Related
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
My Tilt was last connected 6 days ago on 5/7. But today it will not connect. But before I begin, I DID search the forum. I am running Windows Vista Ultimate 32-bit. Neither Windows Mobile Device Center or Sync Center see my device. I tried starting Active sync from the Connection manager screen but it wont connect.
The only change between now and then was adding a 250gb external hard drive. And I just disconnected it from my computer and no change. The computer attempts to connect to the Tilt and plays the USB connect sound, then a bit later will sound the USB disconnect sound. I checked device manager and saw nothing out of the ordinary. I checked every USB Root Hub and none of them listed my Tilt. I went into event viewer and this error came up:
Log Name: Application
Source: RapiMgr
Date: 5/13/2008 6:31:20 AM
Event ID: 6
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Aaron-PC
Description:
Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="RapiMgr" />
<EventID Qualifiers="49152">6</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2008-05-13T10:31:20.000Z" />
<EventRecordID>2600</EventRecordID>
<Channel>Application</Channel>
<Computer>Aaron-PC</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
</EventData>
</Event>
Click to expand...
Click to collapse
I am getting very annoyed with this. I dont want to delete the partnership since it will erase my calendar off of the device.
I have the Tilt connected directly to the back of the computer and I tried more than one port on the back.
Please help!!
ok so what happens on another computer?
you might try going to a restore point on your pc to the last time it worked.
start/accessories/system tools/system restore
in case your system updated and changed something.
EDIT: disconnect your device. restart the PC. restart your device. after boot is complete on both devices then reconnect the device.
I honestly wouldn't do anything like that until you can find out if it works on another computer. I have heard of and seen a few jacked up mini- USB ports.
ChumleyEX said:
I honestly would do anything like that until you can find out if it works on another computer. I have heard of and seen a few jacked up mini- USB ports.
Click to expand...
Click to collapse
I second that advice!
I had similar issues with windos mobile device center. I can't remember how I fixed it exactly but it had something to do with a service needed for Windows Mobile Device Center to run correctly. Check all of the services related to mobile and make sure they are all running.
I took the phone to work and had another usb cable. It connects and XP tries to find a driver. The device charges on both.
EDIT: I tried ending the partnership and it wouldn't reconnect.
I was able to get it to sync. I had to turn off the use high speed usb option. So I am not sure if I will ever be able to go back to the other form of syncing.
I went to the AT&T store in my area and they rep who sold me the phone came right over and asked if everything was going OK with the phone. I explained the problem and he recommended doing a soft and/or master reset. So with instructions in hand, I got up this morning and backed up all my data to the SD card, then ran the master reset. Same problem!
Have you tried uninstalling Windows Device Center and reinstalling it, also making sure its an updated version?
Yeah, just did that. It will connect with WDC but wont sync. Very annoying. Going to try to ebay the phone.
Aaron78 said:
Yeah, just did that. It will connect with WDC but wont sync. Very annoying. Going to try to ebay the phone.
Click to expand...
Click to collapse
Ebay the phone I will give you a 20 for it?
-McMex
250 and you have a deal.
Hahahahaha
Aaron78 said:
My Tilt was last connected 6 days ago on 5/7. But today it will not connect. But before I begin, I DID search the forum. I am running Windows Vista Ultimate 32-bit. Neither Windows Mobile Device Center or Sync Center see my device. I tried starting Active sync from the Connection manager screen but it wont connect.
The only change between now and then was adding a 250gb external hard drive. And I just disconnected it from my computer and no change. The computer attempts to connect to the Tilt and plays the USB connect sound, then a bit later will sound the USB disconnect sound. I checked device manager and saw nothing out of the ordinary. I checked every USB Root Hub and none of them listed my Tilt. I went into event viewer and this error came up:
I am getting very annoyed with this. I dont want to delete the partnership since it will erase my calendar off of the device.
I have the Tilt connected directly to the back of the computer and I tried more than one port on the back.
Please help!!
Click to expand...
Click to collapse
This is actually easy and it is a well documented issue. Go to "Settings", "Connections" and "USB to PC" and uncheck the "Enable advanced networking capability". Your Tilt will then sync with Vista.
I am not sure why this is such a secret. Microsoft is well aware of this issue.
aretzios said:
This is actually easy and it is a well documented issue. Go to "Settings", "Connections" and "USB to PC" and uncheck the "Enable advanced networking capability". Your Tilt will then sync with Vista.
I am not sure why this is such a secret. Microsoft is well aware of this issue.
Click to expand...
Click to collapse
Don't see this as being the issue as I am running Vista as well and don't need to uncheck the advanced capability.
everything becomes an issue when one doesn't want to learn.
I noticed there was a "USB to PC" mode in \settings\Connections\USB to PC but for a start I don't get prompted if I check "Ask about connection type when I connect" and if I force "Disk Drive" then it appears as a letter on my WinXP lappy, but I only see a strange "mzÉ" file. Haven't dared copy new stuff. Anyone have the same problem?
