooked ROM. The stock ROM blows. Take a look at this one:forum.xda-developers.com/showthread.php?t=467592

Installing a different ROM will void the warranty.

jdomi99 said:
Installing a different ROM will void the warranty.
Click to expand...
Click to collapse
Rules can be bent without being broken...

Install netCF 2.0! Yes 2.0 because 3.5 does NOT include all features of 2.0
Solved almost all my netCF problems with cooked 3.5.

tyguy said:
Install netCF 2.0! Yes 2.0 because 3.5 does NOT include all features of 2.0
Solved almost all my netCF problems with cooked 3.5.
Click to expand...
Click to collapse
tyguy,
The problem is that most programs need 3.5.

Issue solved: here is why I could not reinstall .NET 3.5: When you first install 3.5 the instructions tell you that at the end you need to change the registry so that 2.0 is turned off (with a 0) and 3.5 is turned on (with a 1). If you uninstall 3.5 the registry is left untouched, meaning that 3.5 is still on; that's why the message that the version already exists. So, I had to go in, reverse the registry: turn off 3.5 and turn on 2.0; now I was able to reinstall 3.5 successfully.
After this, I was able to install and run TickerTape successfully.

netCF in general
@jdomi99
Though this worked for you there is still an issue.
If you look at the SDK and SPs for 2.0 to 3.5 you WILL see that 3.5 is NOT a super set of 2.0 (meaning including all 2.0 features plus 3.5 additions on top).
They can and will co-exist without negative performance issues so installing both doesn't a.) harm anything and b.) wont slow your device down. Though 2.0 is slower, applications will pull the required parts which may be 2.0 or 3.5.
That's at least how our dot net developers explained the issue.
BTW there is a little software tool to change the settings via an application instead of modding the reg. Unfortunately I do not have it anymore (would appreciate if one could post it).
Edit:
Found the little app in the Lumos thread (see attached) there you can assign general policy and even which app uses which .net version.
Install and you should find it as first listed program under Programs.

Xbmode cause manilla.exe to crash. urgent!

Im so sorry, im not the kind of person that makes treads and post them as urgent. But this is truly urgent.
I have .net 3.5 cf installed on my phone, i then installed xbmod policy.cab and restarted. Disabled tf3d, installed XBmod VGA Rhodium Manila.cab, rebooted and installed HTC New Contact Card.cab. Once again i reboted, installed Start menu fix.cab and the reboted again. Then i enabled tf3d.
But it all crashes everytime! Manilla.exe crashes and gives a report
'Microsoft.VisualBasic recources not found.
Please im going away and i really need the phone to be working.
I also have sdkcerts installed and i have pressed the reset button with the stylus a couple of times

I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?

band27 said:
I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?
Click to expand...
Click to collapse
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.

pking said:
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.
Click to expand...
Click to collapse
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....

Arju007 said:
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....
Click to expand...
Click to collapse
Thats the fun part. Ive done that two times now :/

pking said:
Thats the fun part. Ive done that two times now :/
Click to expand...
Click to collapse
Many members went through this already. Learn from their mistakes ......PRESS HERE

If you have an original ROM then it may be that you don't have NET 3.5 Framework, yes?

yeah that must be it... lol ... hope that's his answer.. i remember my stock rom didn't have that but all the custom i've used has it cooked in..

Just go "Cooked" and you will never go back...lol
We can set up a day where I will help u through if you wish...

You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.

pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
tf3d today plugins
Is it all correct?
Click to expand...
Click to collapse
No matter how many times you do this, it won't work without Netframework 3.5.

band27 said:
No matter how many times you do this, it won't work without Netframework 3.5.
Click to expand...
Click to collapse
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?

pking said:
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?
Click to expand...
Click to collapse
Regardless of what language your ROM is, will not impact your devices ability to install manila 2

pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.
Click to expand...
Click to collapse
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..

jonorb said:
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..
Click to expand...
Click to collapse
No freaking difference. This has driven me mad.

is there any way to install Microsoft NET CF 3.5 on touch pro?

I have tried many methods posted on this website, i am currently using a romeos rom 6.1 1.971.....it is getting very frustrating now, all i am trying to use this program for is Gremote......any suggestions would be greatly appreciated and i tried to install Microsoft NET CF 3.5 on touch pro it tells me i need more storage space and a support number 3....ANYONE PLEASE HELP MEE
I have renamed mscoree.dll to various things including mscoree.backup.dll and mscoree.dll.txt same issues, still cannot install this program, is there way around it so i can still install and work the gremote?

I've had this problem with romeos also and i searched through whole xda and i found this:
1. You should shut down manila.
2. Then soft reset.
3. Uninstall your old net. 3.5 if possible (program/remove under system settings)
4. Start a regeditor and delete in the registry this map: HKLM/Software/microsoft/.NETCompactFramework
5. Soft reset again and try installing net 3.5 again.
If it doesn't work repeat al this again and sometimes you have to try installing it twice times, and soft reset some more again and then remove again the registry stuff. and try install it again and again. It worked with me.
Hope it helps

sorry im a newbei i dont know how to shut down manila, how would i be able to do that, and where can i find a regeditor...thanks alot

Hey i got it!!!!!!!!!!!! THANKS A BUNCH

well i got it to install that was about it i couldnt really function it or where to fin dit on my touch pro, i then installed g remote that wouldnt work ...oh well i give up spent way too much time on this peice of s*&*^

I installed the .net on my touch pro and the only way you can tell if it is installed is if you go to start-settings-system-remove programs. There is a list of everything you have installed. From there you should be able to run programs that need the compact framework in order to work.