Database Develop

Problem solved I guess...

After hard resetting my device I could not activesync. My pc says device unkonwn (connected device has malfunctioned). I tried to use pocket mechanic on my device to reformat my sd card and it also says "error... a device attached to the system is not functioning". On my computer under driver details - driver node strong name it said ".../baddevice/..."
I tried putting phone in bootloader mode and running KaiserRUU to install new rom device shows serial then plug to PC says USB but nothing happens RUU says no device found or whatever.
I tried to SD flash a new ROM from via bootloader...white screen flashes says No Image File Found! Then goes back bootloader screen...
I would appreciate anyone that can help or point me in the direction of where to get help with this cuz i know and have done all the basics to solve the problem I think and its just not working...
Edit: I just plugged my phone up to the computer using my girlfriends usb cord to her sidekick and wouldnt you know the pc start building a new driver for my device... so i guess even tho the original usb cord malfunctioned or something... funny tho it would still charge my phone and show USB in the bootloader screen... Back to flashing

DP
double posting is a no no
http://forum.xda-developers.com/showthread.php?t=412060

Oh i posted here cuz they said i shouldnt have posted there...

phantomy2g said:
Oh i posted here cuz they said i shouldnt have posted there...
Click to expand...
Click to collapse
yes but nobody told you to post it here. The first time you posted it was in Garmin's thread, which is fine because that is the rom you flashed, although, it is not rom specific. You created two additional threads and received enough information to figure it out.
If you haven't figured it out you can always try this:
1) close all windows mobile device center and active sync applications on your pc task manager
2) uninstall windows mobile device center from your pc and reboot
3) reinstall windows mobile device center to your pc
4) insert usb cable into your device
5) when windows mobile device center opens select "connect without setting your device"
6) remove usb
7) reinsert usb then select set up your device
This is how I get active sync to work when I have the issue you are experiencing.

redbandana said:
yes but nobody told you to post it here. The first time you posted it was in Garmin's thread, which is fine because that is the rom you flashed, although, it is not rom specific. You created two additional threads and received enough information to figure it out.
If you haven't figured it out you can always try this:
1) close all windows mobile device center and active sync applications on your pc task manager
2) uninstall windows mobile device center from your pc and reboot
3) reinstall windows mobile device center to your pc
4) insert usb cable into your device
5) when windows mobile device center opens select "connect without setting your device"
6) remove usb
7) reinsert usb then select set up your device
This is how I get active sync to work when I have the issue you are experiencing.
Click to expand...
Click to collapse
I apologize again just really frustrated... Will try above right now thank you very much for ur help

Well that didnt work... I dont think it is my computer... this has to be something with the device its self... and if anyone knows for sure please let me know wut to do...

What can I say other then Vista Mobile Device Center Sucks Major.
Best way to see if its your device, try to sync it with another computer, borrow a friend's or try at work.
Go in to ActiveSync on your device, and Menu -> Options. Select the Windows PC and Delete. That may help too.

JimmyMcGee said:
What can I say other then Vista Mobile Device Center Sucks Major.
Best way to see if its your device, try to sync it with another computer, borrow a friend's or try at work.
Go in to ActiveSync on your device, and Menu -> Options. Select the Windows PC and Delete. That may help too.
Click to expand...
Click to collapse
I cant even select options... but i will try on another computer

OK. If you can't select Options that Means, i think, that there is no Partnership set up.

JimmyMcGee said:
OK. If you can't select Options that Means, i think, that there is no Partnership set up.
Click to expand...
Click to collapse
yeah i cant set up a partnership... the device is running normally but not functioning properly... ive tried multiple resets and all other suggested methods to get activesync working but the problem is my phone

Originally Posted by JimmyMcGee
Go in to ActiveSync on your device, and Menu -> Options. Select the Windows PC and Delete. That may help too.
Click to expand...
Click to collapse
phantomy2g said:
I cant even select options... but i will try on another computer
Click to expand...
Click to collapse
Did you try this after having first removed usb?

oh brother.another noob looking to be spoonfed

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Anyone wanna place money on whether or not he has changed cables and/or researched the pin issue?

redbandana i thought you said you were done with xda posting wise?

