Related
NOTE: my problem is not like the other two threads where usb mass storage dosent work...
I can successfully mount my sd card on my pc via the notification ITS just the problem of developing/debuging connections made between G1 and PC
Somebody please help me I have adp1 when I bought all was fine but recently, don't know why bubuging dosent work means all adb and fastboot commands don't work on my g1 I have tried re installing the drivers but they fail to install so it hangs at adb devices or saying waiting for device. Also I have tried installing ubuntu to do that but here too it says the same stuff waiting for devices
Even the usb debug mode is enabled....
I have also tried flashing rc29 then other jf versions but can't flash system images via fastboot even flashed HSPL again n now I am trying to flash system image via update.zip
Is it
"format SYSTEM"
"Write_raw_image system.img PACKAGE:SYSTEM" SOMETHING LIKE THIS found in JF update script what I have to include in update script ???
Please help...[/B]
I have the same problem, I can mount the sd card but now the G1 won't let me use adb or fastboot on two computers where it previously did : /
go into control panel and go to Device Manager and try uninstalling the usb mass storage device that corresponds with your device, then unplug and replug the usb to your phone and let it reinstall the drivers and see if that fixes it...
-BMFC
you can't write_raw_image:SYSTEM through and update, I've tried it before and it fails (I'm trying to determine why). I'd recommend flashing another rom (you can still use recovery, right?) and then trying. Try JF 1.51 since it's known good.
What did you do to the phone before loosing adb and fastboot.
Also, have you tried "adb root" and then "adb remount"?
sangeet.003 said:
NOTE: my problem is not like the other two threads where usb mass storage dosent work...
I can successfully mount my sd card on my pc via the notification ITS just the problem of developing/debuging connections made between G1 and PC
Somebody please help me I have adp1 when I bought all was fine but recently, don't know why bubuging dosent work means all adb and fastboot commands don't work on my g1 I have tried re installing the drivers but they fail to install so it hangs at adb devices or saying waiting for device. Also I have tried installing ubuntu to do that but here too it says the same stuff waiting for devices
Even the usb debug mode is enabled....
I have also tried flashing rc29 then other jf versions but can't flash system images via fastboot even flashed HSPL again n now I am trying to flash system image via update.zip
Is it
"format SYSTEM"
"Write_raw_image system.img PACKAGE:SYSTEM" SOMETHING LIKE THIS found in JF update script what I have to include in update script ???
Please help...[/B]
Click to expand...
Click to collapse
I had a problem with adb awhile back it was doing the same thing what I did was read the hell out of threads and I used this tool called USBDeview. I opened up the program and anything that had android or htc I uninstalled all the drivers, then I rebooted my cpu and plugged my phone into usb cord and it worked. Here's the link to the app http://www.softpedia.com/get/System/System-Info/USBDeview.shtml try it out its worth a shot
lol. Funny how you guys try and help him 6 months later.
Im sure he figured it out by now since he had no follow up for such a long time.
some ppl just dont read thats sad...u rght now they want 2 help..maybe they need help themselves
Some help is better then no help
try this
you should uninstall it and the reinstall it but this time pick chose from Pacific location or something like that and chose the htc adb interface device with the green icon i believe it is like the second one or something on it this is on xp computers i forgot what it looked like on my vista computer
I have two phones. ADB works on one but not the other. I device manager, HTC Android Phone USB device shows up for both but ADB interface only appears for one phone but not the other.
What gives?
maybe u should try the steps again------->>> http://forum.xda-developers.com/showthread.php?t=532719
This about as short as I could make it:
I haven't tried to use ADB with my G1 for about a month, so I'm not exactly sure when the problem started, but it's become a royal headache now. For whatever reason when I launched ADB shell today, I got an error saying 'device not found'. The first thing I did was check device manager where I noticed the phone showed as a 'USB composite device' with a yellow exclamation mark over it. I thought to myself "drivers." So I tried pointing it to the driver in the Android SDK folder. That just popped an error saying that Windows couldn't find a better driver match than the one I was already using.
