Related
Hi,
Is it possible to upgrade my Qtek 9100 without using an USB cable but a SD card. The reason is that my mini USB connection on the Qtek is broken. So I can't connect the Qtek with my computer.
If it is possible to upgrade with a SD card can anybody tell me how.
I havn't heard of doing it this way in a while. My old T-Mobile Pocket PC Phone Edition. "Space Needle" used to be flashed this way. You would load the Rom onto the SD card and use some type of key combination at boot to load the rom... I'm not sure that it exists with this rom and hardware...
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
Is it possible to make a rom image on a SDcard out of the the ROM's availiable om this forum? And how can this be done.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
would you please tell breifly how can we have rom image on sdcard ????
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
yes i have cid unlocked imate kjam
clemsyn said:
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
Click to expand...
Click to collapse
I have CID unlocked my phone so that's no problem. But how do I upgrade with a SDcard and how to make an image on a SD card.
Who can help.
put your phone in bootloader mode (make sure you have minisd in the slot)...disable activesync on your computer by stopping wcecomm process...then plug in the phone (while it's in bootloader)..then run romupdate_115.exe (look for it in the xda ftp). Then choose the usb connection (I think it's wcusb or something)..press enter..cmd> should appear...then type r2sd all (this will backup everything in the phone to the minisdwhen it completes).
Then when you put it in the phone you want to upgrade..put that minisd in the phone you want to upgrade and put that phone in bootloader. It will ask you if you want to update and press the voice command button to upgrade. Goodluck!
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
Not as far as I know my friend ..... sorry
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
If needed, PM Me and you can send me a MiniSD card to load a rom onto for you. and I'll ship it back. Let me know which rom you want loaded, and I will do it for you.
Actually somebody with an CID unlocked wizard can create an SD image and then upload it to the website for you to upload and use but it will definitely wipe out the data on their SD.
I'm in the same boat. My miniUSB port fell in. I need to get the t-mobile ROM back onto the phone so I have a chance of repair. If anyone could upload a ROM onto the forum that will let me update using a miniSD card I’d be very grateful.
At least I’m not the only one who's USB port has broke!
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
Assuming /dev/sda is the device pointing to your SD card reader, and /tmp/sd.img is the sd card image file, in Linux you can extract it with this command:
Code:
dd if=/dev/sda of=/tmp/sd.img
And you can write it back on another SD card with this command:
Code:
dd if=/tmp/sd.img of=/dev/sda
in Windows you can use psdread.exe and psdwrite.exe, see the wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdread.exe
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdwrite.exe
If anyone makes an Original SD ROM of tmobile...Please upload it at ftp. It would help lots of people here in the forum..
Upload of stock TMobile Rom to SD card
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
peraltah said:
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
Click to expand...
Click to collapse
My file isn't from teh FTP, its from my phone. I made a b/u before I installed X's rom on day 3 of my MDA ownership. Like I said, I think there's a way to pull the image off the card, but I'm not going to spend my time looking. If some one wants to find me instructions as well as links to programs needed, I'd be glad to post the image.
Restoring Tmobile USA Rom from SD card
Thats for all the info folks it worked perfectly and I will not have to cough up any money for me voiding the warrenty!!
Need a favours over here. Recently, i bricked my trinity. P3600 more precisely Dopod D810 (i flashed wrong ROM -> Unpacking cooked rom for trinity but i merge it with -Hermes cmd in NBMerge! houh... so stupid! ). Soo... just not what i expected, Rom flashing stop on half, SR my trin and tada.... 3Color screen bootloader popup! haaarggg, i try flashing another rom using any rom that has same CID *official or cooked rom* (some are 100% thru, but someother not) but like usual it won't start the windows (just blank/black screen with green led[ always on!) Never been like this before! Have been flashing several times using any cooked rom by great chef on trinity but this time! :doh: damn it! my bad.
i found solution on the forum *Unbricking Trinity Stuck on Bootloader* but since my usb port can't be detected on my vista/xp machine, whether i disable AS and changed my usb cable it doesnt work at all, on mtty too! so i can't use that utility. i try run install sspl olipro 1.3 but it never changed my spl at all. now i can't use my trin at all cuz allready dead.
btw this is the info on trin 3color screen bootloader:
IPL 1.00
SPL 3.20 OLIPRO
anysolution for bringing back my trinity from the death? maybe a tools/utility to unbrick trinity from SD or something like that, which not involved any pc connection, without bring this devices to htc center of course.
I hope any expertise on this forum would helped me sort out this probs.
Sorry for my english and thanks for reading my post.
Read this :http://forum.xda-developers.com/showthread.php?t=308691 download splxploit-windows.zip (935.1 KB, 7619 views) put phone in bootloader run splxploit when bootloader change
After this download full rom here is link:http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
Then flash full rom bat do not disconnect usb cable in any step.