Ok fellas i am a noob kinda... been fooling around on hear for about 6 months now Ive flashed my treo 750 and tilt many times never ran into this problem. But i have a question... When changes our made to the registry are they not changed back when u do a hard reset?

pazookie said:
redbandana i thought you said you were done with xda posting wise?
Click to expand...
Click to collapse
no I am not done. Sometimes we go out for too long, I get drunk, rant like an idiot, then pass out.

phantomy2g said:
Ok fellas i am a noob kinda... been fooling around on hear for about 6 months now Ive flashed my treo 750 and tilt many times never ran into this problem. But i have a question... When changes our made to the registry are they not changed back when u do a hard reset?
Click to expand...
Click to collapse
when you make changes to your registry and you perform a hard reset everything you altered in the registry resets back to when you flashed the new rom, "fresh out of the flash" sort of speak.

Problem Solved
I just plugged my phone up to the computer using my girlfriends usb cord to her sidekick and wouldnt you know the pc start building a new driver for my device... so i guess even tho the original usb cord malfunctioned or something... funny tho it would still charge my phone and show USB in the bootloader screen... Back to flashing

Bricked Droid 3

Can't get my phone into recovery at all after trying to get the new up date. Only way it comes on is by plugging it into the wall, and the only way to get it to turn off is to pull the battery. Besides the Motorola sign when it is on, that is all it does right now. I think what caused this is using safestrap instead of boot strap. Here are more details from a convo with an acquaintance. BTW, I've tried the technique for getting it to boot in recovery a 1000 times but have been unsucessful.
Re: Droid 3 mod
Quote:
Originally Posted by Senator
Quote:
Originally Posted by Grimace
Quote:
Originally Posted by Senator
Quote:
Originally Posted by Grimace
Quote:
Originally Posted by Senator
Quote:
Originally Posted by Grimace
I need to run something by you if you got the time. Hit me back if you do. BTW, here's a screen shot with the DarkDroid ROM. I'm pretty proud of it being a noob at this stuff and all.
homescreen looks sick man. Liking the launcher too.
Been waiting on the Galaxy Nexus...going to drop my X for this.
What's up?
Thanks. Btw, I fell asleep waiting on the files to transfer to my phone. When I woke up it was bricked
I backed up EVERYTHING on the sd, I just need to figure out how to get the phone past the bootloop now. Hopefully I can get it done connected to the laptop, but any advice would be appreciated. The guys on xda were a little vaugue on the directions.
Did you clear data/cache before installing the files?
I would boot back into recovery and do this. It won't delete the files you just installed, just all the old data (system settings, etc) in your phone.
I'd try a few battery pulls first.
If that doesn't work, enter into recovery from here:
http://www.mydroidworld.com/forums/d...-recovery.html
And wipe data/cache, then reboot.
If I plug it into a power source, the motorola emblem comes up, but nothing else. It won't even power off. Power + X or M doesn't do a damn thing, and if I plug it into my computer it also does nothing at all. The laptop doesn't even recognize it or even try to charge it as far as I can tell.
After Power + X did you hit the volume buttons in the guide like it says?
You probably did but just wanted to make sure.
You're only other choice seems to flash a fastboot file.
These are about the easiest instructions you'll find.
I've never done on a D3, but looks right to me.
http://rootzwiki.com/topic/4370-sbf-...959-and-56890/
Don't turn on your phone to charge it, leave it off and charge it.
Unless you can tell me how to install/uninstall programs located on the internal and external memory of the phone when I can't get it to turn on (even in recovery mode), I'm fairly certain I'm screwed. I believe that my only hope originally was to be able to access the memory via laptop to be able to get it into recovery. That ROM I put on had to use this http://www.hash-of-codes.com/files/Droid3Safestrap.apk, which won't work for the factory update, which has to use this http://download.clockworkmod.com//te...3Bootstrap.apk. So even though I have all the programs that I need on the memory of the phone to get the factory update then reinstall the custom ROM, I can't get the phone on so that I can install and uninstall the programs necessary for recovery. I should never have messed with my phone when I was half asleep to begin with.
Click to expand...
Click to collapse

Well, I finally got it into put after working on it since 7am.