From there I got the googling and came across this insanely long Google Groups thread. Following the advice listed, I started pulling some USB .sys files. I tried using an older copy of the USB driver from a previous SDK. I tried using Haruyko's modified USB driver. None would install.
Same error.
Reading down some more I saw that some people had success with with usinfg HTC Sync. It was worth a shot, right? Well it certainly made things different, but doesn't resolve the issue. Now in device manager I have an 'HTC Remote NDIS' listing under Network Connections. The old 'USB Composite Device' item is now gone. But still, I can't use ADB. "Device not found."
It's driving me nuts.
At this point I figured that it'd be best to try this on a different PC. Maybe my primary one is wonking out. These things happen. Well, that hope was quickly crushed when I discovered that NOT EVEN on a VANILLA XP SP3 setup, will Windows detect the G1. I downloaded a fresh copy of the SDK, plugged it in, pointed it to the USB driver....and nothing. Same error as PC number one:
"Windows can't find a better version of the driver than you're currently using."
Tried switching the USB cable. Same thing.
Back to PC number one, I removed all HTC software from 'Add/Remove Programs, then ran USBDeview. There, I removed the HTC NDIS device, unplugged the G1, and plugged it back in.
The HTC NDIS Remote device returned. **** my life.
SO.....before I throw this phone into traffic, does anyone have any clue as to what's going on here? All I want to be able to do is regain ADB access to my phone. I don't care about USB tethering (and toggling that option does nothing btw) or none of that. Just looking to regain ADB access. The only thing that's changed since the last time I used ADB is the version of Cyanogen's mod. I'm currently using v4.2.3.1. Maybe this broke shell access?
Thoughts?
**EDIT***
-Toggling USB debugging does nothing either.
-Ditto that for Fastboot
device not found has to do with the phone....make sure your cable is not messed up.
B-man007 said:
device not found has to do with the phone....make sure your cable is not messed up.
Click to expand...
Click to collapse
Tried switching the USB cable. Same thing.
Click to expand...
Click to collapse
Tried that already.
the.snks said:
Tried that already.
Click to expand...
Click to collapse
is the phones usb port ok? can you transfer files over it? if your about to throw the phone away....at least try flashing the RC29 image again
B-man007 said:
is the phones usb port ok? can you transfer files over it? if your about to throw the phone away....at least try flashing the RC29 image again
Click to expand...
Click to collapse
As far as I know the USB port is ok. It charges fine. And to update everyone on where I am, I tried the following today:
-Removed all HTC software (Sync and Drivers).
-Used USBDeview to remove all instances of HTC, and Android devices.
-Tried downgrading my test machine (PC #2) to Service Pack 2.
-Tried a third USB cable.
And I'm still getting the same problem. So there's no doubt in my mind that it has to be the phone. Like I said, the only thing I've done lately is update the version of Cyanogen's ROM.
I know it definitely worked before I updated to v4.2.3.1. Also I noticed that I am no longer able to mount the sdcard as storage in Windows. I do not get a prompt on the G1 asking if I wish to mount it. However, the USB debugging notice still pops up (weird).
....and here I'm stuck once again.
Have you tried actually uninstalling the usb devices in device manager?
I was having a similar problem, I just unistalled all the usb instances in the device manager, and when I rebooted my computer, everything seemed to work fine.
rp1783 said:
Have you tried actually uninstalling the usb devices in device manager?
I was having a similar problem, I just unistalled all the usb instances in the device manager, and when I rebooted my computer, everything seemed to work fine.
Click to expand...
Click to collapse
Yes. Multiple times in fact. It can't be the computer if the same issue is happening across two different PC's, with three different USB cables.
At first I thought this was a definite driver issue with xp, I've had similar problems in the past that just won't go away.. xp is a c*nt when it gets a driver stuck in its head that it just doesn't want to part with... but if its persisting across several machines it could well be the phone..
