Related
Hello,
Thought I'd share the updated How To's we have up on the site. All complete with easy to follow videos for newbies.
How To Setup ADB -
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
How To Load a Theme -
http://theunlockr.com/2009/10/15/how-to-load-a-theme-on-an-android-phone/
How To Flash a New Recovery Image -
http://theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted/
How To Switch to a Different SD Card (for use with Swap, Hero ROMs, etc.) -
http://theunlockr.com/2009/10/15/ho...-android-when-using-swap-hero-and-or-apps2sd/
How To Backup/Restore Your Android Phone -
http://theunlockr.com/2010/02/06/how-to-backup-and-restore-your-android-phone/
HTC Legend How Tos -
How To: Root the HTC Legend -
http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/
How To: Load a Custom ROM on the HTC Legend -
http://theunlockr.com/2010/06/07/how-to-load-a-custom-rom-on-the-htc-legend/
How To: Unroot the HTC Legend -
http://theunlockr.com/2010/06/07/how-to-unroot-the-htc-legend/
Hope these help people! Enjoy!
For a list of all our How To's (w Videos) sorted by Phone go here -
http://theunlockr.com/how-tos/android-how-tos/
ty but the links are corrupted
edit: server was down
1st off I'm not a Dev, I'm using Ken's rom and added some mods and i thought i'd share it so some people can flash it and not have to apply patch/mods.
R-9 2.3.4 ROM
*NEW v5* This includes all the previous features of v4/v3
*V5 DOWNLOAD*
Code:
*v5*
- Base updated to πCRUST Official 91 build (thanks to navalynt)
- Droid 3 camera (stock camera restore zip below)
- 1080p video option
- AppWidgetPicker
- Skip blur setup option
- Updated SuperUser
- Updated Battery fix
*V4*includes
- Wifi Tethering
- APN menu opened
- Google Talk video
- AGPS option
- Dock Settings
- HDMI Settings
--------------------------
- Battery fix
- International APN (all network support incl ATT)
- 8 Point touch
- HDMI hack for webtop
- Battery percentage by Nottach
- GPS config set for international (backup included .bak file if you have issues)
- Stock boot animation minus ATT logo.
- Updated Google Maps
- Spare Parts (untick compatible mode for full screen apps)
- Stock blur messaging app removed and replaced with stock android (no conversaion limit)
- Different Font
πCRUST base features.
Code:
General Optimizations:
Fully deodexed
Fully zipaligned
Fully PNG optimized
build.prop optimizations
touchpad.cfg optimization
SU binary with latest SuperUser.apk
Busybox Installed
SQLite3 Installed
Select Network (menu option enabled, select manually 2G/3G, or auto)
Gootle Talk Video over 3G
FuguTweaks
Juwe11 optimizations
Einherjar Dev Team Permissions Script
DarkyROM Zipalign Script
SDcard Speed Fix (2048 by default)
Sqlite script to enable Gtalk Video
Defaults set to allow:
Unknown Sources (sideloading)
Data Roaming
All Animations
Tethering (no entitlement)
It has stock kernel. I recommend new GB radio Thanks to Samcripp for cwm zip
BACKUP NOW!
To install:
Download the rom
Put on SD card.
Boot into CWM
Wipe Data/reset factory
Install From SD
Click to expand...
Click to collapse
For international users (non ATT) , use the correct kernel from this thread
If you want working Webtop
then Flash Joe's webtop v1
New Market zip below
STOCK SMS APP Restore zip below
STABLE! V4 Base: V4a DOWNLOAD
v4a includes finger scanner fix
Base is Ken's 4.5 (BIG THANKS TO KENNETH!)
*v4a* Using Ken's Alien installer script so does not touch Webtop!
New features have been taken from Alien Rom (thank you Kenneth again)
original features
Code:
- Root
- Deodexed
- Compressed
- Zipaligned
- Memory hack
- SD card speed hack
- Rooted
- SQLite3 added
- Update script upgraded
DISCLAIMER|WARNING
USE AT YOUR OWN RISK!! I take no responsibility if you brick!
