Database Develop

Sluggish/unusable performance after apps2sd on Cyan 4.2.2

I got a shiny new class 6 16GB sd card. I partitioned it at about 15.5GB fat32 and 512 ext2, using the info in cyanogen's wiki: http://wiki.cyanogenmod.com/index.php/Apps2SD_On_CyanogenMod
From there I did the ext3 and then the ext4 updates.
Although I've searched for answers for a few hours now, I've been unable to determine why the device slows to a crawl at each point of user interaction at this point. Even unlocking the screen can time out...
I backed out the changes and copied the apps back over to internal storage and everything is zippy again, so at this point I am looking for suggestions. One thing I noticed was that when I used parted to delete the ext partition so the apps wouldn't go back to the card on the next boot, it still listed the ext partition as ext2. Can someone running ext3 or 4 let me know whether parted lists their partitions as such or if they are always reported as ext2?
What other techniques should I try? I would very much like to make this work as I get constant low-space warnings in my current setup. Thanks.

jasper1 said:
I got a shiny new class 6 16GB sd card. I partitioned it at about 15.5GB fat32 and 512 ext2, using the info in cyanogen's wiki: http://wiki.cyanogenmod.com/index.php/Apps2SD_On_CyanogenMod
From there I did the ext3 and then the ext4 updates.
Although I've searched for answers for a few hours now, I've been unable to determine why the device slows to a crawl at each point of user interaction at this point. Even unlocking the screen can time out...
I backed out the changes and copied the apps back over to internal storage and everything is zippy again, so at this point I am looking for suggestions. One thing I noticed was that when I used parted to delete the ext partition so the apps wouldn't go back to the card on the next boot, it still listed the ext partition as ext2. Can someone running ext3 or 4 let me know whether parted lists their partitions as such or if they are always reported as ext2?
What other techniques should I try? I would very much like to make this work as I get constant low-space warnings in my current setup. Thanks.
Click to expand...
Click to collapse
just used parted to check and it says ext4 .... try using this guide .. worked really well for me to partition my sd ... also if you're having all these problems try wiping dalvik-cache and even data and your ext* partition if it comes down to it

What recovery image are you using?

jndd333 said:
What recovery image are you using?
Click to expand...
Click to collapse
amon ra's 1.2.3
EDIT: lol thought you were the OP

A more careful walk through the partitioning process and I can confirm that everything works as expected, as well as confirming that if upgrade_fs fails, then ext2 is a total dog. One particularly confusing thing was tracking down whether a swap partition was needed or not, but on the latest cyan roms it isn't so I skipped that one.

apps2sd question

i searched for this and came up with some links, but none to verify my exact question which is, do i need a certain ROM, or recovery image, i have the RA-dream-V1.5.2. to apply apps2sd, i am currently running the latest cyanogen ROM, do i need a sd card reader or can it be done just by using terminal emulator, and i just bought a 4gb class 6 from new egg, and i was wondering what do you guys recommend for my ext2 partition space to be? so if you guys have any info on this it would be great if you threw it my way thank you!

Most rom have it enabled automaticlly when it sees an extX partition. The recovery is not required, but helpful if you don't have a linux system or other software to create the partitions on your computer. No card reader is required unless you want to format it that way. The only terminal commands you would need would be in the recovery console for you. The space is up to you and your needs and does not increase or decrease performance either way.
See the link below and it will help you doing it the manual way and with Amon_RA's recovery.
http://wiki.cyanogenmod.com/index.php/Apps2SD

thank you, you were a bunch of help, i shall try this when i get home tonight

No problem, let me know how it goes.

it asked me for swap-size and also ext2-size, im not to sure what numbers i need hmm?

If you plan on using a hero rom put in something for swap, if not put zero. The put in the amount of ext you want for apps. (normally between 256-512)
To upgrade the file system from ext2 -> ext3 use the command upgrade_fs in the recovery console.
Look at the link I gave you and scroll down to the Amon_RA section if you need more help.

it said upgrade_fs not found (nvm)
i got ext2 to ext3 thank you for all your help sorry for being a pain dude...

so to make sure i did it right, how much available phone space should i have?