Have you tried adb with the phone in recovery? Boot into recovery and leave it about 30 seconds, then plug in the usb and try to get an adb shell.. this should rule out any rom config issues
goldenarmZ said:
At first I thought this was a definite driver issue with xp, I've had similar problems in the past that just won't go away.. xp is a c*nt when it gets a driver stick in its head that it just doesn't want to part with... but if its persisting across several machines it could well be the phone..
Have you tried adb with the phone in recovery? Boot into recovery and leave it about 30 seconds, then plug in the usb and try to get an adb shell.. this should rule out any rom config issues
Click to expand...
Click to collapse
PROGRESS! I booted into recovery mode and plugged the G1 into the computer. I got the 'new hardware' prompt and was asked to install the driver. I did so using the one from the SDK. Now I have ADB access, and Windows tried to mount the sdcard but that failed. I'm guessing because there's no way for me to 'ok' that in the recovery console.
So what does this tell us? I'm not sure if I understand what's wrong here.
(Sidenote: Man I'm so tempted to try to install the new Google Maps now....)
the.snks said:
So what does this tell us? I'm not sure if I understand what's wrong here.
Click to expand...
Click to collapse
It tells us that something's cocked up with the usb support in your rom, but the phone itself is fine. wipe/reflash and you should be good to go.
There is a command you can type to mount the sd for windows when you're in recovery.. just type this in the console:
Code:
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
goldenarmZ said:
It tells us that something's cocked up with the usb support in your rom, but the phone itself is fine. wipe/reflash and you should be good to go.
There is a command you can type to mount the sd as storage when you're in recovery.. just type this in the console:
Code:
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
Click to expand...
Click to collapse
Ah....that blows but you do what you gotta. I'll try wiping and report back in case this thread helps anyone else.
Thanks man.
Alright, here's what I did to get working again:
Doing a wipe did NOT resolve the issue. However, updating to v4.2.4 did (remember I was using v4.2.3.1 originally). For clarity, I wiped both before and after the update. And I had to use a sdcard reader to get v4.2.4 onto the phone. I can now ADB and mount the sdcard in Windows without issue. I'm not sure if this was a one off, or possibly a bug in v4.2.3.
Somebody may want to bounce that Cyanogen.
B-man007 and goldenarmZ, the help was much appreciated.
This probably is related to USB tethering Cyan put in his rom.
Also for future reference, if you want to mount your SD card in recovery and you have Cyan 1.3 or greater or RA recovery, you can just type
ums_enable
to mount and
ums_disable
to dismount
saves you from typing that hideously long line lol
Okay I don't know if this will help anyone, but I figured out how to stop Windows from detecting the phone as two USB drives when the phone goes into Recovery mode, and to make it show up as Android Composite ADB device.
I do NOT have HTC installed, rather, I'm using the USB 3 drivers that come down through the SDK, so I'm not sure how to do this if you are using the HTC Sync drivers intead.
At any rate, start with the phone off and disconnected. Open the Device Manager. Boot with your prefered method into Recovery mode, then connect the phone. It should detect as USB Mass Storage Device under Universal Serial Bus Controllers. Right click on USB Mass Storage Device and click Uninstall and then OK. Once this is done, disconnect the phone (you can leave it running in Recovery).
Open My Computer and navigate to C:\Windows\inf. Copy the files usbstor.inf and usbstor.pnf to your desktop or wherever, it doesn't matter, just make sure you put them somewhere you can get them later. Then delete them from the C:\Windows\inf folder. These are the drivers that Windows automatically uses for USB storage devices.
Ok, now bring Device Manager back to the foreground and plug the phone back in in Recovery. It should show up as Android Phone with an exclamation mark. If Device Wizard pops up cancel out of it. Now right click on the Android Phone and click update driver. Click Browse my computer for driver software. Click Let me pick from a list... Click Android Phone and Next. Click Have Disk. Browse to your SDK folder into the USB Drivers folder and you should see android_winusb.inf, select that then click OK. You should now have a list of three items to select, this part I am not sure if there is a 'right' or a 'wrong' but I go with Android Composite ADB Interface.
