Another sdcard thread....cm 4.2.5 apps2sd/swap is locking me up - G1 Q&A, Help & Troubleshooting

Hello.. as the title states im having issues.
ok, so i recently rooted my g1when i saw Gnav was live (w00t) and all was well until i decided to partition my pqi class6 4gb partitioned as listed below.
ok heres the kicker.. every thing is fine until i start installing apps then it will just lock up then when i try to restart i get a black screen after the cm loading screen and thats it.. only way to get it back to life is to delete then repartition the card...... i reflashed, repartitioned and factory reset about 10 times and finally gave up and wiped card back to full fat32 and no swap or ext3 then reflashed cm 4.2.5 and have been running flawless for a week now so i have narrowed it down to my sdcard... any ideas on WTF could be going on here?? are pqi cards no good maybe?? it was real cheap i caught a deal on it about a year ago.. something like 2x4gb for 15 bucks shipped. I have never had any file loss when using it just for storage or anything.
heres how i had the partitions layed out
0 3459
3459 3971
3971 4003
i also tried ext4 aaaand out of desperation cm 4.2.4 with no luck
any insight greatly appreciated, I didnt know if i should post this here,in development or accessories but its a Q and im lookin for a A
Thanx
-Bop

Well I had the same issue with my phone, but I switched over to Amon-RA recovery and it does SdCard partition for you, You just have to enter the number's you want and it does the rest in recovery mode. This is how to flash it on this page. http://forum.xda-developers.com/showthread.php?t=566669.

errrm i dont think the recovery is the issue, i really like cm 1.4 for the fact that it has a console
thanx.
Next

Amon_RA has a console too....
if you dont want to use that, then format it through parted with 1.4
Amon_RA's does the same thing but its much easier (he basically added automated scripts to the 1.4 recovery, since it is actually based off 1.4)

Thanx.....but that's not my issue, please thouroghly read my opening post.
Thanx again
Also I should probably add one note here....it don't lock up as soon as I install a app.... I can get 3 to 5 apps in be4 what's explained in my OP happens.

BopChie said:
Thanx.....but that's not my issue, please thouroghly read my opening post.
Thanx again
Also I should probably add one note here....it don't lock up as soon as I install a app.... I can get 3 to 5 apps in be4 what's explained in my OP happens.
Click to expand...
Click to collapse
Well get us a logcat of when that crash happens. It seems like bad partitioning but get us a logcat and we can narrow down the issue

B-man007 said:
Well get us a logcat of when that crash happens. It seems like bad partitioning but get us a logcat and we can narrow down the issue
Click to expand...
Click to collapse
ok, i dont know how to do so and is this something i can fetch after the os is crashed via recovery console and dump to sd??
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
also.. take a look below, am i not doing something right here???
i did all the partitioning in parted as below
after removing all partitions i have a 4003MB chunk
mkpartfs primary fat32 0 3459
mkpartfs primary ext2 3459 3971
mkpartfs primary linux-swap 3971 4003 <---maybe i should try 4000 and not goto the end of the sd??
then after i'm out of parted
upgrade_fs to get ext3
tahnx again

BopChie said:
ok, i dont know how to do so and is this something i can fetch after the os is crashed via recovery console and dump to sd??
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
also.. take a look below, am i not doing something right here???
i did all the partitioning in parted as below
after removing all partitions i have a 4003MB chunk
mkpartfs primary fat32 0 3459
mkpartfs primary ext2 3459 3971
mkpartfs primary linux-swap 3971 4003 <---maybe i should try 4000 and not goto the end of the sd??
then after i'm out of parted
upgrade_fs to get ext3
tahnx again
Click to expand...
Click to collapse
that seems right..
if you have ADB setup, type in
adb logcat
just before installing apps. When it crashes, it should give error messages which we will be able to help you with. Post it here in code tags or post it on pastebin.com