Look at my post on the 5 minute unbrick if you need it
Sent from my DROID3 using XDA App

ChaoticWeaponry said:
Look at my post on the 5 minute unbrick if you need it
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Well, I got it unbricked, but it was a real trick to get it done. Like I mentioned before, I suspected an issue with battery power, because when it was plugged in for charging, the screen stayed on with the motorola logo displayed. As everyone knows, this uses a lot of power. Even being plugged in to the wall (phone WOULD NOT turn off), it was using most of the power that was supposed to be charging the battery. This is what I did to bypass the problem.
1. Let charge all night
2. Hit X + power (M + power WOULD NOT work) simultanously,then slowly inserted phone end of USB cord that was already plugged into the wall
3. After the Motorola logo displayed on the screen, I closed the keyboard and waited for the Andoid avatar to be displayed. Once he popped up, I hit the volume button up and down at the same time, which FINALLY got it into recovery.
4. Factory reset by toggleing to that option and hitting power button.
5. Once factory reset was complete, I selected the ZIPPED leak update and hit the power button.
6. After update completed, system reboot. Phone kept its root status and the DarkDroid ROM

Btw, does this info look right (asking anyone who knows). Phone is supposed to be updated with Verizon update, rooted, and running DarkDroid ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

everything looks up to date!

i thought the new version was 5.7.x? wasnt the old one 5.6.890?

MrJudylicious said:
i thought the new version was 5.7.x? wasnt the old one 5.6.890?
Click to expand...
Click to collapse
You are correct my friend.

MrJudylicious said:
i thought the new version was 5.7.x? wasnt the old one 5.6.890?
Click to expand...
Click to collapse
ChaoticWeaponry said:
You are correct my friend.
Click to expand...
Click to collapse
Well crap, here I go again...

Hashcode said:
** And, I know that the file name is our current version. It's something Verizon does with the patch filenames where they use the version of the OS that it applies to.
ChaoticWeaponry said:
You are correct my friend.
Click to expand...
Click to collapse
What about what I quoted from Hashcode?
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Grimace78 said:
Hashcode said:
** And, I know that the file name is our current version. It's something Verizon does with the patch filenames where they use the version of the OS that it applies to.
What about what I quoted from Hashcode?
Click to expand...
Click to collapse
Verizon is weird about their update names. if youre going from 1.1.1 to 2.2.2, then the update name would be Verizon.1.1.1 I have no idea why.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Lg Black Optimus is only on the screen of lg!

hi guys, I need your help, I have a lg optimus black, and installed the 2.3.4 version of the android official v20n, and did not like because I still had no way to root, so I wanted to return to the android 2.2, before returning did a factory reset, so that when the phone restarted he only stayed on the screen of lg, i removed the battery and put back, the phone rang often, but now, all life that I hang up and call him again he is on the screen of LG, then I have to remove the battery, wait a while, and there again put the phone connects normally, but I'm worried, because all this started after I did a factory reset, help me please.
Thanks in advance.
Now my phone does not pass the screen of lg or removing the battery, help me!

Well, it is very important to factory reset after you downgrade. Use search, everybody recommends it.

read unbrick guide

I have used the method of cell brick, and to no avail, I'm about to give up.
Someone else could help me?

davifs said:
I have used the method of cell brick, and to no avail, I'm about to give up.
Someone else could help me?
Click to expand...
Click to collapse
Do THIS exactly step by step and it'll work.
If not, you're doing something wrong.

does your phone go to "software update" state after pluging the cable in while holding volume up button?
give us more info about what is happening...

I've used this tutorial http://forum.xda-developers.com/showthread.php?t=1448803, I tried to use their own software lg, went into the mod emegência, typed my imei, I put the model, I hit vol + and put the usb cable, the screen s / w upgrading, and made the process, but to no avail it does not leave the screen lg, I'm almost sending him into the service.

davifs said:
I've used this tutorial http://forum.xda-developers.com/showthread.php?t=1448803, I tried to use their own software lg, went into the mod emegência, typed my imei, I put the model, I hit vol + and put the usb cable, the screen s / w upgrading, and made the process, but to no avail it does not leave the screen lg, I'm almost sending him into the service.
Click to expand...
Click to collapse
So do you get to the screens where it says software Update or so? If you get there, I would try to do the trick at another PC, since it doesnt seems to work on all operating systems. Mine e.g. with win XP wouldnt wanna do it once, but with Win 7 64 bit I was able to do it.
Can you give us a screen, where we can see ur screen when connected to USB while holding Vol UP button?
And not only HIT the vol UP button, but hold it, until the software update screen comes up. Otherwise it wont get there

Man is and my windows 7 64 bit, I've tried all processes.
Lg Software update
v10b my lg optimus black came with version 10b, this did not work.
KDZ
v10a
v10b
v20n
Also failed.
Smartflash tool
v10a
Nor did it.
I do not know what else to do anything more than right.