Click to expand...
Click to collapse
I TAKE NO CREDIT FOR THEIR WORK, I SIMPLY PUT STUFF TOGETHER FOR ME AND NOW SHARING IT.
Thanks to michael0619, kamma, Nottach, Kennethpenn, navalynt, Jug6, Unknown, Joe and who ever else, if i have used your work please tell me and i will credit or remove it.
For full screen apps, untick compatible mode in spare parts and the reboot.
V4 does not touch webtop..this means if you have a working webtop on 2.3.4 it will work after upgrade to v4.
V4 include Gtalk Video.
big thanks to you and kenneth
i screw up my atrix by pulling the battery when installing an app
i was stuck at gingerblur screen without further movement for good ten minutes. i think is time to move on to a new rom
liger-zero said:
big thanks to you and kenneth
i screw up my atrix by pulling the battery when installing an app
i was stuck at gingerblur screen without further movement for good ten minutes. i think is time to move on to a new rom
Click to expand...
Click to collapse
Try it and let me know
Back up 1st
well, my phone is unbootable(right?)
might as well wipe the database and install it fresh. does it compatible on ATT atrix?
I keep getting an error just says unable to open (bad) anyone have any idea?
it says cant open /sdcard/gingerbread.... .zip(bad) installation aborted
is it because i hasnt unlock the bootloader?
Yes u need unlocked bootloader.
Error on zip?
My bootloader is already unlocked and yes an error on the .zip file
Ok give me 10 mins to upload a new zip
EDIT: new zip uploaded
can you confirm if the messaging app works when you open the settings in the app. I tried to install it my self and it worked but every time I tried to access settings it would force close on me.
on21st said:
can you confirm if the messaging app works when you open the settings in the app. I tried to install it my self and it worked but every time I tried to access settings it would force close on me.
Click to expand...
Click to collapse
yes it works, because i have it. I installed it in /system/app and not data/app
Downloading now... is this a new zip upload?
I installed the new zip to my ext. SD Card and rebooted into CWM but get an error where the installation aborts.
crea78 said:
I installed the new zip to my ext. SD Card and rebooted into CWM but get an error where the installation aborts.
Click to expand...
Click to collapse
I have updated v3 and tested on my phone and it is working.
i really didnt want to flash over my nice setup but for the sake of testing my own i had to.
i'm uploading v3
Thanks.. just finish flashing
Ronaldo_9 said:
Yes u need unlocked bootloader.
Error on zip?
Click to expand...
Click to collapse
im not sure, i tried download the zip couple times. still gives me the same error
i probably try your new zip and work on the bootloader tomorrow.
thanks for your effort!
I thought I was in the development board... Oh wait, you just posted in the wrong section.
Thanks for the effort bud.
question, does it support japanese files?
i have a lot of mp3 files that is in japanese, it would have been sucks if the 2.3 doesnt support them
it supports japanese. no problem at all.
Here is a version of the Droid 4 Stock MotoBlur in ROM format.
** This is for SAFESTRAP ONLY **
** WARNING: THERE IS NO FASTBOOT RESTORE AVAILABLE FOR THE DROID 4. YOU TAKE A SERIOUS RISK WHEN USING THIS ROM OR ANY SOFTWARE WHICH HAS THE POTENTIAL TO BOOTLOOP OR SOFT BRICK YOUR PHONE (NOT MATTER HOW SMALL THE RISK) **
Want to remove the bloatware?
Trying to create a deodex /system?
Just wanna feel more comfortable making changes to your /system?
This ROM is usable in Safestrap as the 2nd-system so that recovery should always be available should something go wrong.
MAKE SURE TO DO A FULL BACKUP IN SAFESTRAP PRIOR TO SWAPPING TO SAFE SYSTEM -- THIS WILL BE USED LATER SHOULD AN OTA BE RELEASED FOR DROID 4.
