Related
Hello friend
My SGS giving me weird problem the phone does not detect any usb mode (kies,MTP,Mass storage even debugging mode).
when i connect the usb its show nothing but only charging
anybody know any solution
khan_frd2002 said:
Hello friend
My SGS giving me weird problem the phone does not detect any usb mode (kies,MTP,Mass storage even debugging mode).
when i connect the usb its show nothing but only charging
anybody know any solution
Click to expand...
Click to collapse
could be due to USB cable damaged internally or try options in My Android Solutions link below
Or try to install latest USB Samsung drivers on your PC.
Sent from my GT-I9000 using Tapatalk 2
Hi!Help me! Is myOB dead?How to fix this??? You can see problem on the youtube video -- http://youtu.be/F4HCOqoeaC4
THANK U!!!
Install LG drivers and try! Will work
Hi Emil, first check some simple steps. Be sure that you have the latest driver and the cable is not broken.
Remove battery and before connect the OB whait a minute. Try to connect to the USB port behind your PC not in the frontal port (If you have a desktop PC).
If you’re no longer able to activate in download mode try reconnect your battery and make a forced restart by pressing VOL-UP+SWICTH ON, then retry to reconnect in downloade mode (VOL-DOWN+cable connect)
I hope you’ll resolve…good luck!
suleymanovemil8 said:
Hi!Help me! Is myOB dead?How to fix this??? You can see problem on the youtube video -- http://youtu.be/F4HCOqoeaC4
THANK U!!!
Click to expand...
Click to collapse
Service Center is the only option left. If Emergency Recovery doesn't work.
hello everybody. i have got a problem conecting my phone to pc. i am on cm 10.1 . when i conect my phone to pc it only charge. i download again the drivers but nothing happen. i try to an other laptop ...the same. try different cables the same.. reflash rom with all wipes, nothing. i am on cm kernel.. is it hardware problem of micro usb port?? any ideas will be welcome. thank you
andreasarxon said:
hello everybody. i have got a problem conecting my phone to pc. i am on cm 10.1 . when i conect my phone to pc it only charge. i download again the drivers but nothing happen. i try to an other laptop ...the same. try different cables the same.. reflash rom with all wipes, nothing. i am on cm kernel.. is it hardware problem of micro usb port?? any ideas will be welcome. thank you
Click to expand...
Click to collapse
1. Kill yourself! Wrong section
2. Other micro usb cable
3. Reinstall drivers http://is.gd/G6P4Ej
TheNoticer said:
1. Kill yourself! Wrong section
2. Other micro usb cable
3. Reinstall drivers http://is.gd/G6P4Ej
Click to expand...
Click to collapse
i have tryied your 2nd and 3rd solution but nothing.. maybe i should try 1st!!
Did you tried to go into settings/memory/menu(or something like that-I don't remember anymore) and turn on usb storage?
...from SG NOTE N7000 with Tapatalk 2
andreasarxon said:
i have tryied your 2nd and 3rd solution but nothing.. maybe i should try 1st!!
Click to expand...
Click to collapse
please dont life is to precious
In settings somewhere you might have to enable usb mode
Settings > Developer Options > USB Debugging.
aurator said:
Settings > Developer Options > USB Debugging.
Click to expand...
Click to collapse
that should be turned off...
no I mean other setting, like mtp mode or something alike
baz77 said:
that should be turned off...
no I mean other setting, like mtp mode or something alike
Click to expand...
Click to collapse
it should be in settings>storage then hit options and change to mass storage
best let him look, hell discover a ton of other stuff
Hello everyone,
Yesterday I installed CM13 and it is very good. I haven't found any problem as of now in my phone but I am getting BSOD everytime when I connect the mobile to my PC through USB. I tried everything from changing the cord to changing the usb port, even uninstalled LG drivers but still getting BSOD.
Can anyone help me to understand and solve this. Right now my only option is to take SD card out and connect it using Card Reader. Phone is working smoothly. No issues so far. Its just this problem is bugging me. Appreciate if you guys can help me out. Thank You.
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
kernel.debugger said:
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
Click to expand...
Click to collapse
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Hyoretsu said:
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Click to expand...
Click to collapse
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
kernel.debugger said:
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
Click to expand...
Click to collapse
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Hyoretsu said:
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Click to expand...
Click to collapse
Yes, Never bricked the device Thanks to XDA members who are always there to help novice like me from every situation. Thank You.
Someone post answer in cm13 thread - some issues with drivers from LG with cm roms compilations or something like that. Just UNINSTAL driver from PC and u good to go connect l90 via MTP
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
uns8816 said:
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
Click to expand...
Click to collapse
so with these drivers no BSOD when u put phone via mtp connection ?
EDIT: i test this so with drivers 4.0.4 there IS NO BSOD in Windows 7
hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
bakhiem91 said:
hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
Click to expand...
Click to collapse
Does the USB Connection type notification appear in the status bar?
ya7hu said:
Does the USB Connection type notification appear in the status bar?
Click to expand...
Click to collapse
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
bakhiem91 said:
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
Click to expand...
Click to collapse
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
I have this same issue using LOS 15.1. The solution is to go into Developer Settings and enable MTP using the 'Select USB Configuration' option. Then when you plug in via cable you will get the notification as normal. The problem is you have to do this every reboot, otherwise it's the same situation all over again. No Notification on plugging in and no way for your PC to see the device as it defaults to Charging mode.
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
przemcio510 said:
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
Click to expand...
Click to collapse
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
ya7hu said:
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
Click to expand...
Click to collapse
DirkGently said:
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
Click to expand...
Click to collapse
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
bakhiem91 said:
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
Click to expand...
Click to collapse
I spoke too soon about USB Debugging working. It doesn't help across reboots. Gonna Clean Install now. Hope you find a fix.
Clean install didn't help me. Just Google 'Oreo no mtp' to see how common this is.
I have a Nexus 5X on Oreo that doesn't have this problem. Other N5X owners do have it. It's totally random.
Good news everyone...
A fix is coming:
https://review.lineageos.org/#/c/209834/
At least for LOS 15.1 and any other ROMs based upon it.
@bakhiem91