Hi
As 25006 was a sh.. we need something better, here we go!
Done with AeroKitchen 3
All ramdisks included
Contacts works
Bubble breaker works
New softkeys
Should be faster and stablier than 25006
Link:
HERE WE GO
Do mirrors and post!
Screenshots in attachments
Woo hoo!!!!!!!
Flyboy!!!!
is there a way to update through the SD card ??
Coz there is a problem with the USB connection, its only charging and I make back up through bluetooth
thanx
torontovka said:
is there a way to update through the SD card ??
Coz there is a problem with the USB connection, its only charging and I make back up through bluetooth
thanx
Click to expand...
Click to collapse
Read the sticky about it and use the search button within the forum. It's all in here.
after install(Ramdisk 64 mb), expire windows
"This copy of Windows Mobile expires within 30 days on 05/01/2010."
i try install PocketMusic v5.3.5(last version, support WM6.5).
after install set language but i can't see button OK.
and i open application HiCalc v2.7, i can't close this application. (no button OK).
and can't change the default keyboard settings.
after the select button ok, the default keyboard not change.
big thanks aeroflyluby
ImanD said:
after install(Ramdisk 64 mb), expire windows
"This copy of Windows Mobile expires within 30 days on 05/01/2010."
i try install PocketMusic v5.3.5(last version, support WM6.5).
after install set language but i can't see button OK.
and i open application HiCalc v2.7, i can't close this application. (no button OK).
and can't change the default keyboard settings.
after the select button ok, the default keyboard not change.
big thanks aeroflyluby
Click to expand...
Click to collapse
Man As I see you installed incorrect version Check the build in about.
I download a file this morning(install 64 mb). source link http://www.4shared.com/file/256658728/338c0b7f/RELEASE23541.html
See About
whether you uploaded the wrong source?
ImanD said:
I download a file this morning(install 64 mb). source link http://www.4shared.com/file/256658728/338c0b7f/RELEASE23541.html
See About
whether you uploaded the wrong source?
Click to expand...
Click to collapse
Did you notice that softkey bar is diffrent between this screen and screens above?
Also, WM6.5 applications would not work on 6.5.3, because of dirrfent shell, you can assign OK/Close key to any hardware button and use it like a magic, it works in most cases
aeroflyluby said:
Did you notice that softkey bar is diffrent between this screen and screens above?
Also, WM6.5 applications would not work on 6.5.3, because of dirrfent shell, you can assign OK/Close key to any hardware button and use it like a magic, it works in most cases
Click to expand...
Click to collapse
OK, sip thanks.
btw about expired of windows?
ImanD said:
OK, sip thanks.
btw about expired of windows?
Click to expand...
Click to collapse
It;s fixed, it shouldn't appeatr, but if it does, try to find DeviceBeta entry in registry and change it to " "
Superb! Installing it now (64MB)
Will report if any more bugs found.
Regards
Jay
Two things noticed really
1: The expiration message pops up right after a fresh install (ImanD was right about this - please see attached pic)
2: After installing 64MB version, the RAM still shows as 14MB, is it right? or am I doing something wrong here?
More testing on its way.
Regards
Jay
hi rom is top speed but fantastic but got prob with ie will not show pages any ideas also cannot find registry was a full install 64 from 2003se any advice thanks
maxoutputuk said:
hi rom is top speed but fantastic but got prob with ie will not show pages any ideas also cannot find registry was a full install 64 from 2003se any advice thanks
Click to expand...
Click to collapse
I have to guess, what your problem is.
Search for Settings Network and switch from ISP to My Home Network.
Enter Advanced and check Proxy to 'connects to the internet'
Good Luck
Is it really a final version, because after a fresh install I got that message too. expires within 30 days.
The expire date shows when I enter the correct date exp. 2010-04-07, but if I let the date by default 2009-01-01 it doesn't show the expire message.
hi it seems to think its got the page and shows connection but no website on screen also no mms tried sprint crc and 50.3.1.7 arcsoftmms no good on o2 uk thanks for answering so quick
dante05 said:
Is it really a final version, because after a fresh install I got that message too. expires within 30 days.
The expire date shows when I enter the correct date exp. 2010-04-07, but if I let the date by default 2009-01-01 it doesn't show the expire message.
Click to expand...
Click to collapse
Oh so that was my fault, I didn't change date because it is waste of time (only-rom-flashing himalaya)
I will fix it.