Information about Safestrap here:
http://hash-of-codes...festrap_24.html
Download link for Stock MotoBlur 6.13.215 for Droid 4
md5sum: e8d8973d177eaaeda045b64462988767
Safestrap is similar in behaviour to ClockworkMod Recovery. With the exception that you only flash .zip files to your 2nd-System which is "safe" as it protects your way into recovery should anything go badly.
What's in the ROM:
- Stock MotoBlur for Droid 4
- Rooted w/ Superuser
- Some of the obvious bloatware removed: Netflix, Slacker Radio, NFL Moblie, etc
- Nothing else has been changed
Basic Steps for applying this ROM:
- Install Safestrap from here:
http://hash-of-codes...wnloads_24.html (MAKE SURE YOU GET DROID 4 VERSION)
- Once installed use the "Install Recovery" button inside the app
- Reboot the phone and enter Safestrap Recovery by pressing the [menu] button when the Safestrap Boot Screen is shown
- MAKE SURE YOU DO A FULL BACKUP BEFORE TURNING ON SAFE SYSTEM
- Enable "Safe System" using the "safe boot menu" -> "Toggle Safe System" (once complete you should see: "Currently: ENABLED" at the top of the screen).
- Now you can select "install zip from sdcard" and follow the prompts.
Controls for Safestrap are:
- Volume Down or the MENU button will scroll down
- Volume Up or the HOME button will scroll up
- Power button or the SEARCH button will select
- BACK button will go back 1 menu
PLEASE BE SAFE AND USE COMMON SENSE
Enjoy.
INTRODUCING THE SAMSUNG GALAXY CAMERA TOOLKIT
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports a multitude of Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus modules]
* Various Root options using insecure boot image or custom recovery
* 1-Click For All to Unlock, Root, Rename the Restore Files and install busybox [Nexus modules]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung modules]
* Fix “Superuser/SuperSU has stopped” message after rooting [Samsung modules]
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Phone Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Install BusyBox on your device
* Install Samsung Knox notification disabler on your device [Samsung modules]
* Install Root checker on your device [to be added to the Nexus modules]
* Extras, Tips and Tricks section with downloadable device user guide
* Auto Update ToolKit to latest available version at startup [PRO ONLY FEATURE]
* Check for latest versions of Superuser [root] and custom Recovery images [PRO ONLY FEATURE]
* Program up to 10 Quickpick slots and run them very quickly [PRO ONLY FEATURE]
* Mods section to automatically perform certain tasks on your phone
* Download Stock Firmware Image for extracting and flashing
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus modules]
* Flash Custom Recovery or Stock Firmware Image to device
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP or Stock Recovery without Flashing it [Nexus modules]
* Boot or Flash .img Files directly from your PC [Nexus modules]
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to various Modes automatically
* Display Important Information about your device
* Display various Help and Information screens and save a screenshot to your pc/send to default printer
* Many many more features
————————————————————–
Supported devices and latest supported builds *HERE*
————————————————————–
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE2: As the exe files are not Digitally Signed with a Microsoft Certificate they ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, fOmey for TWRP for the Galaxy Gear
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE YOUR DEVICE. NOTHING IS RESTRICTED.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
2. USING THE UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. The basic Toolkit files are included in the full install package but if you select a device then the working folders will be created and the device files downloaded. Once the files have been extracted the Toolkit will ask if you want to check if an Update is available (for pro users to download/install). If you type ‘no’ then you will be taken to the Model/Build selection screen where you can do a number of things:
Type ’00' to enter your activation code and enable pro features, ‘i’ will take you to the Information and Help Section, ‘a’ will give you information on how to add support for a new build, ’99' will take you to the Basic Toolkit for quick use or if you do not have a supported device and want to perform general android tasks.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest custom recovery and superuser files available (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers.
