HELP PLEASE - before i get so angry with my G1 - G1 Q&A, Help & Troubleshooting

When I first got my g1 I loved it. Then the cupcake update happened. Everyone was overjoyed - except me. My phone went much slower and juddery, and loads of little errors happened. Now these are the 2 problems i need help with:
Rotating. The phone stays in either portrait or landscape mode and won't rotate to the correct mode with the keyboard sliding in or out.
And
Messaging. Whenever I send an sms message i get a force error as soon as the text is sent through.
PLEASE HELP ME :'( :'( before i go to t-mobile and cancel my phone - it has got that bad ((((((((((((((((((((((
If you need anymore info just ask thanks,
Ross.

You might want to try re-flashing the cupcake update, if your phone is rooted then you can search around and find out how to do it easily. If not you need to find the official tmobile cupcake update, I dont have any link for it but I am sure if you search here or google you will find it. You then need to plug your g1 into the usb on your pc and mount the sd card, if it is a .nbh file name it DREAMIMG.nbh, if its a .zip name it update.zip and copy it over. Then reboot into spl by holding camera+power and follow onscreen instructions. Good luck.

Try doing a wipe and see if that fixes your problems.

If wiping doesnt fix your problem id hit t mobile up for a replacement

Related

HELP!!!!

i tried teaching my friend to install 1.5 manually from my other thread (http://forum.xda-developers.com/showthread.php?p=3847374#post3847374)
and she screwed up because the last step she didnt push home+back and instead turned the phone off by pushing and holding the power button and turned it back on and it didnt install because she didnt do it the right way and we tried it again by deleting it from the sd card then re-transfer it still didnt work so if anyone has any ideas on what to do then please tell me.
p.s. im sorry if this was said some where else cause i didnt search it because i wasnt exactly sure what to say in the search.
oh and also you can gtalk me - [email protected]
did you check the build number in her phone? if the build is correct(latest) then the only thing that didn't complete is the radio, upgrade that manually or downgrade to another stock build and re-upgrade correctly
yea i told her to look at that it still said 1.1

G1 possibly bricked; stuck in recovery console [researched]

i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work

UK G1 bricked after installing Shop savvy - help please

Hi guys,
UK G1 (Dream) phone recently updated to the 1.6 build, all working fine.
Yesterday I tried installing the free app Shop Savvy. the phone resetted itself after install and sat on the G1 boot screen permanently.
Now phone will pass this boot screen (Tmobile G1)
Tried:
Recovery mode - will not work at all
Quick boot - brings up the multicolour screen but does nothing after.
**PHONE IS NOT ROOTED**
looks like I have had the phone JUST over a year, not looking good...
Any ideas?
You can boot in to the SPL/bootloader so thankfully you haven't bricked
If you're on a contract with tmo you could take it back to the store and they should give you a replacement, but where's the fun in that?
If you want to fix the problem yourself, all you need to do is downgrade to firmware 1.1, then accept the OTA update to 1.6.
Here's the procedure:
1)Put the phones SD card in to a card reader and format as fat32
2) Extract this file and copy it to your SD card as 'DREAIMG.nbh'
3) Put the card back in the phone and hold down power and camera to boot in to the bootloader.
4) Flash it. (Action button is the trackball).
It's a good idea to leave the charger plugged in and have a decent amount of charge in the battery (eg 40%+).
Afterwards the phone will restart and you will need to re-enter your google account info. All your apps and data will be gone, but there's not much we can do about. You can set things up and install apps while you wait for the prompt to update.
Thanks alot AdrianK,
Really appreciate the steps and info, nice one
I have done some flashing on other phones etc so I have no problem with this. However, I am wondering how a normal app such as Shop Savvy could corrupt my ROM and am wondering if it might not be better to get a new phone as this one could have hardware fault?
What do you think?
Silver.
OK,
did exactly as you said Adrian. Phone went through all the flashing routine then, right at the end said press action button to continue (trackball) every time I press the trackball phone returns to the bootloader screen
What now?
SilverfoxUK said:
OK,
did exactly as you said Adrian. Phone went through all the flashing routine then, right at the end said press action button to continue (trackball) every time I press the trackball phone returns to the bootloader screen
What now?
Click to expand...
Click to collapse
I think you can take the battery out restart the phone
Thanks but unfortunately I have already tried that.
Phone just sits on the G1 boot screen as before...
Any other Ideas?
is that ROM you linked for me a UK ROM Adrian?
Once you get to RC7 use these to build back upto 1.6
http://code.google.com/p/official-android-firmware/downloads/list
SilverfoxUK said:
Thanks but unfortunately I have already tried that.
Phone just sits on the G1 boot screen as before...
Any other Ideas?
is that ROM you linked for me a UK ROM Adrian?
Click to expand...
Click to collapse
Yeah that's the RC7 ROM, the UK ROM for 1.1. RC29 is 1.1 for US phones.
This is all very odd, especially that it was an app that caused it, or as you suggested possible hardward failure. Oh well, I guess all you can do now is take it back to tmo.