It varies based on the cache you have for the apps, but I have 68mb but I have been running the same rom for a while. It should be around 80mb if you haven't done anything to build the cache, but I have the 1.33.2005 SPL which increases the internal memory size.

I get the same error "upgrade_fs not found" when I want to upgrade to ext 3 from console. From Amon_Ra's recovery I get an error too when I want to upgrade to ext 3. The other SD card I have worked perfectly with exact the same steps. What is wrong? Thanks

if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?

sakumaxp said:
i guess thats the same?
Click to expand...
Click to collapse
As the upgrade_fs script, yes.

evilkorn said:
As the upgrade_fs script, yes.
Click to expand...
Click to collapse
yeah thats what i did because it did the not found error, so i was like meh, sounds like the same haha

sakumaxp said:
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
Click to expand...
Click to collapse
I get an error when I press "upgrade ext2 to ext3" on my 2 GB card, the 1 GB card is done already.

sorry dude im a noob at this thing myself i guess one of the senior guys gotta answer this for you =\

Very strange, after many attempts suddenly I made the partitions, I don't know why but it worked

well thats good to hear =]

Apps2SD - Very Confused!

First I am sorry if the answer to my question is posted somewhere on this forum but I have searched and searched and am not finding what I need.
I have rooted my G1 after it went belly up a few weeks ago, was hanging on boot with a blank screen.
I now have the following:
cm-recovery-1.4.img
ota-radio-2 22 a9 26I
4G class 4 SD Card
I followed the directions for the root on Wiki. All went well with the root and my phone is now working.
I want to install Apps2SD but for the life of me none of the directions I have read and tried work. When I do the install and then click on Apps2SD I get the Ooops you need to read the tutorial and the location of the tutorial (which comes back with a 404).
I have my SD partitioned with the Fat32, ext2 and a swap.
I have application settings/Unknown sources checked.
Under SD Card & phone storage it shows my SD card secondary as just short of 1 gig which is what I set the partition. Internal phone storage is showing 70 MB.
The current location for the apps2sd.apk is the root of my SD card on Fat32. Is that the correct location? If so what am I doing wrong?
I've now put in over 6 hours trying to get apps2sd up and running.
So can someone please tell me step by step what I need to do now to get apps2sd installed and running?
One really confused redhead in Seattle.
Thanks so much.

Everything you need to know is right here:
wiki.cyanogenmod . com/index.php/Apps2SD
Be sure to close the gaps in the URL. I'd post a hyperlink, but I don't have rights to do so yet.
If you're having consistent issues with this, I would suggest the Amon-RA recovery method outlined in the link above. Normally, I go the Gparted route, but if you're not running a Linux distro already it might be more hassle then it's worth.
My suggestion:
Flash Amon-Ra's recovery (wiki.cyanogenmod . com/index.php/RE-recovery-img)
Use the options in Amon-Ra to set Fat32, ext3/4, and SWAP (optional)
Done!
I directed my room mate and my girl friend (both non-tech-savvy people) to use the above method and they had no issue.

RedMagnolia said:
First I am sorry if the answer to my question is posted somewhere on this forum but I have searched and searched and am not finding what I need.
I have rooted my G1 after it went belly up a few weeks ago, was hanging on boot with a blank screen.
I now have the following:
cm-recovery-1.4.img
ota-radio-2 22 a9 26I
4G class 4 SD Card
I followed the directions for the root on Wiki. All went well with the root and my phone is now working.
I want to install Apps2SD but for the life of me none of the directions I have read and tried work. When I do the install and then click on Apps2SD I get the Ooops you need to read the tutorial and the location of the tutorial (which comes back with a 404).
I have my SD partitioned with the Fat32, ext2 and a swap.
I have application settings/Unknown sources checked.
Under SD Card & phone storage it shows my SD card secondary as just short of 1 gig which is what I set the partition. Internal phone storage is showing 70 MB.
The current location for the apps2sd.apk is the root of my SD card on Fat32. Is that the correct location? If so what am I doing wrong?
I've now put in over 6 hours trying to get apps2sd up and running.
So can someone please tell me step by step what I need to do now to get apps2sd installed and running?
One really confused redhead in Seattle.
Thanks so much.
Click to expand...
Click to collapse
If you have your partitions already set up correctly then flash CM 4.2.15.1 it will automatically setup a2sd for you. If it doesn't then your partitions are messed up.