The Information section which you can get to from the Model Selection screen or from the Main Menu has a wealth of help and frequently asked questions. If you need help then please look there first before asking questions in the thread.
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Push the Zoom rocker on the top to the right [zoom in]. Keep holding it and push the Power button in for around 10 seconds until you see the white Samsung screen
2. Let go of everything and the device will boot into Recovery mode
NOTE: To reboot to your OS hold the Power button until the device buzzes and you see the white Samsung screen
How to get into Download Mode (For Odin)
1. Push the Zoom rocker on the top to the left [zoom out]. Keep holding it and push the Power button in for around 10 seconds until you see a warning screen
2. Push the Zoom rocker on the top to the right [zoom in] to boot the device into Download mode
NOTE: To scroll through the menu use the Zoom rocker on top and to select press the Power button
--------------------------------------------------------------
ChangeLog:
Unified Android ToolKit v1.2.8 (25th April 2014)
+Added Samsung Galaxy Camera support
+Added cwm recovery by twistedumbrella to enable custom recovery actions
ToolKit v1.0 (15th January 2013)
+Initial Release
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**FAQ**
Q. Help me I can't find my build in the Model Selection Screen
The Toolkit includes a selection of Insecure Boot Images to cover all the different builds available. As there are very many different builds it is impossible to include an image for every single build but some builds share the same Boot Image. If you have a build that isnt listed on the Model Selection Screen you can therefore use a similar build. The best way to go is up to the next available build as it should offer more compatibility with the build you are using but if that isn't available then try the next build below your one as it should still be almost identical as long as it is the same version (ie. 4.1.1).
The Model Selection Screen is there so that if a task in the ToolKit requires an insecure kernel [to perform adb root commands] and your phone doesnt already include one, a compatible boot image [with an insecure kernel included] can be flashed to provide adb root access.
If you have a Custom Rom flashed to your phone then it will most probably have an insecure kernel included so it doesn't really matter if your build is not listed on the Model Selection Screen and when asked [by certain functions] if you have an insecure kernel on your phone you can answer 'yes'. However if the function fails then your kernel may not be insecure in which case you can flash one from the ToolKit. If you need to do this make sure the right build [or closest available build] is set so you flash the right image for your phone.
----------------------------------------------------------------------------
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF like removing system apps.
----------------------------------------------------------------------------
Q. Is there currently no way to root the Samsung Galaxy S3 without voiding the warranty?
All methods of rooting will void your warranty in some way as you will have superuser files on your phone that arent supposed to be there. Flashing a custom kernel or recovery to root will increase the flash counter and also void any warranty. If you dont want to risk it or you aren't sure then you shouldnt really be flashing your phone and should just leave it alone. Its your choice .
----------------------------------------------------------------------------
Q. Will flashing Stock ROM via odin using the toolkit replace everything that was flashed before? recovery? etc?
Yes a Stock Image flashed via Odin will replace all your key partitions (boot, recovery, system) with the stock firmware. If you want to reset the phone back to an 'out of the box' state then you want to enter recovery and do a wipe first which will reformat your userdata partition.
----------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
----------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may pick it up as potentially harmful when it is not. They will pick up ANY file that doesn't contain a purchased Microsoft certificate in the same way. Just Restore the deleted file and exclude it from further scans and it will be fine. Or switch to a better AntiVirus program such as BitDefender.
----------------------------------------------------------------------------
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera mode (P2P). To do this open the notification area, click where it says connected as and change from MTP to PTP.
----------------------------------------------------------------------------
Q. When connecting the phone I get 'USB Device not Recognized' and no serial number shows in the ToolKit
I actually had this problem recently and what fixed it for me was to make sure that the drivers have been installed, then shut my phone down plug the usb cable in and restart it. The phone booted up and the device was recognized and drivers installed correctly. May not work for everyone but worth trying.