Now we got him!
aeroflyluby said:
Oh so that was my fault, I didn't change date because it is waste of time (only-rom-flashing himalaya)
I will fix it.
Click to expand...
Click to collapse
Shame on you!!!
Go into prison, directly, do not pass Start, do not take any money!!!
I plead for a temporary shooting, as a mild, but fair, punishment.
Or shell we shave off his head and send him to death?
OK - ninety nine years more, of hima rom cooking, as practise.
I like to be prosecutor, defender and judge in one person! (smile)
Hi! First of all, thanks for an awesom ROM. No issues so far, except;
ActiveSync? It's not working? I turned off the advanced networking function but that causes the device to lock up when connected.
Am I doing something wrong or is this a known bug?
Related
Anyone else? Open a message (any type) and it opens at the bottom of the message, so that I can't see the message or who it's from without scrolling up. It's annoying!
Also, if I use the D-pad to scroll through the messages, each message opens up in the same manner - at the bottom.
Is there a fix for this?
Thanks,
FrankyG
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Mark Crouch said:
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Click to expand...
Click to collapse
Thanks for the reply , twice
Can anyone with a stock TyTN confirm what the default registry setting is?
Thanks,
FrankyG
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
patr!k said:
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
As do I, and I still have the problem after checking my settings. Can someone give us an answer on how to fix this issue?
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
patr!k said:
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
Click to expand...
Click to collapse
Huh? Could you explain a bit less cryptically?
Thanks a lot for the hint! I love this forum!
http://www.ujeb.pl/4070/
Any more info about it?
Thanks.
mtodak said:
http://www.ujeb.pl/4070/
Any more info about it?
Thanks.
Click to expand...
Click to collapse
Zip is attached, if that's what you wanted.
Jazzamataz said:
Zip is attached, if that's what you wanted.
Click to expand...
Click to collapse
Wow, quick one.
Thanks again.
PS. Any link with guide to it?
mtodak said:
Any link with guide to it?
Click to expand...
Click to collapse
Hahah!
(You're kidding, right?)
Just install and start using it...
It's very easy to use...
I love it...
(Except for the typo's: Frends instead of Friends and Conn Manager instead of Comm Manager But that we can change!)
And there a some bugs. e.G. it often crashes when you are entering too much contacts for quickcall. But at least a nice piece of software.
kkempe said:
And there a some bugs. e.G. it often crashes when you are entering too much contacts for quickcall. But at least a nice piece of software.
Click to expand...
Click to collapse
Any help with getting rid of evaluation version plz ?
Doesn't matter, piece of crap IMHO.
Here maybe some info on the use of the software.
final release?
Hi,
Anyone know when the final release will be available?
Regards,
Joao
@Joao; this is not a beta version but a trial.
lol so if you like it buy it . warez kills developers who spend hours developing on our behalf
There is a 15 day trial period and i have had it for 2 days. I like it. it is great for 1 touch voice dial or starting applications. Looks like i will buy it. it is only $15 bucks.
The only thing i want to know, is it can be executed by default instead of device comming up in the Today screen. I have the new ATT tilt (kaiser).
touch commander
There is a 15 day trial period and i have had it for 2 days. I like it. it is great for 1 touch voice dial or starting applications. Looks like i will buy it. it is only $15 bucks.
The only thing i want to know, is it can be executed by default instead of device comming up in the Today screen. I have the new ATT tilt (kaiser).
I tried it had fatal exception errors and I wish they were able to get touchflo incorporated to it. that would be nice instead of assigning a button to start it.
antnee said:
I tried it had fatal exception errors and I wish they were able to get touchflo incorporated to it. that would be nice instead of assigning a button to start it.
Click to expand...
Click to collapse
Hey i have it incorporated with touchflo just have to edit the touch flo's config txt to open the touch commander when u scroll down up it work perfect for me
soundworkspr said:
Hey i have it incorporated with touchflo just have to edit the touch flo's config txt to open the touch commander when u scroll down up it work perfect for me
Click to expand...
Click to collapse
can you explain how? that would be nice...
antnee said:
can you explain how? that would be nice...
Click to expand...
Click to collapse
yea seriously...how the hell did you do that?
Mine works...