BopChie said:
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
Click to expand...
Click to collapse
..........
B-man007 said:
that seems right..
if you have ADB setup, type in
adb logcat
just before installing apps. When it crashes, it should give error messages which we will be able to help you with. Post it here in code tags or post it on pastebin.com
Click to expand...
Click to collapse
currently i dont but i can get it setup again and give a try.. see my nandroid Q please

BopChie said:
..........
currently i dont but i can get it setup again and give a try.. see my nandroid Q please
Click to expand...
Click to collapse
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup

B-man007 said:
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
Click to expand...
Click to collapse
ok think i got it solved here... using logcat on a boot after partitioning the card i could see it was hitting a infinite loop and had todo with some prop's i had swapped out for Gnav.. but since that is official on 1.6+ now i was able to reflash cm and sofar so good, installed 10 apps with apps2sd live and notta prob
Thanx a ton

B-man007 said:
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
Click to expand...
Click to collapse
ok think i got it solved here... using logcat on a boot after partitioning the card i could see it was hitting a infinite loop and had todo with some prop's i had swapped out for Gnav.. but since that is official on 1.6+ now i was able to reflash cm and sofar so good, installed 10 apps with apps2sd live and notta prob
Thanx a ton

haha ok well its good to know you got it working

yeah so far so good.. 1last q...i have read mixed angles on enabling swap on sd.. i saw some1 say if its there cm4.2.5 will use it.. but i have saw ppl say it needs to be enabled.
I have never saw my mem get lower than 20MB should i even bother with swap?

its not enabled by default, you have to do it yourself. You shouldnt really need it on a cyan ROM.

Related

partition question

morning all
yesterday i spent most of my afternoon installing various roms and themes, and last night i was very brave and installed a recovery
im currently running CyanogenMod 3.9.10, now from what i understand this has auto apps2sd but will only work with a partitioned card. my card isnt partitioned.
so
am i right in thinking that 1.4 recovery can do this for me ?
does my card have to be empty / new format to do this ?
and can it be done at this stage of my phone ( theme, rom, radio installed )
many thanks guys
check out this thread it makes it very easy. if you do not have adb then just type in all the commands into the recovery console except in the beginning just hit enter in recovery console to start typing.
thanks for help
is there no easier way to do this ?
that looks complicated
with cm recovery, it's not hard at all. actually, i've done it several times in one day. haha honestly, it's a hell of a lot easier than how i had to partition my card in the first place. i spent hours trying to figure it out, and i praised cyanogen when that recovery image came out.
grandomegabosses said:
with cm recovery, it's not hard at all. actually, i've done it several times in one day. haha honestly, it's a hell of a lot easier than how i had to partition my card in the first place. i spent hours trying to figure it out, and i praised cyanogen when that recovery image came out.
Click to expand...
Click to collapse
dont suppose you could advise me on how i go about it could you please ?
you're going to want to backup the files already on your card
grandomegabosses said:
you're going to want to backup the files already on your card
Click to expand...
Click to collapse
i have done that
okay, i'm not sure if you need to format it, but you might want to, just for good measure.
boot into recovery and go to console. hit enter and type in parted /dev/block/mmcblk0 then hit enter again.
you'll get a whole buncha text telling you your in GNU parted. type in:
p then enter (just to make sure you can see your partitions and stuff)
you should only have 1 partition and it should be a fat32. enter
rm 1
that'll delete the partition. then enter
(these are the commands i put for my 2gb card. change the partition sizes to fit your card. 512mb is a good ext partition. if you're gonna do swap, 32mb is a safe starting)
mkpartfs primary fat32 0 1501
mkpartfs primary ext2 1501 1981
mkpartfs primary linux-swap 1981 2013
then enter p again to make sure you've got everything squared away. enter quit and it'll tell you that you might need to upgrade your filesystems.
enter upgrade_fs and wait until it gives you a # and reboot.
what size card are you using, anyway?
grandomegabosses said:
what size card are you using, anyway?
Click to expand...
Click to collapse
wow
thanks for that hope it works
its 8gig card
when you hit p in GNU parted, make sure you change the partition sizes for your 8gb card. i know... my card is puny! haha
also, do you have adb?
grandomegabosses said:
when you hit p in GNU parted, make sure you change the partition sizes for your 8gb card. i know... my card is puny! haha
also, do you have adb?
Click to expand...
Click to collapse
no i dont have adb ? whats that do ?
i just wondered. it does WAYYYY to much for me to explain right here. haha i just find it easier to type out the commands in the adb shell. but i'm not going to explain how to get adb going... it took me long enough to get it myself... haha
well thanks for the help, im gonna have a crack at this now
see you the other side
good luck
ok done that
when i says i may need to update... update what ? exactly
update your ext partition. that's what the upgrade_fs part was about. sorry
please excuse my sheer lack of knowledge...but how do i do that..i think im lost here
just type in upgrade_fs and hit enter and it'll do it automatically. wait for the # come up after that and type reboot then enter and it'll reboot
grandomegabosses i could kiss you put i wont !
your a star ! many many thanks for helping me out

