Hey,
Just got my rhodium today... It came from a sample batch (some problems with my old Raphael - the distributor offered this free upgrade).
When I load the boot manager it has a big notice "Security Unlocked" on the top. Could someone please explain what it means? Does it mean I can flash any HTC ROMs without needing HardSPL? Or any ROMs at all?
Security unlocking is another level of unlocking for the radio. It allows you to flash radios (you need Hard though) from another device for example.
It also allows plenty of other stuff, but that's all most users take advantage of.
You're lucky, we normally have to wait for Olipro to get this
Dave
I have one like this as well. What exactly will it allow me to do?
slartiii said:
Hey,
Just got my rhodium today... It came from a sample batch (some problems with my old Raphael - the distributor offered this free upgrade).
When I load the boot manager it has a big notice "Security Unlocked" on the top. Could someone please explain what it means? Does it mean I can flash any HTC ROMs without needing HardSPL? Or any ROMs at all?
Click to expand...
Click to collapse
oh **** me sideways you have a prototype device.
put it in bootloader and tell me the SPL version - does it also say MFG?
slartiii said:
Hey,
Just got my rhodium today... It came from a sample batch (some problems with my old Raphael - the distributor offered this free upgrade).
When I load the boot manager it has a big notice "Security Unlocked" on the top. Could someone please explain what it means? Does it mean I can flash any HTC ROMs without needing HardSPL? Or any ROMs at all?
Click to expand...
Click to collapse
it will give you nothing without a HardSPL, but we can safely assume you are also SuperCID (these devices usually come with that feature too, even if the SPL isn't MFG) so you can flash any signed HTC ROMs
RHOD100 MFG 32M SS-BC
0.8.1000
Let me know of this helps you in any way. I have two of them.
I guess it may be a prototype - the rom on it is dated to around March
Pasting for your the bootloader info here:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) v7
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,518 800,846
792,198 212,194
227,852 Calibrated
Btw - will it need a different HardSPL than standard devices?
slartiii said:
I guess it may be a prototype - the rom on it is dated to around March
Pasting for your the bootloader info here:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) v7
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,518 800,846
792,198 212,194
227,852 Calibrated
Btw - will it need a different HardSPL than standard devices?
Click to expand...
Click to collapse
I don't reckon so, unless...
BTW: You're SPL is the same as almost every one elses.
Dave
will check my hardware info with qmat later today/tomorrow
checked with qmat - same samsung
sorry I can't be of more help
mike2037 said:
RHOD100 MFG 32M SS-BC
0.8.1000
Let me know of this helps you in any way. I have two of them.
Click to expand...
Click to collapse
exact version please? 0.8x.1000 where x is not shown currently.
cmonex said:
exact version please? 0.8x.1000 where x is not shown currently.
Click to expand...
Click to collapse
Sorry about that: 0.85.1000
mike2037 said:
Sorry about that: 0.85.1000
Click to expand...
Click to collapse
ah, nice, I have that one though
My bootloader shows a slight variation:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,534 804,862
807,213 209,210
202,852 Calibrated
Anything interesting to conclude from this?
Wiz said:
My bootloader shows a slight variation:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,534 804,862
807,213 209,210
202,852 Calibrated
Anything interesting to conclude from this?
Click to expand...
Click to collapse
You have a bog standard Touch Pro 2, the same as the other 99% of us .
Dave
DaveShaw said:
You have a bog standard Touch Pro 2, the same as the other 99% of us .
Dave
Click to expand...
Click to collapse
Damn, I knew HTC would not consider me to be special enough ;-)
Related
Help!
I've gotten a diamond that will not let the rom be changed... When trying it says that the device id is wrong... So I booted it up in bootloader to find out which id it has and it just says:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Anyone have some idea how to change the ID so I can install another ROM?
Regards,
Xanh
changes are the rom you are installing hasn;t been "signed" by olinex what rom is it? failing that try thier dev hardspl rather the the hardspl you have installed
when I try to install that one (Unsigned-Hard-SPL-Diamond-OliNex), it still says that my device id is wrong after uploading to 100%...
After that the spl hasn't been changed in the bootloader screen...??