Since I have Touch Commander installed on my card, I edited FTouchFloConfig.txt (txt file is in \Program Files\FTouchFlo on the device, not the card) to read:
DownUpApp:\Storage Card\Program Files\TouchCommander\TouchCommander.exe
DownUpAppCmdLine:
Then, soft reset device. Launch FTouchFlo. Manually launch Touch Commander to clear screen that asks for registration number, e.g. use it as a trial. Close Touch Commander.
Now, to make it work, I very lightly slide my finger on the Today Screen from the bottom to about a half inch from the top.
The sensitivity may have to be adjusted if it can be. Practice until you are used to it.
If I could get it to perform more consistently, I think this it is a great program. For now, I have remapped my PTT button to launch Touch Commander.
already been discussed !! and posted a CAB file which already had eFrost's touchFlo modified to it ..etc
http://forum.xda-developers.com/showthread.php?t=342715
still gives error due to it being a trial ..etc ... but the commercial (buy ) application will work fine ... version 1.02 !!
Search is your friends !!
Just trying to help.
UnicornKaz said:
already been discussed !! and posted a CAB file which already had eFrost's touchFlo modified to it ..etc
http://forum.xda-developers.com/showthread.php?t=342715
still gives error due to it being a trial ..etc ... but the commercial (buy ) application will work fine ... version 1.02 !!
Search is your friends !!
Click to expand...
Click to collapse
if you modify the pages one at a time and copy the files-appinf1.0.0, contactinf1.0.0, quickcalltree1.0.0, settings and thumbnalinf1.0.0 to another location and sofreset the device. then copy these files back to the folder and restart the program. modify a different page and repeat. this has the program working with all mods you have done i.e. contact pages, program links (with names and icon)etc..
worked for me.
Hey Guys
I just purchased and downloaded MS Voice Command 1.60 M2M and every time i try to install it I get the following error at the very end of the install:
"An unrecoverable error occurred in setup. Reset the device and try again."
It does seem to install it but nothing of MS VC works.
Having done a forum search I couldnt see any ideas so, i'm here asking for your help
Any ideas?
If I remember correctly, i'm running the Diamond TLR build ... :/
just tried SK-Tools to delete the old version and resinstall direct from the CAB file .... no luck.
Hi,
can you tell me your EXACTLY version of VC.
On some versions you'll need to change some files.
Hey mate
VoiceCommand_english_intl.exe
Microsoft Voice Command UK PPC 1.60 for M2M
Got it from Handago or something like that today
If I need new files, any idea where I might get them from?
Bit cheesed to be honest, I've bought this software, paid for it and it don't work.
OK,
to get the exact version (1.60.xxxx.x) go to Start -> Settings -> Voice Command. At the right side you see "v1.60.xxxx.x". The x's are the exact version.
VC 1.6 have problems to work since Windows Mobile 6.x. I've made a CAB for the "normal" Touch a few months ago. With this patch I get it also to work on my Diamond.
I use an extremly old version of VC (1.60.4622.0). Perhaps it also works on your version.
What you have to do:
- Intall your VC
- Ignore the error message
- DEactivate VC (Start -> Settings -> Voice Command -> uncheck "activated")
- Install my CAB (you have to copy it first to the Phone)
- Activate VC again
Here the link: http://forum.xda-developers.com/showpost.php?p=2031281&postcount=7
Let me know, if it works
funnysurf said:
OK,
...
I use an extremly old version of VC (1.60.4622.0). Perhaps it also works on your version.
...[/URL]
Let me know, if it works
Click to expand...
Click to collapse
Thats the version that was sold to me earlier.... why are these online shops selling such old versions????
Will try your cab now.... brb
Nope..... thanks for your cab but still nothing .... just hold down button 1/left upside down phone and "dink".
Thats it.
Ahhh,
OK. These "old" version don't assign a key of Diamond to VC. Try to assign it manually in Settings. I use it only with my BT-headset for that. So I didn't assign a hardware key to VC.
Tell me if it works. If it's so, I'll make a new CAB with key assignment to the left (phone up) key.
thats the thing mate. The ONLY key I have assignable in Buttons is key 1 which im assuming is the phone up/left key? As it is, i've assigned this to VC and I only get a "dink" when I hold it down.
edit: seriously .... no other buttons are listed in that screen just button 1
Monty Burns said:
thats the thing mate. The ONLY key I have assignable in Buttons is key 1 which im assuming is the phone up/left key? As it is, i've assigned this to VC and I only get a "dink" when I hold it down.
edit: seriously .... no other buttons are listed in that screen just button 1
Click to expand...
