please help i have flashing my htc diamond and after the screan was black , he not sycro, and i want to updte i have error 260, hard reset dont work, help
Try putting it into bootloader and flash another ROM.
Just press volume down + reset.
i have testing volum down and reset but he not work no syncro
dead is dead i tink the motherboard is hs , i don't say any other solution
any bady have a same problem , final solution jtag i tink
i'm in the same situation.... what do you did??
eny thing my htc is dead
So it won't even turn on? Can you see a black light?
Try removing the battery, put it in, hold down VOLUMEDOWN key (don't let go), and turn it on. Do you see a three-color screen?
What do you mean by "no syncro"? ActiveSync won't work with your device. But your computer maybe can still recognize it?
~codeslicer
same situation here, also after error code 260
doesn't react to anything, can't hard reset anymore...
suggestions?
or should i send it in for repair?
Kind regards
Pieter
I got from bro "cortez.i"
"(you get to bootloader mode by powering off the phone, then press-and-hold the down volume button and quickly tap your power button (do not press and hold the power button)"
good luck
Related
Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?
Have you taken the battery out?
Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.
i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error
Well did you try the special key sequence to try to turn it on?
special key sequence? U mean both softkeys and stylus into reset hole?
Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys
thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.
Ok, so your saying you tried it and it doesn't work?
im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.
ok I'm taking it that you didn't try that sequence because you won't say that you tried it.
Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.
Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.
take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.
marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.
So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.
OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.
Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.
Hey Folks,
well I've experienced a very bad problem. When I started to change my ROM again, my whole device hang up, nothing happened any more. No chance to do a Hard or Soft Reset, the Led-Ring does not even light up anymore when I plug in the USB. Neither via Notebook nore via outlet. I don't know whatelse to do, hopefully it's not dead...
Thx for all the answers and sry for my bad english...^^
can you enter in bootloader mode? if you can, it's everything ok.
Remove the battery for 30 seconds then replace it and see if it will then respond to any of the following... on switch/usb cable/bootloader mode/hard reset.
Well... the Diamond doesn't respond to anything... It isn't even recognised by Windows...
phr3n1c can you enter in bootloader mode with it? pressing volume down (on the left side) and reset in the same time, and keep holding untill 3 colour screen appears.
Nothing happens... OMG i could start crying...
WTF! If don't enter even in bootloader, I only can say that its totally bricked. Sorry
How could this happen? I just tried to install juices RoM, then it said that this isn't the right ROM for my Device, turned off the screen and.... nothing...
So there's no way for me to get this Diamond working again... I just got it for 3 weeks... 469€... mmh...
Keep trying to get bootloader mode...its very fiddely....
also try and charge your battery...was it at full charge before?
phr3n1c said:
How could this happen? I just tried to install juices RoM, then it said that this isn't the right ROM for my Device, turned off the screen and.... nothing...
Click to expand...
Click to collapse
Don't give up hope just yet, I've seen a few people on here that thought they bricked their Diamond but a few of the major contributors of the forum were able to work them out of it. Not saying it's a guarantee of course, but definitely a possibility.
2nd what the guy above me said, just hold volume down and the power button and try to get to bootloader mode... You should really be able to get to this, and once you can you'll be all set.
So the best thing for me is to leave this Thread here and wait for some answers I can try out...
Well... I use to read in this board since February and I always found all the answers to my questions...
This is the fact y this is my first post as well^^...
so i think i'll leave my xda alone 4 a while...^^ thx for all answers, upcoming and read...
mmh.. so there's nobody who's got any idea... thought more people could help me... mmh...
phr3n1c said:
mmh.. so there's nobody who's got any idea... thought more people could help me... mmh...
Click to expand...
Click to collapse
Do you flashed Diamond HARDSPL-OliNex first ?
ady_uaic said:
phr3n1c can you enter in bootloader mode with it? pressing volume down (on the left side) and reset in the same time, and keep holding untill 3 colour screen appears.
Click to expand...