Removed SD Card

Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
te5ter said:
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
Click to expand...
Click to collapse
sounds like a corrupted partition try repair ext file systems if that dosent work youve got to format partition and reinstall all apps.
btw does youre fat32 partition work?
te5ter said:
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
Click to expand...
Click to collapse
If it only happened once it shouldn't be an issue, but if it does it wouldn't hurt to format your ext.
In recovery
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -r /system/sd/*
I tried repairing my ext, no luck.
Whenever i try to mount in recovery console i get error : No such file or directory
te5ter said:
I tried repairing my ext, no luck.
Whenever i try to mount in recovery console i get error : No such file or directory
Click to expand...
Click to collapse
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
I cant recall which tutorial i fallowed, but it was all done through the terminal or recovery. Could you possibly point me to the right thread?
AdrianK said:
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
Click to expand...
Click to collapse
if you can remember the start and end of youre ext partition i think you can do this in parted by typing print then note down the start and end then type mkpartfs primary ext2 start - end
te5ter said:
I cant recall which tutorial i fallowed, but it was all done through the terminal or recovery. Could you possibly point me to the right thread?
Click to expand...
Click to collapse
Here you go, follow the second section.
http://android-simplicity.blogspot.com/2009/08/how-to-6-how-to-partition-your-sdcard.html
Everytime i try to mount in recovery i get "mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: device or resource busy"
I'm lost.
pull your battery our for 30 seconds or so. remove your sd card then reinsert it and then try again. if that doesnt work then do what the others guys have said and try to reformat your sd card and start from scratch.
AdrianK said:
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
Click to expand...
Click to collapse
Actually, with Parted you can just rm and mkpartfs any partition you want without affecting the other partitions.
I bit the bullet and just formated all the partitions.
Thanks anyways guys.
My advice for next time or any body else reading would be to download a live CD for ubuntu or fedora or similar and boot your PC off that - it's graphical and v. easy.
Or just dump windows altogether and go for linux ;-)
Smiffy.
Lordsmiff said:
My advice for next time or any body else reading would be to download a live CD for ubuntu or fedora or similar and boot your PC off that - it's graphical and v. easy.
Or just dump windows altogether and go for linux ;-)
Smiffy.
Click to expand...
Click to collapse
Yeah Gparted is amazing problem is then you have to walk the person through downloading, burning the image...which can be painful.
This is still happening, fresh format on sd card partitios and a wipe and clean install of Jacxrom.
Bad sd card? Or the phone?
JACxROM [v1.3]
I am attempting to flash to this ROM. Everything seems to go as describen in other posts, but when I power up the phone, I never make it past the splash screen. Any thoughts??
sorry
Sorry I posted this in the wrong place, I will move it.
rberger13 said:
I am attempting to flash to this ROM. Everything seems to go as describen in other posts, but when I power up the phone, I never make it past the splash screen. Any thoughts??
Click to expand...
Click to collapse
Bump, dead SD card?
partition corrupted anyway to recover?
I need help please!
I was running cyanogen 4.0.3.1 just installed today morning then changed theme to enoch 1.12 the newest one that worked fine. Updated the browser to loccys Then installed the HTC music and when finally rebooted the phone it was working fine until I noticed I had none of my apps on the sdcard.
All I have is syste/app folder which runs internally I think everything else does not work. It's like my sdcard is not in.
I shutdown rebooted and waited. Then removed sdcard rebooted and inserted the card one fully powered on and it is saying it wants to format it.
I get home turn my ubuntu system on and it detects it as a ext3 partition yet nothing inside. and now no fat32 partition or linux-swap.
anyways to recover or am I SOL?