Anybody from your country here? Who can try to fix it for u? If not, you can also send it to me, just write a message... or give it back to lg support center

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried the latter case, the program hangs there, the phone restarts and is the logo of lg.

LOL! You need to upload the picture to somewhere and post the link then or go to advanced settings and the paperclip and upload it this way Since this is a Local path on your disk only

kkkkkkkkk, sorry. kkkk

Could you upload it in better resolution (higher quality), since I cant read anything at all... And pls discribe whats written there in red and other important messages in spanish (at least I think it is ) since my spanish also aint the best/ I never spoke it
And btw, its normal that it gets stuck at 4%, just try again, wait till phone reboots and enjoy otherwise you know what to do

N00BY0815 said:
Could you upload it in better resolution (higher quality), since I cant read anything at all... And pls discribe whats written there in red and other important messages in spanish (at least I think it is ) since my spanish also aint the best/ I never spoke it
And btw, its normal that it gets stuck at 4%, just try again, wait till phone reboots and enjoy otherwise you know what to do
Click to expand...
Click to collapse
I think is portugues but yeah is low quality and can't read it

I tried that method the phone restarts, but to no avail he gets on the screen of the LG, the four flashing LED keypad, now wanted to try this method here http://forum.xda-developers.com/showthread.php?t=1396091 I do not understand, I'm Brazilian.

davifs said:
I tried that method the phone restarts, but to no avail he gets on the screen of the LG, the four flashing LED keypad, now wanted to try this method here http://forum.xda-developers.com/showthread.php?t=1396091 I do not understand, I'm Brazilian.
Click to expand...
Click to collapse
I don't know but I think that method requires a bit of programming skills, I don't understand it either...
have you tried this one??http://forum.xda-developers.com/showthread.php?t=1448803 I think is better explained so is a bit easier to understand

I've also tried but did not, does not have a specific firmware to make my OB back to life?

davifs said:
I tried that method the phone restarts, but to no avail he gets on the screen of the LG, the four flashing LED keypad, now wanted to try this method here http://forum.xda-developers.com/showthread.php?t=1396091 I do not understand, I'm Brazilian.
Click to expand...
Click to collapse
Hi davifs, the smartfash tool should have solved your problem.
Today I made the V20N to V10 even with factory reset it boot looped.
With SmartFlash problem solved.
Give us more info.

My Samsung Galaxy Ace won't turn on!!!!!

Hello, recently i've flashed my galaxy ace with rom manager (ClockworkMod) so i can make the partition thing to my sd card, so i flashed it, turn it off, and then i won't turn on. I can't even charge my phone! I tried to turn it on in reboot mode but it doesn't do anything. I even tried to turn on download mode and nothing. Not even the samsung logo shows up. Nothing! I'm desesperated, I don't know what to do now. I'm new in this forum, so I will be very very thankful if someone could help me on this. Please.

First, ROM MANAGER BRICKS SAMSUNG GALAXY ACE!
Second, YOUR PHONE IS DEAD. TRY A USB JIG OR GOTO SERVICE CENTER.
Third, WHO TOLD YOU TO USE ROM MANAGER?
Fourth, LIE TO SERVICE CENTER TELLING THAT YOU WERE CHARGING YOUR PHONE AND IT TURNED OFF AND IT NEVER TURNED ON. DO NOT MENTION WORDS LIKE "BRICK","ROOT","ROM MANAGER".
Fifth, Welcome to the world of XDA Developers. DO read the threads with a pin icon in front (A.K.A Sticky)

Xr01d_GT said:
First, ROM MANAGER BRICKS SAMSUNG GALAXY ACE!
Second, YOUR PHONE IS DEAD. TRY A USB JIG OR GOTO SERVICE CENTER.
Third, WHO TOLD YOU TO USE ROM MANAGER?
Fourth, LIE TO SERVICE CENTER TELLING THAT YOU WERE CHARGING YOUR PHONE AND IT TURNED OFF AND IT NEVER TURNED ON. DO NOT MENTION WORDS LIKE "BRICK","ROOT","ROM MANAGER".
Fifth, Welcome to the world of XDA Developers. DO read the threads with a pin icon in front (A.K.A Sticky)
Click to expand...
Click to collapse
I never understand, that people who buys a new device, why don't read something about it??? Before I buy my Ace, I read a lot about it, I knew, that it's prohibited to use Rom Manager on Ace... There's a lot of info about it...