**reserved if needed**
Reserved for "how to" videos if I ever get this camera!
http://www.youtube.com/user/wwjoshdew
Reserved for Beer and Precels
Great job Skip as always
"hey can you take a picture of us"
"no sorry i bricked my camera"
Whoa!! This is awesome! I have used your toolkits for my Samsung Galaxy S3 and my Note II and really pleased to see you developed a kit for the Galaxy Camera ツ very impressed with these utilities and they've been so useful so far.
Thanks for the effort you put in fella.
Sent from my Samsung Galaxy Note II using Tapatalk 2
SAMSUNG GALAXY CAMERA TOOLKIT AUTO UPDATE V1.1.0 [18TH JAN 2013] AVAILABLE!!
Changelog:
+Added LTE MODEL [EK-KC120S] support to Model Selection screen
+Minor bug fixes and improvements to code
+Added LTE MODEL [EK-KC120S] link support to Firmware download section
[Auto Updates are only accessible if you have donated to the Toolkit project, received an activation code and unlocked the donator features. Auto Updates are a much faster and easier way of pushing small updates that would otherwise not be worth doing. I can push a single textual change or add support for a new build without having to go through the whole process of building a full version and uploading a large file. IF you are not able to or do not want to donate to unlock the Auto Update feature (and other donator features) then all the smaller updates are collated and a full build made when I have time or if there are enough updates to warrant it. This is the easiest way to make sure all the Toolkits are as up to date as possible. IF you have any views about this please pm me about them and do not post in the open thread]
Enjoy
Mark.
This was excellent, thank you!
And you are a Norfolk bloke too! :good:
Still no support for the VZW model?
Sent from my SCH-I605 using xda premium
perlmane said:
Still no support for the VZW model?
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Verizon have seen fit to block the bootloader just like they lock everything else. I dont know why people who are insterested in messing around with their devices bothers going through verizon as they try to make it as hard as possible. I dont have the expertise to mess around with the bootloader so unless someone like Adam Outler looks into it I doubt you will be able to do much with it.
You can still use the Toolkit to do minor actions such as install apk's, adb backup but nothing that requires an insecure boot image or root.
Mark.
SAMSUNG GALAXY CAMERA TOOLKIT AUTO UPDATE V1.2.0 [5TH MARCH 2013] AVAILABLE!!
Changelog:
+Added full support for EK-GC100 4.1.2 BMA1 Build
+Added full support for EK-KC120S 4.1.2 AMA2 Build
+Added download links to new builds to the Firmware download section
+Updated SuperSU Root files to latest version [V1.20]
+Added TWRP NAND Backup/Restore feature to Backup/Restore section in Toolkit
+Updated code in main Toolkit to latest version
[Auto Updates are only accessible if you have donated to the Toolkit project, received an activation code and unlocked the professional features. Auto Updates are a much faster and easier way of pushing small updates that would otherwise not be worth doing. I can push a single textual change or add support for a new build without having to go through the whole process of building a full version and uploading a large file. IF you are not able to or do not want to donate to unlock the Auto Update feature (and other professional features) then all the smaller updates are collated and a full build made when I have time or if there are enough updates to warrant it. This is the easiest way to make sure all the Toolkits are as up to date as possible. IF you have any views about this please pm me about them and do not post in the open thread]
Enjoy.
Mark.
SAMSUNG GALAXY CAMERA TOOLKIT AUTO UPDATE V1.2.2 [18TH MARCH 2013] AVAILABLE!!
Changelog:
+Added support for WIFI ONLY MODEL [EK-GC110] 4.1.2 AMC2 Build
+Updated SuperSU root to latest version [1.25] and built into Toolkit
+Updated procedures in Toolkit and improved text where needed
+Added option to exit on the Model Selection screen
[Auto Updates are only accessible if you have donated to the Toolkit project, received an activation code and unlocked the professional features. Auto Updates are a much faster and easier way of pushing small updates that would otherwise not be worth doing. I can push a single textual change or add support for a new build without having to go through the whole process of building a full version and uploading a large file. IF you are not able to or do not want to donate to unlock the Auto Update feature (and other professional features) then all the smaller updates are collated and a full build made when I have time or if there are enough updates to warrant it. This is the easiest way to make sure all the Toolkits are as up to date as possible. IF you have any views about this please pm me about them and do not post in the open thread]
Mark.
