Database Develop

Anti Glare Screen Protectors, They Any Good?

I was looking to pick up some Screen Protectors for my Tilt and I noticed there are normal ones, and others that specify Anti Glare.
I was just wondering, do the Anti Glare ones make a noticeable differance when used in Daylight? I was using the GPS the other day in the car and I could see the screen but it does get pretty washed out when the sun is low.

Yes They Do
I have an anti glare type screen protector on my Garmin iQue M4. Works pretty well. Big difference between that and a clear protector.
I plan on ordering one for my Tytn II this week. Check out Pocket PC Techs. I think the website is PPCtechs.com or something. Much better than the Body Guardz I tried before.

the anti glare ones are dull in finish (usually) and take away from the great screen that the Tilt was given. I use the crystal clear protectors because I get the same clarity as if it was not there. Also, it protects the touchscreen from key scratches, banks, dings....

smittyofdhs said:
the anti glare ones are dull in finish (usually) and take away from the great screen that the Tilt was given. I use the crystal clear protectors because I get the same clarity as if it was not there. Also, it protects the touchscreen from key scratches, banks, dings....
Click to expand...
Click to collapse
I figured the matte finish would cut back on the Picture Quality a bit, but the anti glare ones seem to go on like a static cling window decal. You can remove, wash, and reuse them over and over. That being the case, I would probably only use it when I am going on road trips and I know I will need the GPS.
I am going to get some normal ones as well for everyday use.

Goanna said:
I figured the matte finish would cut back on the Picture Quality a bit, but the anti glare ones seem to go on like a static cling window decal. You can remove, wash, and reuse them over and over. That being the case, I would probably only use it when I am going on road trips and I know I will need the GPS.
I am going to get some normal ones as well for everyday use.
Click to expand...
Click to collapse
I think it's boxwave that will sell you 1 of each. AS for the whole wash and put it back on, I've never got them to do that. Usually by the time I'm ready to wash it, it's so worn out in the upper right corner or where the "s" or "a' keys on the pop up keyboard is, I usually replace instead of wash...

I've got both the high gloss and anti-glare protectors from Javoscreen. I purchased them for about 10 each on amazon. They fit perfect and seem to do an amazing job. I ordered the wrong size of each accidently the first time, which was OK because it gave me practice in getting this things on. If you actually do what the very brief instructions say, they go on to where you honestly have no idea anything was done at all.
They win my vote!

I recommend The Ultra-Clear Screen Protector from www.pdair.com (and while you are at it, get one of their cases as they are nice and allow you to use the keyboard in the case). I've been a very happy customer of theirs (free shipping from China) and have used their case and screen protectors on my 8125 (wizard). The screen protector lasts about 4 to 6 months for me.
I just put an order in with them for a new case and screen protector for an AT&T Tilt as I'm soon to be joining you guys (Tilt is on backorder though so having to wait...).

Goanna said:
I was looking to pick up some Screen Protectors for my Tilt and I noticed there are normal ones, and others that specify Anti Glare. I was just wondering, do the Anti Glare ones make a noticeable differance when used in Daylight?
Click to expand...
Click to collapse
I've used the Boxwave crystal-clear protectors on all my last devices, with the Tilt/Kaiser I decided to try the anti-glare version from Boxwave instead. I wish I had stuck with the crystal-clear, they are MUCH nicer. I do like the feel of the textured anti-glare, but I see no significant glare improvement and the loss of clarity is obvious. I'd trade some clarity for glare reduction but trading clarity for nothing is the pits
Re: washing and re-applying. BTDT - it's a ROYAL pain. Oh the wash and re-apply is easy enough, but getting the protector clean enough that there are no spots left onscreen is [email protected] near impossible in my experience.
Richard

rsolomon said:
I've used the Boxwave crystal-clear protectors on all my last devices, with the Tilt/Kaiser I decided to try the anti-glare version from Boxwave instead. I wish I had stuck with the crystal-clear, they are MUCH nicer. I do like the feel of the textured anti-glare, but I see no significant glare improvement and the loss of clarity is obvious. I'd trade some clarity for glare reduction but trading clarity for nothing is the pits
Re: washing and re-applying. BTDT - it's a ROYAL pain. Oh the wash and re-apply is easy enough, but getting the protector clean enough that there are no spots left onscreen is [email protected] near impossible in my experience.
Richard
Click to expand...
Click to collapse
Best bet would probably be to rinse it with distilled water or saline (contact lense solution would probably work for that matter) and then dry it with a microfiber cloth.