Select that or whichever one you think and this is what it will install as. Bingo, now whenever you connect the phone into Recovery or boot into Recovery with it already connect it correctly detects as the Composite ADB Interface or whichever you selected, but does NOT show up as any USB drives.
Unfortunately... I still could not get ADB Shell to connect (I even went out and bought a 2GB PNY card).... so I don't know if this will help any of you but I figure it's one step closer to what we need to happen.
At any rate, to get everything back to normal as far as your computer being able to use USB storage devices just copy those two files back to the inf folder before you connect them and you should be fine.
bast525 said:
Unfortunately... I still could not get ADB Shell to connect (I even went out and bought a 2GB PNY card).... so I don't know if this will help any of you but I figure it's one step closer to what we need to happen.
.
Click to expand...
Click to collapse
Format it LONG Fat32, 1024k allocation, name it TEST, put PB31IMG.zip (downgrade ROM) on it, power on into bootloader holding volume down until you get to volume up to start upgrade, run the downgrade from Bootloader, then immediately reboot with holding the track button switch into Fastboot menu, power to Bootloader, let the card check run, decline upgrade this time, run your loop.bat or loop.sh if you like linux, power the phone into recovery boot, and prepare yourself to be happy--I think that will work. The whole trick is get a card/format that forces recovery into an ADB-available mode.
Or you could try what I've done 7 times and achieved ADB Shell 7 times...
1. Turn the phone off.
2. Start running Loop.bat
3. Unplug USB cable.
4. Turn device on in Fastboot by holding in the optical joystick and power.
5. Plug USB in.
6. Hit power button once to get to HBOOT.
7. Wait two seconds for it to do it's thing.
8. Pull off the back of the phone.
9. Hit Vol - to Recovery then hit power.
10. Immediately after doing this continuously push the sd card in and out (about every .5 - .75 seconds)
11. ?????
12. Profit
@DigitalDementia--
How is what you said relevant in this thread?
bast525 said:
Unfortunately... I still could not get ADB Shell to connect (I even went out and bought a 2GB PNY card).... so I don't know if this will help any of you but I figure it's one step closer to what we need to happen.
Click to expand...
Click to collapse
drtrmiller said:
@DigitalDementia--
How is what you said relevant in this thread?
Click to expand...
Click to collapse
Pretty positive it had everything to do with that section of the first post, he said he still couldn't achieve root I attempted to help him. Why don't you explain to me exactly what it doesn't have to do with this thread?
rynosaur said:
Format it LONG Fat32, 1024k allocation, name it TEST, put PB31IMG.zip (downgrade ROM) on it, power on into bootloader holding volume down until you get to volume up to start upgrade, run the downgrade from Bootloader, then immediately reboot with holding the track button switch into Fastboot menu, power to Bootloader, let the card check run, decline upgrade this time, run your loop.bat or loop.sh if you like linux, power the phone into recovery boot, and prepare yourself to be happy--I think that will work. The whole trick is get a card/format that forces recovery into an ADB-available mode.
Click to expand...
Click to collapse
The real bummer here - and I should have known better, really - is that this wipes your phone.
I suppose it should be obvious, but take it from someone who's pretty new to Android phones and just wiped their entire phone after following your steps: Please add a warning to your original post.