Click to collapse
The Diamond has ONLY this one assignable (for long press). The "dink" is OK. Did you try to say something like "help" in the phone? Did it answer your "help" with an explanation of how to use VC?
yeah, tried "help" ... nothing.
I know its not working as on my G900 and tytn before that, a little microphone icon would appear in the bar at the top - its not appearing here.
Hm,
i've tried it now also. There ist no icon... And also no reaction :-(
I never tried it with a hardware button since now. I'll try to get an answer for that. Why does it work (for me) over BT, but not on HW-key...
I'll make some tests, but not more today (tomorrow at 5 a.m. I must get up).
Tell you then my solution, if I get one ;-)
funnysurf said:
Hm,
i've tried it now also. There ist no icon... And also no reaction :-(
I never tried it with a hardware button since now. I'll try to get an answer for that. Why does it work (for me) over BT, but not on HW-key...
I'll make some tests, but not more today (tomorrow at 5 a.m. I must get up).
Tell you then my solution, if I get one ;-)
Click to expand...
Click to collapse
Stay up!!!!!
Nah, thats great mate Thank you very much for trying today - really appreciate it
Enjoy tomorrow and I look forward to any ideas you may have
Hi,
I didn't forget you. I came home about 20 minutes ago. And I'm not realy able to think at the moment...
Is it for you OK to get (if I find one) an answer tomorrow?
Sorry for that...
mate
you are not under contract, you are here on your own free will
You help when you like and i thank you for ANY help you can provide, even if its next year!
Hi
I have the exact same problem so im also listening intensely for a solution
Hey Deeds
a few wise people are looking in to this for us. So far, we've tried a custom cab to fix it and also downloading the latest frame work from MS. Sadly, neither have worked.
You can follow the updates, questions and ideas in this thread
great thanks monty!
edit:
ive been trying for a couple of days now, with the same errror message as you.
ive also tried the patch linked to in another thread but also with no succes
and i too get the same ''dink'' sound even though i have mapped the button to VC instead of the default setting.
but it seems that this is the right place for answers so i guess i will just have to be patient
what rom are you using? I currently have the Diamond TLR, are you on a standard HTC or cooked?
and yes, if anyone in the world can solve it, this is the place they will be ... fingers crossed!
using
Rom: 1.93.403.2 danish
not really sure what cooked means ?
Since we don't have a common source of this new TF3D and every cooks have it's own implementation. I think it's better to centralize the bugs and fixes discussion to collects all the brain power/knowledge here to get this puppy stabilize.
Current base: TF3D2 from Topaz rom
Read the following rules before you filed a bug:
This thread is not about how to install TF3D and assume you got TF3D installed and working
This thread is intended to get TF3D working as what it should be. Go somewhere else for Mod/Customization, and how to do this and that.
Make sure you got Opera 9.5 installed as many features rely on it.
Read the existing list first before you file a new one.
Only report reproducible bug w/ details/steps to reproduce (Don't report any random crash/bug that you cannot even reproduce it)
You are welcome to report any existing bug that is not happening on you so that we could look into the diffs
Fixed Bug list (fixes in the attached zip file):
TF3D show HTC logo but won't start: Missing htcDutils.dll
Camera button don't start: Use the Camera package from Rhodium
"My contact card" in setting is not working / call history crash ..etc: Missing httpclient.dll
"Use Camera" in "Edit Contact Card" brings up video recording instead of picture taking: Set HD Camera Apps as the default camera apps.
"Sim card not ready" error for SMS message (call history > call entry > Messages tab): Missing CommManagerDll.dll
"Key Lock" status is not saved after soft-reset. Fixed w/ latest Rhodium packages (don't remember exactly which). Current workaround is change it in registry.
Existing bug list:
Sms reader tab can show only 25 messages (I cannot confirm it since I don't have that many SMS msg)
TF3D Panel is not working. PM Pubba already to see if he could help
bug in itje 4.0 beta 3
- call history crashes almost all time
- "all people" crash after 1 swipe down
are ok in your rom?
guap said:
bug in itje 4.0 beta 3
- call history crashes almost all time
- "all people" crash after 1 swipe down
are ok in your rom?
