Freezing all the Time... - Touch CDMA Android Development

I've been using Incubus26Jc's Froyo v. 12 and My Vogue has been freezing over and over all the time. Seems not to be app specific, and seems to happen when its charging and when its on battery.
Any chance I've got a setting wrong? My guess is that my phone is dieing. Any advice?

I've had this problem on the earlier versions, but now on release 12, I have only had 2 freezes... Sometimes you just have to let the phone sit. I guess it kinda gets overwhelmed and needs a little rest :/

Is my situation the same? I'm running SagaROM Froyo Ultralite [v1.2.1, 7/28/10] and every time the screen goes to sleep and goes into lock mode, it reboots. What can I do to fix this? Please & thank you!

deltagamer said:
I've had this problem on the earlier versions, but now on release 12, I have only had 2 freezes... Sometimes you just have to let the phone sit. I guess it kinda gets overwhelmed and needs a little rest :/
Click to expand...
Click to collapse
i have to agree my phone was doing this all day today, after using gps and apps heavy
rebooted a few times and let it sit for a while working much better now

evilclosetmonkeynate said:
i have to agree my phone was doing this all day today, after using gps and apps heavy
rebooted a few times and let it sit for a while working much better now
Click to expand...
Click to collapse
Try going back to RLS10.5 with the 15-07-2010 version of Zimage. That eliminated the freezes for me. And it seems a lot faster.

evilclosetmonkeynate said:
i have to agree my phone was doing this all day today, after using gps and apps heavy
rebooted a few times and let it sit for a while working much better now
Click to expand...
Click to collapse
Try going back to RLS10.5 with the 15-07-2010 version of Zimage. That eliminated the freezes for me. And it seems a lot faster.

Thanks @richardk3 ... I have the NBH, but I didn't save the 10.5 install file. Anyone have a link?
Update: Searching the forum didn't find it but a Google Search did: http://www.mediafire.com/?ond2tmmzolggtmm

If you search the main Froyo thread, incubus put up a link to the archive of recent releases.
I went back to RLS10.5 and the 7/15 zImage per richardk3's suggestion. At first I did notice less freezing and overall better performance. But then I made a long call (over 5 min) with BT headset and the phone became unresponsive. BT and the call were still working fine, but the phone was unresponsive and had to be reset at the end of the call.
This is pretty consistent across all builds in Eclair and Froyo. I've reached the point where I basically accept that this is always going to happen and I'll need to reboot. It's worth the trade-off, though, since this build is so amazing and Android is so much better than WinMo.

Johndixon, if you're running from nbh then you may need to clear the dalvik cache from the boot screen menu. Worked for me when the freezes came fast and furious.

jstrom23 said:
I went back to RLS10.5 and the 7/15 zImage per richardk3's suggestion. At first I did notice less freezing and overall better performance. But then I made a long call (over 5 min) with BT headset and the phone became unresponsive. BT and the call were still working fine, but the phone was unresponsive and had to be reset at the end of the call.
QUOTE]
I'm having the exact same problem... always becomes unresponsive at the end of the call when using Bluetooth. I've tried combinations of RLS10.5 and RLS12, and a couple of zImages.
Other than this, it's super fast and stable... But it would be great to figure out what is causing the freezing.
Click to expand...
Click to collapse

eugene2007;7515857
I'm having the exact same problem... always becomes unresponsive at the end of the call when using Bluetooth. I've tried combinations of RLS10.5 and RLS12 said:
I'm having the same problem without using Bluetooth.
Can you gather the debugging info that DZO needs, as described here:
http://208.100.42.21/showthread.php?t=712310&page=180
Click to expand...
Click to collapse