It's late, I'm tired and irritated, but I'm sort of bummed to know I went from hero to zero in trying to enter shell (again) during recovery all in an effort to get proper perm. root. Sort of ****ty to know that I just lost everything.
still no root
I'm sorry, I shouldn't have assumed people knew an IMG flash from bootloader wipes user data. Believe me, that's not the only time you'll wipe if you keep modding
-------------------------------------Sent via the XDA Tapatalk App
USB drives are ok in recovery
When I am in recovery with adb and working correctly it still shows the 2 USB drives so this is normal and ok, what you have done is fool yourself into thinking that your phone is in correct mode but it really is not, this is why it still does not work, sorry.
rynosaur said:
I'm sorry, I shouldn't have assumed people knew an IMG flash from bootloader wipes user data. Believe me, that's not the only time you'll wipe if you keep modding
-------------------------------------Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Now that I've scorched the earth, I'm hitting this thing hard with every trick I can think of to get the shell in recovery again.
Thankfully, I at least have my app list on appbrain.
After researching around the different forums, I think this maybe my issue. I will have to make this attempt when I get home.
This is what I posted on a different forum. I am not sure if this is a similar experience you were having:
So, for a little a bit I was having issues with finding and modding the usb.inf file. I got that finally resolved... Now as I go to one of the first parts of the procedure, executing the adb shell command. Well at first it said the 2 lines, about the daemon and whatever the second line was. Anyways, the third line did not say "no device found" it went straight to a shell prompt "$" . The instructions made a point in the instructions for it to say " no device found" .
I went ahead with the rest of the instructions. No Luck. And I did both methods. A co-worker of mine told to run adb devices to see if my phone is recognized. I will also make that attempt tonight.
I wanted to know if any of you had some insight. I made sure I was in the right directory.
I will make another attempt on a different machine tonight.
Thanks. Oh yeah, I do have some UNIX experience if that makes a difference.
I had the same problem, used this method here
addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
Click to expand...
Click to collapse
Seemed to help me with the dumb usb mass storage devices whilst in recovery
I don't know how I missed this thread earlier though, It had been a problem for me for days!
kentoe said:
I had the same problem, used this method here
Seemed to help me with the dumb usb mass storage devices whilst in recovery
I don't know how I missed this thread earlier though, It had been a problem for me for days!
Click to expand...
Click to collapse
I rooted in Windows, rather than linux, simply because I like the look of MejDam's procedure better than the linux script posted here on XDA--and his windows procedure is accompanied by his YouTube video
Long story short: I had ADB Composite Device AND the two storage volumes mounted together, as I got shell, and did the other steps in recovery. NB: they were mounted as Generic Storage Volumes, not writeable partitions. The stock recovery on DI does not allow host to mount either partions, although I'd like to see if
Code:
mount /dev/block/mmcblk0p1
worked for the SDcard on the sdcard, cuz then it would be a cinch to mount sdcard/emnc partition into host OS--windows, linux, Atari 2600, etc Worth a try.
Anyhow, my conclusion: a bad driver setup could be a barrier to catching adb shell, but it is certain not the prevailing problem for most, IMHO.
Was wondering if bast525(the creator of the thread) was ever able to adb shell while in recovery, and if so what did you do thanks.
Heh, I wish.... I've tried just about every method posted on these forums, and five different SD cards from Sandisk, PNY, and Kingston. The only thing I haven't tried is rolling back to the pre OTA update, because I don't want to wipe the phone at this point.
I just loaded a new version of CM 10.1 on my sdcard ready to flash. I rebooted in TWRP, did the necessary wipes, then went to install my new ROM. Surprise, using Safari on Mac, it automatically opened the downloaded .zip file to a folder I didn't realize this as I was transferring, so now I have the extracted folder for my ROM, but the system can apparently only read .zips. So I am now without an OS. And no, I don't have a backup on the card. I just transferred it to my Hard Drive a few days ago to save on storage. But now I am VERY clear why it should stay on the card. Stupid.
I noticed that TWRP has a USB mount feature so I could copy over the proper .zip. But it won't mount on my computer (Mac or PC). In the console I see "E:Unable to locate volume information for USB storage mode." I tried getting into it via ADB, which worked before, but now it does not even list my device. Tried ADB side load, and it just never starts up on the Kindle.
I could never get fastboot to detect the device in the first place, so I haven't even bothered with any of that.