Will switch back to AS for now, it's the fastest I've ever seen on a PDA!
Wow this gets worse, the whole content of "internal storage" is now all garbled up, WTF ?!
Ok, tried to reformat "internal storage" with Resco but it won't let me, says it's locked...
The \system\clear storage applet has an option to format the internal storage only fortunately, let's see...seemed to work ok but now I have a file called : EncFiltLog.menc when I connect the Diamond, not looking good !
hard reset gives the option to format all starage including movinand, which is the internal storage... As far as I know it might be your only option.
Yes, that helped, so far so good, wonder what happened earlier on...seems ok now
Also happened to me twice and had to do hard reset twice too, now i am afraid to plug my Diamond to my USB. Thought its virus. Guess its not only me, Any ideas what happened here
Not sure what happened, did either of you guys allow your PC to format the storage once you attached to it as USB Storage Mode?
Oh no !
What I wasn't getting before I opened that menu is the choice between AS and Disk Drive although maybe it was forced to default to AS, box was checked though.
Seems ok, now...
hey guys,
im new here and its also my first ppc.
ive got the following problem:
me (or my ppc) is not able to connect with activesync...
wtf can i do??
plz help me, thx,
LuFo
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
so, here we go:
ive got as 4.5 on my pc and ive recognized also that some other guys (even with older as) could connect to my ppc...
so, what is thie fckn prob??
again: plz help, what should i do?
greetz
PaulusUK said:
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
Click to expand...
Click to collapse
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
LuFo Diamond said:
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
Click to expand...
Click to collapse
untick the advanced network functionality in the connection settings USB to PC and try again ...
swampy said:
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
Click to expand...
Click to collapse
2nd that. Try another USB port on your PC. Sounds like there's either the driver missing (which should only be the case if you do not have Active Sync installed)
OR
try to disable the "Advanced network functionality". Can be found at 'Settings > Connections > USB to PC'. (Einstellungen, Verbindungen, USB zu PC oder so).
Do you have some sort of firewall software?
like, ZoneAlarm or antivirus with firewall?
disable them or allow the port as trusted and you should be fine
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
LuFo Diamond said:
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
Click to expand...
Click to collapse
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
here it is
LuFo Diamond said:
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
Click to expand...
Click to collapse
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
cJosephaq said:
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
Click to expand...
Click to collapse
Try the search engine before you post, recently there where alot of topics on ActiveSync not working. Anyway, the way your PPC will act when you connect it to a USB port can be setup in setting, connections, usb to pc. Mark Diskdrive or ActiveSync.
There you should also unmark the advanced network functionality. Check it off and try again.
Rgds,
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
cJosephaq said:
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
Click to expand...
Click to collapse
A Hard Reset should bring it back to it's default value so yes I see no problem there ...
Blazeitup123 said:
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
Click to expand...
Click to collapse
THX a lot, but all these programs are NOT running, ive tryed to run them and its juts possible tu run mobsync.exe mannually...
so this way would not work for me,
im sorry
on6hp said:
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Click to expand...
Click to collapse
my pc works with xp prof sp3
abinan said:
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Click to expand...
Click to collapse
jeah, this possibility is also told as the first option but , im sad, not the solution...
greetz
I know this question is noob, but please forgive me guys, I've just got my phone this afternoon.
I have done a search on this box and on the web but not found any solution. Could you guys please help me to connect my HTC Dream to my computer? I have install HTC Sync 2.04, but it doesn't recognize my phone when I plug it in. And, by the way, can I connect to internet through my computer, like the way I did it with my O2 Atom Life through Active Sync?
Thanks so much.
I have download HTC Sync and follow the instructions found on the website, but I didn't see any notification shown that my phone has connected to the computer. So what do I do now?
Plug in your USB cable to the pc and the phone. After a second, go to the phone and slide down the notification shade (the top bar) you should see a thing that says USB connected. Tap that. Then a box will pop up and ask you to mount your phone. Tap mount and your pc will register it as a removable disk.
When you are finished, go back to your phone and slide the shade back down, tap the USB connected thing again, then click unmount before unplugging the cable from the phone. This will save the sd card from becoming corrupted.
That should be the way to read the MiniSD card from computer shouldn't it? I have done that and I still find that I can't make HTC sync work actually. The issue is, can my phone connect to internet through my computer?
The Dream is a Google experience phone. The firmware is built from the Google source code and nothing more. HTC Sync requires an app to be installed on the phone which I believe is wrapped up in the HTC framework. Our google phones don't have those frameworks by default so, we can't 'push' it back in.
It's included on the HTC Branded phones (Magic and Hero) so ROMs ported from those devices do have it included and of course the required frameworks. Thing is, hardly anyone uses HTC Sync, so the ROM devs remove them to make 99% of us happy. Sorry, but the Dream was never intended to use HTC Sync. If you're desperate, flash Haykuro's 6.0 ROM.
So does it mean that my phone will not be able to connect to internet through my computer, or is there another way round? I prefer connect this way, since wifi is not always available in my place...