Database Develop

Attempted WM5 Rom upgrade and got stuck!!!

Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx

Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?

I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06

Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.

thanks a lot i ll try it right now been waiting for this

OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you

Error 246 Device not responding

I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.

I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks

wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67

wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!

wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...

Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo

Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...

Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more

thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo

Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)

Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo

fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help

I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk

Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome

I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb

O2 XDAIII Problem WM Cube Updating

http://forum.xda-developers.com/showthread.php?t=371182&page=4
I Downloaded This rom an Than Connectied My PPC To my PC than opened "start_uspl" than it has opened new window I agreed everything and it startied updating There was jus 0% when atcivesync icond make white color and hide and than this rom write me so..
"Error 260 : Connection
The Update Utillity Can not Connect To your PDA Phone. Please chack that your usb cabel/cradle is connected properly between the PC and your PDA phone
Check the following
1.The PDA phone is connected to the usb cable/cradle
2.The USB cardle/cable is connected to the PC
"
I tried it many times but it make me same error Also Tryed Hard and soft reset
Please Someone Help me
I`m Sorry For My bad English
Please Please Please Get Few Time For me

lestera_rpg said:
http://forum.xda-developers.com/showthread.php?t=371182&page=4
I Downloaded This rom an Than Connectied My PPC To my PC than opened "start_uspl" than it has opened new window I agreed everything and it startied updating There was jus 0% when atcivesync icond make white color and hide and than this rom write me so..
"Error 260 : Connection
The Update Utillity Can not Connect To your PDA Phone. Please chack that your usb cabel/cradle is connected properly between the PC and your PDA phone
Check the following
1.The PDA phone is connected to the usb cable/cradle
2.The USB cardle/cable is connected to the PC
"
I tried it many times but it make me same error Also Tryed Hard and soft reset
Please Someone Help me
I`m Sorry For My bad English
Please Please Please Get Few Time For me
Click to expand...
Click to collapse
sounds like your running vista, search for it here, there is athread that will help you.

neilhhardy said:
sounds like your running vista, search for it here, there is athread that will help you.
Click to expand...
Click to collapse
No I Have XP With SP2 by the way my FireWall is turn off

i think it´s an Artemis mobile 6 rom.
you can´t take a rom from an other device.
you have to take a rom for blue angel
(you can find correct roms here:
http://forum.xda-developers.com/forumdisplay.php?f=386)
hope that help
(p.s. don´t forget to update radio first !!!)

Wmvfan is correct, the ROM you linked to is not for a blue angel. You are lucky you were not able to flash that ROM to your phone, you would have had a paper weight if you did.
Read the wiki for information on flashing.

Yes it is right it was another PPC Rom But now I`m not incorrect http://forum.xda-developers.com/showthread.php?t=382909 it is really for my Blue Angel but i have same problem

(p.s. don´t forget to update radio first !!!)
Click to expand...
Click to collapse
that should solve the problem.

Maybe But I dont know how to do that can you give me some tutorial link??? Where I found this Rom There Was not Discripted How To install That

lestera_rpg said:
Maybe But I dont know how to do that can you give me some tutorial link??? Where I found this Rom There Was not Discripted How To install That
Click to expand...
Click to collapse
From the XDA Blue Angel wiki, How to upgrade to the latest Radio ROM version (currently 1.15.00):
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade

P3600 dead? PLEASE HELP!!!

hi guys... i was updating my rom as usual, but during update "image file corrupted" error occured and my p3600 has died. i tried some suggestions from the forum, i tried camera+power+soft reset combination and after that updating the rom again but i stops at 1%. So i tried mtty.exe but it says "cannot open USB port". PLEASE PLEASE HELP ME ... (i use Windows XP SP3)

please guys... there're 220.000 active members here. i'm sure somebody knows the solution for my problem...

try using official rom from HTC website

go to the bootloder screen and then try using official rom from HTC website
best
nat

I have never been able to load images via the USB connection. I just take a memory card, copy the rom image to the root and change the name to RUU_signed.nbh hardboot and it loads. And I keep a original HTC rom to fall back to.

[Q] HardSPL Problem!!!

Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????

did you take out your micro sd card out of your phone?
That was my problem...........

I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard

hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE

tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.

UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!

Moved to X1 Q&A as not Rom Dev

it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?