Hey all,
I currently have the original ROM Version: 1.19.61.1 WWE and i am trying to update the SPL to a HSPL so that i can use cooked ROMs, can someone tell me why this isnt working? I used the HSPL from the sticky thread on this forum yet it hasn't changed anything......do I have to hard reset my blackstone after doing this? I am getting the error [240]:FILE OPEN telling me to update utility.
Thanks
What type of operation system do you have? Is it vista?
http://wiki.xda-developers.com/index.php?pagename=RUU_Errors - doesnt really apply to HSPL package though for your error code?
I have XP does that make a difference?
sergioiacobucci said:
I have XP does that make a difference?
Click to expand...
Click to collapse
Should make it easier as you don't need to update vista drivers as you're using XP.
Have you followed cRaCKwHoRe's guide to get HSPL or USPL onto your device. Follow link to his guide in my signature.
ERROR [240] - When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again. Check that the contents of the folder is a CustomRUU.exe file and an .nbh file. If you put the os-new.nb file in by mistake instead of the .nbh, this is the error that shows up.
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
sergioiacobucci said:
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
Click to expand...
Click to collapse
well browse the threads of some roms n u can know the best rom for u..
ya once u fash a 6.5 rom all screen problems will be sorted out.
for radio version, they usually are not included on cooked roms
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
sergioiacobucci said:
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
Click to expand...
Click to collapse
well ya it has the radio n well no probs cos its the 1.14 radio..
all's good..
thanks for all your help much appreciated
Related
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.
EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled
attached spl in nbh format for flashing - breeimg.zip
Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze
at first try...
i have exactly what i descriped here:
http://forum.xda-developers.com/showpost.php?p=1253965&postcount=782
after the reboot i can't get into the bootloader...
what did you changed in the spl ?! or in the sspl.exe ??
I try... It's WORK!!!!!
what did you do??
edit:
ok, strange things goes on here ... just tryied it another time yet...
ipl-sspl by Des
SPL-1.01
should work
if i have time today i will try to made an cooked rom ...
if this works i look for a way to extract the files out of the excalibur wm6 rom ...
edit2:
i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...
i will try it now on a other machine..
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
THX
Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
doedoe said:
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
Click to expand...
Click to collapse
Hi, i work on it!!
on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!
i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!
....
can anyone else can try mtty with the sspl ?
-----
engel98 said:
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
Click to expand...
Click to collapse
this should work when you have a new spl installed - and you want to flash another cid rom!!
has nothing to do with unsigned code!!
!!! only for understanding!!
hey what should i say...
it just look like that it works...
i have cooked a rom now...
only small reg changes!!
i have flashed it with hermes RUUUpdaterV2
only a OS file!
Phone boots! now i have to check if the changes are taken over!!
But why not ;Þ
Please post to the wiki.
I am hoping that we can use tornado WM6 code to cook a WM6 image...
I just added some Infos to wiki!!
Updated:
Breeze/MTeoR Upgrading Guide (4Hard/S-SPL)
Custom RUU Updater
I can also confirm that this SSPL truly works, but I am still unable to flash 1.38 radio over 1.29 currently installed with this SSPL version.
Any hints when could we expect SSPL based on some newer SPL release (like 1.09 or 1.10)?
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
futureshock said:
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
Click to expand...
Click to collapse
Tried that 3 times already. Doesn't work! Although process finishes whithout any glitches, System Info still says Radio ROM 1.29.00, and my phone still acts like crap...
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
I confirm this is also work on my dopod 595.
Now I need to search how to change the splash screen
what would you want to change??
futureshock said:
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
Click to expand...
Click to collapse
This is what I did/have...
- I have installed Radio ROM 1.29.00.10 (with older 1.32.251.1 RUU)
- My MTeoR is CIDed QTEK_A07 - all available RUUs fail with INVALID VENDOR ID error
- If I use SSPL (linked in this thread), my MTeoR actually does start SuperCIDed and I can run any RUU or custom ROM, and although all of them complete with success Radio ROM DOES NOT CHANGE at all.
My theory is (based on posts in Hermes upgrading forum) that Radio ROM 1.29 installed Radio BL 0108 which in turn does not allow flashing Radio ROM when started SPL is pre-1.09 codebase. I presume that it flashes with 1.09, 1.10 or newer only (makes sense because HTC released new 1.34 RUU which first installs SPL 1.09, then the rest of ROM).