New sd card, i need help.

I just bought a new SD card, 4 GB, class 4. And my old one was only 2 GB, not sure what class. And i'm not sure what steps i need to do to get everything i had on my old one and get everything to be the same as before without any problems.
My sd card is partitioned and has linux swap with ext 2 converted to ext 3.
Phone is rooted and running MLIGN-Hero 2.5.5 and i think my apps are on my sd card, but not 100% sure.
And also i'm using Amon Ra's Custom Recovery v1.2.2 and used that to partition my sd card.
Do a nandroid back-up. After you do that, on your PC, copy the nandroid folder from your SD to your desktop. Then, format and partition your new 4 gig SD. I would make the ext3 and linux-swap partition the same size as you had them on the 2 gig SD. Finally, copy the nandroid folder on your PC desktop to the 4 gig SD, put it in the phone, boot into recovery, and run a nandroid restore. Everything should be good.
Just incase you need it...
Code:
parted /dev/block/mmcblk0
mkpartfs primary fat32 0 xxxx
mkpartfs primary ext3 xxxx yyyy
mkpartfs primary linux-swap yyyy zzzz
quit
upgrade_fs
reboot (or) reboot recovery
thanks, i really appreciate it. i'll try it out now. i'll make another quick reply when i'm done to say if everything worked out fine.
BlackElvis79 said:
Do a nandroid back-up. After you do that, on your PC, copy the nandroid folder from your SD to your desktop. Then, format and partition your new 4 gig SD. I would make the ext3 and linux-swap partition the same size as you had them on the 2 gig SD. Finally, copy the nandroid folder on your PC desktop to the 4 gig SD, put it in the phone, boot into recovery, and run a nandroid restore. Everything should be good.
Just incase you need it...
Code:
parted /dev/block/mmcblk0
mkpartfs primary fat32 0 xxxx
mkpartfs primary ext3 xxxx yyyy
mkpartfs primary linux-swap yyyy zzzz
quit
upgrade_fs
reboot (or) reboot recovery
Click to expand...
Click to collapse
ok this is weird, when i go to to the nandroid backup it says "Error : Backup not performed!"
EDIT: nvm i fixed it. i just had to reboot.
EDIT: nvm again, it worked for a little while then the same error message showed up again.
didnt work, i got stuck in a boot loop at the hero loading screen, im just gonna use my old one for now then ill have to go back to the store and trade in the 4 gb sdcard for a new one and try again.
wtf?!?! now none of my apps work! as soon as i open it and then try to click on something inside the app i get a force close (the one where it doesnt have the option to "wait")
nvm i just did a nandroid restore from my old sdcard.
sumtime nandroid can't finish if there is not enough room left on the card
maek_it_happen said:
sumtime nandroid can't finish if there is not enough room left on the card
Click to expand...
Click to collapse
hmm... makes sense. i'll try and remove some stuff from my old sd card then backup again.
I don't believe nandroid backs up your SD also. Just internal flash. So you'll need to find another way, I believe you can do this through adb
Basket Lotioner said:
I don't believe nandroid backs up your SD also. Just internal flash. So you'll need to find another way, I believe you can do this through adb
Click to expand...
Click to collapse
sorry for being a noob here but what is adb again? i completely forgot.
Here
Basket Lotioner said:
Here
Click to expand...
Click to collapse
thanks but umm... i think i'll just stick to my 2 GB sdcard, lol. way too confusing stuff and way too much to read and understand. i'm a major noob when it comes to android and i know i would screw alot of stuff up with that, i always do. thanks for the help anyways though.
AnThNeE said:
thanks but umm... i think i'll just stick to my 2 GB sdcard, lol. way too confusing stuff and way too much to read and understand. i'm a major noob when it comes to android and i know i would screw alot of stuff up with that, i always do. thanks for the help anyways though.
Click to expand...
Click to collapse
u could jus use nandroid and back up for root users , format and partition ur new card using amon then just restore the nandroid and back up !
maek_it_happen said:
u could jus use nandroid and back up for root users , format and partition ur new card using amon then just restore the nandroid and back up !
Click to expand...
Click to collapse
well, i wish it was that easy. i think my new sdcard is broken anyways, when i did it the first time, i got stuck in a boot loop. then i went back to recovery, got rid of my ext 3 i think or something like that, and then i put it in my computer and formatted it, and then did it all over again, and then this time my apps didnt work, actually, wait i think i know what you mean... hmmm.... brb i'm gonna try what you basically said. sorry for all the typing, i have a habit of over typing things, lol.
well, ran in to a major problem. now everytime i try to do anything i get an error saying to run _________ (<--whatever it says) via console. so is my sdcard broken? cause i really dont feel like going out and buying a anew one.
maek_it_happen said:
sumtime nandroid can't finish if there is not enough room left on the card
Click to expand...
Click to collapse
how much room does nandroid need?