I have the anti-glare from Boxwave....and I have polarized sunglasses. If there is light is at all on the screen (not the backlight) whilst I am driving, i can't see a thing on the screen. Even with the backlight on full.
I think I'll switch to the clear ones.

Screen protector

There came a screen protector with my Touch Dual, which works very well, i do not see any difference in using the protector or using the device without it. So anybody out there, who knows, where to get this specific protector?
Thanks in advance.
we
PS It is adhesive, which i like more than sticking it to the screen and never being able to remove it again

the one that came with mine is ok but I messed up by having some dust underneath so I've ordered a new one from here: http://www.martinfields.co.uk/dis_product.asp?model=HTC_DualTouch&modeln=Touch Dual&prod_type=screen
I've always used Martin Fields screen protectors, IMHO they're the best! plus they're ultra clear once you put them properly you can't tell

gfreek said:
the one that came with mine is ok but I messed up by having some dust underneath so I've ordered a new one from here: http://www.martinfields.co.uk/dis_product.asp?model=HTC_DualTouch&modeln=Touch Dual&prod_type=screen
I've always used Martin Fields screen protectors, IMHO they're the best! plus they're ultra clear once you put them properly you can't tell
Click to expand...
Click to collapse
In all my excitement when I got the Touch Dual more than two weeks ago I completely overlooked the screen protector in the box Found it but still not applied it yet

Brando already delivers touch dual protectors too.

Screnn Protector Washable?
Hi..
Do you know if original screnn protector is Whashable?
Thanks

The orig. protector rocks.
I bought some from ebay and already dropped them into garbage.
Now i ordered one from martinfields and i hope this one works better for me ...
Any other experience?

i got 3 really cheap ones off ebay which are fantastic.
they're in 3 sections, you take one side off to reveal the sticky side then put it on the screen then pull the other side off to reveal the front face of the cover.
really good.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200185607339

I bought this as spare:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=180200707096&ssPageName=STRK:MEWN:IT&ih=008

so is the martin fields one the best? i applied the original one wrong and there is dust underneath it and need a new screen protector

Tothotspur said:
so is the martin fields one the best? i applied the original one wrong and there is dust underneath it and need a new screen protector
Click to expand...
Click to collapse
I don't know whether it's the best or not, but I had the same problem that you do.
I bought the protector from martinfields based on the recommendations in this thread, and must say that I like it better than the original one.
It is thinner, so it seems like you need less pressure to make the screen react when you press it.
I've only had it for a day, so I really can't say how durable it is...
Royan

Royan said:
I don't know whether it's the best or not, but I had the same problem that you do.
I bought the protector from martinfields based on the recommendations in this thread, and must say that I like it better than the original one.
It is thinner, so it seems like you need less pressure to make the screen react when you press it.
I've only had it for a day, so I really can't say how durable it is...
Royan
Click to expand...
Click to collapse
ok thanks, i will probably buy one as well

i bought a cheap one on ebay yesterday. as soon as it gets here I'll try it out.
had the same dust problem with the original. there should be at least 2 protectors

Tothotspur said:
so is the martin fields one the best? i applied the original one wrong and there is dust underneath it and need a new screen protector
Click to expand...
Click to collapse
i love the invisible shield. they have screen protectors and full body covers. customer service is fantastic, too.
http://www.shieldzone.com/item_description/HTCTOUDUAS.html
http://www.shieldzone.com/item_description/HTCTOUDUAFB.html
watch their demo videos. it's made from strong stuff!