Can anyone concur with my assessment or am I completely wrong?
Ohhh,thank.It works perfectly on my HTC MTEOR from O2 Czech Republic.
sp3dev said:
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
SSPL V1 works successfully
CID check - disabled
NBH check - disabled
Click to expand...
Click to collapse
WOW
I have now read for weeks the Hermes/Trinity threads wondering if this would be possible for "simple" smartphones too - and you did it
So while it is possible for the MTeor, maybe your kind of patching the SPL would also work for the Excalibur/S620?
I would love to flash my O2 Cosmo, but want to have an original ROM Backup for warranty/fallback reasons.
I also found out that it is possible to extract and cook ROMs for it like the way for the Hermes - but I cannot flash because of this f****g need for signed .nbh.
May be you are able to do this MAGIC on a Excalibur SPL too?
I would try out on my phone if you want to take the challange - if it doesn't work I think I'll have to get a MTeor
Anyway - lots of thanks for your work - and giving me back my hope on smartphone ROMcooking
OK, so, here it is.
Download, extract, Donate!
your device *MUST MUST MUST* be synced with ACTIVESYNC and in WINDOWS MOBILE before starting the procedure.
All of you kind folks who pledged to the fund... please feel free to use my donate link </shameless_whore>
Cheers!
Olipro.
Hey Olipro
Nice to see this is up and running.
One Question....does it need to be in XP or can it be done in Vista as well?
try Vista and report back.
Vista worked for me
Vista worked for me
goes through alright (once drives are fixed up) however flashing any other rom still fails - even when manually going into the hard spl, and then running flash utility, it says the rom is corrupt.
Just the start?
ajajaj said:
Vista worked for me
goes through alright (once drives are fixed up) however flashing any other rom still fails - even when manually going into the hard spl, and then running flash utility, it says the rom is corrupt.
Click to expand...
Click to collapse
I guess that this means we need to now roll our own, or wait for someone to release a p3600i rom which uses this spl?
ajajaj said:
I guess that this means we need to now roll our own, or wait for someone to release a p3600i rom which uses this spl?
Click to expand...
Click to collapse
Did you try flashing a new radio ROM as well. Previously we could not flash anything other than the HTC Official ROMs including radios.
Radio Upgrade successfull
Andyc46 said:
Did you try flashing a new radio ROM as well. Previously we could not flash anything other than the HTC Official ROMs including radios.
Click to expand...
Click to collapse
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
ajajaj said:
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
Click to expand...
Click to collapse
I have an nbh from an existing rom, I want to change the 400 to 401 as referred to in other thread - can anyone offer context (where do i find the 400 specifically referred to?)
if I search, is it hex I am searching for, or ascii?
TIA
ajajaj said:
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
Click to expand...
Click to collapse
Well that is a good start.....which ROM did you try that came back as corrupt?
Andyc46 said:
Well that is a good start.....which ROM did you try that came back as corrupt?
Click to expand...
Click to collapse
I have tried the Trinity_WM6.1.Black_Edition.OS_Version_CE_5.2.19701_Build_19701.1.0.2_by_Akeo rom - this reports as corrupt.
Also, RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite - this one complains that the rom is for 128, not 256 MB.
等待中国高手的简体ROM
waiting 4 the writer 's CHS ROM
experiments in flashing
I modified the first instance i could find of 0x0400 the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite rom to 0x0401 and got a different error message saying:
Error [226] : FLASH WRITE
Flash write error happened. please check your PDA phone.
now the phone is now stuck in SPL
changed it back, and re-flashed, flash failed with "type error (128 vs 256)" however the phone now boots again.
tonychou said:
等待中国高手的简体ROM
waiting 4 the writer 's CHS ROM
Click to expand...
Click to collapse
No good to me...I am after WWE
ajajaj said:
I have tried the Trinity_WM6.1.Black_Edition.OS_Version_CE_5.2.19701_Build_19701.1.0.2_by_Akeo rom - this reports as corrupt.
Also, RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite - this one complains that the rom is for 128, not 256 MB.
Click to expand...
Click to collapse
That seems strange as the basic ROM for D810 (Standard Trinity) is the same for P3600i.....you would think both phones should accept cooked ROMs (now we have Hard SPL).
sigh. problem is that none of the roms I try will load...
