Database Develop

Did I kill my Wizard?

ionutzu said:
Hi there,
I installed a bunch of stuff on the AKU3.2 Rom H-tec innov / O2 ROM which i found on the ftp and now when i soft-reset the phone, it either gets stuck (in windows) on Today, where it only loads like half of it and is consequently stuck or it resets again...
How would I be able to solve this issue having that it doesn't connect to ActiveSync?
Thanks a bunch,
John
Click to expand...
Click to collapse
ionutzu said:
OK let me clarify.... phone is totally unresponsive. I turn it on, HTC Innovation screen pops then the O2 with all the version, it loads windows and you can't really do anything but turn it off... or hard reset which doesn't help because the next time it loads, it just does the same thing...
What can I do
Click to expand...
Click to collapse
Thought it might've been in the wrong section!

Try to put it in bootloader mode and reflash. Goodluck!

clemsyn said:
Try to put it in bootloader mode and reflash. Goodluck!
Click to expand...
Click to collapse
Thanks for your reply, could you direct me please to somewhere where i can read of how to put it in bootloader mode? I have no idea and I can't find it in the manual. Thanks
If you want, you can IM me on YIM: ionutz_ceo
Thanks a lot

I've achieved putting it into bootloader mode, how would I go about reflashing now?

lol, ok!
So basically this is the result of my 2 hour research::
If you're Wizard is frozen, you do this:
1. Turn off USB in ActiveSync
2. Download mtty
3. While phone is off, press Camera button then holding it press Power button on phone and it will load in bootloader mode
4. Connect mtty to the phone via usb
5. <<< Here is when my research parts ways
6a. You can use a sd card and put an image on it, using mtty reflash the phone (don't know how to do that or where to get the image)
6b. There's another way of reflashing the phone...
Can anyone fill me in on that?

ionutzu said:
lol, ok!
So basically this is the result of my 2 hour research::
If you're Wizard is frozen, you do this:
1. Turn off USB in ActiveSync
2. Download mtty
3. While phone is off, press Camera button then holding it press Power button on phone and it will load in bootloader mode
4. Connect mtty to the phone via usb
5. <<< Here is when my research parts ways
6a. You can use a sd card and put an image on it, using mtty reflash the phone (don't know how to do that or where to get the image)
6b. There's another way of reflashing the phone...
Can anyone fill me in on that?
Click to expand...
Click to collapse
That seems a bit more complicated than what is really needed.
Assuming that your device was a G3 before you started, you are CID unlocked and you didn't overwrite incompatible bootloaders on a G4 device by using a G3 only ROM:
Once you are in bootloader, connect your USB cable. You should see the letters USB in the lower corner of your device.
Reflash with an official AKU2 ROM (latest available from your carrier's website.)
to do this once you are in bootloader mode and see USB in the lower corner execute the rom installer.
Don't flash an AKU3 Rom until you read all the threads completely on them. Several programs that work with AKU2 do not work with AKU3 and will freeze your device - Which appears to be what you are experiencing. There is still work being done on AKU3 and they aren't for mainstream use yet. There are driver incompatibilities, database restructures and such that haven't been accounted for in some software. The most common issues are documented repeatedly in every AKU3 ROM thread.

Zzan said:
That seems a bit more complicated than what is really needed.
Assuming that your device was a G3 before you started, you are CID unlocked and you didn't overwrite incompatible bootloaders on a G4 device by using a G3 only ROM:
Once you are in bootloader, connect your USB cable. You should see the letters USB in the lower corner of your device.
Reflash with an official AKU2 ROM (latest available from your carrier's website.)
to do this once you are in bootloader mode and see USB in the lower corner execute the rom installer.
Don't flash an AKU3 Rom until you read all the threads completely on them. Several programs that work with AKU2 do not work with AKU3 and will freeze your device - Which appears to be what you are experiencing. There is still work being done on AKU3 and they aren't for mainstream use yet. There are driver incompatibilities, database restructures and such that haven't been accounted for in some software. The most common issues are documented repeatedly in every AKU3 ROM thread.
Click to expand...
Click to collapse
Yes I agree with this the other option is a bit more complicated. This is much easier

@ ionutzu
Please update how the solutions above worked for ya. Zzan's solution is standard and most used along with being the easiest & should definitely work.