apps2sd question

i searched for this and came up with some links, but none to verify my exact question which is, do i need a certain ROM, or recovery image, i have the RA-dream-V1.5.2. to apply apps2sd, i am currently running the latest cyanogen ROM, do i need a sd card reader or can it be done just by using terminal emulator, and i just bought a 4gb class 6 from new egg, and i was wondering what do you guys recommend for my ext2 partition space to be? so if you guys have any info on this it would be great if you threw it my way thank you!
Most rom have it enabled automaticlly when it sees an extX partition. The recovery is not required, but helpful if you don't have a linux system or other software to create the partitions on your computer. No card reader is required unless you want to format it that way. The only terminal commands you would need would be in the recovery console for you. The space is up to you and your needs and does not increase or decrease performance either way.
See the link below and it will help you doing it the manual way and with Amon_RA's recovery.
http://wiki.cyanogenmod.com/index.php/Apps2SD
thank you, you were a bunch of help, i shall try this when i get home tonight
No problem, let me know how it goes.
it asked me for swap-size and also ext2-size, im not to sure what numbers i need hmm?
If you plan on using a hero rom put in something for swap, if not put zero. The put in the amount of ext you want for apps. (normally between 256-512)
To upgrade the file system from ext2 -> ext3 use the command upgrade_fs in the recovery console.
Look at the link I gave you and scroll down to the Amon_RA section if you need more help.
it said upgrade_fs not found (nvm)
i got ext2 to ext3 thank you for all your help sorry for being a pain dude...
so to make sure i did it right, how much available phone space should i have?
It varies based on the cache you have for the apps, but I have 68mb but I have been running the same rom for a while. It should be around 80mb if you haven't done anything to build the cache, but I have the 1.33.2005 SPL which increases the internal memory size.
I get the same error "upgrade_fs not found" when I want to upgrade to ext 3 from console. From Amon_Ra's recovery I get an error too when I want to upgrade to ext 3. The other SD card I have worked perfectly with exact the same steps. What is wrong? Thanks
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
sakumaxp said:
i guess thats the same?
Click to expand...
Click to collapse
As the upgrade_fs script, yes.
evilkorn said:
As the upgrade_fs script, yes.
Click to expand...
Click to collapse
yeah thats what i did because it did the not found error, so i was like meh, sounds like the same haha
sakumaxp said:
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
Click to expand...
Click to collapse
I get an error when I press "upgrade ext2 to ext3" on my 2 GB card, the 1 GB card is done already.
sorry dude im a noob at this thing myself i guess one of the senior guys gotta answer this for you =\
Very strange, after many attempts suddenly I made the partitions, I don't know why but it worked
well thats good to hear =]

