Often when my phone rings (its usually in my pocket) i accidentally reject or answer the call (because the touch screen is so sensitive)
do u have any ideas what can i do about this problem
Thanks
Mmmm...
You can flash a cooked ROM with the newer TACHI dialer installed. This has 'Slide to Answer' feature so that would cure your problem. Or, if you're not into flashing, try this. It's the best screen locker on the planet (just my opinion), but best of all, it's free
thx i will try the locker
S2U2 is very nice!
TouchLockPro is also free and has a lot of sensor based features to add functionality to your Diamond.
And when I first started using my Diamond I paid for PocketShield.
grahamkdt said:
You can flash a cooked ROM with the newer TACHI dialer installed. This has 'Slide to Answer' feature so that would cure your problem. Or, if you're not into flashing, try this. It's the best screen locker on the planet (just my opinion), but best of all, it's free
Click to expand...
Click to collapse
oh thankyou, thank you .... I was on the point of binning my Ignito because of the stupid stupid case that answers sms and incoming calls. This app seems to work. Did I say thank you
Mike
Related
Hi,
Has anyone got the s2u2 Slide to Answer feature working?
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
If you press the screen, it seems that the TouchFlo is getting priority, as the Answer or Ignore buttons will work, even if they aren't actually being displayed.
Anyone managed to get this working properly?
I'm using S2U2 version 1.03.
Thanks for any suggestions.
Regards,
Ben
ben_gb said:
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
Click to expand...
Click to collapse
lol
That sounds like fun.
I suppose you can disable TouchFLO 3D, although you probably don't want to do that. You might be able to stop TouchFLO 3D from handling calls with a registry edit, although I doubt it...
I have the same problem. After several tries, I found two solutions. The first one is using AdvanceConfig to disable 'phone skin', after restart, s2u2 works properly. But the dialpad is no longer the diamond style. The second one is to install another dialpad to replace the existing diamond dialpad.
But i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
So can you still utilize all the other S2U2 goodness besides S2A feature? If so, I'd happily turn off S2A and keep all else. Though a proper solution would also be the preference.
yes, other functions work in a good condition
i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
has someone found a solution?
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
bin862cn said:
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
Click to expand...
Click to collapse
how could you block the touch function when there is an incoming call?
ageye said:
how could you block the touch function when there is an incoming call?
Click to expand...
Click to collapse
I'd like this answer too, i love so much s2a and the other functions but i love the classical tflo dial pad(i'm a little bit confused about all the tweaking and installing out the box apps that may get in conflict with others!)
However i still think that Diamond will be a superphone in one month or two with all the geniuses around here
There is another thread with exactly this issues. If you have managed to block the touch screen and just allow the hard keys, how did you do it?
up up.
Does anyone found a solution? My S2U2 worked great, untill this morning.....Now I have the same problem.
How can help.....
You can keep touchflo3d dial pad with S2U2, just have to edit registry "HKLM\Software\HTC\Biotouch" make a new Key called "Disable4SpecificApp", and inside this another one called "S2U2", inside this a new string wich "value name" is "classname" and its "value data" is "S2U2"
Hi there,
is there someone with a ringtone manager working?
I've already tried the last versions of mRing and Ringo, with no success.
mRing, doesn't work
Ringo, works but i can't mute incoming calls :\\
Open to suggestions, this topic can help alot of users with this issue.
Thanks all.
No one uses ringtone manager on your Diamonds??
Thanks
rockas said:
No one uses ringtone manager on your Diamonds??
Thanks
Click to expand...
Click to collapse
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers
I am using Photo Contacts Pro. This comes with Ring Manager, SMS contact rings as well as profiles.
Works well for me.
It looks interesting...
I didn't know that software...
To customize sms, it should be perfect
http://www.pocketx.net/products/photocontactspro_ppc/index.html
unvisigoth said:
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers
Click to expand...
Click to collapse
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?
rockas said:
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?