By changing first 0x0400 in mary nbh to 0x0401, it flashes as far as 11% and fails with communication error, then when booting changes the inital start screen of the phone, (flashed to phone) but no further. saying the rom is corrupt.
SUCCESS
fully flashed the P3600i to WM6.1 - writing new thread to show how.
I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><
after reset the phone
nothing happened
What happened to me exactly the same as you!
money donated!
Thanks both olipro & ajajaj!
ok so i tried to do hard-spl. but i got a 260 error.. reset my phone, windows came back up.
this was from a xp sp2 machine :/
the crap thing is now i cant run any cab files on the wm device.. i've definately done something to do.
WARNING
This is a HTC test rom and was never given to the general public
Note the rom and radio version
This could be of intrest to cookers and rom hackers
http://rapidshare.com/files/1784304...9.405.2_Radio_52.46.25.26_1.08.25.23_Test.exe
I wonder if theres any difference in 3G bands.
This wouldn't be something i would want to just flash to right? I should wait for a rom cook? Is there a chance of bricking my phone trying it?
Anyone? Can i try out this rom on my phone without risking a brick?
The instalation brick at 13% for me, when i reboot, i have the tricolor screen of the bootloader so no problem to flash another rom but this one doesn't work for me
The SPL 1.14 olipro may be the problem?
Anybody have just the radio extracted from the ROM?
EDIT: I have modified the htcrt.exe tool and added blackstone to the configuration files. I will post the radio in a little bit.
AllTheWay
You are to cool
HDuser said:
AllTheWay
You are to cool
Click to expand...
Click to collapse
Well I tried to flash just the radio.
I got a update failed error.
Blackstone said:
00018003 BLACIMG.nbh - fail
Upgrade ROM code error Please try again
Click to expand...
Click to collapse
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Let us know.
Turb0wned said:
Let us know.
Click to expand...
Click to collapse
Everything is all good with the device..
Downloaded the WWE 1.19 ROM that cmonex posted. http://rs95.rapidshare.com/files/17....831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
All is well.
No luck with this rom then?
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
AllTheWay said:
Well I tried to flash just the radio.
I got a update failed error.
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Click to expand...
Click to collapse
stepw said:
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
Click to expand...
Click to collapse
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
cmonex said:
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
Click to expand...
Click to collapse
I tried to flash this radio once again. Radio fail 0x301 was set.
ICR
Hi there,
Is it possible to see if the ICR (in call recording) app is included in this rom like it was discussed in some other threads. They were talking about a test rom form HTC. And maybe could be extracted ?
Thanks
cmonex said:
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
Click to expand...
Click to collapse
Kernel is not loading, stuck in OEMInit if OS is booted from MFG SPL 1.07 loaded via USPL. Didn't try flashing it though...
Has anyone got this radio to work yet?
Not that I know of. Would like to be able to flash this radio.
AllTheWay said:
Not that I know of. Would like to be able to flash this radio.
Click to expand...
Click to collapse
People in Raphael forum have mentioned they tried it and high battery usage is the only "benefit"...
You dont meant that they tried it on the HD right?
For those who have not checked this out, there is a new ROM available on HTC website>India.
http://www.htc.com/in/SupportViewNews.aspx?dl_id=698&news_id=281
More details click on the above link...
ENJOY !!!
Downloading it now...will update about my experience with it !
EDIT: Faced an error while installing it....posted the details below...CAN ANYONE GUIDE ME HOW TO UPGRADE ROM PROPERLY
can anyone upload to rapidshare?
already posted 2 days back...
check here
http://forum.xda-developers.com/showthread.php?t=566483&page=3
Yes ! can you give a miror ?
http://rapidshare.com/files/2879222...9.707.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
Hi!!! Has anyone tried to upgrade the ROm as yet... Well I have tried and failed. I have HSPL 1.56 Olinex installed and have searched through the WIKI entirely but not gotten anywhere...
The thing is that wen i connect the phone and try to install the ROM, it goes into Bootloader and I get error 202 [Connection error]
I have searched the wiki, but for that error msg, it only says connect the device againa and make sure activesync is enabled...well i have already ensured all the things mentioned but still facing the same issue...PLZ HELP !!!!
blitzkrieg7710 said:
Hi!!! Has anyone tried to upgrade the ROm as yet... Well I have tried and failed. I have HSPL 1.56 Olinex installed and have searched through the WIKI entirely but not gotten anywhere...
