i had to reroot my phone because somehow i lost the recovery image and it wouldnt let me flash anything
so i went re did everything
and i put the danger spl on here and now its stuck at the Tmobile G1 screen
am i screwed or is there something that i can do
Did you flash the radio first?
no
i didnt i couldnt remember which one was first
Remember when you flash the new spl you HAVE TO flash the rom again after it. Did you do that?
it doesnt even let me get to the recovery image to do that i had just flashed to jf 1.51 btw
roguestatuskat said:
no
i didnt i couldnt remember which one was first
Click to expand...
Click to collapse
if you can't boot into recovery (home and power) or bootloader (camera and power) then your phone is bricked. you can either call your provider or htc and say something about an update, and see if you can get a replacement phone.
can i just go to the tmo store tomarrow? and then they can just give me a new one?
roguestatuskat said:
can i just go to the tmo store tomarrow? and then they can just give me a new one?
Click to expand...
Click to collapse
you could try it, sometimes it is better over the phone, but you can try in store.
make sure you sound as dumb as possible, like you don't know anything about xda, rooting, flashing, brick, or anything technical. just say something about an update, then afterward it started back up, that it wouldn't boot.
im mexican so i can be all like
i was like eschool nd then the thing was like update nd i turn off pero no turn back on
phone or Tmo store which one is faster?
roguestatuskat said:
im mexican so i can be all like
i was like eschool nd then the thing was like update nd i turn off pero no turn back on
Click to expand...
Click to collapse
haha, i imagine that one would work
hopefully very well
The same exact thing happened to me a few monthes back, I called them and after some bs story they sent out a replacement phone. Then once you get the replacement, you just put your original phone back in the box and ship it back to them.
I have been able to replace a g1 in the store. Just don't take no for an answer. And if you have to take a hostage.
supremeteam256 said:
I have been able to replace a g1 in the store. Just don't take no for an answer. And if you have to take a hostage.
Click to expand...
Click to collapse
hahahahaha
but seriously though, you should try a little harder before resorting to re-rooting. You know that it may not always be possible to fall back to RC29 if HTC decides to change the keys, right? You should learn how to troubleshoot so you wont have to resort to that
damnit google, just give us root and this wont happen
roguestatuskat said:
damnit google, just give us root and this wont happen
Click to expand...
Click to collapse
lmfao they have. it costs $424 + shipping
google android developer phone
sorry google i apologize despite your cockliness towards cyanogen
what i meant to say is damnit Tmobile give us all dev phones
Rooted phones would do more harm than good to the average user...
As for your situation, does holding the Camera or Home key not boot you into SPL or recovery, respectively?
It's likely than when you went back to RC29 to reroot, your radio is reverted back along with it, and then you flashed the dangerSPL to brick your phone.
cigar3tte said:
Rooted phones would do more harm than good to the average user...
As for your situation, does holding the Camera or Home key not boot you into SPL or recovery, respectively?
It's likely than when you went back to RC29 to reroot, your radio is reverted back along with it, and then you flashed the dangerSPL to brick your phone.
Click to expand...
Click to collapse
flashing the DangerSPL then the RC29 image should have any detrimental affect on the phone. People has successfully downgraded directly to RC29 with success.
I've read many posts to that extent, but I cannot be 100% as I haven't done it myself
Sorry for the long read, this is half rant and half question.
Alright, I got a captivate a long time ago (about a year and 3 months ago), loved it, rooted it and installed cyanogenmod as soon as I got home, changed roms and kernals constantly, did whatever I wanted to do.
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
-Pirate said:
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
Click to expand...
Click to collapse
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
-Pirate said:
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Click to expand...
Click to collapse
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
-Pirate said:
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
Click to expand...
Click to collapse
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
U def don't need a jig. If it's booting it's not bricked. Try removing battery, start Odin, hold down power and down, plug in and put battery in. This should bring u to download mode.
prbassplayer said:
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
Click to expand...
Click to collapse
I did start to see a few people with the problem, however many people do not follow up with what fixes their problem, and I did what a few people had said to do.
prbassplayer said:
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
Click to expand...
Click to collapse
I should of mentioned that I did flash a few times, 3 total I think, it was getting stuck at boot.
prbassplayer said:
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
Click to expand...
Click to collapse
I understand that **** happens but honestly my old captivate could always get into recover mode and download mode no matter what, it's extremely frustrating that something changed with the newer models. One of my questions was what caused the brick? I did nothing wrong from what I see and it was running perfectly until I tried to restart/boot into recovery.
Oh and mbc663, thanks but download mode doesn't work at all, nor does recovery obviously.
I can't say exactly what you are doing. Best advice I can do Re download your .zips Flash back to stock GB and try again.
-Pirate said:
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
Click to expand...
Click to collapse
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Sounds like you got one of the refurbs that is missing the SBL. Have you looked at this thread? http://forum.xda-developers.com/showthread.php?t=1129821
I've not had this problem myself but it sounds like that might help. If I remember reading correctly, once this is flashed it should stick as long as you don't flash any other bootloaders on top of it.
Its not missing the sbl. The sbl it has doesn't respond to key combos. Derpa sherpa moment for samsung I guess?
Rofl yeah...if it was missing the sbl it would be fuggin bricked!
studacris said:
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Click to expand...