Does it support ext2? I've always thought you had to bump up to ext3 or ext4. I also thought EVERY ROM had automatic apps2sd.

Partition SD card on Windows for people who can't be bothered to do it properly ;)

Firstly, BlaY0 has a great tutorial on how to do this properly, I suggest you do that to learn something.
Secondly, I cannot confirm that this is 100% safe. BlaY0's method should be 99% safe, I don't know about this as it is all automatic. BlaY0's method is tried and tested, this is not. I only used this method as I had a new SD card and I was in a hurry (exams coming up ) and I didn't have time to remind myself of BlaY0's method, and CWM only allows you to create up to 512mb partition. Also, I had a new computer, and I don't have time to set up ADB all over again.
Anyway, this is a method for people who don't want to use ADB to partition their SD card for A2EXT or DATA2EXT (a.k.a. apps2sd, etc etc), and are using Windows. If you're running linux, you could use something like gParted to partition it, not sure about OS X though. This method will allow a Windows user to create an EXT partition on their SD card alongside the FAT partition.
1) Download and install Minitool Partition Wizard, from here.
2) Open the program and delete all partitions from the SD card (which you will have inserted into the computer using an adapter or something). DO NOT DELETE THE PARTITIONS FROM THE HARD DISK! MAKE SURE YOU KNOW WHAT YOU'RE DELETING. Oh, and make sure the SD card is backed up
3) Create a FAT32 primary partition. You decide how big you want it, but I'd advise you leave 1024mb (1gb) for the EXT partition.
4) Create an EXT2/EXT3/EXT4 (you decide) primary partition. Use up the rest of the space on the SD card.
5) Click assign/OK/whatever and wait for it to complete
6) You now have your partitioned SD card ready for an A2SD ROM!
7) You need to assign a drive letter to the FAT32 partition. Not sure about the EXT partition. At first I forgot to do this and my card didn't show up in Windows, though Partition Magic can still see it.
Like I said, do yourself a favour and use BlaY0's method here, but if you're lazy or you don't have time or ADB doesn't work anymore, use this.

Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB. Well, you're right but that's why I made a customized version of fake-flash that can do bigger... to 1 GB. It can even add second ext partition for some exotic types of data2ext. On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Sent from my HTC Legend

BlaY0 said:
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB. Well, you're right but that's why I made a customized version of fake-flash that can do bigger... to 1 GB. It can even add second ext partition for some exotic types of data2ext. On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Sent from my HTC Legend
Click to expand...
Click to collapse
Ah, I didn't know about your customized CWM, I think I'll just use that next time

BlaY0 said:
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB...
Click to expand...
Click to collapse
I remember some version had the ext menu up to 4GB
BlaY0 said:
On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Click to expand...
Click to collapse
Didn't know that, good to know, for those of us still using data2ext, this is important...

Wish this was up earlier, spent an hour repartitioning my card using parted.Couldn't upgrade to EXT3 and ended up using CWM 3.0.2.8 to do it instead lol

What CWM is using under the hood for partitioning is actually parted.
Sent from my HTC Legend

Tried it but it didnt work not sure what the problem is...
formatted my SD to FAT 32 and reserved 1G for EXT3 both as primary partition in the Mini Partition Tool
Plugged it in my phone,
Ran ADB shell
# a2sd --enabled, rebooted
on reboot nothing seemed to have changed... went back to ADB shell
tried a2sd --free it says A2Sd is not active ...
a2sd -- enabled again and it says it is enabled but not active
so im guessing it cant read or recognize the EXT3?!
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?

