Hi, I recently installed Deep Shining Rom on my Tmo HTC Touch Pro2, now i am unable to sync with my windows 7 laptop and on my windows 7 desktop. I am also unable to also install roms using my sd card. Keeps saying no file .. Can anyone help me with this problem?
I'm just looking into installing other theme's.
If you are flashing the device with an MicroSD card, are yuo sure you have got a file called RHODIMG.nbh?
do i have to put the .nbh? i did change it to RHODIMG tho
So HERE we go You got the answer
Nope.. doesnt work...not even changing the name, still says no file
I have the same problem on my girl's phone too. Anyone got any ideas?
did a factory reset but nothing still..
I found I had this problem when I tried using a 2GB card for this purpose. I used an 8GB card that even had other stuff on it , but I put the RHODIMG file in the root directory, and it worked like a charm! Try using a different card, then.
hizqueen said:
Hi, I recently installed Deep Shining Rom on my Tmo HTC Touch Pro2, now i am unable to sync with my windows 7 laptop and on my windows 7 desktop. I am also unable to also install roms using my sd card. Keeps saying no file .. Can anyone help me with this problem?
I'm just looking into installing other theme's.
Click to expand...
Click to collapse
Related
Hey Button...
How are you doing?
Well I got this Qtek 9100 few days ago and I tried to first backup my rom in my mini Sd card using your util wizBackup before using the newest room you made.
But the thing is I cannot see the mini Sd from the explorer anymore....
What should I do to see it again?
By the way do you know how to solve this activesync problem? I had to enable the IP settings for the PocketPc connection in order to make it work (despite of some windows error msgs after the connection), but then if I disconect and reconect again it will not work anymore.
Sorry by the length.
Thanks in advance
What should I do to see it again?
Click to expand...
Click to collapse
Now you should format SD card :wink:
searching for wizBackup
I'm going to upgrade my ROM to the new one provided by Orange Entreprise.
I search for wizBackup, but didn't find it. Can anyone upload wizBackup or similar software and give me the URL please?
thanx,
Sina
Hi All!
I have the same problem: after using wizBackup I cannot see the mini SD anymore.
Formatting is impossible because card is not recognized by none of the programs which I try (ie: Pocket Mechanic, flash format...)
But I'v noticed when I insert or remove SD my QTEK is waking up but still card is not recognized properly :/
Any suggestions and help?
(sorry for my English)
Make mini SD visible again after using Wizbackup Tool!!
I had the same problem after the back up...
No tools that could make my SD card visible again, until I found this little tool!!!
With this tool you can use your Wizard like a USB memory stick and then you can format it again with your desktop Windows.
Just install and connect the Wizard with the USB and format!!!
Good luck!
Wow!!!
THX a lot Marvie. Your solution is working!
I know WM Storage, but not this way
Everything is ok now, thanks once more.
If You came to Warsaw/Poland - let me know, I own You a few beers
This method didn't work with my card but I've found better solution - just insert your card to SD adapter and then to photocamera and format it from this device. Works 100%
I have copied the installation files across from my old microSD card and arranged with ALK to have the app deactivated and set up for migration.
Have run the install and it says installed fine.
But when I try to run it, it says "copilot is not a valid pocket pc application"...
Have tried reinstalling, have tried using shortcut from programs and from program files on storage card. Even tried installing to device memory.
Any ideas?
strange mine works perfectly ok- I copied both folders over from the original SD card over to the microSD card on my TytnII. then ran the installer from one of the folders and it installed ok.
The only think I made sure was that both folders were at the root level of the storage card....
Thats how mine was...
Anyway am in the midst of a hard reset as I fear that various other satnav trials have mucked up my dll's...
Update - hard reset didnt help at all... same problem...
works beautifully on mine.
you do need to make sure you are using a 2577 with the 6.0.4.110 binaries or it definitely won't work.
Just for your info ... TyTNII with MemMap v5 - 3.3TB of UK ord survey ... works brilliantly as well
I can't load my desktop version and update it. The cd's are corrupt or something!
So I can't even open the copilot on the device to check the version. I have run the patch'd update from alk support - but no joy?
So ALK have confirmed that the replaced version on my storage card is the latest build but no joy...
Hello everyone.
After a hard reset (I installed SPB mobile shell v2) my phone just froze.I uninstalled the storage card,I soft reseted it about 10 times but I never got to the logo screen.
Anyway,after that I started to install what I could and when I got to my destinator file it started copying it at the beginning but after a minute or so it popped an error message that it "could not recognize the path of the file I was trying to copy"!
I never had a problem before this.I have hard reseted it about 10 times and managed to copy everything successfully.
I don't know what to do...
I have a card reader but it wont "see" my card.I even tried to install it to the main memory.I read that this could be a PC net framework issue.I have net framework version 2 installed so I tried to install it again and even tried to install v3.5 but my PC won't let me install it...
Before I format my PC and "clean" it up has anyone encountered a similar problem?