Another lost to the dark side of rom manager. Rip the poor thing.

Firstly..CWM ROM Manager?
and ROM manger for partition? all you needed was the CWM Recovery.
We have stickies here for a reason and if you dont read them, do not create new threads when you have problems..

a time try to flash my phone with new firmware, and my phone can't turn on, becouse one input of firmware wrong, and then i try to leave baterry and then, try to go download mode again and flash with new firmware, wait flashing finish and my phone can turn on again.
hopefully working with your phone.

v-ace-1 said:
a time try to flash my phone with new firmware, and my phone can't turn on, becouse one input of firmware wrong, and then i try to leave baterry and then, try to go download mode again and flash with new firmware, wait flashing finish and my phone can turn on again.
hopefully working with your phone.
Click to expand...
Click to collapse
Let's give a try, but I think it won't work. Rom Manager hard bricks Ace, and even download mode won't work. Bring it to service center...

armando58 said:
Hello, recently i've flashed my galaxy ace with rom manager (ClockworkMod) so i can make the partition thing to my sd card, so i flashed it, turn it off, and then i won't turn on. I can't even charge my phone! I tried to turn it on in reboot mode but it doesn't do anything. I even tried to turn on download mode and nothing. Not even the samsung logo shows up. Nothing! I'm desesperated, I don't know what to do now. I'm new in this forum, so I will be very very thankful if someone could help me on this. Please.
Click to expand...
Click to collapse
fashing your handphone via odin and you must download firmware in samfirmware.com
maybe your CWM not support or crash for yoaur handphone

armando58 said:
Hello, recently i've flashed my galaxy ace with rom manager (ClockworkMod) so i can make the partition thing to my sd card, so i flashed it, turn it off, and then i won't turn on. I can't even charge my phone! I tried to turn it on in reboot mode but it doesn't do anything. I even tried to turn on download mode and nothing. Not even the samsung logo shows up. Nothing! I'm desesperated, I don't know what to do now. I'm new in this forum, so I will be very very thankful if someone could help me on this. Please.
Click to expand...
Click to collapse
You can use usb jig to force boot into download mode but there's a small chance for it to work
Google usb jig
Sent from. . . . .NOWHERE!

Have you ever heard something like "don't do something unless you know what you are doing", well this is very useful. There's a reason that none on ace developement doesn't use or recomends ROM manager. Brick.
Sent from my GT-S5830 using XDA

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using Tapatalk

Xr01d_GT said:
Fourth, LIE TO SERVICE CENTER TELLING THAT YOU WERE CHARGING YOUR PHONE AND IT TURNED OFF AND IT NEVER TURNED ON.
Click to expand...
Click to collapse
This actually happened to my phone. Is it a known fault? Is there a way to repair it without taking it to a service centre 30 miles away?

Your device wont turn on?
I wonder why?
Perhaps its got something to do with the fact that you have broken your device into pieces. Not literally but oh well u get the point.
Sent from my GT-S5830 using xda premium

Sikorsky96 said:
Your device wont turn on?
I wonder why?
Perhaps its got something to do with the fact that you have broken your device into pieces. Not literally but oh well u get the point.
Click to expand...
Click to collapse
If you're responding to me, I don't get your point. I haven't broken it into pieces, literally or otherwise. I haven't modified the OS in any way since I got it. I plugged it in to charge. It is meant to be able to charge.