^^ you guys are wonderful!
Pretty much this is how it works, I couldn't find the "easy" solution anywhere, but now I figured it out.
1. Turn on phone holding camera button + power button
2. Connect via USB
3. Make sure USB is written in bottom left corner of PPC screen
4. Run an original ROM update (that is, the ones coming straight from T-Mob, I've tried it with other roms, it doesn't work)
5. It should work, you should have a fresh copy
6. I guess put your customized rom and try again....
Thanks for the help.

ionutzu said:
^^ you guys are wonderful!
Pretty much this is how it works, I couldn't find the "easy" solution anywhere, but now I figured it out.
1. Turn on phone holding camera button + power button
2. Connect via USB
3. Make sure USB is written in bottom left corner of PPC screen
4. Run an original ROM update (that is, the ones coming straight from T-Mob, I've tried it with other roms, it doesn't work)
5. It should work, you should have a fresh copy
6. I guess put your customized rom and try again....
Thanks for the help.
Click to expand...
Click to collapse
Glad it worked out for you.

My htc starts up, but freeze during boot up

First of all i do not know where to post this. I have had a HTC wizard for over a year now. it has been working fine after cooking up wm6 and installing it for 6 months. today when i restartet the phone pulling the battery out and inserting it, the phone starts up, then the blue screen comes and shows ispl etc, then windows image shows, there it stops. i do not know what to do. It has been a while since i did pocket pc modding now, and i have forgotten all about it.
Alexander, [email protected]

Maybe something crashed the OS software.
Hope you have a system backup, or at least PIM backup using ActiveSync because what you need now is a hard reset.
Punching the reset hole (next to IR window) while holding CommManager+VoiceDial, then press "Dial" as prompted.

how do i hard reset my dash/s620?

i have tried hard reset
i have hard reset the phone. i do not have any backup in active sync. and i dont think that matters. because my phone does not connect to activesync since it does not start up. and in the three colored boot mode the phone is not detected by active sync. when i hard reset the phone it just came to the same point and freezed

If you didn't touch the ROM for long time, then it is probably a hardware failure...

lovemy318 said:
how do i hard reset my dash/s620?
Click to expand...
Click to collapse
READ YOUR PHONE MANUAL, and THIS IS NOT DASH FORUM.

hard to believe
First off, thanks for fast responses.
It cant be hardware(Not as a total theory of course) or likely not, because phone was not touched by water, shock, bumb fire or anything. it laid on my desk, worked, laid on my dask more, freezed. and it has been working for 6 months with wm6. is there anyway i can flash something into it. without activesync, but in the three colored boot mode?

Get into bootloader, plug in your usb cord and give it a minute...ON THE TRI-COLORED SCREEN do you see in the bottom corner "USB"??? If yes, you are OK. Get a stock rom such as the Tmo 2.26 and flash that. If you do not see "USB" in the bottom corner then as far as I know, you are fukd.
For more info on issues, read the linky in my siggy. There is valuable info there that may help with other ways to flash a rom.
Good luck.

i see usb
thanks, guess i am not fked then
Only problem is i have forgotten all about this now, and that i am sorry for.
But i have to ask you, as from norway wich stock rom to choose, what is stock rom, and when you say bootloader, is that an expression for the three colored screen or is that a program, that can flash in three colored screen? Thanks, i do not expect an answer on this noob questions, but i would really apreciate answers.

stock rom & bootloader
stock rom is the rom which comes with ur phone while purchasing it.. u can call it base rom..bootloader is tri-coloured screen which is bios for ppc if it gets fked then phone is bricked..next time if u cant boot up, then u can flash ur phone with the help of bootloader...

that was fast
thanks, but i do not think i have the rom that came with my mobile phone:/
and i do not know how to flash from tri colored screen, because all the files i have tried cant detect my phone.
ipl adn spl are 3.08 if that helps anything.

that was fast
is there an app you use to flash from tri colored

there is no need for any app, just connect ur phone to tri-coloured screen..u willl see usb in down left corner.. then ur phone is connected then run RUU utility.. if any problem comes i am online at hotmail... [email protected]

Can you power down? If not, remove battery for 1 seconds, the re-insert. Then press all at once the camera, comm and power buttons (or I believe you can also press the camera and soft reset. It is in the wiki explaining, as are some stock roms. Use any stock rom if you plan on flashing a cooked rom. The Tmo 2.26 is a decent stock rom, there is a 3.08 on the forum somewhere that you can also use. Get a stock rom. Get into the tri-colored bootloader. Look to see if it says usb in the bottom corner. If yes, connect your cable and using the ruu from the stock rom, flash your phone. Once a stock rom is installed follow the directions to cid/sim unlock your phone. Once unlocked, you can flash any cooked rom.
PS- I am assuming you have a G3 phone.
PPS- reading the wiki and the stickies are very helpful. Give them a try.

im sutch a noob
yeh i got same problem... i will try a hard reset but im at school... hope it fixes it... i got imate jasjam... BETTER WORK OR I WILL KILL MY BROTHER 4 STUFFING AROUND WITH MY PHONE

im sutch a noob
gah... it diddent work what do i do now????