What can I do? All I want is to get my .zip back on the kindle. Or is there a way to .zip the extracted folder back into a .zip on the kindle itself with command line? Is there a way to install folders instead of .zips?
I've scoured several similar posts but nothing seemed to be resolved, or their fixes depending on ADB working.
Please help!
There isn't a way to re-zip a directory within Android in such a way that it can be flashed in recovery. You'll need to sort out your driver issue in Windows, or use the Mac (better choice anyway) to 'adb push' a new ROM to your sdcard.
Did you happen to wipe your internal storage before this happened?
soupmagnet said:
There isn't a way to re-zip a directory within Android in such a way that it can be flashed in recovery. You'll need to sort out your driver issue in Windows, or use the Mac (better choice anyway) to 'adb push' a new ROM to your sdcard.
Did you happen to wipe your internal storage before this happened?
Click to expand...
Click to collapse
When I did my wipe, I just followed the same instructions as when I did my original flash. Wiped system first, and then did the Factory Reset which includes data, cache and dalvik.
I tried plugging in the Kindle to my Mac while TWRP had the USB mounted, but nothing. I was just using the Android File Transfer for Mac that Amazon originally recommended when I first got it. That does not recognize anything now. Is there another way to access a Kindle on a Mac? Can you get Android SDK and run from a Mac Console command line? I thought all the commands were only for Windows. Does the Mac work better?
For my PC, I had the ADB drivers working fine before this. When I plug in now, I hear the windows SFX and it shows up in device manager as "Other Device" but listed as a Kindle. But the driver doesn't work, and it can't find drivers when I search. The Kindle used to show up as its own device with Android ADB under it. That never shows up anymore, probably why I can't do ADB commands.
But I think the computer is fine, because when I try to reinstall those drivers, it says they are already there. I'm guessing the Kindle itself is not allowing it to be recognized because there is no way to "enable ADB" in its settings since the OS is gone. I was hoping TWRP would have this built in.
I'm not sure why ADB Sideload doesn't work. It just sits there forever trying to start. I wish I could just push a new .zip that way. It's driving me nuts trying to figure out why nothing ADB works after the wipe.
Thanks
I downloaded the SDK for Mac and ran the ADB commands through Mac Terminal — it recognized the device! I never would have thought to try the Mac. Not sure why it worked differently, but it did. I was able to push a new ROM .zip through ADB and all is well.
Still not sure why I couldn't get the TWRP USB mount to work, but I learned my lesson, always keep a backup ON-CARD.
Thank you!
jhonny0099 said:
I downloaded the SDK for Mac and ran the ADB commands through Mac Terminal — it recognized the device! I never would have thought to try the Mac. Not sure why it worked differently, but it did. I was able to push a new ROM .zip through ADB and all is well.
Still not sure why I couldn't get the TWRP USB mount to work, but I learned my lesson, always keep a backup ON-CARD.
Thank you!
Click to expand...
Click to collapse
I assumed you already tried it on the Mac. But yeah....Mac is waaaaaay better at detecting the Kindle Fire than Windows.
Hey guys,
First of all I'd like to apoligize for my english skills and a thread if I've posted in a wrong one category.
However, I have REALLY serious problem right now and I'll try to explain. Today I decided to reset my phone (settings - back up & reset). This didin't help me as I was expected therefore I wiped out all the data by using TWRP(yes, I'm a noob). Thought that it will erase everything but the ROM. I tried to do a reboot and the phone did the htc quietly brilliant logo but got caught at the beats audio logo screen and never advanced.
Went into recovery and tried to do a factory reset, and a whole bunch of other things (tried to reboot system, but is says that no os installed). The phone still gets stuck at the same screen. Also, I am unable to get it to be accessible on my computer again. it says that installing new device but nothing happens, so I have no way how to get into sdcard and mount a new ROM or something. Is there any way how to fix it?? How to install a new ROM when USB not working and there's no way to take off SD card.....?