QkSi1ver said:
Tried it but it didnt work not sure what the problem is...
formatted my SD to FAT 32 and reserved 1G for EXT3 both as primary partition in the Mini Partition Tool
Plugged it in my phone,
Ran ADB shell
# a2sd --enabled, rebooted
on reboot nothing seemed to have changed... went back to ADB shell
tried a2sd --free it says A2Sd is not active ...
a2sd -- enabled again and it says it is enabled but not active
so im guessing it cant read or recognize the EXT3?!
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
Click to expand...
Click to collapse
Take me through what you did, step by step. You say you reserved 1G for EXT3, but did you actually format it as another partition?

QkSi1ver said:
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
Click to expand...
Click to collapse
It has been mentioned here like a gazilion times, boot up your device with logcat and see the first few lines...there is your answer!
Google how to wait for the device with logcat

1) Downloaded and installed Minitool Partition Wizard from your link. I got the free home edition
2) backed up my SD card and Open the program and delete my SD card partition ( which is in a card reader)
3) Created a FAT32 primary partition of 69xx MB and left the rest 1024 MB for the other unallocated space
4) Right click on the Unallocated Space to create an EXT3 as primary partition with the default cluster size.
5) At this point, it showed 2 partition on my SD, one with the drive letter for windows FAT32, and the 2nd one Ext 3 with 1GB and Primary. Clicked OK and Apply and wait for it to complete.
6) once complete , put it in phone, plugged usb and ran adb shell
7) ran a2sd --enable, it said reboot phone.. i made a mistake to reboot by adb the first time but then did the whole process again a 2nd time using reboot from the phone....
Tried logcat using this command "adb -d logcat>mylogfile.txt"
couldnt find the file anywhere ... if i dont redirect to the txt , it goes too fast to read and there's soo much debug messages what do i need to look for?
I thought it would save me time to get it done through windows... but its taking me as much time it w0uld probably get me with the manual way...
i'll give it a try tomorrow...
8) rebooted fine, and i was still low on space.. so went back in adb sheel to check a2sd --free but this is where it says not active..

QkSi1ver said:
1) Downloaded and installed Minitool Partition Wizard from your link. I got the free home edition
2) backed up my SD card and Open the program and delete my SD card partition ( which is in a card reader)
3) Created a FAT32 primary partition of 69xx MB and left the rest 1024 MB for the other unallocated space
4) Right click on the Unallocated Space to create an EXT3 as primary partition with the default cluster size.
5) At this point, it showed 2 partition on my SD, one with the drive letter for windows FAT32, and the 2nd one Ext 3 with 1GB and Primary. Clicked OK and Apply and wait for it to complete.
6) once complete , put it in phone, plugged usb and ran adb shell
7) ran a2sd --enable, it said reboot phone.. i made a mistake to reboot by adb the first time but then did the whole process again a 2nd time using reboot from the phone....
Tried logcat using this command "adb -d logcat>mylogfile.txt"
couldnt find the file anywhere ... if i dont redirect to the txt , it goes too fast to read and there's soo much debug messages what do i need to look for?
I thought it would save me time to get it done through windows... but its taking me as much time it w0uld probably get me with the manual way...
i'll give it a try tomorrow...
8) rebooted fine, and i was still low on space.. so went back in adb sheel to check a2sd --free but this is where it says not active..
Click to expand...
Click to collapse
Tbh I'm really not sure. One thing I forgot to mention in the guide is that you should assign a drive letter to the FAT32 partition or it won't show up in Windows. I didn't assign one to my EXT4 partition though, and DATA2SD is working great for me. Try deleting all partitions from the SD card and start again. It'll only take 10 minutes, and if it still doesn't work just use the manual way.
Sorry.