Click to expand...
Click to collapse
Yes it does. My version is 4.03. The inital screen seems a little bit confused but it seems work well. Try do disable phone skin and try mring again. Disabling phone skin you gain about 10 MB of free ram. If you like the skin that comes with the diamond try to disable it and use S2U2. It's better, lighter, and with a lot of settings.
Cheers
where can i get S2U2?
http://forum.xda-developers.com/showthread.php?t=381588
thanks for the help
I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers
Problems with Photocontacts Pro with Diamond
biggggant said:
I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers
Click to expand...
Click to collapse
Hi! Also I have , not one but a lot of issues with the Photo contacts Pro in my Diamond. I really thing that it does not work with that device.
First I installed the last version 5.09 and had a lot of problems (rings, answering the calls, Extended menus of the Today's Plug-in,.....). Wit the older version 5.08 it seems that works a little better, but the Today's plug-in has some very big text, wich make the Today's Screen a real mess.
Best regards!
Simplest One
Use this freeware to add custom ringtones to contacts/ categories etc.
mine had stopped working after a soft reset following changing the registry location to the sd card so am very pleased to have found such a small app that assigns individual tones to contacts, thankyou
Here is a my theme for S2A with curtain lock setup.. I truly hope you all enjoy.
God Bless..
Portrait
Slide to Answer
During Call Screen
During Call Curtain Lock Active
Landscape
During Call
http://www.filesavr.com/godzson-s2alock
what dialer is this and does redial work? Please assist me if possible
how did you get a mute button on s2a??
That is realy beautiful! Good work! God bless you!
Sorry but I don't have a clue how this works???
Is this a skin for S2U2 ( using 1.40 never seen this beautiful S2A) or is this only for latest HTC (a built-in S2A skin)???
best regard and anyway look good (snifff)
This is a skin for the HTC dialer with Slide / Ignore feature.
This is NOT a skin for S2U2.
What resolution was this made for, vga?
i grabbed the file names out of the xml in the cab so i think i'm going to work on skinning the opal dialer in qvga....
Thanks much Godzson!
joel2009 said:
What resolution was this made for, vga?
i grabbed the file names out of the xml in the cab so i think i'm going to work on skinning the opal dialer in qvga....
Thanks much Godzson!
Click to expand...
Click to collapse
This is for VGA.. glad to share.. Have a blessed new year..
johanromijn said:
This is a skin for the HTC dialer with Slide / Ignore feature.
This is NOT a skin for S2U2.
Click to expand...
Click to collapse
Here is a my theme for S2A with curtain lock setup.. I truly hope you all enjoy.
Click to expand...
Click to collapse
S2A is that not an AC feature.
so this throws me off. seems like its for it as refered to by an ac name. s2a
Thats like saying burger is registered trade mark of someone
You can get burgers all over the place, its just a type of "sandwhich"
s2a is just a feature, not just a program by a great guy like ac
yes i follow..
but heres what im saying..
i have only seen s2a refered to by anything related to ac.
ive seen slide to answer
slide to unlock
but s2a.....
see what im saying.
so you think, hey another feature for s2a but its not a feature, its a solo program..
thats all i am saying.
and the topic title is very bland. S2A & CURTAIN LOCK
well whats s2a?
if someone where to post WM games
you would think oh its for windows mobile.
but you go in and its Wireless Media Games.
so to some it up, its just a bit weird to me.
in my opinion only, needs a small rename so that its not confused, or hinted to be related.
thats all.
But S2A is a feature in A_C's S2U2, not a separate program. I agree, however, that there needs to be some clarification. Maybe mentioning that it's for the HTC dialer would be enough?
Seemed pretty clear to me, specially if you've seen several of the other threads posted talking about the necessary files being yanked from the Touch HD.
By the way, good job Godzson.