Are the Martin Fields and Invisible Shields self adhesive?
I don't have to glue them on do I hehe
The one that came with mine I put it on properly but then I panicked slightly and thought "How do I get it back off!" so peeled one side up just to see if it would come off, then of course got all dust and crap under the edge so it looks skanky now thus want a new one.
I only managed to do that because it was slightly misaligned and a bit overlapped at the side of the screen though not enough to notice unless you looked very closely. So how do you get them off if they are put on perfectly? I know you could use a knife but you could scratch the screen and that defeats the purpose

HTCStuey said:
Are the Martin Fields and Invisible Shields self adhesive?
Click to expand...
Click to collapse
Don't know about Martin Fields.
Go to link in above post to see Invisible Shield. If I remember correctly, they tell you how to do things on their site. I don't have one for the niki so can't tell you for sure, but have one on my ipod and it took awhile to get on, but well worth it.
Also, their customer support is very very good.

HTCStuey said:
...So how do you get them off if they are put on perfectly? I know you could use a knife but you could scratch the screen and that defeats the purpose
Click to expand...
Click to collapse
Use scotch tape. Just stick it on the face of the screen protector and lift. Simple as that.
Btw, I've recently swapped out my screen protector because I somehow got a scratch on it. Anyway, the sales recommended one that was matte finished (as oppose to glossy like most screen protectors). I have to say, it is so much better than the traditional glossy ones. The great part is the texture. It is so much smoother than regular ones. Great for sliding your finger across using Touchflo.
However, it does diminish your off-axis visual quality. But i suppose that doesn't really matter since you don't look at your screen off-axis much anyway. It may even be a plus since you might not want the person next to you to see what you're looking at...

ohyeahar said:
Use scotch tape. Just stick it on the face of the screen protector and lift. Simple as that.
Btw, I've recently swapped out my screen protector because I somehow got a scratch on it. Anyway, the sales recommended one that was matte finished (as oppose to glossy like most screen protectors). I have to say, it is so much better than the traditional glossy ones. The great part is the texture. It is so much smoother than regular ones. Great for sliding your finger across using Touchflo.
However, it does diminish your off-axis visual quality. But i suppose that doesn't really matter since you don't look at your screen off-axis much anyway. It may even be a plus since you might not want the person next to you to see what you're looking at...
Click to expand...
Click to collapse
That's a good idea! I never thought of that, I did see something on a website about using something sticky to remove it but I was thinking of blutak or something like that and thinking that it wouldn't work very well!
A bit of grit got on my screen and I scratched the protector with my stylus the other day, another reason to get a new one, but also a good reason for leaving the current one on!
Where do you get the matte ones from?

HTCStuey said:
Where do you get the matte ones from?
Click to expand...
Click to collapse
I'm in Hong Kong so I just picked it up from one of many independently owned techy shops. I didn't pay attention to what brand it was (i basically just paid the guy and he opened it up and stuck it on for me). The next time i head back there, i'll take note of the brand.

Invisible Shield
Just installed the I.S. (bought on ebay) on my Niki...
It's been a pain in the neck to install...
It's really hard to prevent small bubbles on the surfaces...
Maybe on a white ipod has a better look but on the Niki black finish you'll see them..they're really really small but sometimes in a large number: the overall effect is as a dirty and scratched Niki...
Bigger ones could rise passing from the front/back to the lateral sides, in particular near the big 4 rounds.
The hole for the hands-free speaker was totally missing!
When in hand you can feel the sharp edges corresponding to its thickness ...
The original protector is a little bit "softer"
But...
I can have it in my pocket with no additional thickness...
Right now I was using the silicon case, but it seemed that I was calling with a tv remote control...

I was just gonna buy an Invisible Shield *Thinks*
Thanks for the info ohyeahar I was thinking of going for the Invisible Shield but now might just go for a screen protector and some sort of leather case-age. Dunno

Anyone using a diamond without a screen protector

Hi I was just wondering how many people are using their diamond with out a screen protector. I have been using the invisi shield but it's starting to peel and look pretty messy. I don't really want to have to carry it round in the htc pouch they give you.
So how many folks just stick it in their pocket and have they found the screen scratches easily?
Cheers

I'm currently using a special TPU case from CAPDASE, unlike all the other silicone cases on the market, I'd say this has to be the best quality non-leather case out there. It comes in two colors, black or silver/white. In real life it looks a lot better than in pictures. I'm also using their mat finish screen protector.
The picture is from Google.