alexhtclegend said:
Tbh I'm really not sure. One thing I forgot to mention in the guide is that you should assign a drive letter to the FAT32 partition or it won't show up in Windows. I didn't assign one to my EXT4 partition though, and DATA2SD is working great for me. Try deleting all partitions from the SD card and start again. It'll only take 10 minutes, and if it still doesn't work just use the manual way.
Sorry.
Click to expand...
Click to collapse
Yeah i assigned a drive letter to FAT32...
Also the FAT32 , was my first block allocated partition, the 2nd partition was EXT3... i will redo the whole process and recreate EXT4 instead.
"DATA2SD is working great for me" ... you mean "A2SD working great for me" ... right? unless i'm missing something else that i needed to run..
ps: I recalled, after it was not working, i took out the sd and put it back in the reader to open MiniTool, it showed EXT2 instead of EXT3 ( which i was sure i chose )... and what's weird is it was reporting used space like 41MB... so obvisouly, the ROM wrote something on it...
Formatting it again to EXT3, didnt delete the 41 Used space, but it did convert it back to EXT3 ...probably nothing but mentioning as well

QkSi1ver said:
Yeah i assigned a drive letter to FAT32...
Also the FAT32 , was my first block allocated partition, the 2nd partition was EXT3... i will redo the whole process and recreate EXT4 instead.
"DATA2SD is working great for me" ... you mean "A2SD working great for me" ... right? unless i'm missing something else that i needed to run..
ps: I recalled, after it was not working, i took out the sd and put it back in the reader to open MiniTool, it showed EXT2 instead of EXT3 ( which i was sure i chose )... and what's weird is it was reporting used space like 41MB... so obvisouly, the ROM wrote something on it...
Formatting it again to EXT3, didnt delete the 41 Used space, but it did convert it back to EXT3 ...probably nothing but mentioning as well
Click to expand...
Click to collapse
I suggest you start over, something seems to have gone wrong.
A2SD is where the apps are stored on the EXT partition.
DC2SD is where the dalvik cache is also stored on the EXT partition.
DATA2SD is where the entire /data partition on the phone is stored on the EXT partition of the memory card.
Partitioning the SD card with a FAT32 partition and EXT partition is done first, then you decide which one is for you. DATA2SD does have one or two issues, such as the risk of corruption - you'd then have to completely reinstall the ROM. A2SD and DC2SD are fine but I still found myself running out of internal memory.

i gave up and used ROM Manager to create my partition ...i couldnt set it to 1G because 512MB is maximum but it was painless to create.
it asked me to create a swap partition... i've read somewhere that swap partition is useless or barely used in newer android os? do you guys have any swap partition if so how big are they?
Also, did you move Dalvik cache to sd? isnt it slower on SD? i mean shouldnt dalvik cache be on RAM whihc i assume is faster than any external sd?
thanks for your insight

QkSi1ver said:
i gave up and used ROM Manager to create my partition ...i couldnt set it to 1G because 512MB is maximum but it was painless to create.
it asked me to create a swap partition... i've read somewhere that swap partition is useless or barely used in newer android os? do you guys have any swap partition if so how big are they?
Also, did you move Dalvik cache to sd? isnt it slower on SD? i mean shouldnt dalvik cache be on RAM whihc i assume is faster than any external sd?
thanks for your insight
Click to expand...
Click to collapse
I used the full DATA2SD, which includes Dalvik2SD.

ok so sorry for a double post but im having an issue partitioning.
32 gb card san disk brand new
primary Fat32 10gb
primary Ext2 rest of space
once mini tool is done it sats successful but shows the sd card as Bad disk?!?
is there somthing im doin wrong? is used this guide here http://forum.xda-developers.com/wiki/SD_card_partitioning
all help deeply appriciated
Acer Iconia Tab A110 rooted, Cwm, 4.1.2