Is this for MrHawiis slide to answer or for the leaked rom one?
i may be wrong, but i don't think ac's version has a curtain. s2a just intercepts the call, i doesn't act as a dialer
rjmjr69 said:
Is this for MrHawiis slide to answer or for the leaked rom one?
Click to expand...
Click to collapse
It's not the leaked ROM, it's a skinned version of the one from the Touch HD.
joel2009 said:
i may be wrong, but i don't think ac's version has a curtain. s2a just intercepts the call, i doesn't act as a dialer
Click to expand...
Click to collapse
This is actually the HTC dialer functionality from the Touch HD. It's just been ripped and added to the Diamonds and Touch Pro's.
i know what this is for
i was pointing out the obvious differences to everyone argueing the name change.
for those that don't know about the hd s2a feature and recent releases of it, i could see how they might think it's related to s2u2 (since it's been around forever). clarification may help unfamiliar users. couldn't hurt? perhaps godzson can put a link on the OP for s2a and curtain, so those people know what exactly the skin is for...
joel2009 said:
i know what this is for
i was pointing out the obvious differences to everyone argueing the name change.
Click to expand...
Click to collapse
Ohh, sorry, my bad.
I tried this on my touch pro and it did not work correctly. After it installs and reboots, I call up up the dialer and it brings up the stock WM dialer but with corrupt graphics.
Hey guys,
I just did like 5 different google searches through the site and I cant find the HTC Black Dialer/Phone Canvas cab.
Does anyone happen to have one?
Thanks a bunch!
Daniel
You didn't look hard enough I tell you
right on!!!
Honestly I did, the closet thing I found where the black IMG files from LantisOS ROM, but that didnt include the phone as well.
Thank you for the cab!
EDIT: Im trying to install this on top of Da_G's latest 6.5 ROM, and I am still getting the default Windows Dialer...do you know what I can do to make this work?
Yes, sometimes it's hard to find certain things. I simply wanted to find the black manila start panel skin for my TP and it took me hours but I finally found it.
Is there a version without the slide to answer?
I installed this cab and love the look but have been experiencing a glitch; the on-screen buttons get blurryed and are not responsive once a call is dailed and I press send. I cannot access the speakerphone/note/end call etc that are displayed in a blurred fashion...anyone else getting this?
D3TH METAL said:
Is there a version without the slide to answer?
Click to expand...
Click to collapse
I am not sure whether this is what you are looking for, but it really looks cool
http://forum.xda-developers.com/showthread.php?t=438412
bugsy714 said:
I installed this cab and love the look but have been experiencing a glitch; the on-screen buttons get blurryed and are not responsive once a call is dailed and I press send. I cannot access the speakerphone/note/end call etc that are displayed in a blurred fashion...anyone else getting this?
Click to expand...
Click to collapse
I think it might be possible that it is the in call curtain you see. Have to slide it down to access buttons behind it.
jmckeejr said:
I think it might be possible that it is the in call curtain you see. Have to slide it down to access buttons behind it.
Click to expand...
Click to collapse
I think you are right, thanks for the info!
Well this one was the charm for my Sprint TP. Works Great, and did not foul anything up
to whoever said they tried the s2a on wm6.5 with no luck.. I believe that the dialer is still an issue with wm6.5 that has yet to be fixed..compatability issues between htc and m$ i think..I also tried installing s2a and when i would receive a call the screen would glitch and switch between the traditional 6.5 slide to answer, the older 6.1 style answer screen, and the s2a screen lol very glitchy...
Hi everyone, i need help.
Is it possible to call out the keypad during a call?
I have to dial a choise during a call with operators but i dont know how to call out the keypad.
I have a cooked rom, precisely Benko 4.0 clean rom
Thx in advance
The answer should be right in fronyt of your face; literally. At the bottom left screen should be an option to recall the keypad when in call. If it is not there then the cook modified the SW when making it. If that's the case you should ask them. This really should've been posted in the Benko ROM's thread; you probably would've gotten a quicker answer.