Help help help root problem

OK this is the deal, i bought a phone off someone from craigslist. i have no idea what this person has done on the phone it came as stock donut. no root or anything of the sort. and there is no way to contact the person to ask what or if they tried to do anything. i have been trying every which way and yes the search bar is my friend. and nothing. ive done this before MULTIPLE times i am not new to rooting and flashing. Everytime ive tried to load something it always says no signature(#), number sign for random file numbers, i have tried to downgrade everything spl, radio and down to rc29, and trying to figure out if i could downgrade the recovery to the original recovery not the 2 (e). ive stumbled upon the idea that i might be missing files. maybe the otacerts i believe. i searched that also and found someone only saying to reinstall rc29 THATS MY PROBLEM I CANT IT WONT LET ME. Please someone help before i bust my head open on my desk.
and sorry about the punctuation typing super fast and avoiding my boss.
No signature usually means the update isnt signed.... and you probably got the update.zip thats corrupt...
Ive tried 3 different downloads of every file aka different dev for each thing. Anything i try and put as Update or even left as Original such as the .nbh it all comes up no sig. is everything online corrupt?
You don't have a root hence no luck on roms.
.nbh is not flashed thru recovery. Put it on your sd, power down your phone and power up holding power and camera buttons. Phone should find DREAIMG.nbh and restore your device to RC29. From there, secure your root and it's business as usual. Good luck.
borodin1 said:
You don't have a root hence no luck on roms.
.nbh is not flashed thru recovery. Put it on your sd, power down your phone and power up holding power and camera buttons. Phone should find DREAIMG.nbh and restore your device to RC29. From there, secure your root and it's business as usual. Good luck.
Click to expand...
Click to collapse
going to try this again

Multiple questions, multiple problems, may be multiple cracks in my G1 after I throw