The thing is that wen i connect the phone and try to install the ROM, it goes into Bootloader and I get error 202 [Connection error]
I have searched the wiki, but for that error msg, it only says connect the device againa and make sure activesync is enabled...well i have already ensured all the things mentioned but still facing the same issue...PLZ HELP !!!!
Click to expand...
Click to collapse
read carefully this topic.it really helps you.upgrade your hd through uspl 2.5 version.
link
http://forum.xda-developers.com/showthread.php?t=462347
No idea why HTC is releasing this rom now "OFFICIALLY" as they.
The rom date says 17th April, 2009 and this was available at http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe if I'm not wrong.
jatinder said:
read carefully this topic.it really helps you.upgrade your hd through uspl 2.5 version.
link
http://forum.xda-developers.com/showthread.php?t=462347
Click to expand...
Click to collapse
Hi ! Thx for the response, although could anyone tell me whether I can flash another rom even if I have HSPL 1.56 installed and overwrite it with USPL???? or how as I have read the thread mentioned int the above post and it still keeps pointing me towards installing USPL...can smone throw sm more light on this???
USPL Cannot be installed on your phone!!!
blitzkrieg7710 said:
Hi ! Thx for the response, although could anyone tell me whether I can flash another rom even if I have HSPL 1.56 installed and overwrite it with USPL???? or how as I have read the thread mentioned int the above post and it still keeps pointing me towards installing USPL...can smone throw sm more light on this???
Click to expand...
Click to collapse
Uspl is not something you flash on to your phone like the hardspl, it is executed in your windows operating system of your personal computer, it is like a medium which allows to flash unsigned ROMs on to the HTC blackstone a.k.a HTC Touch HD from your computer. If you are using Windows Vista or Windows 7 be sure to downgrade your drivers and disable the driver signature enforcement in vista and Windows 7 and yes you can flash other ROMs by using Uspl even if you have hardspl on your device because it will not overwrite yout Hardspl. Try searching and reading through the forum for the answers. i hope i have shed enough light for you to pass through your problem. have fun flashing. enjoy
Hi
I've try different build of Android the last week and I always get some error when I do some messaging. Half of the message I receive are in chinese instead of English or French.
I have try
Scoot_CyanogenMod_7_alpha_RLS1_All_Language
myn-WarmDonut-04-24-2010-240x320-110
Incubus26Jc's Super FroYo RLS16 All Languages
I have done some reading in the forum but didn't find the answer about this.
Please help.
Thanks
Le_MaiTre
change radio firmware.
What do you call radio firmware ??
got othe windows section and search radio...
What is the latest version I should have ??? Some threat are old and I can't figure out what is the latest version ...
Thanks
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
the files in http://it029000.massey.ac.nz/vogue/files/?C=M;O=D are outdated
Ok do you know where I can find the file that are the most up to date ???
Le_Maitre said:
Ok do you know where I can find the file that are the most up to date ???
Click to expand...
Click to collapse
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
theonew said:
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
Click to expand...
Click to collapse
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
theonew said:
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
Click to expand...
Click to collapse
I have forgot to say that my installation is on NAND so I can't use haret.
-Arturo- said:
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Click to expand...
Click to collapse
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.Can someone help me ??
Click to expand...
Click to collapse
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Le_Maitre said:
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
Click to expand...
Click to collapse
theonew said:
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Click to expand...
Click to collapse
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Le_Maitre said:
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Click to expand...
Click to collapse
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you were using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
theonew said:
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you wre using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
Click to expand...
Click to collapse
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Le_Maitre said:
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Click to expand...
Click to collapse
When you were using it, what was your radio version? If it was the latest, then it should have been 3.42.50. I read that for "Bell" users like you, the radio 3.42.50 is recommended for this installation.
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Click to expand...
Click to collapse
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
-Arturo- said:
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
Click to expand...
Click to collapse
I've read the whole post but I don't understand the 3rd way. If I click on the Bell rom with radio 3.42.50 it bring me to the HTC site and there nothing to download.
I've try to download the All Above Radios zipped. It gave me 3 files in a zip. I rename the file 3.42.50 in RUU_signed.nbh and put it in the folder of the ROMUtilityUpdate. Maybe is there I do something wrong ...
Did I miss something ???