Database Develop

Pdair car mount for leather case or the arm one from ebay???

Hi all, after some advice re a car mount for my wonderful little gadget. I have a pdair leather case and as I use my phone a bit in my car (tomtom and some calls and even listening to podcasts etc) I am going to get a car mount and want opinions on the pdair mount http://www.amazon.co.uk/PDair-Sucti...2?ie=UTF8&s=electronics&qid=1267533319&sr=8-2 or the "arm type" mount http://cgi.ebay.co.uk/WINDSCREEN-SU...ries_MobilePhoneBatteries?hash=item5190b13e3c (or something along that line)... any help/advice would be appreciated...
FEI I am leaning more to the pdair version as I wont have to keep taking my phone out of the case and then puting it back in... but the arm type would prob be sturdier... decisions decisions...

I can only comment on the second item - as that is what I bought (along with a PDAir pouch for the HD2).
It holds well onto the windscreen and is reasonably solid. The unit doesn't really need the retaining clip at the top of the phone (unless you are doing some serious off-roading).
The only problem I have found is the length the holder is away from the windscreen. With most cars now coming with very sloping windscreens and the size of the HD2, you may find it very awkward to install and remove the HD2 from the holder (not a problem if you are fitting it portrait ways). My first attempt was to tilt the holder so that the top of the phone was closer to me than the bottom of the phone. Since I prefer to look at the phone without this incline, I used an old Adhesive plate (that came with my old car holder kit for a HTC Diamond), mounted that on the dashboard and attached the car kit to that.
I bought from this ebay seller and it doesn't come with a charger, yet you can buy the same item for the same price on ebay that do include a charger.

Thanks for the info Fred... I ordered one and will see how it works out... the dashboard trick sounds right along the lines I was thinking...

I need a car holder that doesn't block the HD2's camera lens

Can anyone recommend a windscreen mount that would meet my following requirements?
1. Must hold the HD2 securely (goes without saying) - but doesn't have to be specifically designed for the HD2
2. Under or around £10 (can't afford those £40-£60 'official' things!)
3. Must not block camera lens as I wish to record some of my journeys
4. Can swivel portrait/landscape without removing
I have found a fair view that 'might' meet these requirements but I'd like to know for sure.
- http://cgi.ebay.co.uk/AIO-PREMIUM-C...ries_MobilePhoneBatteries?hash=item2304e852d0 <--- this looks decent but I can't work out whether it blocks the lens or not??
- http://www.dealextreme.com/details.dx/sku.1154
(some more but I've lost the urls - loads on DX to choose from)
Any help's much appreciated!

Hi, I bought this one on eBay:
WINDSCREEN SUCTION CAR HOLDER & CHARGER FOR HTC HD2 LEO, the company is "e-Cell"
It arrived yesterday and it works the way you want it to - there is a hole for the camera lens, but not for the LEDs, and it swivels all the way round.
It costs £7.85, with free P & P, and includes a cigarette lighter power supply (which I haven't used yet).
I hope this helps.
EDIT: I checked and the item is no longer listed - perhaps they're out of stock.

Thanks John, I managed to find the one you're referring to via Google but as you say it's sold out: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200433261802
It looks very similar to the ones being sold by DX for other devices (currently none on DX for HD2), e.g.
http://www.dealextreme.com/details.dx/sku.18225
http://www.dealextreme.com/details.dx/sku.22814
It looks decent - how easy is it to put your HD2 into and remove it from the holder?
I've also found this super cheap universal one on DX: http://www.dealextreme.com/details.dx/sku.23565
...which allows full swiveling and most likely the top of the HD2 (camera, flash) would stick out from the holder making it accessible for filming. I may order this one as I can always give it to a friend if it doesn't work out, though I'm def still interested in more stuff like your link.
Cheers

The Capdase Car Mount will work.

Try E-CELL on E-bay. I bought mine there, it is a veryy good holder for the HD2 and cost app. 8 pounds.

Search ebay for this "Holder Mount USB Car Charger For HTC Touch HD2 Leo 100". Has opening for camera and holds phone in landscape which is good for copilot.

Hi,
This is for the e-Cell model:
If you imagine the phone in the landscape position, with the five buttons to the right, the phone slots into two grips left and right, at the bottom. These are fixed and don't move, but at the top, in the centre of the phone holder is another clip that flexes to allow the insertion and removal of the phone. This piece of plastic then clips onto a standard flexible arm windscreen mount, which in turn fixes to the windscreen with a suction cup. There is a ball joint on the back of the phone clip, which, when you've found your best position, can be tightened to lock the mount so that it will not move.
I've only used mine a couple of times and it's relatively easy to put in and remove the phone, perhaps a bit stiff at first, and I've found it easier to fit the phone into the holder first and then attach the complete assembly to the windscreen. It seems to work OK, so it may be worth waiting for e-Cell to get new stock, particularly as you also get a cigarette lighter charger, and it's only £7.85 with free postage.