Major RA-dream Problem

Is it normal to NOT be able to wipe the Dalvik-cache and ext partition??
It always gives me an error saying it doesnt exist? I am able to install ROMs and themes however. Any ideas or recommendations on what to do?
Running: RA-dream-v1.2.3.
Do you have partations on your SD?
ilostchild said:
Do you have partations on your SD?
Click to expand...
Click to collapse
Do you mean the below?
Partition Fat32/Ext2 with App2SD
Open up Apps2SD
It will show you a screen telling you that your card is not partition and you will have a sliding bar to choose the amount of space you want for an EXT2 partition
I suggest a max of 600mb for EXT2 space (I use 500mb)
Press Ok
You will get a Force Close screen DONT PRESS FORCE CLOSE PRESS WAIT
You will get a reboot message, Press Reboot
You now have a EXT2 partition
------------------------------------------------------------------------------------------------------------------
Upgrading your EXT2 Partition to EXT3
Note: You do need the Cyanogen Recovery image for this to work!
Reboot into Recovery (Home + Power)
Go to console (Alt+x)
Press Enter
Type the following in the Console:
Code:
upgrade_fs
Wait for it to finish
Congrats! You now have a Fat32/EXT3 partitioned Sd Card!
Source: http://forum.xda-developers.com/showthread.php?t=535232
If you get a error about run via console or something you should remove sd blow the slot then place the card back in. Your sd might be the prob though so see if anything changes.
I see i noticed you have a older Ra which has bugs you should upgrade to theh newer version that have those things fixed.
@ Ace42
Quote: If you get a error about run via console or something you should remove sd blow the slot then place the card back in. Your sd might be the prob though so see if anything changes.
Yes it does say run via console, blew the slot several times and same thing, even blew on the SD card and nothing :-(
Perhaps it is time to change out this SD for a newer one, could be its going out on me?
Quote: I see i noticed you have a older Ra which has bugs you should upgrade to theh newer version that have those things fixed.
Upgrading to the latest and greatest RA is my next step, hoping this will fix my issue... thanks for all your suggestions so far.
@ilostchild: thanks for your input as well.
Okay so I installed the lastest RA Dream and am still getting the same error.
I am going to test out a new microSD and see what happens. I just have to make a temporary folder on my desktop copy, format the new SD to fat32 and copy the original files and folders I had back into the new one right?
Also, will me not having partitions be the whole reason behind it? Even the Dalvik-cache?
legend221 said:
Also, will me not having partitions be the whole reason behind it? Even the Dalvik-cache?
Click to expand...
Click to collapse
yes................ that would be a reason why you can't wipe your ext partition. you need to have an ext partition to wipe it.
grandomegabosses said:
yes................ that would be a reason why you can't wipe your ext partition. you need to have an ext partition to wipe it.
Click to expand...
Click to collapse
That makes perfect sense, thank you.
What about the Dalvik-cache?
legend221 said:
Is it normal to NOT be able to wipe the Dalvik-cache and ext partition??
It always gives me an error saying it doesnt exist? I am able to install ROMs and themes however. Any ideas or recommendations on what to do?
Running: RA-dream-v1.2.3.
Click to expand...
Click to collapse
ive got a solution update to 1.5.2
VoLoDaR1 said:
ive got a solution update to 1.5.2
Click to expand...
Click to collapse
Im good to go, got that installed since today 04:55 AM.
I think I found my solution the Sandisk 1GB was holding me back. Now I can even install the ROM Super D unlike before.
Many thanks to everyone for their contribution.

Categories

Resources