Me
No screen protector and no worries

my original screen protector wore off and i'm going to get a new set ASAP. it's not very wise to be using the phone without one IMHO

sorry, double post

I'm not using any screen protector either (have had it for 7 months now) and so far no problems. There are a few very little scratches here and there but they are not noticeable and it doesn't bother me.
edit: just cleaned well the screen to double check and there is only one small scratch near the camera on the top right corner, but it's only visible under a certain angle and with the light reflecting on the screen. So, the Diamond's screen is ****ing resistant!

I'm using one from MArtin Field. They are highly recommended as I have purchased many of their protectors and they are very very high quality

i dont use protector and my screen is full of hairline scratches and it also has 3 reallly deep scratches
i dont care

vale|46 said:
I'm currently using a special TPU case from CAPDASE, unlike all the other silicone cases on the market, I'd say this has to be the best quality non-leather case out there. It comes in two colors, black or silver/white. In real life it looks a lot better than in pictures. I'm also using their mat finish screen protector.
The picture is from Google.
Click to expand...
Click to collapse
I can't find it on their website, would you be able to provide the product number or a link to where I can buy one?
Thanks
--------------------EDIT-----------------------
Found it, for whose who are interested.
Click here
Edit #2 ------------------------
For some reason, when I copy the url, it goes back to that page. Should have checked before I copied the url. Fixed url.

Hagi37 said:
I can't find it on their website, would you be able to provide the product number or a link to where I can buy one?
Thanks
--------------------EDIT-----------------------
Found it, for whose who are interested.
Click here
Click to expand...
Click to collapse
That's not the one I got, I'm just using the regular mat one, it's not a privacy screen protector. I can't find the exact shopping link, but the package looks like this, except the one in the link isn't mat. This screen guard comes in two types, clear or mat finish.
http://www.yesasia.com/us/capdase-p...amond-pda-phone/1011133846-0-0-0-en/info.html
EDIT: The mat one has the word "Excellent" instead of "Crystal Clear" on the package, it comes with a tiny cloth too, see attachment pictures.

It's not just scratches to consider, I have had mine for a week and I just put a screen protector on when it arrived in the mail and it doesn't attract nearly as many fingerprints and smudges, I was wiping the screen constantly before I put it on but I just sent several messages with my fingers and there's hardly a print on the protector.

i used to have a screen protector on it (the one supplied) but the corner started peeling off then i got annoyed with it... so there is now no protector on it. its been like it for about 6 months. its been kept in my pocket (with nothing else) and has only collected a couple of small scratches, which would probably come out with acrylic polish.

I didn't use a screen protector and regretted it as I picked up a fine collection of scratches. This reduces the resale value of the phone and alos on a screen with such a high dpi scrthes make a big difference.
However The screen also cracked seperatley, so it's off for an insurance job, after which it will be behind a screen protector/slip case.

I used the origonal one for 6 months and it was ok till the end. Replaced it with a cheap one from Ebay and after a few weeks it has bad scratches on it.
Next time i am going to replace it with an expencive one.

At first when I bought my diamond I used the invisible shield. Took the screen part of the shield off immediately because it felt to rubbery. I have been with no screen protector since and I have some hairline scratches, but they really don't bother me. When the screen is turned on they are unnoticeable. The truth is by the time the scratches start bothering me it's a great excuse to buy a new phone anyways( even though I really love my Diamond).

Nice one cheers people. Think i'll probably replace my invisi shield it does work really well it's just a shame it's peeled at the edges. It just makes the phone look messy.
Shame they didn't make it with a really durable scratch proof screen.
Cheers

I can't do that to my phone , i have sweaty palms most of the time

Sorry, posted the wrong url.
http://www.xell.hk/e/product/product_detail.asp?sku=5747&mscssid=JBF6GWNMU8689PPNVPH1M8TC1VNK1LN5

Naw, I've been sporting the geek look and using the supplied holster, but since I work in an office, everyone has a holstered device of some kind.
No scratch!!!!