This looks similar to the e-Cell model:
http://www.mobilefun.co.uk/car-pack-for-the-htc-hd2-p23420.htm but they're sold out too! The joint on this looks more sophisticated, but it's more than twice as expensive. There seems to be a hole for the lens, but the picture isn't very clear.

http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=280435698894&ssPageName=STRK:MEWNX:IT
mine, cheapest and camera effective, even if I'd prefer a joint-like arm instead of the one it's got

Hi Ephestione,
It's a pity we can't combine the best features of all the mounts. For instance, mine doesn't have the cushioned grips, so I'll have to be careful not to scratch the phone with the rigid clips.

http://cgi.ebay.co.uk/Car-Charger-Mount-Kit-Holder-for-HTC-Touch-HD-2-T8585_W0QQitemZ390175231504QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneBatteries?hash=item5ad8418e10
this one is available, exacly the same as ecell one, but will come "out of the box", and comes with a charger too. this seller also got the 1600mah andida battery.
for recording purpose, another good point is its having a strong and quite short metal neck that won't take cars vibrations as a long neck/flexible one would. definitely would recomend it.

Hi,
Yes, this is the same as the e-Cell item, and it works well. I paid a bit more because I was impatient and e-Cell seem to be UK based, so delivery was quicker. Some comments I found when I googled the holder questioned the location of the company, but I had no problems. I'll check out the battery, thanks.

I bought this and it will suit ur needs.

[Q] Need a Car Mount works with seidio innocase ii?

Hello all,
I love my seidio innocase ii and holster combo. I am looking for a car mount that will work with the case and allow charging too. I went by VZW today and looked at their Incredible Case. As stated in the other thread you can't use any case with it. I purchased a OEM air vent car mount, but the charging socket is blocked unless you slide your phone up in the grips (the two grips have holes cut out in the middle). I don't really like this one because the release button is at the top behind the phone. Not this one, but very smiler http://tiny.cc/eahgk
I would like to find one that can turn 90 degrees with a ratcheting action that the car charger can work with.

Bright Idea
I'm thinking about cutting up an old leather belt and gluing a small loop of it on the dash so I can clip my Seidio case on it. I'll let you know how it works out.
Just kidding dbrown! I am seriously eying the universal holder from http://www.proclipusa.com/ which definitely covers the usb port but I'm picturing a hole or slot cut through the side to fix that. All the other universal stuff looks HUGE

Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this. I just don't like their mounting spots for my vehicle, too bad too =/.

DeeBG said:
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this.
Click to expand...
Click to collapse
We're looking for a holder that will work with the phone and case. I don't want to take the phone out of my case every time I need to mount it on the dash of my car.

I just got this:
amazon.com/gp/product/B003H92LSA/ref=oss_product
But I'm not satisfied with it. Cause to the short neck, The screen is head to the top of my head, and it's not very easy to get my phone on it.
Look for a better mount, still.

i've always used this gooseneck windshield mount from verizon.
you can find it by not specifying a phone under view all mounts..
Part #WINDMNT1
19.99
it fits most all phones ever made, plus cases.....
i have my inc in it tilted so i can access the touch screen keyboard...

i got a universal one from bestbuy and it works pretty good

I have one of these on the way. http://www.clingo.com/car-mounts/universal-hands-free-mount

I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.

my friend got a car dock at the vzw store, the clip part the phone goes into is actually a removable belt clip. you can remove it from the car dock completely and put it all on your belt, pocket, whatever you wanna clip it to. however, there's no case involved in that package. i'm sure seidio has a case/clip you could mod to work with a similar product as i described first.

My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.

QSilver9300 said:
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
Click to expand...
Click to collapse
I have one of these too, it's awesome! If you want a mount that doesn't stick on the windshield AND works with a case...this is the way to go.

Hello,
I really like the xway too, but not sure if it would work with the inocase II. The case has a ridge that runs down the length of the back of the case. I went with this..
http://bit.ly/9lOy6V. I got the sm410 and currently using the vent grip. Its a little big, but does put the dinc with arms reach if needed. And the power cord is not blocked.

try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.

Arkon Mega Grip - Give them a try.

k.electron said:
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Click to expand...
Click to collapse
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again

I've tried several different mounts and haven't been happy with any, until now. I picked up a couple of the SoundGate M2 universal docks from wiredforless.com and could not be happier. The install was simple, once mounted it looks great and folds down into almost nothing. I don't know if it's still available, but I used discount code WOOT and got two of the mounts and shipping for $14.95.
AND, it works great with the Seidio case I have.
Great product, couldn't be happier.