Before use any step disable active sync.
Usb are dead
Gsmhacks thanks for ure reply. I have tried that one, and lot read ing on wiki. But since i cant use the usb i cant use that splexploit whether on live linuxcd, or .Net version even win version. The usb port cant be opened . I think i broke the usb pin. From the beginning everytime i flashed my trin i never used ruu utility, i always do the sd card method and that is the best and easiest method and it works for me.
I just curious perhaps can anyone or is there any utility to unbrick trin via sd card. I knew a lot a people has bring their trinity life from dead by using htc stackflow splexploit. I hope that was work for me too! Too bad my usb are dead. Damn!
Here what you need bat only work if you have hard spl
If you install hard spl before brick trinity you can use SD CARD to flash trinity. YOu need to formate sd card to FAT32 with Card Reader donwload full rom here is link: http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
then extract and file RUU_Signed.nbh rename to TRINIMG.nbh and copy it to the root folder of your miniSD card.
Here is full instruction again also first format sd card to FAT32 !!!! VERY IMORTANT to format sd card to FAT32 or all other step will not work THEN:
1. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract (or you can also use winrar via wine).
2. Rename the .NBH file to TRINIMG.nbh and copy it to the root folder of your miniSD card.
3. With miniSD card inserted on the phone, start the bootloader (hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom).
4. You should see the screen pictured on the left, confirm flashing on screen by pressing the power button.
5. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
6. When flashing completes soft-reset your device.
and you will flash and unbrick trinity bat this only work if you install before this hard spl i mean cid unlock trinity. if not you must fix usb port.
That will work? I hope so
Ok then i'll try flashing using that rom. Oo, i have install hardspl btw and so far flashing using sdcard method no probs. But after i bricked my trin flashing doesnt smooth like be4. Always gave me error 0018003 update fail on the halfway, i guess because i have bad nand on trin and probably cuz cooked rom.
Can u give me another link, perhaps on xda ftp. rapids so slow 4 me. Btw i have download dopodasiawwe official rom on xda ftp *twice but still when i tried to run the package it gave me corrupt archive integrity fail w!f.
Thanks gsmhackerns, i downloading the package now!
Perhaps you can find a way to make a goldcard for Trinity?
See http://forum.xda-developers.com/showthread.php?t=437996
That's what i looking for! Thanks.
Humm, superb. Yay, great! Thank you stepw. Even its for elf with a little mod i hope this will work. Once again thank you.
Stepw, i have tried making the gold card, everything went ok. I have temp. cid *supercid* but the probs now is i can't download http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.execan someone uploaded to somewhere else. Rapidshare crap! perhaps on xda ftp.
thanks!
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
cmonex said:
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
Click to expand...
Click to collapse
Indeed. Youre right cmonex, it doesnt make any difference at all 4 my trin. After several tried using and making goldcard 4 trin, finally i made working goldcard4trin, but gosh it still stuck when i tried to update the os (update os fail) humm anyone.
Sorry for wasting your time with Goldcard, I have overlooked that you have a hard spl on your Trinity. In this case goldcard doesn't make a lot of difference.
And there's no trindiag.nb to the best of my knowledge that could be used instead of SSPL cmonex is suggesting to run from SD.
Back to the topic, sounds like you have some "bad" blocks in flash and OS can't be flashed. Bad blocks can be reset with "task 2a" command, see this thread for more details:
http://forum.xda-developers.com/showthread.php?t=330496
The question is how to run it without USB and I don't have an answer for you
Some people have previously mentioned they managed to flash smaller OS images when larger images failed, perhaps if you try flashing some minimal vanilla ROM, it will succeed?
Bad NAND, Yup!
Ya... as i mention before yup i do have bad nand block on my devices. Using manila rom with smaller img size the flash went 'OK'. But it doesn't boot at all infact just black screen with green led on.
Okay the only solution probably use mtty and do task 2a if i'm not mistaken. But like you said "The problem is the USB port". I think the port is ok cuz i already tested it connecting my usb to my trin without inserting the battery and the red led *magenta* is on. humm, weird!
But if something can make it working without involving any pc connection it would be a great achievement. hahah! well i supposed i have to put my trin on bunker before someone can make it happens
I asked SEA in my country and they recommend me to changed the machine it self and they charge me around US $160 ho...ho.. too "wideeeeee" for college boy like me
Same problem, i flashed the rom
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
and after that i tried to flash a new radio!
power+cam and the cell phone did not show usb, then i used sspl to rum the radio but it locked at 0%
after that it is stucked at bootloader screen
ipl 1.0
spl 3.20 .....
but no usb and no sd card !!
did i lost the cell phone?
there is no jtag ou something like that ?
so now... you still want this SSPL? i'm thinking of patching one up to automatically run task 2a maybe. or just restore stock spl for warranty service if that's what you have in mind. but you didn't really reply to that offer?