Click to collapse
That is NOT the way to get into bootloader mode, if you have been trying that then there is no way you will enter the tri-coloured screen,
You need to press the power button as well as the volume down button along with the reset button to get into bootloader mode.
1) Take of the back cover of your diamond
2) Take out the stylus, notice a red dot in the bottom left corner? thats the reset button
3) Get your stylus ready to press the red reset button, but don't press it yet
4) Press and hold the POWER button and the VOLUME DOWN button, as well as holding down and pressing the reset button
5) After 3 seconds, let go of the red reset button but KEEP holding down and pressing the POWER and VOLUME DOWN buttons
6) Once the tri-coloured screen (bootloader) comes up, you can let go of the buttons.
That is how to get into bootloader mode, in depth. If that is not working that you have damaged your device quite a fair bit.
Remember if you didn't try pressing the power button to get into bootloader mode before, then there would have been no way you could have gotten into bootloader - try this method now and you might (hopefully) be flashing a new ROM in a matter of minutes.
Good Luck!
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
phr3n1c said:
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
Click to expand...
Click to collapse
Another reason why I stay away from eBay.
Did unplug the usb cable, then pull out the battery ?
Hhmm.. I wouldn't have thought a ROM could cause so much damage.
You could try this..
1) Leave the battery out for 30 minutes
2) Put it back in along with the charger
3) Try to turn on the device (hold the power button down for 15 seconds)
Selling the device on eBay should be your last resort. Try everything you can to get the device working for now.
phr3n1c said:
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
Click to expand...
Click to collapse
DO YOU FLASHED HARDSPL FIRST ? AND DOES YOUR DIAMOND IS UNDER GUARANTEE ? IF NOT, YOU CAN THROW AWAY.
Hold Volume down, the Enter Button and then press Reset... Hold the Volume down and the Enter button until the three colour screen appears... Try it....
Look here:
http://blog.jannewap.ws/2008/07/25/htc-diamond-reset-xda-diamond-hard-reset-anleitung/
yes, i flashed hardspl first... i dont know if it is still under guarantee if i bricked... doesn't another rom make your guarantee end? so nothing else to do...
PS: if i would have sold it on ebay, i had declared it as broken... just by the way... not to have any people think wrong things about me...
fixed it, please close
ShavedCivic187 said:
So I was texting on my Fuze and it froze. I hard reset it and now it won't start back up. Im using the latest Mercury Energy rom. It starts up, goes to where it plays the start-up sound and says "Energy Rom 3.0" and then stops. I have the touch response installed on it and it still vibrates when u touch it, so I dont think its too bad. Please Help! Thanx
Click to expand...
Click to collapse
Hold the Volume button down + the button in the middle + the reset button
keep holding until the screen goes to bootloader
CraZyLiLbOy said:
Hold the Volume button down + the button in the middle + the reset button
keep holding until the screen goes to bootloader
Click to expand...
Click to collapse
then reflash?
tryed holding the buttons and it didnt do anything.
He's advising that you hard reset. That's what I'd do, too, but if it continues to hang, flash a stock rom. You may need to go into bootloader manually if you do it over usb.
Fixed it please delete.
hard rest verizon phones
i think that verizon has ****ed the customers when i comes to hard resetting i think that they disable the option when you are try to do it with the whole volume button power button the reset thing i have gone through two phones because of this but now i found program that was leaked and it does it for me you go into that mode where you get that multiple colored screen and then once you plug you phone into your computer and then you run it and it hard resets the phone
that would be great if you can share how do you it with us, so any body have this problem can be fixed without asking too much.
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Lasarus said:
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Click to expand...
Click to collapse
try this:
read all steps first
turn off phone
pull out battery wait ten seconds
put battery back in (leave cover off)
hold the power button + hold volume down
press the soft restart button* (while still holding the power button + volume down)
keep buttons held down till you see the white screen and green logo.
note* push the button with stylus it is hidden under where the stylus goes in next to the camera.
plug into the computer and run SUES it'll say already have latest version update anyways? click yes
i had to do this when i bricked my phone, (my computer crashed while i was doing the update) it really saved my day.