Teksu said:
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
Click to expand...
Click to collapse
i position the left clasps to the bottom and the right ones to the center.. that ensures the volume button doesnt get pressed.

mike.d said:
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
Click to expand...
Click to collapse
You can switch out the belt clip on the car kit holster with the Seido clip, I've done it. Just tap out the pins in both clips, place the spring back in between the clip and the holster and tap one of the pins back in. Works like a charm. Now I'm trying to get all the audio and charging done with a modified 12 pin micro usb from the TV OUT cable.

I did reviews on these:
http://www.youtube.com/watch?v=awh6QP8-BBE
http://www.youtube.com/watch?v=e2MaD_ZOKCo
Highly recommend these and I use with my Seidio II.

[Q] Dash Genie

Hi guys,
Has anyone tried the Dash Genie for Streak?
http://www.mobilefun.co.uk/dash-genie-in-car-holder-p23796.htm
They advertise it as magic - and we all know magic doesn't exist - so I am doubtful especially with the larger and heavier Streak. I would buy the original holder but this just seems more practical and universal. Also being able to use the Streak's camera as an on-board camera would be useful (Maybe...).
Currently the Dell holder on the UK dell website is selling for £35, which isn't overly priced in my opinion (Unlike the 45 or 50 they had before).
Any thoughts?
PS I would buy the Dash Genie to test but sadly mobilefun don't have them in stock at the moment - I have joined the email list though..
Thanks and best wishes.

I got one and the magic really does work. Has sticky and suction base so sticks to uneven dashboard beautifully. Small sticky pad really does hold streak firmly and securely esp. In landscape. Only issue I have is weight of streak makes mount bounce about a bit unless really well tightened with screw on back,never fear it will fall off though

Does it work with otterbox case on?
Sent from my Dell Streak using XDA App

Thanks Ajed for you reply.
What do you mean by the screw on back?
I think I will only use it in landscape form so sounds good
Borijess, I'm not sure what the otterbox is made of, but seems like the plastic sticky doesn't work well or at all with silicone, teflon...etc. (According to reviews on the website).

there's a ball and socket joint joining phone holder to base. Screw tighten this and needs to be really really tightened to stop streak jiggling about. Otterbox case won't stick to pad unfortunately. I still unreservedly recommend it though.if you prefer a screen mount clingo do something similar

Thank you Ajed for your reply. I will definitely buy the dash genie when it becomes available through mobilefun website!!
...Although, some poor chap hit my car yesterday so I won't have my car for a week or so I guess - he hit a parked car on a bay as he probably had suffered from heart problem or something yesterday.

List your Recommended HD2 Accessories

So I've decided to make one thread for All HD2 Accessories.
The idea is for users to list or suggest some of the best accessories you've owned and used during your time with your HTC and give a brief recommendation.
Car chargers, cases, screen protectors etc.
If an existing thread of this nature already exists - I apologize, my intention was not to create another needless one.
Please just simply re-direct me to it by the link of the preexisting one and close off this one - No hard feelings...

I think it's a better idea for a thread than the stickied film protector that sucks.
Anyway, my recommendation is the Otterbox Defender Case

apallohadas said:
I think it's a better idea for a thread than the stickied film protector that sucks.
Anyway, my recommendation is the Otterbox Defender Case
Click to expand...
Click to collapse
I have the Otterbox Defender that i got off Amazon for 31+free shipping and im loving it. It is rather large. It fits in my jeans just fine but im a big guy.

TriniKing_CE said:
So I've decided to make one thread for All HD2 Accessories.
The idea is for users to list or suggest some of the best accessories you've owned and used during your time with your HTC and give a brief recommendation.
Car chargers, cases, screen protectors etc.
If an existing thread of this nature already exists - I apologize, my intention was not to create another needless one.
Please just simply re-direct me to it by the link of the preexisting one and close off this one - No hard feelings...
Click to expand...
Click to collapse
"triniking" lol wassup g? nice to see another trini onboard (sorry for this off-topic post btw)

jessmanuelgarcia said:
I have the Otterbox Defender that i got off Amazon for 31+free shipping and im loving it. It is rather large. It fits in my jeans just fine but im a big guy.
Click to expand...
Click to collapse
Same. I'm pretty tall so the size doesn't bother me at all. If I were tiny then I could imagine the extra weight might be annoying, but I enjoy having the ability to clip it quickly to the holster. I'm also now really fast at removing it from the case in order to get to the microSD card to load up android builds directly to the card.