I wasn't trying to upload anything yet (ROM).. I wanted to sim unlock it, and uploaded the 1.40-OliNex to the phone... that's when everything started.... But my phone never told me it was locked, only no service when putting a sim card in...
When I install the RUU_Signed_1_93OliNex_HSPL_UnsignedEdition, then I get vertical lines in the screen and it doesn't do anything anymore... so then i can only reset... Or it uploads to 100% and says invalid ID...
Anyone have an idea?
I can remember that my old qtec 2020i had a no-id update utility.. But that doesn't work on the diamond...
there are instructions to flash from bootloader somewhere... try that.
get ur device into Bootloader, then try flashing baisically.
Isn't that what i'm doing when I use diamondcustomruu to flash the device? because it sets it into boot loader and tries to upload.. or is there another way to flash?...
In the device i can see that it is a diam 100, but when i look into bootloader it doesn't say anything about that.. Probably that's why i get the ID error...
Because of this I cannot upload the developers edition spl...
My bootloader is
64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
i can't flash rom and spl (olipro-original)
Please help!!!
Hello, I need some help, I tried to upgrade to the latest factory rom ( Diamond_MRII_RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe ) which I downloaded from the HTC site.
The previous rom on my diamond was the previous factory release. Before that, the phone had originally been given to me by a stupid shop in Greece wearing that hacked Swtos greek version.
I run the setup, the phone restarted, the progress bar went all the way up to 100% and the i got "error 270" the communication has been interrupted.
Now the phone stays in bootloader mode (the red-green-blue-white stripes that's what it is right?) and it displays:
DIAM100 MFG 64m
spl-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please Try again
Any suggestions?
Thank you in advance!
Hi,
I am to flash my friends Blackstone, he bought it in china (were he lives) and his SPL number doesn't match anything what I get on the prompt is the following:
BLAC100 32M
SPL-1.19.0000
MicroP-BlackStone (LED) v6
When I search SPL-1.19.0000 it shows up an Elfin Hard-SPL releaser. Could this phone have been flashed and locked as an Elfin?
I am not familiar with this phone so I don't want to brick it, I was wondering which HSPL I should use in order to unlock. With google translate I think I can find a rom to flash with chinese text. Thanks in advance.
KW TP said:
Hi,
I am to flash my friends Blackstone, he bought it in china (were he lives) and his SPL number doesn't match anything what I get on the prompt is the following:
BLAC100 32M
SPL-1.19.0000
MicroP-BlackStone (LED) v6
When I search SPL-1.19.0000 it shows up an Elfin Hard-SPL releaser. Could this phone have been flashed and locked as an Elfin?
I am not familiar with this phone so I don't want to brick it, I was wondering which HSPL I should use in order to unlock. With google translate I think I can find a rom to flash with chinese text. Thanks in advance.
Click to expand...
Click to collapse
If your query is regarding HSPL, it should really be posted in the HSPL thread, no need for another thread.
To answer your query, you can use either HSPL 1.14 or HSPL 1.56, booth should work but it all depends on what rom you are going to flash. Any rom based on pre 1.56 should use HSPL 1.14 and any rom based on 1.54+ should use HSPL 1.56
I'm returning a Tilt 2 for a warranty issue. I downloaded the stock ROM from HTC and installed it on the phone. I then did the relocker.
On the Bootloader screen I have:
RHOD300 32M SS-DC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
etc....
Is this correct for the stock SPL? Will I have an issue with AT&T?
I'm not sure what the Bootloader screen should look like, if someone could post the stock Bootloader screen that would be great!
Thanks, E
I responded to your post in the HardSPL thread on this.
Duplicate question, already answered in the correct thread.
Closed,
Dave
Hiya, I want to put EnergyROM onto my HTC Touch HD but don't know how to do it. i've had a look around but to be honest, i don't know where to begin.
I went to a bootloader and it says:
BLAC100
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Ventcrawler said:
Hiya, I want to put EnergyROM onto my HTC Touch HD but don't know how to do it. i've had a look around but to be honest, i don't know where to begin.
I went to a bootloader and it says:
BLAC100
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=505377