This is what i got..... 10 screen protectors for $10 from ebay
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=140303615709
They work pretty well actually..... as good as the one that came with the phone~!

Invisible Shield by ZAGG for xperia play

Has anyone tried the ishield? Its cool man. WHat can you say about it?

I ordered the best skins it is same quality and cheaper price but much more clearer than zag and of the same quality. Just fitting it now takes time if you want to do a proper job like me i will upload pics of it when i am done.

jutley said:
I ordered the best skins it is same quality and cheaper price but much more clearer than zag and of the same quality. Just fitting it now takes time if you want to do a proper job like me i will upload pics of it when i am done.
Click to expand...
Click to collapse
i did pretty much the same thing, its a pain trying to install the shield without getting dirt or dust underneath but when its finally done it looks great

i see i see. can you post a site about your best skin so i can look further. thanks

vdciii said:
i see i see. can you post a site about your best skin so i can look further. thanks
Click to expand...
Click to collapse
http://www.bestskinsever.com/sony-ericsson-xperia-skin

I went with bestskinsever too but not fitted it yet, will do today or the weekend, can post pics if need be....
Just bought the body one as the screen protector it comes with is great and a better job than me doing it.....

I have been fitting thease things for years and can do a very profesional job of it you cannot tell there is a skin on it when i finish with it i think mine will be finished today i hope but its looking good.

I strongly dislike the Zagg protective shields. The touch feel is horrible with them on. I rather get some scratches than use them. I had one a little while on another phone but ripped it of after a few hours.
Besides. There's already protection on it? I would like to get another one of those original ones instead. You can hardly see nor feel it.

Well i guess that's your opinion.

dannejanne said:
I strongly dislike the Zagg protective shields. The touch feel is horrible with them on. I rather get some scratches than use them. I had one a little while on another phone but ripped it of after a few hours.
Besides. There's already protection on it? I would like to get another one of those original ones instead. You can hardly see nor feel it.
Click to expand...
Click to collapse
i got mine for resale purposes, not that im planning on selling it any time soon, but a mint condition, sim free, white xperia play r800i should go for more then a scratched black one

Hi vdciii.
I've had the invisishield installed on my phone. Since you're also from the Philippines, there is an official store that installs them with lifetime warranty (if it gets torn or damaged, 400 for "shipping"). So if the protector gets loose, they can also fix it for free, just do this before dirt gets in. I got it for only P1500.
The only thing I dislike about it is that there's a certain friction with your finger sometimes that annoys me, but it works. It also gets a bit finger print dirty but nothing a good wipe can't fix.

fvig2001 said:
Hi vdciii.
I've had the invisishield installed on my phone. Since you're also from the Philippines, there is an official store that installs them with lifetime warranty (if it gets torn or damaged, 400 for "shipping"). So if the protector gets loose, they can also fix it for free, just do this before dirt gets in. I got it for only P1500.
The only thing I dislike about it is that there's a certain friction with your finger sometimes that annoys me, but it works. It also gets a bit finger print dirty but nothing a good wipe can't fix.
Click to expand...
Click to collapse
hello!
yeah, i find it a little bit annoying too. but for an exchange of full body protection, i think it's okay for me.
But what annoys me more is the thought that not all parts are protected. the white metal on the screen part is not protected which is different from what i have seen in the sites here. i thought of double checking the other ishield for xperia play when i have time.
How's your xplay now anyway? does it still have the ishield up to now?

vdciii said:
hello!
yeah, i find it a little bit annoying too. but for an exchange of full body protection, i think it's okay for me.
But what annoys me more is the thought that not all parts are protected. the white metal on the screen part is not protected which is different from what i have seen in the sites here. i thought of double checking the other ishield for xperia play when i have time.
How's your xplay now anyway? does it still have the ishield up to now?
Click to expand...
Click to collapse
My xp is still protected by invishield up to now. Other than the dirty screen, I think it's good enough naked. It's just hard to find silicone/crystal cases for this phone in this country.