Click to collapse
I know, thanks. I'm such a creature of habit, I started doing it like this a bit over a year ago, and has worked flawlessly for me(just jinxed myself!) so I never saw a reason to "fix what aint broke".
I'll take a look at Cezar's thanks!
Yeah, missing SBL was a poor choice of words. My bad.
kangi26 said:
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Click to expand...
Click to collapse
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
kangi26 said:
3buttonFix to my SD, then reboot into recovery
Click to expand...
Click to collapse
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
-Pirate said:
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
Click to expand...
Click to collapse
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
kangi26 said:
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
Click to expand...
Click to collapse
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
-Pirate said:
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
Click to expand...
Click to collapse
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
kangi26 said:
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
Click to expand...
Click to collapse
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: deleted
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
-Pirate said:
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: imgurDOTcom/26sXGl.jpg
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
Click to expand...
Click to collapse
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
kangi26 said:
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
Click to expand...
Click to collapse
Maybe because it's a refurb? and whoops didn't think about that.
-Pirate said:
Maybe because it's a refurb? and whoops didn't think about that.
Click to expand...
Click to collapse
I'm not sure why, mine is a referb, and I have a sticker with mine on it. Ooh well, it is what it is
Sent from a autonomous device
So I messed up...Was trying to root and got stuck in a bootloop after flashing MAGISK, so I tried to just reflash the stock image...
I flashed successfully and got out of the bootloop but my wifi stopped working, so I rebooted and tried to reflash with the Pie image instead of oreo. For some reason I was getting errors so I got this bright idea to run the commands one by one in the Flash-All.bat.
But I still kept getting errors so I thought id reboot the bootloader and try again...thats where everything went south..Screen went black cant get to fastboot mode cant get to recovey..Pc recogizes the phone as "Qualcomm HS-USB QDLoader 9008" Bashing my head finding old LG threads that cant work for the razer, I dont know what to do...Any suggestions? Or am i just completely screwed.
Bad news I'm afraid but that's a hard brick you've got there there's nothing you can do to fix that afaik.
Mate, try this link? I googled around for you and this came up. Worth a shot -- best case it fixes it, worst case you're back to square one.
https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868
w00tnezz said:
Mate, try this link? I googled around for you and this came up. Worth a shot -- best case it fixes it, worst case you're back to square one.
https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868
Click to expand...
Click to collapse
I saw that link on my hunt but I can't use it because the files provided are specific to LG L70 devices, the Razer doesn't use TOT files for firmware they use I'm going file's and the software he provided (which I tried) can only flash tot files.
Thank you though!
Rox598 said:
Bad news I'm afraid but that's a hard brick you've got there there's nothing you can do to fix that afaik.
Click to expand...
Click to collapse
Yeah that's what I was afraid of. Well luckily I am able to get it replaced... maybe not the most honest way but I only had it for a day so I went to where I bought it and told them it stopped working and they are sending me a replacement. Since it doesn't actually turn on they can't see that I unlocked the bootloader.... however...I'm still gonna try to root it I'll be more careful but I need root! I've been rooted since way back in Evo4g and Galaxy S1 days I use allot of root features I just can't give up..it's why I dropped Samsungs and went to Razer since Samsung started locking bootloader's... anyway hope it goes better the second time around lol
majicmazo said:
Yeah that's what I was afraid of. Well luckily I am able to get it replaced... maybe not the most honest way but I only had it for a day so I went to where I bought it and told them it stopped working and they are sending me a replacement. Since it doesn't actually turn on they can't see that I unlocked the bootloader.... however...I'm still gonna try to root it I'll be more careful but I need root! I've been rooted since way back in Evo4g and Galaxy S1 days I use allot of root features I just can't give up..it's why I dropped Samsungs and went to Razer since Samsung started locking bootloader's... anyway hope it goes better the second time around lol
Click to expand...
Click to collapse
I'm glad you're getting it replaced! May I ask what factory image did you try to flash onto the device? Pie MR0 or MR1?
Rox598 said:
I'm glad you're getting it replaced! May I ask what factory image did you try to flash onto the device? Pie MR0 or MR1?
Click to expand...
Click to collapse
It was MR1 from March 2019 the 9.0 one.
Just an update got my replacement and rooted it! I didnt bother with the TWRP method I just patched my boot image with Magisk and BAM! anyway now im happy time to transfer over my old phone stuff and im good!
majicmazo said:
I use allot of root features I just can't give up
Click to expand...
Click to collapse
With the lack of Custom ROMs what root features are you looking for exactly?
I just ordered mine today and like you I've rooted all my past phones except my current LG G6 (which can't be hence my upgrade)
The only thing I usually really need root access for is the free tethering without AT&T knowing and I was able to do that to the G6 without root.
Not trying to be mean or anything I'm just curious.
Nitrous729 said:
With the lack of Custom ROMs what root features are you looking for exactly?
I just ordered mine today and like you I've rooted all my past phones except my current LG G6 (which can't be hence my upgrade)
The only thing I usually really need root access for is the free tethering without AT&T knowing and I was able to do that to the G6 without root.
Not trying to be mean or anything I'm just curious.
Click to expand...
Click to collapse
Block ads.
Overclock for speed
underclock for battery.
Remove bloatware
Change boot animations
Thats just some of many more...
A whole world of possibilities woth root beyond tetheting and roms.
Sorry for the months later answer i just saw this.
Btw i got this thing replaced and rooted the second time around just fine im very happy now