Can you actually have a 22gb ext partition? This might be something to look into to see if you can do it.
Edit: this got me interested so I searched myself, yes you can but apparently it depends on the chosen block size and hardware limitations, so u may have an issue with either.
Sent from my Legend using xda app-developers app

alexhtclegend said:
Firstly, BlaY0 has a great tutorial on how to do this properly, I suggest you do that to learn something.
Secondly, I cannot confirm that this is 100% safe. BlaY0's method should be 99% safe, I don't know about this as it is all automatic. BlaY0's method is tried and tested, this is not. I only used this method as I had a new SD card and I was in a hurry (exams coming up ) and I didn't have time to remind myself of BlaY0's method, and CWM only allows you to create up to 512mb partition. Also, I had a new computer, and I don't have time to set up ADB all over again.
Anyway, this is a method for people who don't want to use ADB to partition their SD card for A2EXT or DATA2EXT (a.k.a. apps2sd, etc etc), and are using Windows. If you're running linux, you could use something like gParted to partition it, not sure about OS X though. This method will allow a Windows user to create an EXT partition on their SD card alongside the FAT partition.
1) Download and install Minitool Partition Wizard, from here.
2) Open the program and delete all partitions from the SD card (which you will have inserted into the computer using an adapter or something). DO NOT DELETE THE PARTITIONS FROM THE HARD DISK! MAKE SURE YOU KNOW WHAT YOU'RE DELETING. Oh, and make sure the SD card is backed up
3) Create a FAT32 primary partition. You decide how big you want it, but I'd advise you leave 1024mb (1gb) for the EXT partition.
4) Create an EXT2/EXT3/EXT4 (you decide) primary partition. Use up the rest of the space on the SD card.
5) Click assign/OK/whatever and wait for it to complete
6) You now have your partitioned SD card ready for an A2SD ROM!
7) You need to assign a drive letter to the FAT32 partition. Not sure about the EXT partition. At first I forgot to do this and my card didn't show up in Windows, though Partition Magic can still see it.
Like I said, do yourself a favour and use BlaY0's method here, but if you're lazy or you don't have time or ADB doesn't work anymore, use this.
Click to expand...
Click to collapse
Hahah! Thanks for you detail guide. It is so helpful for me!

[Guide]How 2 Create EXT3 for the Salsa only! * Increased Internal Memory*

Ok seems many usrs here have the same problems over and over again. so heres a tut!
This will probably cover many other topics but simplified here as much as i can.
You Must have the following to get this to work:
ROOT
Recovery 5.0.2.6
busybox installed.
if you have non of these...do not attempt any of this thread till you have!
To start with.
Creation of EXT3 Partitions.
you will need Minitool Partition Wizard. Mini Tool Partition Wizard Download
This is a harddrive/diskspace program allowing accurate modification of disk space.
Never create an EXT3 in CWM, as this will create whats known as a swap drive.
this causes the bootloop. Hence the non boot!
EXT3 has to be set as primary drive not logical.
Size allowance recommendations (personal choice, but this is after a few findings and results given by Salsa users)
SD Card Size.................................EXT3 Size
2GB......(Class 2).............................250MB
4GB......(Class 2-4)..........................500MB
8GB......(Class4-6)...........................500MB-1GB
16GB....(Class8-10).........................1.2GB​
WARNING, anything over 1.5GB will result in serious problems and SD damage
This also works around class types of SD Card. the higher the class the faster it works, there are various brands offering different class cards, find a fast and big card for best performance. I currently use Class 8 16GB with 1GB Ext3 with little/no lag
Wise idea before this to make an SD backup, if done correctly your data will not be affected...if you screwed up...you'll loose everything...so back it up!
To start with,
Remove Sd Card and use and SD Reader and insert into your computer USB Slot.
Open Minitool Partition Wizard.
Resize your sd card accordingly leaving 1.2-1.5gb of unallocated space. Apply the actions.
Now you have the unallocated space, reformat the space in EXT3 and set as Primary drive. Apply Actions.
Now normally the Application throws your sd out and says bad drive......this is sometimes normal so don't panic.
Reinsert your Sd in Phone and boot into recovery only
Data2sd script
theres 2 scripts available for these roms.
htc-data2sd-ext3 or data2whatever by m1ndh8x4r.
2.1 Roms work well with htc-data2sd-ext3 script with no problems.
data2whatever works really well with 3.5 sense Roms (Bens/M1nds)
*****There is a warning with this data2whatever script....When using this script, you will notice after a short period, that you cannot update or install any more apks. This is due to a Dalvik error within the script on Deodexed roms, currently it cannot be fixed, you have been warned*****​
these can be used easily but the following rules must be applied.
You must flash the rom firstly by the 3 wipes...regardless!
flash the rom as normal and reboot full, letting the rom fully build it self and load up... ie input your details/sign in wifi etc.
check it out for a few mins while your waiting...hey even make a backup lol!
OK now reboot in recovery and flash the chosen script....DO NOT WIPE ANYTHING!
once flashed reboot normally.
it will boot, it may take up to 5-10mins but it will boot. if by any chance you a boot loop at the boot animation screen then you have an EXT3 fault and you must redo the EXT3 Partition in Minitool to proceed again.
data2sd scripts are here>
http://www.mediafire.com/download.php?duigp9ky9796b65 for htc-data2sd-ext3.zip
http://www.mediafire.com/download.php?m7bv6pk024p63ef for d2extv0.43.zip (New/Advanced)
http://www.mediafire.com/download.php?qr5rh2fho1hnbnl for data2whatever
This is a proven way and so many have tried and failed other ways.
Please try this guide. If you get stuck please just ask!
Please Answer my poll at the top and Thank this post...Ty!
If you Answer NO to this guide, please post below and tell me why so i may help further