Work Flawlessly on the All in one root! Can't wait for the custom recovery.
This is actually not my first time using your tools. If I donate, do I get access to the other device tool kits as well?
Thanks for your great work!:good:
GreenBot said:
Work Flawlessly on the All in one root! Can't wait for the custom recovery.
This is actually not my first time using your tools. If I donate, do I get access to the other device tool kits as well?
Thanks for your great work!:good:
Click to expand...
Click to collapse
Activation codes will only work on the Toolkit that they are generated for.
Mark.
Gc100xxbmc3
Hi there,
Will there be any root support for XXBMC3 rom for galaxy camera in singapore?
xiaoan said:
Hi there,
Will there be any root support for XXBMC3 rom for galaxy camera in singapore?
Click to expand...
Click to collapse
Im currently working on the Galaxy Camera update it should be done today.
Mark.
SAMSUNG GALAXY CAMERA TOOLKIT AUTO UPDATE V1.3.0 [17TH MAY 2013] AVAILABLE!!
Changelog:
+Added Clockworkmod Root method 1.0.1.8 to replace ChainsDD method for better support
+Added Toolkit Hard Reset option in Toolkit Settings screen
+Added bypass model selection screen and go straight to main menu for simple tasks
+Added support for EK-GC100 upto 4.1.2 build BMD1
+Added support for EK-GC110 upto 4.1.2 build AMC4
+Added support for EK-KC120S upto 4.1.2 build AMD2
+Added new firmware links to download section
+Bug fixes and improvements to main code
[Auto Updates are only accessible if you have donated to the Toolkit project, received an activation code and unlocked the Professional Version. Auto Updates are a much faster and easier way of pushing small updates that would otherwise not be worth doing. I can push a single textual change or add support for a new build without having to go through the whole process of building a full version and uploading a large file. IF you are not able to or do not want to donate to unlock the Auto Update feature (and other professional features) then all the smaller updates are collated and a full build made when I have time or if there are enough updates to warrant it. This is the easiest way to make sure all the Toolkits are as up to date as possible. IF you have any views about this please pm me about them and do not post in the open thread]
Donation links can be found at http://www.skipsoft.net/?page_id=703 to update to the Professional version and enable Auto Updates.
Thread Link: http://goo.gl/OH7Mi
Mark.
mskip said:
SAMSUNG GALAXY CAMERA TOOLKIT AUTO UPDATE V1.3.0 [17TH MAY 2013] AVAILABLE!!
Changelog:
+Added Clockworkmod Root method 1.0.1.8 to replace ChainsDD method for better support
+Added Toolkit Hard Reset option in Toolkit Settings screen
+Added bypass model selection screen and go straight to main menu for simple tasks
+Added support for EK-GC100 upto 4.1.2 build BMD1
+Added support for EK-GC110 upto 4.1.2 build AMC4
+Added support for EK-KC120S upto 4.1.2 build AMD2
+Added new firmware links to download section
+Bug fixes and improvements to main code
[Auto Updates are only accessible if you have donated to the Toolkit project, received an activation code and unlocked the Professional Version. Auto Updates are a much faster and easier way of pushing small updates that would otherwise not be worth doing. I can push a single textual change or add support for a new build without having to go through the whole process of building a full version and uploading a large file. IF you are not able to or do not want to donate to unlock the Auto Update feature (and other professional features) then all the smaller updates are collated and a full build made when I have time or if there are enough updates to warrant it. This is the easiest way to make sure all the Toolkits are as up to date as possible. IF you have any views about this please pm me about them and do not post in the open thread]
Donation links can be found at http://www.skipsoft.net/?page_id=703 to update to the Professional version and enable Auto Updates.
