Related
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
vstarrydr05 said:
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
Click to expand...
Click to collapse
Is download mode still available? If yes your not screwed but your drivers might be.
What steps do you use to get into download mode.... 3 buttons or usb/vol+- combo ?
Yes download mode is available. I used the holding the volume up and down and plugging in USB. It goes to download mode with no issues whatsoever.
Well then this is a non-issue issue... Possibly a bad flash... Go in download mode again and reflash.
Your a bit crying wolf with no reason here. As long as download mode works and Odin detects the phone you have no issue
Use the Odin-one click if you have to ...but really calling it a brick when you have download mode gee-wiz.
Thats the issue. It is not detecting in ODIN. If it was detected I would have reflashed with no problem. I get the message that the USB device has malfunctioned and is not recognized
Try re-downloading the USB drivers - use the ones found in my signature.
If you can get into recovery - you can then get back into CWM and attempt to re-flash again - but you'd still need to 1-click back to stock using ODIN.
Have you tried to plug the usb cable in the Mb directly or changing its port ?
I actually downloaded your drivers last night and installed them. Still not recognized. I can get to CWR and have the zip files for AXURA and Cognition on the SD card. Get errors on various lines when trying to install either. I have tried 3 different cables and 4 different computers with no luck on recognition
Well crap... I did have the USB issue on my work's XP Machine - but when I went home to my Windows 7 box - it ended up finding the phone fine and I was able to flash back to stock.
Any chance you can find a Windows 7 box?
Dont know anyone with one unfortunately. I need to install Win 7 through bootcamp on my mac. I tried to even get it to mount as storage through CWR on it with no success
Well.. I can say with 99% certainty you should be able to restore the phone.. also if you look at my sig - I just added a link to the OTA_JH7.zip that is CWM flashable if you could somehow get the zip onto your phone that is lol.
Hm.. and I dunno how the virtual box of Win7 will run - but it's worth a shot. Windows 7 seems to be superior when it comes to figuring out devices vs. XP. I was shocked when it found my then toasted phone (similar issue your currently experiencing).
Haha, I have your zip to as a matter of fact. I picked it up but I dont know how to get it put on the phone if it wont recognize usb. If CW usb mounting would have working I was gonna put it on the internal sd and let it flash it
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
vstarrydr05 said:
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
Click to expand...
Click to collapse
Duh.. been awhile since I've used MAC - you are quite correct
ok, on the flashing back either rom I get a error on line 10 trying to reflash AXURA and a error on line 12 with Cognition
Hmm. have you tried to do the factory reset from within CWM? I mean at this point.. can't lose anything by trying it.
Yeah, just did the wipe/factory reset through CWR. Still sticking on the same screen
Try this.
-Unplug the phone
-Uninstall all the current Samsung drivers you have, reboot
-Install this one, reboot
-Put the phone in download mode
-Plug the phone
Does windows install the drivers? If not continu
-Open Windows Device Manager and do a plug&play search
-If you have a ? device select it
-Right click/Update Drivers
-Select automatic...... if windows finds nothing return and select Manual.
-Choose the "Samsung ADB composite device" driver and install
Is the install successful ?
-Now unplug the usb cable
-Open Odin
-Plug the usb cable
Does Odin now see the phone ?
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
ronf1011 said:
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Why would you brick a working phone based on a driver issue ?!
That's like blowing your car engine cause you can't communicate with onboard electronics........ unreal
Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
banttu said:
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Click to expand...
Click to collapse
banttu said:
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
Click to expand...
Click to collapse
try uninstalling the drivers for your phone on the pc.
factory reset your phone.
Does it recognise in odin when in download mode?
The same issue. I have Ultibread 1.4 and wanted to flash the JVK but windows keep disabling it. Can't find the device either in normal state or in download state. Odin also didn't recognize it
I'm on win7 x86
Did a factory reset - still the same
I tried different cables and PC's - no luck Anyone !! Any idea?
nightrave said:
I tried different cables and PC's - no luck Anyone !! Any idea?
Click to expand...
Click to collapse
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Didn't help in my case. I did the backup and wipe/factory reset the phone. Enabled the debugging mode, removed kies and all the drivers, rebooted the phone and the pc, connected the phone to pc and had the same message Any idea where I could got it wrong?
P.S. ANd the phone is now extreeeemly laggy and unresponsive
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
nightrave said:
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
Click to expand...
Click to collapse
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
banttu said:
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
Click to expand...
Click to collapse
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
nightrave said:
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
Click to expand...