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Needed!
Cmonex, sorry for longtime haven't seeing this thread again. okay i really need your help btw if you willing to help me. The spl your talking about perhaps can sort out the probs (i hope) at least we tried. as for task2a cmd to clear the bad nand block is none usefull for me since usb conn. are definitely drop dead.
how about patch the SSPL to do task2a cmd to solve the bad NAND block first.
dinizbruno said:
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Click to expand...
Click to collapse
no usb, no sd, no chance sorry. jtag it or get it serviced or get another phone.
as for jtag, hermes jtag has been worked out by scholbert. trinity is probably the same, but you will have to find the pins. the rest of the process will be the same.
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
The O.S is more important to these operations than can be stressed - for a 99% safe flash Win XP is your best bet , I have had nothing but error 260,270 halfway flashed roms and usb faults running on vista and since I had my original bricking episode - NOTHING , I repeat NOTHING including genuine roms has flashed without a recovery or at least without doing something strange in the process - SPLXPLOIT has been a saviour here , without it I would've been lost.
Cant the O.P simply use another machine to test out the USB theory ?
ALIVE AGAINnnnnnnnnnnnn!!!!!!!!
My p3600 was stucked att bootloader, and wont give "usb" and do not read TINIMG.NBH (tried on elf with ELFIMG.nbh and the card was great)!
I did a golcard with the post on elf about it and the cell with the gold card inside was the same, no trinimg.nbh and no usb.............
BUT..............
with the goldcard inside, turned OFF, i placed it on the usb cable off the pc and the device booted to the bootloader screen, but this time he got "USB" , before flashing anything i removed the card , and putted switched off in the usb, booted with "serial" with card and pressing power and then placing usb still "serial" message!
I putted the card, did not switched on , placed on the usb and waited for it to boot for it self , and for my surprise "usb".
Flashed stock rom, and it booted nice!!!
Please try!
saved my day!
sidekraouf95 said:
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
Click to expand...
Click to collapse
I have to know how to repair my phone please... nobody can explain precisely how to put my phone on bootloader using my sd card directly from my computer under vista...???
I need to take my Touch HD back to the shop for repairs under warranty because touch screen is not working.
And i currently have Dutty's ROM installed. Problem is that the mobile cannot connect to Active Sync because it is currently in the very first Win Mobile load-up screen and since the display does not work, I cannot install original ROM via USB - I NEED a ROM for install via SD card.
The original HTC touch HD ROMs on xda developers that I have seen are only for install via USB.
Can someone please please point me in the right direction to a English Touch HD Original HTC ROM please that i can install via the SD card? I would very very very much appreciate it!
You don't actually need to be able to connect the phone to Activesync in order to flash the stock rom.
Download whatever Stock Rom you want, boot your phone to the tri-colour screen (So holding down the Vol Down key while pressing power), plug in your USB cable, wait a few seconds and then start the Rom package that you downloaded onto your PC.
Edit - I'm assuming you have used HardSPL on your device. Don't forget that after flashing the stock Rom and Radio to flash your stock SPL back aswell.
It worked! Thanks a lot mate!
But 1 qs. Why do i need to install the Stock SPL? Is it also really important for the warranty?
ronald
ronald_adi said:
It worked! Thanks a lot mate!
But 1 qs. Why do i need to install the Stock SPL? Is it also really important for the warranty?
ronald
Click to expand...
Click to collapse
I would say that yes, it is important.
I've read about warranty claims being refused because HardSPL was on the phone.
ronald_adi said:
I need to take my Touch HD back to the shop for repairs under warranty because touch screen is not working.
And i currently have Dutty's ROM installed. Problem is that the mobile cannot connect to Active Sync because it is currently in the very first Win Mobile load-up screen and since the display does not work, I cannot install original ROM via USB - I NEED a ROM for install via SD card.
The original HTC touch HD ROMs on xda developers that I have seen are only for install via USB.
Can someone please please point me in the right direction to a English Touch HD Original HTC ROM please that i can install via the SD card? I would very very very much appreciate it!
Click to expand...
Click to collapse
Heiii is very easy!!!!
Take the original rom (i think you see xxxxxx.exe) open with one program type winrar or winzip and extract the file largest,rename in BLACIMG.nbh and copy up your microsd
Now you flash with microsd....
This is only for the rom!! Bye
Flashing via SD card failes! Need help! THX
Hi,
I wonder what is wrong with my Touch HD:
I have Olinex 1.14. HSPL and Duttytroy 1.7 installed.