You're ace is brick go to repair centre if you have the warranty just say you don't know how this happen, or buy a new phone...

gn1989 said:
If you're responding to me, I don't get your point. I haven't broken it into pieces, literally or otherwise. I haven't modified the OS in any way since I got it. I plugged it in to charge. It is meant to be able to charge.
Click to expand...
Click to collapse
He isnt replying to you!

i face that problem too, after i search the entire thread in this forum then i found this method. try this, maybe it can help :
- pull out your battery
- press the vol down+home+power n in the same time then pull in your battery (if you can't do it alone, ask somebody to help you pull in the battery)
- wait (n pray maybe ) until download mode appear
hope it can help you..:fingers-crossed:

happened the same
i tried flashing stock rom froyo 2.2.1 from odin it cme up as pass but when i dsiconetted nothing happened my phone is ****ed help me anyone it wont even show the samsung logo what do u advise me to do i live in india should i go o the service center or what

Come on everyone!!
Rather than making snide comments, we SHOULD be helping him.
Here, check this out it helped my friend when he bricked his SGA.
Un-Bricking SGA
And remember, from now on use CWM Recovery, or if you want then use ODIN,
BUT NEVER, EVER USE ROM MANAGER. IT'S THE SHINIGAMI FOR OUR PHONE!!!

Another victim of ROM Manager. RIP.
Inviato dal mio GT-S5830

boot problem

hi, after installing busybox from google play and pressed install , my phone suddenly turned off. after that i couldnt turn it back on. im stuck at boot screen. i tried recovery mode and i tried the download mode, but nothing. i did factory reset and nothing. currently im trying to find a way to restore but my pc doesnt "see" the device if it cant boot. is there any way to do something to fix it ? any way. it was rooted. now after the factory reset which didnt do anything i suppose its not rooted anymore. its on jelly bean 4.1.2 . or at least it was when it could boot....

kessaras said:
hi, after installing busybox from google play and pressed install , my phone suddenly turned off. after that i couldnt turn it back on. im stuck at boot screen. i tried recovery mode and i tried the download mode, but nothing. i did factory reset and nothing. currently im trying to find a way to restore but my pc doesnt "see" the device if it cant boot. is there any way to do something to fix it ? any way. it was rooted. now after the factory reset which didnt do anything i suppose its not rooted anymore. its on jelly bean 4.1.2 . or at least it was when it could boot....
Click to expand...
Click to collapse
You can get into download mode right? Flash stock rom again through a kdz flashing method. You can find it here http://forum.xda-developers.com/showthread.php?t=2069723 and the stock firmware here http://lg-phone-firmware.com/index.php?id_mod=15

nmbbf said:
You can get into download mode right? Flash stock rom again through a kdz flashing method. You can find it here http://forum.xda-developers.com/showthread.php?t=2069723 and the stock firmware here http://lg-phone-firmware.com/index.php?id_mod=15
Click to expand...
Click to collapse
i cant step 6. to get to the s/w upgrade screen. it sais i turn off ,remove battery , hold down volume down, wait, plug in usb. ... i only get a blank screen with white/black stripes

kessaras said:
i cant step 6. to get to the s/w upgrade screen. it sais i turn off ,remove battery , hold down volume down, wait, plug in usb. ... i only get a blank screen with white/black stripes
Click to expand...
Click to collapse
That used to happen with me too a lot of times... Try more than once and after the s/w upgrade screen shows up leave it pressed more about 5-10 seconds. It only worked for me that way otherwise it would geta weird screen like yours and wouldnt get into download mode.. .try it

nmbbf said:
That used to happen with me too a lot of times... Try more than once and after the s/w upgrade screen shows up leave it pressed more about 5-10 seconds. It only worked for me that way otherwise it would geta weird screen like yours and wouldnt get into download mode.. .try it
Click to expand...
Click to collapse
volume down + power button + home. when screen turns off leave power button and keep holding home + volume down. this just tested and worked for 3 times in a row. if u check it, it would be nice if someone update the guide for anyone who need it in the near future. thanks. im now going to next step

kessaras said:
volume down + power button + home. when screen turns off leave power button and keep holding home + volume down. this just tested and worked for 3 times in a row. if u check it, it would be nice if someone update the guide for anyone who need it in the near future. thanks. im now going to next step
Click to expand...
Click to collapse
i get an error . look
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it sais device not found. but the guide doesnt say anything. it only sais to disable the device...

kessaras said:
i get an error . look
it sais device not found. but the guide doesnt say anything. it only sais to disable the device...
Click to expand...
Click to collapse
Try to run in compatibility mode with xp ... Got windows enabler on ?