Who wants to try a new way to go out from stuck splash screen?

Hi I have a problem trying to exit from bootloader a PDA's friend, so how can I get to work the mtty?
Sometimes i gain exit with mtty of bootloader screen just kill usb conn in activesyng letthe device in bootloader an conect... select USB port click on OK button and then task 28 erase DOC Chip and then task 28 55aa ready to reflash the same rom that has the problem.
but now i try it on my device an aku3 ipl spl 3.08... on bootloader in a PC Vaio with XP home SP3and....
it say invalid comand
so the dir is CMD
NOT USB
how can i get usb on the dir?
Any body knows?
i had the mtty .01, 2.11 and 1.42 and no one works
any idea?

SADNESS!!!!!!!!!!!!!!!!!
Somebody stole my wizard last night i was waiting for the BUS and two guys atacks me with a knife, they took my Wizard and my money. Again... and in some part i saw somebody called INSANAVACA saying that when the Mtty shows CMD we can put "format" and then choose the A character or B character... one of those options is the OS the other one... Neither him knows jeje and dont remember which one to chose... it starts to clean the DOC Chip.
It maybe works... i cant test it so if anyone can do it please, answer this maybe it works and we can get out of the Splash screens and bootloader stucks.
A long time ago I did this steps but the mtty shows me USB. full charge your batt, remove your SD and SIM card... enter in bootloaders... uncheck the activesync allow USB conection and kill Wcescomm.exe in Win XP taskmanager plug your device to usb, open mtty in all the places works even in the desktop... select USB in the drop menu... a blank screen will appear hit enter if it shows USB your done then... type:
task 28 (hit enter)
--it starts tho the cleaning--- done...
task 28 55aa (it works again in the same thing)
Close the mtty dont unplug your device and reflash it with the stock rom 2.26 Tmobile if you unplug the device you can try to plug it again but in the same port... (but my device is SuperCID unlocked) then goes to the custom ROM.
Maybe the "format" can works if in blank screen shows CMD... try it and let us know what happend ok?
I use the 1.42 Version.

hey thanks for the reply on my thread.maybe we can discuss my problem here.
my wizard is stuck at 2nd splash (the one with the ipl,spl,gsm and os versions)
falshing another rom do not fix the problem. ive even downgraded to several WM5 roms like wizard love, button rom and xda-mini s launcher.
i have a g3 cid sim unlocked wizard.
then lately i noticed, after attempting another manual hard reset, it says formatting failed. so maybe i need to force reset it using a pc. but wizard service tool wont work coz it will only work when synced on the pc.
can mtty forceley reset (hard reset) my wizard? how should i do it? what are the commands? thanks

i've read a thread and read meistrinis reply where he pointed out this thread:
http://forum.xda-developers.com/showthread.php?t=276963
hope this one works for me

lets check it!
dielo said:
i've read a thread and read meistrinis reply where he pointed out this thread:
http://forum.xda-developers.com/showthread.php?t=276963
hope this one works for me
Click to expand...
Click to collapse
I have redirect to a Universal commands for mtty but i cant be for sure if all works for wizards!
So download the mtty 1.42
Unplug your MiniSD card
Put your Wizard in bootloader mode
Kill the wcescomm or put in activesync not allow usb conections
then open the mtty
in ports or conectios you will see
com1
com2
com3
IRDA
USB
More or less I dont know deppending how many ports does your pc have.
choose USB
Be sure that your batt is almost 80% a 100% will be great but with 80% is fine
After choose USB dont move anymore and click ok... or connect something like that.
A blank white screen appear....
Then hit enter if it shows USB> type exactly this:
task 28
(it will work on something like clean the DOC CHIP at the end will show again USB>)
then type exactly this:
task 28 55aa
It will work again on something and
It will prepare the DOC Chip for the OS (FORMAT)
The device stills on bootloader so close the mtty dont unplug the device and downgrade to an original ROM WM5
These are the steps if the MTTY shows USB>
Select the USB port
hit enter in white screen
If it shows CMD>
type in the white screen after the CMD>
format
It will shows you what to choose option A or OPTION B
Here is the problem... Which one we need to choose...
and reflash an original ROM.
Tell us what happends please.
I HAVE MORE COMANDS but for G4 AND WHY IT WONT SHOWS USB!!!!!
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader

+ Que PPC said:
I have redirect to a Universal commands for mtty but i cant be for sure if all works for wizards!
So download the mtty 1.42
Unplug your MiniSD card
Put your Wizard in bootloader mode
Kill the wcescomm or put in activesync not allow usb conections
then open the mtty
in ports or conectios you will see
com1
com2
com3
IRDA
USB
More or less I dont know deppending how many ports does your pc have.
choose USB
Be sure that your batt is almost 80% a 100% will be great but with 80% is fine
After choose USB dont move anymore and click ok... or connect something like that.
A blank white screen appear....
Then hit enter if it shows USB> type exactly this:
task 28
(it will work on something like clean the DOC CHIP at the end will show again USB>)
then type exactly this:
task 28 55aa
It will work again on something and
It will prepare the DOC Chip for the OS (FORMAT)
The device stills on bootloader so close the mtty dont unplug the device and downgrade to an original ROM WM5
These are the steps if the MTTY shows USB>
Select the USB port
hit enter in white screen
If it shows CMD>
type in the white screen after the CMD>
format
It will shows you what to choose option A or OPTION B
Here is the problem... Which one we need to choose...
and reflash an original ROM.
Tell us what happends please.
I HAVE MORE COMANDS but for G4 AND WHY IT WONT SHOWS USB!!!!!
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
Click to expand...
Click to collapse
hey thanks, though drug_store's method worked for me and now my wizard is working and i have update 3 for my rom. still a big thanks to you for the starting point on where to look at.

Congrats Men!!!!
dielo said:
hey thanks, though drug_store's method worked for me and now my wizard is working and i have update 3 for my rom. still a big thanks to you for the starting point on where to look at.
Click to expand...
Click to collapse
Very good men!!! you're welcome.
Even if this method still hasn't been proved.

Here's a reason i'm taking Rom's out from Stickies.
So there's space for the important things like this on..
Let's face it sometimes a new thread on Bootfreezes and Bricks is more useful then an old one that people get discouraged by, because of it's length.
Made this one Sticky.

Noonski said:
Here's a reason i'm taking Rom's out from Stickies.
So there's space for the important things like this on..
Let's face it sometimes a new thread on Bootfreezes and Bricks is more useful then an old one that people get discouraged by, because of it's length.
Made this one Sticky.
Click to expand...
Click to collapse
great. you're right. thread like this should be stickied.

Wow
Stickie!!! hahaha so glad too see it thanks but.... is not prooved yet... so does anybody wants to try... damn if i had my wizard ...

It gets more renewed Attention to the most important problem.

Maybe....
You've got right!!!
I will make a deal With Tvaril to buy him his wizard but i need more info about to receive packages World wide. and the way to pay jeje...
I hope it can be truth in an easy way.

in the mtty, when i pres enter it getc CMD, when i type format it gets unavailable comand, so im still stuck on the align screen some other help

Man it sucks!!!!
But in sync screen?
Damn this is new huh!
I dont know what else can we do...
does you try to reflash again an originla ROM?
maybe ayou are in troubles cause your battery is too low...

display damage
i just find out that i damaged the lcd with the f****** glue. i was trying to glue the mask and the glue went on the LCD so i f***** up.
by the way the battery was full recharged, and everything was done like you said.

it sound very bad men!!!!!!
Does the display works? or it has issues?
maybe you can find a display.. so sorry to heard that.

Thank you!
thanks for this mate i was using mtty in vista using the compatiblity patch...
i downloaded all the 4 things who know they may be useful at some point of time for me when i need to do stuff.
Have a good day!
Regards,
Sam

good to hear it... but
why dont post the compatibility patch for all members?
come on share it here men!

I download mtty a while back, you know, just in case. Wellllllll, just in case happened yesterday. Mtty made it easy as pie and quick, too. Now, baby's fine and reflashed and happy again!

my friend has the same problem as this, his wizard g4 stuck on splashscreen when he flash love_rom using How to flash a new ROM to your Wizard... a little tutorial!. His problem was solved if he flash rom using this manual (I'm sorry for czech link, english version by Google translator)

My HTC Touch HD (Blackstone) was dead :(

Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!

did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM

I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.

okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.

Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.

here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY

thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.

VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?

you CHICKEN >"<

quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?

Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (

and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü

VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932

I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?

i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!

VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+

thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!

Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.

T5355 stuck on "TOUCH Diamond2" screen

Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355

Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!

enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job

I don't think you would be experiencing these problems with an original topaz

Please take care this is a HTC CLONE

Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643

run with a rom in bootloader, it shud work

enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.

If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?

Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.

My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".

nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !

help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?