Click to expand...
Click to collapse
I don't have this issue. I bet it's the missing httpclient.dll
httpclient? Can you share this file? I have the same issues as itje in my rom
http://forum.xda-developers.com/showthread.php?t=486582
edit:thx, found by myself but it doesn´t work. I just copied it to the windows folder, let´s see if there´s a change by cooking it in but I think it won´t help. Maybe there´s a missing reg key or sth. like this.
@guap
What do you mean by swiping down? The contact pictures in TF3D? I don´t have this issue, only the issues in the call history tab.
jackleung said:
I don't have this issue. I bet it's the missing httpclient.dll
Click to expand...
Click to collapse
yes, I found the refrence to this too..
But I have not yet found what cause the weather not to show up on calendar tab "today" tab
any one?
Hmm weather shows up in weather tab on my rom. Did you set your city in the clock settings area? I think thats what causes it to work
weather shows up in your B3 as well Itje.
It's set exactly as Bxsteez says, you have to change the location in the clock..
I can not get it to change to farenhiet though. Oh well something is better than nothing
Bxsteez said:
I can not get it to change to farenhiet though. Oh well something is better than nothing
Click to expand...
Click to collapse
nto much of an issue here, we use both F and C, often at the same time!
fards said:
weather shows up in your B3 as well Itje.
It's set exactly as Bxsteez says, you have to change the location in the clock..
Click to expand...
Click to collapse
lol, typical
sometimes you work so much to find a sollution that you are looking to deep into it, and not seeing the easy one right before your eyes...
Camera button don't start: Use this (rename 2 files from cameraHD to camera), or camera.exe provided by Itje
Click to expand...
Click to collapse
Quick question on this. This is for the camera button in the pictures tab or the hardware camera button?
itje said:
lol, typical
sometimes you work so much to find a sollution that you are looking to deep into it, and not seeing the easy one right before your eyes...
Click to expand...
Click to collapse
Yeah sorry I didn't even realise it was a problem that one, until I saw this thread as I was playing with it earlier on today, I presumed it was common knowledge.
BXsteez, I think that's for the camera button in the photos tab.
So the camera application is called camerarunner.exe and i should rename camera.exe to camerarunner.exe
jackleung said:
"Use Camera" in "Edit Contact Card" brings up video recording instead of picture taking
Click to expand...
Click to collapse
What about this one? Do any of you encounter this or not?
Bxsteez, that's right. U can rename Skype.exe to camera.exe to have it called Skype instead in the Photo & Camera tab.
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
itje said:
yes, I found the refrence to this too..
But I have not yet found what cause the weather not to show up on calendar tab "today" tab
any one?
Click to expand...
Click to collapse
Can you share your solution?Is it the .dll that jack mentioned?
@jack
Yeah I got the same camera issue
it was very simple: select YOUR city (and not "local" in new clock tab
Bxsteez said:
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
Click to expand...
Click to collapse
How are you coming with this?
If this works with the latest Jerpelea Kitchen then I am happy to try tweak it to work.
Let me know, Kodiak
Bxsteez said:
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
Click to expand...
Click to collapse
have you seen my posts on this?
guap said:
it was very simple: select YOUR city (and not "local" in new clock tab
Click to expand...
Click to collapse
Thx mate, but I mean the contact tab which makes some problems. Itje said, that he fixed this issue.
Hello Gents!
My trusty D1 I could show the weekday in TFL3D, unfortunately that cab file does not work with the D2. Does anybody have any idea??
See here:
http://forum.xda-developers.com/showthread.php?t=398265
=> 23. Show Weekday in TFL3D
Thank you guys for any insight,
Cheers, Studebaker
This "hack" would be great if only it didn't overlap with the alarm setting below the minutes (see overlapping below the 10 of the 15:10 reading of the clock):
It also changed the string "Camera" to "IDS_CAMERA" (lower right corner)
Maybe somebody (the author of this cab??) can make some changes...
Try this updated version with abbreviation of weekday.
Works with german Topaz and MDA V, don't know about other languages.
http://mytd2.blogspot.com/2009/06/zusatzliche-wochentagsanzeige-mo.html
Nice blog, btw ...
Tatsch said:
Try this updated version with abbreviation of weekday.
Works with german Topaz and MDA V, don't know about other languages.
http://mytd2.blogspot.com/2009/06/zusatzliche-wochentagsanzeige-mo.html
Nice blog, btw ...