I have used my Invisible Shield since i bought my Play in august. Still no scratches Just bought the Play Dock too
Sent from my R800i using xda premium

I'm very disappointed in Invisible Phone Guard. It appeared to include more coverage bits than any others on eBay and was described as being thinner than the others and compatible with "any" case. It seems as thick as any Zagg shield and includes NO corner protection/coverage. The right-side piece only surrounds the volume buttons and does not run the length on the side like that carbon fiber style one someone else has here. Though there are pieces to cover the trim above the screen and below the buttons, it has none to cover teh silver bits on the left and right of the screen. It also includes no protection for the L & R buttons. I think the Zagg Invisible Shield option with all the extra bits would have more coverage but they don't show it on the site.
Oh, did I mention that the microfiber cloth was full of lint? Also, even though I tried to align the screen protector with the top of the screen it is touching the bottom and seems to be causing my home button to stick down. It should have been a little shorter! Before reinstalling my Otterbox Commuter I noticed that the clips that go over the top and bottom were fractured and, sure enough, they cracked through and flaked off when probed with my fingers. When I snapped in on the phone, I saw new stress fractures appear.
I'm not happy with the Otterbox Commuter either, but that's for another thread.

I dont understadn, what's the difference between this and another normal screen protector?

Dany XP said:
I dont understadn, what's the difference between this and another normal screen protector?
Click to expand...
Click to collapse
First of all, what do you consider "normal?" Traditional Zagg Invisible Shield screen protectors have an adhesive and require wet application, while they now have a new line of "dry" protectors that are likely more like the alternative stiff film variety (dunno. haven't seen one). The original Invisible Shield is a very tough elastic designed for things like the edges of helicopter blades and it adds what has been described as an "rubbery orange peel" texture as opposed to the smooth texture of many others. It feels a bit sticky when perfectly clean. There are many others that use the exact same material, like the Invisible Phone Guard that I mentioned earlier. Zagg charges more than most alternatives and has different options, including screen, full-body, and another that has little bits to cover every part if you are dedicated enough to bother installing it.

Its great, I have had one on every smart phone that I have had, I have never gotten scratches on it either.
Sent from my R800a using XDA App

I have it on mine, I think it was a bit much i payed 38$ for mine just because i got the phone for free with upgread. Its the full shield and its not so bad. Makes ur phone super glossy. For the protection its worth it. And yrs the finger doesnot glide like it did but really not that bad this phone aint cheap rimember that. Zagg works
Sent from my R800x using Tapatalk

I have had the shield before and it covers well due to it being thicker then most covers, however the feel of it is very resistive. Which I do not like.
Also, I have had 2 friends who after many months of using the shield on their phones had issues with their touchscreens going out. If I recall over time the zaggshirld will damage your touchscreen digitzer. When I finally removed my zaggshield it was all yellow.
My opnion do not touch a zaggshield yeah they really protect your phone until the touchscreen takes a crap on you.

The Best Screen Protector So Far

This fits perfectly and yet it is so economical to buy.
Covers the curve and fits perfectly, most people don't realise I have a screen saver on my phone.
Excellent value and quality.
Go on treat your phone.
PS ** I have nothing to do with this company **
http://www.amazon.co.uk/REINFORCED-...TF8&qid=1439192831&sr=1-12&keywords=FLIPACASE

Some reviews rating it poor mate that the protector doesnt cover the edges of the screen? Can you confirm or deny?

Can you post some pics maybe?

Click here for larger view
http://i187.photobucket.com/albums/x62/allanon1158/20150811_232001_zps18qhtxzr.jpg
As you can see it fits extremely well with no bubbles or wrinkles, my partner has one on her S6 Edge with the same results and if you saw what smashed against it in her handbag you would be as impressed as I am.