i think the guide there at step 7 is a bit wrong. how can you disable the phone and flash the rom ? if the pc cant "see" the machine connected , is it even possible ? ...
it didnt work. when i installed the usb drivers the windows couldnt recognise the phone. i switched the driver from mobile to portable something. i had only 2 available choices at the manage section if i didnt check to show compatible only machines. after switching to that driver... ( curse windows and their bugs ) , automatically switched back to mobile.... and my phone was connected to my pc....after that i continued with the flash rom and now its back working. Thank you !!!!!!!!!!!!!!!!!!!!!!!! im new to android. i has iphone since years.

kessaras said:
i think the guide there at step 7 is a bit wrong. how can you disable the phone and flash the rom ? if the pc cant "see" the machine connected , is it even possible ? ...
it didnt work. when i installed the usb drivers the windows couldnt recognise the phone. i switched the driver from mobile to portable something. i had only 2 available choices at the manage section if i didnt check to show compatible only machines. after switching to that driver... ( curse windows and their bugs ) , automatically switched back to mobile.... and my phone was connected to my pc....after that i continued with the flash rom and now its back working. Thank you !!!!!!!!!!!!!!!!!!!!!!!! im new to android. i has iphone since years.
Click to expand...
Click to collapse
Well man, it worked for me the way the guide is, with some workarounds due to win7 incompatibilities.
If I helped you dont forget to hit thanks button ahah
I know the feeling, I had an ipod touch which I tweaked a lot, but since I had my first android... Can't even imagine going back to IOS

nmbbf said:
Well man, it worked for me the way the guide is, with some workarounds due to win7 incompatibilities.
If I helped you dont forget to hit thanks button ahah
I know the feeling, I had an ipod touch which I tweaked a lot, but since I had my first android... Can't even imagine going back to IOS
Click to expand...
Click to collapse
only thanks ? i hit the google +1 too hahaha :good:

kessaras said:
only thanks ? i hit the google +1 too hahaha :good:
Click to expand...
Click to collapse
Thought about next rom or sticking to that one?

nmbbf said:
Thought about next rom or sticking to that one?
Click to expand...
Click to collapse
i thought about that but i didnt want to mention it here cause its wrong section. i wanna know more 1st. maybe ill watch at youtube if there is any video of other roms. after this i ve been through today , i feel like i handle almost anything hahaha

kessaras said:
i thought about that but i didnt want to mention it here cause its wrong section. i wanna know more 1st. maybe ill watch at youtube if there is any video of other roms. after this i ve been through today , i feel like i handle almost anything hahaha
Click to expand...
Click to collapse
Feel free to ask anything ahah

the phone cant read the sim card. the sim tool app which was preinstalled is missing ? i dont understand again

kessaras said:
the phone cant read the sim card. the sim tool app which was preinstalled is missing ? i dont understand again
Click to expand...
Click to collapse
I didn't understand... Which country was the rom you flashed? Tell me some more info

nmbbf said:
I didn't understand... Which country was the rom you flashed? Tell me some more info
Click to expand...
Click to collapse
i choosed and download the one for my country. the latest for greece

kessaras said:
i choosed and download the one for my country. the latest for greece
Click to expand...
Click to collapse
And it can't read your sim card ? what error does it get?

nmbbf said:
I didn't understand... Which country was the rom you flashed? Tell me some more info
Click to expand...
Click to collapse
greece 20a

nmbbf said:
And it can't read your sim card ? what error does it get?
Click to expand...
Click to collapse
non. no error. it just doesnt see any sim card
can we please use some other way to talk ? arent here any private messages ? something ? after its fixed i can just write here the solution and say thanks... i wait 5 minutes for every reply and the problem here is tough. if it goes on it will take hours....

kessaras said:
non. no error. it just doesnt see any sim card
can we please use some other way to talk ? arent here any private messages ? something ? after its fixed i can just write here the solution and say thanks... i wait 5 minutes for every reply and the problem here is tough. if it goes on it will take hours....
Click to expand...
Click to collapse
Sure add me on skype "nmbdbf".
I'm gonna leave for a while because I'm gonna have a soccer game now , but later on I can help, if nobody else helps with the solution