PS3 Controller, better and cheaper then most bluetooth pads.
In car holder, I use a cheap chinese one works fine.
THB bury bluetooth connection / HUD, good in car, read your messages/call lists/make calls/contacts ect.

here is my suggestion...
I got the first Hard Gel-case that was available and did not quite like it because it was not really perfect fit. Than at one occasion I've read I think here at XDA a post that was pointing towards this case (pics attached along with ebay item number) that was really good good fit for tmobile US HD2s ... and - ordered, and have it since... the best fit so far and serves me well.
ebay item number is: 330485183615

Hi,
Would you kind forumers give me some good suggestions on possible physical keyboard accessories that fits the HTC HD2 on an Android ROM?
I have been looking at a few and am still looking. I bought an old Freedom Pro Keyboard and found it a bit unstable to use (keys not registering certain presses). So please recommend what you are using if possible. Thank you!

My phone never leaves it's £3.99 Wallet home!
I'm already on my second one (I decided to replace it after six months as it was getting tatty, and at this price I can't complain). What's great is that it serves my need as a wallet, keeps all my valuables together, adds little bulk to the device (in the sense that it's also your wallet ), and my phone looks as good as new despite my occasional clumsy droppage. Definitely a must-have for me.
While on eBay I just saw a smarter one for £9,99 which I'm a little tempted by...
My DREAM accessory would be a genuine, larger-capacity, same physical-size battery, ah but we can only dream...

So after watching a couple reviews, I'm liking the otterbox defender case and I'm giving it some consideration... Just thought I drop a line, see if any feedback is given on this (positive or negative)

1. mugen 2600 mAh extended battery (must have...GET ONE !!!)
2. skull candy ear buds nice and loud for 13 bucks on sale!
3. 2 16gb's + 1 8gb for music
4. zagg screen protector
5. when not using the extended battery i use a thin rubberized 1 piece hard case mine is actually navy blue not black

Otterbox Defender..a must have for my work. very tough but makes the screen a little less sensitive, a small price to pay for good protection, i wish it was a little more dust and waterproof though.
HTC Oem flip case simple, cheap and works well
Desk Genie Non-Slip Charging Desk Stand..brilliant love this stand, again cheap but works well, bought this for my TP2 and still using it
Vikuiti (TM) DQC-160 best screen protector ive ever used, easy to install, would buy another if ever i needed to but 6 months and so far i dont!
Andida "1600" battery, so cheap i dont care if its 1200, good enough for a spare.
Motorola HT820 Bluetooth headphones...Old school but work flawlessly
IO Play bluetooth music streaming car kit...got mine for £60, pairs first time evertime, good voice quality and full A2DP, which is more than ive heard said for more expensive alternatives of the feathery kind!
HTC Car holder i got free with my TP2..tight but just fits
If i didnt really need to use the Defender everyday, I would have bought and extended battery, probably the offical one, but hey...

I'm looking for a soft rubber case like the case I have for my i900 Omnia.
I've just ordered an HD2 and I find this sort of case is ideal for satnav because I change cars a lot and I can plug the charger in and the phone lies flat on top of the dash without sliding off.
I haven't got the time or space to carry a proper cradle, but this works just fine.
It's made of soft, stretchy rubber a bit like the inner tube out of a tyre, with some texturing on the back which helps it grip - does anyone know what I am trying to describe?

my pocket.

^ What he said + Vikuiti (TM) screen protector.

I know I'm going to regret asking this but who or what is "my pocket" apart from the bleeding obvious?

Music Bluetooth headset
My recommendation is Bluetooth music headset ''MW600'' from Sony ericsson.
Its also been called or well it is a officially accesiore for the Sony ericsson Aino.
Cant remember and find the exact typenumber that the MW600 have for the Aino, so its has 2 type numbers.

PS3 controller
jimm1432 said:
PS3 Controller, better and cheaper then most bluetooth pads.
In car holder, I use a cheap chinese one works fine.
THB bury bluetooth connection / HUD, good in car, read your messages/call lists/make calls/contacts ect.
Click to expand...
Click to collapse
You can use the PS3 controller with HD2? Is it possible to use another bluetooth/wireless controllers on this device?
I'd be glad if anyone could tell me.

NEMESIS_9000 said:
You can use the PS3 controller with HD2? Is it possible to use another bluetooth/wireless controllers on this device?
I'd be glad if anyone could tell me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=689984

1. OtterBox Defender (built in screen protector removed as below far better) £30
2. Vikuiti™ screen protector ADQC27 (Same as DQC160, but now anti-reflective too) £10
3. A couple of cheap spare batteries (never had problems with them myself) £3ea
4. Mains USB/Battery charger (replaces the HTC one and adds spare battery charging functionality) £3
5. Retractable Mini-USB cable (great for travelling when combined with above) £2
6. Komputerbay MicroSDHC 16GB Class 6 £30
7. PS3 Controller to work with FPSECE (PS1 Emulator) via CobaltContoller £30
£115 of accessories... blimey... it adds up!