Heyy it worked thanks man

BigBearEvo said:
Open Minitool Partition Wizard.
Resize your sd card accordingly leaving 1.2-1.5gb of unallocated space. Apply the actions.
Now you have the unallocated space, reformat the space in EXT3 and set as Primary drive.
Click to expand...
Click to collapse
Trying to do this with fdisk on linux
It works but runs slowly for some reason
I have a 2GB cards, first partition is about 1.4 for normal /sdcard the remaining .4GB for /data
Both partitions are start aligned on 2048 sectors

Issue - applications get corrupted after restart
I am facing strange issue. I did everything described above and have /data on sd. But everytime I reboot something happens to most apps. They are installed but when I try to launch any of them I got errors and application closes. I need to reinstall EVERY app and they work until next reboot. Any ideas about the cause or what to check ? At this point I am trying not to discharge or reboot my phone by it;s impossible to keep it that way.

procek said:
I am facing strange issue. I did everything described above and have /data on sd. But everytime I reboot something happens to most apps. They are installed but when I try to launch any of them I got errors and application closes. I need to reinstall EVERY app and they work until next reboot. Any ideas about the cause or what to check ? At this point I am trying not to discharge or reboot my phone by it;s impossible to keep it that way.
Click to expand...
Click to collapse
thats a rom issue.
What rom are you running?
Are you using a Data2sd script? if so which one?
Are you using links2sd?

BigBearEvo said:
thats a rom issue.
What rom are you running?
Are you using a Data2sd script? if so which one?
Are you using links2sd?
Click to expand...
Click to collapse
I am running standard HTC ROM 1.12.401.2 With Sense 2.1.
I used ext3 version of script.
No. Shall I ?

procek said:
I am running standard HTC ROM 1.12.401.2 With Sense 2.1.
I used ext3 version of script.
No. Shall I ?
Click to expand...
Click to collapse
no dont lol...ok sounds a bit stupid but have u got root? because what your describing is and apps2sd thing...which u cant get on stock rom....but if u dont have full root....then this sort of thing does happen....or...you got a faulty ext3 partition...
questions next...
which guide did u make ext3?
size and did u make swap?
root?
Need file name of the data2sd script u used and how u used it...(this is important)
so i need full break down....assuming u have root that is....this almost sounds like a silly problem, but then most of us don't use stock roms anymore....so we dont have this problem lol