Click to collapse
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
banttu said:
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
Click to expand...
Click to collapse
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
nightrave said:
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
Click to expand...
Click to collapse
Well, there seems to be only a one solution.
You have to uninstall the phones drivers, and install them again.
Then plug your to your computer in download mode and it'll install rest of the drivers.
Then Odin should be able to recognize your phone and your good to flash stock.
But you really, really have to uninstall the drivers
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
nightrave said:
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
Click to expand...
Click to collapse
Hmm.. I did change the computer.. Maybe you should put the drivers on a flash drive and go to your friends computer to flash.
The thing is that he does not have the drivers installed before either.
Don't know why it worked for me but... it worked.
I am going to try the last thing - I have a System backup from the time I definitely didn't have them on the PC and see if this helps....
Nope.... Didn't help.... I am completely desperate. Maybe anyone would have another magical solution?
Guys! ANy idea? Plzzzzz. I'd do anything to get it back to life
Me too i get "unknown device" when attached with usb in download mode...ive been trying to get it back workin for a week now...tried everything...which means i can't flash it to gingerbread
Anyone got any ideas ?
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
nightrave said:
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
Click to expand...
Click to collapse
Hi!
I have a similar problem.
For few days, I cannot connect my SGS to my Notebook.
I have windows 7 x64 installed, and it has never had any problems with connections.
Now, I don't know why, but I cannot connect it.
I tried to connect it to another computer, which has windows 7 x86.
And it was succesfull!
Now, it seems, that I don't have a hardware issue, but I cannot imagne, how I could solve this problem.
I already tried these:
- remove drivers/programs
- tried other USB slots
- downloaded newer USB driver for x64
- removed USB drivers (all of them)
- unplugged my notebook for over 5 minutes (also removed the battery)
Every time I plug my SGS to my PC only this message appears:
"unknown device" - or something similar, because I have a hungarian windows 7.
Sorry about my english.
Has anyone any idea?
Thx for advance
Hi there.
I recently flashed the OmniROM to my i8190, but since it got several issues, after two weeks i decided to flash stock ROM.
So i enter TWRP recovery and wipe all data on the smartphone, but then my computer crashed and lost the VM that got Odin and drivers etc. so in a new VM i decided to try to flash, but now i can't.
Odin doesn't recognize my i8190, i thought ADB sideload could do the trick following this guide http://forum.xda-developers.com/showthread.php?t=2559200but all i got was:
error: device not found
Now i ended up with a pretty brick hahaha.
How can i flash a ROM ..ANY to my phone.
I got another i8190 so i installed the drivers from it to the VM, all except the MTP device, that got error.
I also installed SAMSUNG drivers, but nothing, ... i'm kind of losing it now hahaha.
Can someone helpe me flash this thing?
a) I CAN enter TWRP Recovery
b) I CAN enter Download Mode
c) Don't know if Odin doesn't pick it up since USB Debug i presume it's not on, but then again, since no OS is installed, i don't know how to turn it on from recovery or something like it.
zenneka said:
Hi there.
I recently flashed the OmniROM to my i8190, but since it got several issues, after two weeks i decided to flash stock ROM.
So i enter TWRP recovery and wipe all data on the smartphone, but then my computer crashed and lost the VM that got Odin and drivers etc. so in a new VM i decided to try to flash, but now i can't.
Odin doesn't recognize my i8190, i thought ADB sideload could do the trick following this guide http://forum.xda-developers.com/showthread.php?t=2559200but all i got was:
error: device not found
Now i ended up with a pretty brick hahaha.
How can i flash a ROM ..ANY to my phone.
I got another i8190 so i installed the drivers from it to the VM, all except the MTP device, that got error.
I also installed SAMSUNG drivers, but nothing, ... i'm kind of losing it now hahaha.
Can someone helpe me flash this thing?
a) I CAN enter TWRP Recovery
b) I CAN enter Download Mode
c) Don't know if Odin doesn't pick it up since USB Debug i presume it's not on, but then again, since no OS is installed, i don't know how to turn it on from recovery or something like it.
Click to expand...
Click to collapse
Try another usb port and/or another usb cable. Also make sure that nothing with kies is runnung in background if you happens to have that installed.
When you connect with adb, also take a look on your phone screen if it asks for authorization to connect.
You got both download and recovery so problem is with connection/drivers.
zenneka said:
Hi there.
I recently flashed the OmniROM to my i8190, but since it got several issues, after two weeks i decided to flash stock ROM.