Click to expand...
Click to collapse
Does not work with my topaz though
Tatsch said:
Try this updated version with abbreviation of weekday.
Works with german Topaz and MDA V, don't know about other languages.
http://mytd2.blogspot.com/2009/06/zusatzliche-wochentagsanzeige-mo.html
Nice blog, btw ...
Click to expand...
Click to collapse
Does not work with my topaz though
This is a german language specific CAB, if someone with an english language device sends me the file 7e640092_manila from their \windows folder, I can make one for english language too. Thanks!
.
Install and/or use Advanced Config,then Menu -->More Settings --> TouchFLO3D (ignore error) --> Home page date format (choose one from 13 available !) --> tap Change --> Voila!
If you have overlap problems with alarm just choose a shorter date format or install Klaxon2 alarm clock,it will overwrite the standard windows reminder. In my case everything fits, see my home screen :
EDIT:
Same discussion here: http://forum.xda-developers.com/showthread.php?t=530636
Would be interesting to know if it's possible to disable "No Alarms.." text (don't know the exact message in WWE roms) in order to have very long date format even when Alarm is off
sualc said:
[*]Would be interesting to know if it's possible to disable "No Alarms.." text (don't know the exact message in WWE roms) in order to have very long date format even when Alarm is off
[/LIST]
Click to expand...
Click to collapse
Yes, possible.
Cool, how?
Edit it out of file 7e640092_manila ... while you're at it - can you send me a copy of that file? Thanks!
TinTin said:
Edit it out of file 7e640092_manila ... while you're at it - can you send me a copy of that file? Thanks!
Click to expand...
Click to collapse
Here you go...I quickly tried to look in it with Manila Editor v.0.2 but didn't see anything...what do you use to edit? If it's not too demanding, can you edit for me please? Just remove the "no alarms..." text and I'll test it. Thanks
Good morning Guys! Thanks for all the helpful hints!
@ Sualc: Advanced Config did the trick!!! I did not use it since it will produce a lot of error messages and I did not believe that application is really suitable for the T2. But the weekday works like a charm. Does anybody now what to choose in the performance section of Advance Config? I suppose the values for the T1 might not match, right?
Have a great weekend guys!
Studebaker
Studebaker72 said:
Good morning Guys! Thanks for all the helpful hints!
@ Sualc: Advanced Config did the trick!!! I did not use it since it will produce a lot of error messages
Click to expand...
Click to collapse
Hi Studebaker72, in my experience the error message we are talking about is THE ONLY error (and it's only a message) I get when using AdvancedConfig,maybe it will be solved with the next release of the app...I made various tests by changing the Performance Parameters, but I ended up keeping the Advised values (still better than Default), because for higher values I got scrambled landscape screens (with wm6.5, not with 6.1). My advice is to try by yourself, you don't risk anything. To have noticeable improvements you should use also HD Tweak (d'oh!another non specific app, but it works),go to point 14 (touchFLO3D) and set Sensitivity to Intermediate and Pression to Normal (default). Again, do your own tests, these are values that suit me, but maybe not you
If you don't know what day your living in I think something's wrong
WilcoD said:
If you don't know what day your living in I think something's wrong
Click to expand...
Click to collapse
Must be something wrong aswell if you always know what day of the week it is...never been on vacation ?!
I'm on vacation right now
Here's my watch I always know what day it is
Oke, back on topic
FRI 26 ?!?!? Of course you know what day it is...Your presence here is so precious, thanks for your contribution.
Tatsch said:
Try this updated version with abbreviation of weekday.
Works with german Topaz and MDA V, don't know about other languages.
http://mytd2.blogspot.com/2009/06/zusatzliche-wochentagsanzeige-mo.html
Nice blog, btw ...
Click to expand...
Click to collapse
Ahm, does this nice German application also exist without abbreviation? So it does show i.e. "Dienstag, 19.05.2009" instead of "Di, 19.05.09"?
Thanks guys, Studebaker
yes, it does, I'll attach it to my blog - check in a few
http://mytd2.blogspot.com/2009/06/zusatzliche-wochentagsanzeige-mo.html
Only for german language devices..
That's goooooood news..........!!!!!!!
Thank you so much Dude, that is exactly what I was looking for!!!
Cheers, Studebaker