BigBearEvo said:
no dont lol...ok sounds a bit stupid but have u got root? because what your describing is and apps2sd thing...which u cant get on stock rom....but if u dont have full root....then this sort of thing does happen....or...you got a faulty ext3 partition...
questions next...
which guide did u make ext3?
size and did u make swap?
root?
Need file name of the data2sd script u used and how u used it...(this is important)
so i need full break down....assuming u have root that is....this almost sounds like a silly problem, but then most of us don't use stock roms anymore....so we dont have this problem lol
Click to expand...
Click to collapse
Of course I have a root - it works perfectly. I created the partition according to above instructions (I mean this thread). My ext3 partition is about 800 MB and 3200 MB is for FAT32. I did not create swap - just fat32 and ext3 with Partition Wizard. I used htc-data2sd-ext3.zip in I think normal way - phone reset, installing busybox, reboot, installing script with recovery - done. Everything is perfect until next reboot.

procek said:
Of course I have a root - it works perfectly. I created the partition according to above instructions (I mean this thread). My ext3 partition is about 800 MB and 3200 MB is for FAT32. I did not create swap - just fat32 and ext3 with Partition Wizard. I used htc-data2sd-ext3.zip in I think normal way - phone reset, installing busybox, reboot, installing script with recovery - done. Everything is perfect until next reboot.
Click to expand...
Click to collapse
sounds like a problem with your rom my friend....hard to tell without seeing it really...
have you thought about changing the rom itself?

BigBearEvo said:
sounds like a problem with your rom my friend....hard to tell without seeing it really...
have you thought about changing the rom itself?
Click to expand...
Click to collapse
To this moment no. But if there's no other option I will probably have to...

procek said:
To this moment no. But if there's no other option I will probably have to...
Click to expand...
Click to collapse
either that or find your ruu and reinstall stock again!

Funny thing
I used my previous card (smaller - just 2 GB) and there's no such behaviour as with my 4GB. Smaller one is Sandisk, bigger one is Kingstone - both known for good products. So switching ROM is rather not an option. There's something about SD but I can not figure out what...

Pls help
I have created 6gb of fat32 and copied ROM and data2sd-ext3.zip then formatted remaining 1gb space in ext3. When I tried to install zip from recovery mode it throws "E: can't mount /sdcard/"
pls help
Thx

yuva0103 said:
I have created 6gb of fat32 and copied ROM and data2sd-ext3.zip then formatted remaining 1gb space in ext3. When I tried to install zip from recovery mode it throws "E: can't mount /sdcard/"
pls help
Thx
Click to expand...
Click to collapse
how did you make the partitions? and are they set as primary?
what class sd card is it? you need a class 8 or 10 on that size.

I used mini tool for partition. I set fat32 as logical and ext3 as primary. I have 8gb class 10 SD.
Sent from my HTC Salsa C510e using XDA

Shrink the ext3 to 750mb and set all partitions as primary.
BigBear is using Xparent Tapatalk Purple

Yep now I can see my data in SD card. Another problem I triple wiped and flash arc rom again, and given detail/sign in. When trying to flash script in recovery mode, it asks for busybox in some sys folder. I don't have busybox and also script installed, but ext3 memory not reflects in as main memory. Am I used different script or I need to install busybox, if so how to do that.?

I installed busybox @ system/xbin and flashed script, it worked. Finally my internal memory problem solved:thumbup:
I request to add installing busybox step and download link for script in tutorial.
Thx bb
Sent from my HTC Salsa C510e using XDA

I used data2sd without without any problem for past two days, suddenly today some apps force closing. Instagram app show error msg like"unfortunately this device's filesystem is reporting a problem." and pointing to this url "bit.ly/igfilesystem".
pls help.
I'm using arc V2 ROM, class 10 8gb sd, with 750mb of ext3.

yuva0103 said:
I used data2sd without without any problem for past two days, suddenly today some apps force closing. Instagram app show error msg like"unfortunately this device's filesystem is reporting a problem." and pointing to this url "bit.ly/igfilesystem".
pls help.
I'm using arc V2 ROM, class 10 8gb sd, with 750mb of ext3.
Click to expand...
Click to collapse
contact instagram with a logcat or report for them to check