Nelayme said:
How to install a new ROM when USB not working and there's no way to take off SD card.....?
Click to expand...
Click to collapse
TWRP has an option to enable adb sideload. Then you can adb push rom.zip
BenPope said:
TWRP has an option to enable adb sideload. Then you can adb push rom.zip
Click to expand...
Click to collapse
Nothing happens, actually. All I can see is " Usage: adb sideload filename.zip, Updating partition details... Starting ADB sideload feature" and that's it. Waited for 5 min and still nothing..
Nelayme said:
Nothing happens, actually. All I can see is " Usage: adb sideload filename.zip, Updating partition details... Starting ADB sideload feature" and that's it. Waited for 5 min and still nothing..
Click to expand...
Click to collapse
You go into TWRP and enable sideload mode, it will do nothing but say sideload is being started. Then copy whatever ROM you want into the same folder as fastboot and adb. Open up a new command window and type "adb sideload rom.zip", obviously name your ROM "rom.zip" and click enter ... In the command window you should see a percentage figure start to increase as it pushes it to your phone. When it's completed just flash the ROM like normal in TWRP.
AllAboutTheCore said:
You go into TWRP and enable sideload mode, it will do nothing but say sideload is being started. Then copy whatever ROM you want into the same folder as fastboot and adb. Open up a new command window and type "adb sideload rom.zip", obviously name your ROM "rom.zip" and click enter ... In the command window you should see a percentage figure start to increase as it pushes it to your phone. When it's completed just flash the ROM like normal in TWRP.
Click to expand...
Click to collapse
I tried doing that myself but never got a percentage showing me anything I freaked out at first ten I just like it do it's thing until it said it transferred
Sent from inside the T.A.R.D.I.S
joselv456 said:
I tried doing that myself but never got a percentage showing me anything I freaked out at first ten I just like it do it's thing until it said it transferred
Sent from inside the T.A.R.D.I.S
Click to expand...
Click to collapse
Another option is to just use an OTG cable and flash a ROM from a flash drive.
AllAboutTheCore said:
You go into TWRP and enable sideload mode, it will do nothing but say sideload is being started. Then copy whatever ROM you want into the same folder as fastboot and adb. Open up a new command window and type "adb sideload rom.zip", obviously name your ROM "rom.zip" and click enter ... In the command window you should see a percentage figure start to increase as it pushes it to your phone. When it's completed just flash the ROM like normal in TWRP.
Click to expand...
Click to collapse
Just tried what you said and still nothing. There're somekinda problems with USB, I'm even unable to connect my phone.. When I typed "adb sideload rom.zip" it was saying "error: device not found" only. Will try to reinstall htc sync drivers, but I think it won't help.. Any other ideas how to back my htc to life (didin't try with OTG cable yet)?
Nelayme said:
Just tried what you said and still nothing. There're somekinda problems with USB, I'm even unable to connect my phone.. When I typed "adb sideload rom.zip" it was saying "error: device not found" only. Will try to reinstall htc sync drivers, but I think it won't help.. Any other ideas how to back my htc to life (didin't try with OTG cable yet)?
Click to expand...
Click to collapse
OTG cable should work and is the easiest way to do it but if not you might want to check this thread .. http://forum.xda-developers.com/showthread.php?t=2363516
See this post, might help
http://forum.xda-developers.com/showpost.php?p=44730345&postcount=13
AllAboutTheCore said:
OTG cable should work and is the easiest way to do it but if not you might want to check this thread .. http://forum.xda-developers.com/showthread.php?t=2363516
Click to expand...
Click to collapse
Hey mate,
I just got OTG cable, moved a new Rom into USB stick and tried to mount on TWRP. All I got was "E: Unable to mount '/usb-otg'. Maybe I've missed couple of steps before?
FIXED: All I had to do is to format an USB stick in FAT32. Everything went well and now I can use my phone once again. Thanks a lot for your help, hope it will help to others as well.
Cheers!