So i enter TWRP recovery and wipe all data on the smartphone, but then my computer crashed and lost the VM that got Odin and drivers etc. so in a new VM i decided to try to flash, but now i can't.
Odin doesn't recognize my i8190, i thought ADB sideload could do the trick following this guide http://forum.xda-developers.com/showthread.php?t=2559200but all i got was:
error: device not found
Now i ended up with a pretty brick hahaha.
How can i flash a ROM ..ANY to my phone.
I got another i8190 so i installed the drivers from it to the VM, all except the MTP device, that got error.
I also installed SAMSUNG drivers, but nothing, ... i'm kind of losing it now hahaha.
Can someone helpe me flash this thing?
a) I CAN enter TWRP Recovery
b) I CAN enter Download Mode
c) Don't know if Odin doesn't pick it up since USB Debug i presume it's not on, but then again, since no OS is installed, i don't know how to turn it on from recovery or something like it.
Click to expand...
Click to collapse
Try this :
If you have an external sdcard in your s3 mini then :
1. remove it and put it into a other phone
2. download a ROM and move the ROM what you downloaded to your external sdcard
3. Put the external sdcard back to your s3 mini
4. Go to recovery and choose "install from external sdcard"
5. And intstall the ROM
6. Done! You have a OS again.
It's very easy and if you don't have a external sdcard then you have a big problem bro
shelves mmerese
xXPR0T0TYPEXx said:
1. remove it and put it into a other phone
Click to expand...
Click to collapse
If you have an adapter (micro SD to SD) then you should be able to insert the card into a card reader. This will probably be easier than trying to find another phone.
MarisPiper said:
If you have an adapter (micro SD to SD) then you should be able to insert the card into a card reader. This will probably be easier than trying to find another phone.
Click to expand...
Click to collapse
Yeah i did this, but no luck at all.
Finally i change the usb driver, installed Kies again and voilá! Odin picked up the phone and flash were on .
Thanks to all.
Glad you've got it sorted.
I've noticed my PC wants to install drivers for the phone almost constantly. Every small change seems to result in a change of driver. It can be frustrating.
MarisPiper said:
Glad you've got it sorted.
I've noticed my PC wants to install drivers for the phone almost constantly. Every small change seems to result in a change of driver. It can be frustrating.
Click to expand...
Click to collapse
due to windows updates this should be expected that certain third party software like the drivers would need updates
so that leaves two choices
either keep your stuff up to date
or
get left behind and drowned in problems
I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
herculesPh said:
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
Click to expand...
Click to collapse
Thank you for your reply but it seems you didn't read my post. My phone is not recognized by any pc.
What is the terminal command to restore a backup? That's pretty much my last ditch effort.
Well I broke my recovery so I'm screwed. I contacted Samsung and they said they would service it for free. Wish me luck.
What would cause the phone to stop being recognized by the PC? I narrowed it down to the MTP software or the micro usb charge port. My Windows computer says Device Descriptor Request Failed. Linux box does nothing. No USB devices are listed when I run lsblk.
weinerwad3000 said:
I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Click to expand...
Click to collapse
you can try this code and test if it work
*#0808#
Familiaaa said:
you can try this code and test if it work
*#0808#
Click to expand...
Click to collapse
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
weinerwad3000 said:
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
Click to expand...
Click to collapse
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
jubei79 said:
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
weinerwad3000 said:
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
Click to expand...
Click to collapse
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
jubei79 said:
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
Click to expand...
Click to collapse
I've tried 4 different cables. My wife's S5 works perfectly fine on all computers. I have tried in Windows 7, 8, 8.1, and 10. I've also tried in Linux Mint. It used to work until I installed MOAR Rom. Windows says Device Descriptor Request Failed. Linux doesn't do anything when hooked up. lsblk doesn't show the device either.
I have a bit of an update. Apparently something happened with all my data cables. I hooked up my wife's phone the other day and I was all of a sudden receiving the same error as the note 5. I went out and bought a new data cable and now her phone connects again. I'm waiting for the Note 5 to charge up so I can try Odin. I'll post back my results.
I apologize to those who told me it was the cable. I just didn't see that it was conceivable that all 4 of my data cables were all of a sudden damaged. Never underestimate the ability of children to destroy every working cable you own.
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
weinerwad3000 said:
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
Click to expand...
Click to collapse
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
musab_bari said:
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
Click to expand...
Click to collapse
I ended up trying to replace the port and accidentally cut the ribbon for the LCD screen. Ended up getting a new phone.