Looks great but I couldn't find it on Amazon US

Probably because I live in the UK

Doesn't Amazon UK send to USA or Germany?

Raistlin1158 said:
Click here for larger view
http://i187.photobucket.com/albums/x62/allanon1158/20150811_232001_zps18qhtxzr.jpg
As you can see it fits extremely well with no bubbles or wrinkles, my partner has one on her S6 Edge with the same results and if you saw what smashed against it in her handbag you would be as impressed as I am.
Click to expand...
Click to collapse
looks great. I have the spigen and it has orange peel effect. like little dots all over the screen (posted on forum). Can you confirm this one doesn't have that? does picture look less sharp? contemplating this…

You have to look really hard to see i have a screen saver fitted.

I was wondering whether having one of those full edge to edge screen protectors on would be affected when putting device in to a case...are the edges, etc. likely to come loose?

scott2121210 said:
I was wondering whether having one of those full edge to edge screen protectors on would be affected when putting device in to a case...are the edges, etc. likely to come loose?
Click to expand...
Click to collapse
I have a sccren protector both front (edge to edge) and rear. It doesn't get affected by cases. It feels safe when I use phone.

shaq1907 said:
I have a sccren protector both front (edge to edge) and rear. It doesn't get affected by cases. It feels safe when I use phone.
Click to expand...
Click to collapse
Thanks, that is very good to hear.

@Raistlin1158
Hi mate, I'm really fed up with all the screen protectors. I have spent a lot of money for this. Wet and dry solutions. Always the same result. Bubbles and a orange skin. I'm leaving in Germany. This protector would cost approximately 15€ with shipping. What is your honesty meaning? Is it worth? Is it better than skinomi or the other named protectors?

As you can see it looks good, it works well and is cheap ... Nuff said

i have that copter screen protector for my s6 edge and to be honest it was really bad to install,
bubbles everywhere, ill try install it again and see if they come out

Really excellent screen protector
I live in Romania.
Tried many many screen protectors so far, all bad (too short, only plane part, orange peel effect, edge unsticking etc etc etc)
Finally got the right one, covers the entire screen, great texture, perfect cuts; allthough the adhesive seems a bit more sticky than usual so requires much patience.
I personally prefer to be installed right at the dealer for free, the guy is great expert.
http://www.24gsm.ro/protectie-displ...5-folie-de-protectie-foliata-toata-suprafata/
Totally recommend!

Raistlin1158 said:
This fits perfectly and yet it is so economical to buy.
Covers the curve and fits perfectly, most people don't realise I have a screen saver on my phone.
Excellent value and quality.
Go on treat your phone.
PS ** I have nothing to do with this company **
http://www.amazon.co.uk/REINFORCED-...TF8&qid=1439192831&sr=1-12&keywords=FLIPACASE
Click to expand...
Click to collapse
beware don't get this… its really bad, it scratches if you ever put earphones in the same pocket. will scratch if you scratch with your finger nail..
also get it and you will get bits of paper saying give it a good rating and you will get some money back… crazy… avoid guys unless you want to be disappointed

I also have the screen protector on from OP.
He's right, you really can't see that it's on. I was really impressed at first.
Kur0ya is correct though, easily scratched by nails, being left in bags etc. It's better than no screen protector mind but you'll need to replace it every 2 months as you will damage it!

moorie said:
Kur0ya is correct though, easily scratched by nails, being left in bags etc. It's better than no screen protector mind but you'll need to replace it every 2 months as you will damage it!
Click to expand...
Click to collapse
But itsn't that sort of the point? I mean I paid close to a thousand euros for this phone, and would hate have the screen shatter or scratch, 0.99GBP every 8 weeks doesn't seem too bad a price compared to ~10-20€/month for an extended renter's insurance (with a 150€ deductible, mind you) if the phone happens to fall out of my hand when I pull it out of my pocket or something.
Mind you, I'm probably not going to buy one of these, I'm waiting to see which one of the few actual tempered glass protectors will be the one to go for, and spend a little more on that.

If only the screen proctor can turn out well, but it has poor ratings on Amazon.