What do I have to do, when I want to flash a new ROM or RADIO by using the SD card. It always says: "No ROM found" or so when I boot in bootloeder modus an then press power buttom.
What things must be done in order to succeed with flashing by SD card??
SD card ist formated as FAT32 and is the original 8GB one that came with my TouchHD.
be sure its not one of those memorycard which just dont work for flashing
iirc they are the transcend ones
you also should format it and leave it completely empty with only the blacimg.nbh file
anyway the suggestions given to update with usb putting the machine in bootloader mode should work as well so that you wont be buggered by the crappy sd
Moony, thanks a lot for your help. HTC will be picking up my phone tomorrow and I have not yet flashed the softSPL because i cannot find it. i have looked for it at the Blackstone Wiki site here with no luck.
If u get this message on time, could u (or someone else) point me in the right direction on where to find the original SPL?
http://forum.xda-developers.com/showthread.php?t=431217
You can find various original SPLs attached to the bottom of the first post.
I know the Telstra Australia Touch HDs used 1.15, and I think the normal European ones used 1.13 or 1.14.
my htc hd7s bootloader screen shows just one line
PD29150 SS-BC(4k)
i got this when something went wrong while RSPL HSPL...
i am not able to install any rom on this..
pls help..
iam attaching snap of screen ..
That's what happens when the phone gets bricked, the bootloader gets damaged and you only get one line, the devices MID information. Did you downgrade your spl first to 3.xxx or below before trying to install rspl/hspl? Can you get into USB host mode? Press camera+volume down+power on, this will bring you into USB host mode. If you can get into USB host mode there is a chance you can repair the bootloader with the Goldcard method. Post back your results and we'll see what we can do to get it fixed for you!
thanks xdrc45
i will try this and get back to u.
aakash
xdrc5
i have tried custom roms many times. but this was sone when i install a stock rom on it and then again used espl hspl. after that i got that screen..
pls tell me how to use gold card method to repair bootloader..
i want ot install custom roms on my device.
thanks
aakashvijay said:
xdrc5
i have tried custom roms many times. but this was sone when i install a stock rom on it and then again used espl hspl. after that i got that screen..
pls tell me how to use gold card method to repair bootloader..
i want ot install custom roms on my device.
thanks
Click to expand...
Click to collapse
Its not really hard you just have to make a Y cable (otg) out of some USB cables and have a SD card reader/flash drive. Here's a detailed tutorial on how to make the Y cable, how to use it and the SD card reader!
http://forum.xda-developers.com/showthread.php?t=893152
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
aakashvijay said:
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
Click to expand...
Click to collapse
Hello!
try this:http://forum.xda-developers.com/showthread.php?t=1676794
aakashvijay said:
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
Click to expand...
Click to collapse
Yeah there you go...try Ruyzalim's goldcard tutorial, great pics, deatailed and easy to follow!! Also when your making the Y cable, don't make it too long in lenth or sometimes it won't work properly!
xdrc45 said:
Yeah there you go...try Ruyzalim's goldcard tutorial, great pics, deatailed and easy to follow!! Also when your making the Y cable, don't make it too long in lenth or sometimes it won't work properly!
Click to expand...
Click to collapse
what if i make an goldcard and replace microsd card in HD7 and then go to usb host mode...
pls suggest because nothing is going works for me..
RIFF box
aakashvijay said:
what if i make an goldcard and replace microsd card in HD7 and then go to usb host mode...
pls suggest because nothing is going works for me..
Click to expand...
Click to collapse
Your only solution to fix the bootloader(SPL), but you must pay to someone who repair phones...
I don't know how much will it cost you...
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Omar Sammak said:
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Click to expand...
Click to collapse
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
xdrc45 said:
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
Click to expand...
Click to collapse
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Omar Sammak said:
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Click to expand...
Click to collapse
Your welcome... You'll have your HD7 up and running a custom rom in no time!
xdrc45 said:
Your welcome... You'll have your HD7 up and running a custom rom in no time!
Click to expand...
Click to collapse
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Omar Sammak said:
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Click to expand...
Click to collapse
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
xdrc45 said:
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
Click to expand...
Click to collapse
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Omar Sammak said:
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Omar Sammak said:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Click to expand...
Click to collapse
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
xdrc45 said:
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
Click to expand...
Click to collapse
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Omar Sammak said:
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Click to expand...
Click to collapse
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
xdrc45 said:
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
Click to expand...
Click to collapse
i installed the two ... but i notested that Deepsharing 7 is not established dont know why .. digital power is not working well even when i restart my phone ant rooted the phone and usb video didnt work
so i returned to Nextgen v3 its lighter and stable