Hi i followed the beginner's guide. My HTC USB Sync is updated and I am in bootloader mode. But I am unable to install the USPL.exe. It keeps prompting me whether I am in bootloader mode if not please update your usb hub. Some one please help.
tweisong said:
Hi i followed the beginner's guide. My HTC USB Sync is updated and I am in bootloader mode. But I am unable to install the USPL.exe. It keeps prompting me whether I am in bootloader mode if not please update your usb hub. Some one please help.
Click to expand...
Click to collapse
When in bootloader, does the bottom of bootloader screen change from 'serial' to 'usb'? If not you may need to update usb drivers on your pc.
Also, open activesync and go to connection settings. Make sure you have selected 'allow usb connections'
Any further queries should be posted in dummies guide to flashing.
Thread closed
Related
I am wanting to updrage my rom for my HTC Touch HD and there are tick boxes saying that make sure u perfom these before you update:
Battery over 50%
ActiveSync
connect phone to computer using USB
Disable the standyby on PC
after i click click next and do the steps the process gets stucked on 0% buth on phone and computer and after few minutes it says error
So i am sure that i have done all those but not to sure if my phone was in Activesync mode or not.
When the phone is turned on and connected to the computer connects using Activesync fine but when i turn the phone off and go on Bootloader mode connection is lost (as soon as i turn the device off)
so can someone please help how to activesync on bootloader mode
UPDATE:
I did HSPL and then BlackstoneRUUWrapper and now its working (its not getting stuck on 0%) and actually % is increasing
Everyone Thanks in Advance. I will tell you all when its done.
If it says USB when you connect to the pc while in bootloader mode, you're good to go
ye it says USB at the bottom of the screen but the process always stays at 0% then after a while it gives Error
wich rom do you want to instal and have you instald hspl?
ABaruwal said:
ye it says USB at the bottom of the screen but the process always stays at 0% then after a while it gives Error
Click to expand...
Click to collapse
connect ur phone directly in boot loader rather than thru active sync..
Run the USPL 2..
and then start the rom flash.
jus tick all the req fields in the RUU.(be in the bootloader) cos it makes no difference..
this is all assuming u have win XP or Vista with the req drivers.
cheers
chetan
Have you followed all of the steps in the Dummies Guide to flashing? (See link in my signature.)
The fact that you are able to connect to Activesync is fine. There is no need to be in Activesync whilst flashing and while in bootlaoder mode.
Have you read through the tutorial thread? There is a troubleshooter faq there. I did my first flash using it yesterday with no problems at all
Please read and post future queries on flashing in this tutorial/guide thread
i have problem to unlock trin 1000
after download HTC_Trinity_SIM_CID_Unlock_v1
1)i Transfer SSPL/SSPL-TRIN.exe to your phone and run it
2)Tri-color screen will appear
3)i Disable activesync (file -> connection settings -> uncheck "allow USB connections")
4) i Connect your phone to your computer using the USB lead.
5)i Run RUU/ROMUpgradeUtility.exe
6)i Follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
but here in step 6 stop flaching in 7%
and restart
i need help
download ALL HTC 1.2 and follow the instructions for unlock
Damirzvo said:
download ALL HTC 1.2 and follow the instructions for unlock
Click to expand...
Click to collapse
all the same soft
and please see what is problem
hey guys, tried flashing my rom, after flashing it boots up in stupid horrible colors and gets stuck on allignment page so doesnt boot completely. Any ideas would be mucho appreciated. thanks
You forgot the flash the 1.56 spl from olinex
Download it. set your device in bootloader, connect via usb and wait for the serial on the bottom white part to turn into usb and fire up the app. Youll probably have to reflash after that but it will work
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=505377
every time i go to bootloader it wont establish a connection to the computer.......this is the main problem
you don't need any connection to the PC, be it active sync or whatever. just
plug in the phone in bootloader into your usb port, wait for it to show USB and then flash either wirh HSPAL or USPL
but srlry, just read the howto guide!
read the how to guide........im not that dense mate! something just went wrong it happens........even when i try it without establishing a connection to activesync it wont install and says theres an error on the ruu
I hope you're doing this on a XP machine.
Phone in bootloader -> Plug-in USB -> Flash SPL
If you could tell us your step-by-step procedure, it would help us try to resolve your problem.
As above posts have stated. Follow the Dummies Guide and you'll be fine. Please post further flashing queries within that thread
Thread closed
I am trying to install 6.5 on my HTC touch HD.
i have looked at the guides, but i am getting nowhere......stuck at 0% on the flashing.
I want to flash Energys rom onto my phone.
Phone is currently
SPL 1.14.000
Radio 1.09.25.14
Rom 1.19.61.1 WWE
what do i need and how do i do it ?
i have downloaded
HSPLWrapper_Blackstone_156OliNex,
SSPL-Manual-TouchHD,
Unsigned_HardSPL_for_Blackstone_OliNex,
Energy.BLACKSTONE.29018.Sense2.5.Cookie.2.0.Apr.18
i have tried on both WinXP and Win 7 Systems, same error 262
1- have you tried installing the htc usb sync drivers manually? -->google
2- do you ever see the tri-color bootloader screen? If not you could try to put it in bootloader manually? you can do that by holding vol down+power button. You do have to turn it of first, and you have to remove the usb cable. WARNING: do not pull out the usb cable while its flashing, you won't be able to start your phone then (you can still flash roms though)
hope this helps
when connecting device to pc does bottom of bootloader (tri colour screen) change from "serial" to usb"? If not you need to either update drivers (see link in Dummies Guide) or open activesync and ensure that "allow usb connections" is enabled in connection settings
If above is all ok then you need to follow guide and get yourself HSPL
If getting stuck at 0% try trouble shooting section and use SSPL
Either way, please post further queries regarding flashing in Dummies Guide thread
Thread closed
Hi
I'm trying to follow the instructions on htcdev to unlock the bootloader on my desire c so that I can then root the phone. However, when I follow the instructions, it says first to take the battery out and replace, then to enter bootloader mode with power + vol down, then to select fastboot, and finally to connect the device via the USB to my PC.
When I connect the device, it powers off and nothing happens. I've tried running the same process with USB debugging on and off and it doesn't seem to make any difference.
Any help would be appreciated.
Thanks :good:
It seems like you don't have the proper drivers installed in your PC. Do you have Android SDK, HTC Sync Manager and Java Runtime Enviroment(JRE)?
Refer to this thread... http://forum.xda-developers.com/showthread.php?t=1947613
aashay960 said:
It seems like you don't have the proper drivers installed in your PC. Do you have Android SDK, HTC Sync Manager and Java Runtime Enviroment(JRE)?
Refer to this thread... http://forum.xda-developers.com/showthread.php?t=1947613
Click to expand...
Click to collapse
I updated to the latest versions of sync, the android sdk and Java before running the unlock process for bootloader so I didn't think it should be that.... turns out it was my USB cable causing the phone to shut down and swapping for another was fine! Thanks for the reply, all is good and the phone is unlocked
Oh great! Welcome aboard