Thank you
hello i am having problems with flashing a custom ROM. I've formatted a micro sd its 2GB. Then I added the ROM file, renamed it to kovsimg.nbh and started the phone as stated (by pressing the vol down button). Then the tri colour screen pops up then a quick screen comes which says no image path I have also... installed the hard spl thingy. Where am I going wrong? Please help !!!all want is reinsstal my xperia x-1 a new windows 6.1 how i can do this plz help my phone is give me this alert SİMCARD NOT İNSERTED'' Plz help me
Do you have press and hold the vol down and the power until the screen show"loading"???
i did bur it says no image ...what i can do?
Says no image??I don't have this problem...so I can't help you,sorry...
Hello you're not alone in the dark
My Xperia do it in the same way. So i hope we will get an answer.
Additional i have problems to use the Internet yet. After receiving a config SMS the applications which are using internetdata didn't get some. The connecting to provider or wifi seem OK but no data for the application.
Provided the card is read, make sure you formatted your card properly with FAT32 and placed renamed ROM file into the ROOT.
It's possible to read the card (after booting the phone). The card is Fat32 fomatted and the imagename is set. But it's not only the problem to flash using the CD-card. Also trying by using the sync-methode will fail. I get the splashscreen with the bar showing the percentage. In the state of 0% i get an error message. No recovery is needed, but i never get the phone flashed.
My problems is exackly the same
If it doesn't work use the USB method, it always works.
Hi VingZTV,
You're wrong please read my post #7 in this thread.
I called it sync method, cause you are using active sync.
cu HAndi
I encountered this problem too. My present X1 (3rd already) refused to hardSPL or do anything with both PC (stucked at 0%, connection errors etc) and SD method ("no image file" later stuck at "loading"). Previous ones worked with either SD or PC method
This time I tried different cables and PCs and couldn't hardSPL
nor was the SD card method working, tried different cards and formatted one to fat32 before putting image file
it seems the problem might be on X1's where SPL is stock 0.78 ?
Anyways for me it worked finally when I tried hardSPL with RUU to 0.52olinex ("X1_HardSPL.exe" file) on a different PC and cable with a formatted card inserted where 0.78olinex was renamed to kovsimg.nbh (so ready to flash hardSPL with SD method which didn't work befere). The phone was set to bootloader by the program and then started flashing the image on the SD! (the program reported error as usual)
phone flashed it once, restarted, did it again and was ready!
Then I had no problem to flash a ROM with SD method normally
So I don't know what could be the reason it worked or it was a coincidence maybe try to:
WARNING: AS ALWAYS YOU DO IT ON YOUR OWN RISK!
- insert a freshly formatted card with hardSPL file (0.78olinex perhaps) renamed to kovsimg.nbh
- sync with PC and try to hardspl PC way like above and maybe the phone will finally flash the SPL from the SD
- let us know if it worked
It still doesn't work
I used 128m microSD and formated to FAT32, only copy 0.78RUU_Signed.nbh to SD card, renamed to kovsimg.nbh. After I used VOL- and power bottom. It only showed me loading.....
I also tried 0.72, looks same. DID I do some thing wrong?
Thank you very for any response!
wmw6608 said:
I also tried 0.72, looks same. DID I do some thing wrong?
Thank you very for any response!
Click to expand...
Click to collapse
Try the way described above by me (leave the card with the image and use X1_HardSPL.exe to try to change SPL and so force phone to bootloader mode)
Btw i cant boot into windows
only freeze at SE logo
Any solution
kainjinez said:
Btw i cant boot into windows
only freeze at SE logo
Any solution
Click to expand...
Click to collapse
HardSPL and reflash
Try the way described in my post above if u have probles
Agreed I also tried already with the same method
Sent from my LT15i using xda premium
my sd card is visible and also readable on my phone also after i connected it to my pc but the problem is i cannot format it. i did tried format it and on pc, the process work but after i disconnected from pc, i check using file explorer nothing happend still like unformatted (all file and folder still exist). do not why, maybe somebody can help me to solve this. oh ya...i cannot delete the file too using phone and pc,
sundaeproject said:
my sd card is visible and also readable on my phone also after i connected it to my pc but the problem is i cannot format it. i did tried format it and on pc, the process work but after i disconnected from pc, i check using file explorer nothing happend still like unformatted (all file and folder still exist). do not why, maybe somebody can help me to solve this. oh ya...i cannot delete the file too using phone and pc,
Click to expand...
Click to collapse
have you tried formating it from phone menu? If that doesn't work try with this tool
XDRdaniel said:
have you tried formating it from phone menu? If that doesn't work try with this tool
Click to expand...
Click to collapse
i have downloaded and installed it but on my win7 showed message need permission denied, the administrartor rights are required to run this tool. i tried also formatting from phone but still nothing change
sundaeproject said:
i have downloaded and installed it but on my win7 showed message need permission denied, the administrartor rights are required to run this tool. i tried also formatting from phone but still nothing change
Click to expand...
Click to collapse
this same bullsht happens to me too, the best thing to do is to flash stock rom and format sd it easily does it :angel:
DeathMetal King said:
this same bullsht happens to me too, the best thing to do is to flash stock rom and format sd it easily does it :angel:
Click to expand...
Click to collapse
yeah i have the same thought with u, now im using stock xxkpk and i try erase sd card form setting->sd card and phone storage but the result is still the same nothing change. all my files still safe and installable on my sdcard. make me confused
Is there any little switch on your card where u can set either read only or r+w ?