Thread Link: http://goo.gl/OH7Mi
Mark.
Click to expand...
Click to collapse
is this support for XXBMC4 build?
Q&A for [ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [RETIRED]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [RETIRED]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
any idea where i can find a custom rom that similiar to ternceng no internal sd rom?
i really need it, because my p1000 internal sd is broken
Links please
Would appreciate the links for samsung P1000.Thanks
thank u
thank u
Need help guys my SGT p1000 is bootlooped and its in a stock recovery and unrooted Plsss help mee
I have posted a compilation of information and several different links which are scattered throughout xdadevelopers forum on P1000 and or P1000M . The 1000M has to be changed to P1000 to use the Custom roms. You may have to go back to Gingerbread version so goodluck in reading all this information through but dont give up.I have never dealt with bootloop which is why I have included as much info as possible.. you may be able to ask specific questions in the other forum links:
Samsung GT P1000M
http://forum.xda-developers.com/showthread.php?t=1694000
I have been trying to update my Galaxy Tab GT-P1000M
Model number: GT-P1000M
Firmware version: 2.2
Baseband version: P1000MUGJJ6
Kernel Version: 2.6.32.9 [email protected] #3
Build number: FROYO.UGJJ6
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/show...php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
Continue with the rest, and you will get Overcome 4.1 and after that you can install whichever custom ROM you want .From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
Going back to Gingerbread stock, follow carefully:
http://forum.xda-developers.com/showthread.php?t=1881981
The Overcome ROM and Kernel is intended for GSM based Samsung Galaxy tab Only !!
(GT-P1000 or T Mobile or AT&T or Telstra Tabs only)
Overcome ROMs and Kernels will NOT work with Latin American Tabs (the P1000L/N Galaxy Tabs) or CDMA-Based Tabs (If your Tab doesn’t have a SIM card,it won’t work…sorry!) or Wi-Fi Only Tabs (P1010 models!)
The_Installation_Guide_The_Overcome_Experience.pdf
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
http://forum.xda-developers.com/showthread.php?t=2064341
once you install the GB Stock safe 5 tar file as per instructions use the JPZ Modem folder as per instructions on PDF –this is an Italian modem bin file but it will convert the P1000M to a P1000 which then allows you to complete install with the overcome wipe files and ultimately use whatever custom Rom for a P1000 you wish as there isn’t any links or availability for a P1000M except for gingerbread.Its a long process to get to using the custom rom but it works and seems to be the only way to go. I used omni nightly4.4.4 plus the gapps files and and update SU zipfile.
Further notes:fix-android-process-media-has-stopped-force-close-crash(which started once tablet rebooted after installing omni nightly custom rom
Go to your app settings page (Settings > Applications > Manage Applications) and open Media Storage. Hit clear data.
If you have a custom recovery installed (most custom ROMs and kernels do have it), boot into it and fix permissions. In Clockworkmod Recovery, you can find it under “Advanced”. TWRP recover also has a similar option. Being a Linux-based OS, permissions are of paramount importance to smooth functioning of Android components.
In Manage Applications, open Google Services Framework. Clear data.
Open Google Play Store. Hit clear data. Note that this will clear all play store data, including your Google sign in. You will have to login with your Google / GMail account again the next time you open Play Store.
Open Download Manager, and clear its data too.
Backup your data and format SD card. Make sure to backup all data on your SD card, including media, apps and other files, before formatting it. Use FAT32 formatting, which is preferred for Android. This is because android.process.media is related to camera, gallery and other multimedia components, and SD card errors may cause this force close error.
Try a different SD card. Many SD cards, particularly those of class 6, 8 and 10, have been reported to not work reliably with Android devices. Class 4 seems to be the safest option (I use a San Disk Class 4, and it has been flawless).
also check out this link:
http://forum.xda-developers.com/galaxy-tab/help/qa-cm-11-0-android-4-4-2-kitkat-galaxy-t2948855