First off I would like to say that this is one of the best forums I have ever seen as the amount of support and helpful users and creativity put into these phones are staggering. I was going to go to Windows mobile for my next phone but I now doub it with this site or at least maybe I will dual boot.
So I am sure I am asking questions that have already been answered but my problems with the phone (USA G1) are many and the answers to some of the problems are so fragmented that I had at one point 14 tabs open for reference to solve just a few issues. I am 70% noob with the G1. I have had the phone for a year with no major issues just the annoying Force Close that seemed unecessary for the commonality of the app that had problems. Texts were annoying because I could not tell if they had been sent the previous day or recently as service at my home is come and go and my older Verizon phone had envelope information and even said if the person had read it or not so no annoying duplication. However, otherwise it was stable and would last about a day and a half with the double size battery.
Recently, however I had rebooted from the power button prompt and it got stuck (I can't remember on what screen) and figured installing a different ROM and other files would fix the problem. By the way, I had bought the phone rooted and I believe it was using JF 1.42 and a Cyagen mod (forgive my spelling). So I followed step by step from this forum the wiki on the lastest stable Cy ROM. I followed the instructions to the T.
Being new to the software, it was a slow process with a lot of repeating of steps discovering little details that were not mentioned like naming something update instead of update.zip like instructed or adding the .img as an extension. So I had nearly made it and then I came to the DangerSPL and other files to be loaded on the phone in order via fastboot. Despite, several attempts I could not get the skateboarding droids or the rainbow screen to come up so I finally decided to just continue as I had been using Amon-RAs 1.7 update zip feature to follow the instrucions and install the software in order. All was well until I got to flashing the actual ROM which said something about how it said the E: [insert file name here] was not correct so it aborted everytime but it did show some progress on the yellow bar.
Next came the issue of the G1 screen hanging up after the above problem and for some reason I could get to the 1.7 screen but only by holding the button required to access Amon RA longer than usual other wise it would say the build of Amon RA at th ebottom with no commands and the reboot itself or hold it longer and finally get to the Amon RA but it would not load my recovery files as I had made many along the way.
I nearly gave up but then came across this solution which worked by using method 1 at well I am not allowed to pu the websit in here but I am not allowed by the mods. but it is the 4th one down if you google "how to fix a soft brick g1" and the link is titled Unbrick - android-roms - How To: Recover your G1 from a bring ...However, it did get stuck at the rainbow screen as it finally let me do the fastboot and I saw the Androids skateboardig but it hung at the rainbow screen. It was here I noticed that my 32A phone was now a 32B. I took the battery out and powered it up and lo and behold it was asking me to put in my google information and I finally made it to the home screen.
I thought "Yes!". Now, I can try again since it will fastboot now which was what was recommended at the final steps but I was mistaken. I could not searc the market for common apps like wave secure and it frequently said it does not exist. I saw that my terminal app was gone and when I was finally able to download it from the market and my superuser app was gone and the termina would not respond as before to the input of SU.
Then, I noticed my phone's screen would randomly come on and only sometimes go off. When I pressed menu it was as if it the call button was stuck and it would either repeatedly bring up voice dial or call someone. The buton does not appear to be stuck otherwise. When it would briefly stop, acting like the call button was in turbo mode it would give me the option to mount the SD card as I had lost my micro sd card reader but never give me a chance to mount it before the call button interrupted with google dial or calling some number.
I do not believe this to be a hardware issue because as far as I remember the call button worked normally during the steps as it was requently used. So my questions, at the moment, are these:
1. How do I tell if the call button problem is a hardware or software issue?
2. Once I find my card reader and will I be able to use the factory bootloader to go through the updates.
3. Obviously I have derooted my phone (or maybe I can delete the diag from sd card and it will operate as it is derooted), will I be able to reroot my phone by using my backups of nandroid basically leaving me at whatever step I was on to the road of recovery?
4. How do I use my nandroid backup to recover especially if I am stuck with the factory bootloader?
5. I copied my SD card before I did the wipe originally so will I be able to find a .xml from handcent with my texts? (I text myself my mileage for work as with my hours, it is easier than using an app plus it saves space for other apps)? Should I load that backup nandroid first and start over?
6. Is there a quicker way to root like...a program?
7. What is your advice for the future other tha obviously backing up my texts more?
8. When did wave secure start costing money? I think I might have backed up everything a few days before the crash but I have no access to it now.
9. What other key combinations can I later use for the fast boot?
10. When formating the card to fat32 what allocation do you use and do you use quick format?
11. What is lost dir. and why is it empty?
12. In Amon RA 1.7 there are several caches which I cleard all of them when asked to clear the the cache in the wiki directions? Should I clear all of them and what are the seperate caches, espicially the davik one?
I am sure I am missing some question but I will post more as I try to follow your directions or attempt other methods. I apologize for the long, long story but I wanted make sure I did not leave out any detail so this can be resolved ASAP because I am sure I am receiving texts and calls and people are probably thinking I am ignoring them (no one leaves voicemails anymore so how can I know if they called or texted during the phone's sickness). I also apologize if I have broken any forum rules or posted in the wrong section or violated some. Thanks guys in advance. I miss the fat little thing so much.
Oh My god! Sorry but that's too long for me to read, my attention span isn't all that great =p
I will try to help with your questions but I didn't read the whole intro so my answers might be a little redundant.
1.Run "adb logcat" from a cmd prompt on your computer and see if pushing the button registers on the computer
2. um ok??? not a question
3. you will have to re-root but your backups will still be usable after you gain back root
4. boot to recovery (home+power), scroll down to backup and restore, select restore, and select the file
5. I'm not familiar with handcaent so can't offer help there.
6. It's not hard. Downgrade with DREAIMG.nbh to RC29, use update.zip to upgrade to 1.5, install one click root, use it, flash a recovery, and flash a rom.
7. You should write shorter paragraphs =p
8. Again, not familiar with it.
9. HOME + POWER, and BACK + POWER
10. No clue....
11. It's a folder automatically created when you don't unmount your phone before disconectiong the usb. It's useless and you can delete it.
12. When installing a new rom, just wipe everything. It saves you trouble later on.
Hope I helped...
Thanks I will give it a try later today and probably come back with more questions and longer paragraphs

Categories

Resources