Related

new rom

Have any of you seen this thread by Cornflipper at PPC geeks? :
http://forum.ppcgeeks.com/showthread.php?t=109527
I just took the plunge and flashed, I hope this is legit, well if not.... that is what insurance is for right? lol
So, I flashed it and it seems to be a little more stable, it has a new sys and new Radio..... I hope it turns out to better than stock, it will make waiting for the HSPL a little eaiser.
Flashed the new rom last night basically for the new radio ( 2.25 ). I ran it for a couple of hours before I put Sense 2.5 2011 back on it. The radio is better where I live ( I got an extra bar at home ) and the calls seemed a little clearer with more volume. Data and sms seem smoother and the rom seems a little faster and smoother. I do like it better .
After having this rom on for a day or so , the the thing that really sticks out is that there is virtually no memory leak , I can't believe it ! My free memory has been at 52 - 56% all day . Was worth the flash.
I jumped on this and I have to say, I'm really happy that I did. The device is notably more 'snappier' than it was. I never really had much of a memory leak problem, but I'm seeing slightly less memory usage than I typically do.
No problems at all updating, either. The installer that was posted on the first post of that thread worked out of the box for me, painless and easy. Just a re-sync to get my contacts back and some reconfiguration was all that was required. Cornflipper is my hero
One thing I noted that I like, and maybe it was there in the stock ROM and I just missed it during setup, was the ability to set the multimedia button to launch the TouchFlo Music tab. While the music app still seems pretty laggy/slow with a 10GB library on a storage card, being able to use that button makes me happy. If only I knew how to set the volume granularity under TouchFlo. (WMP still makes a better MP3 player mode for now IMO)
Not sure about battery usage, I went down to 90% pretty fast, but I've been downloading/reinstalling a bunch of things. Radio does seem to stay 3G instead of 1X better than it did as well.
I recommend. Nothing appears to have gotten worse.
edit: It also seems that the data connection will turn itself on by default now after soft-resetting the device, which is new for me. It was always OFF for me unless I turned it on manually. Data conn still dies when powering the phone off, though. I've had issues with data crapping out randomly, maybe that will be fixed too, but haven't had the ROM long enough to know one way or the other.
edit 2: I thought I took a major hit in battery life today, without even using the phone for anything it was down to 50% after being unplugged for 9 hours. However, it also charged back to 100% in about 15 minutes, so it looks like flashing the ROM messes up the battery gauge again. Using my original trick of charging, unplugging, charging, unplugging ... until it just won't charge anymore. Worked when the phone was new
I highly recommend it!
I have to agree with the concensus over at PPCGeeks . . . this rom ROCKS!
One of the bigest things for me is that A2DP starts automatically now. When I get into my car and start one of my Podcasts, it imediately plays through the car stereo; I don't have to go ino the BT settings and start it!
The memory leaks seem to have been fixed for the most part - it starts at 52% after a restart and only creeps up a bit from there. I also see far moe 3G coverage than with the old ROM.
I can't say that I have noticed any battery improvement though . . . but it is certainly no worse!
If you haven't updated yet . . . what are you waiting for?
BRosenow said:
One of the bigest things for me is that A2DP starts automatically now. When I get into my car and start one of my Podcasts, it imediately plays through the car stereo; I don't have to go ino the BT settings and start it!
Click to expand...
Click to collapse
BRosenow... did you do anything to get it to start automatically? I'm not that lucky. Also, is your BT sound of poorer quality? Mine sounds kind of crappy and I think it's the phone b/c my old phone sounds pretty good. Any thoughts? Thanks!
Official ROM available on PCD Phones
The official ROM is available on PCD Phones website. I'm going to assume it's the same.
http://www.pcdphones.com/view_phone_details.aspx?mcode=XV6975&bID=136&sAct=0
coolpoete said:
The official ROM is available on PCD Phones website. I'm going to assume it's the same.
http://www.pcdphones.com/view_phone_details.aspx?mcode=XV6975&bID=136&sAct=0
Click to expand...
Click to collapse
Yes, it looks like it is the same. the name & versioning are identical.
just flashed this and its alot faster and i have full bars now where i live!!! thanks
laserbeme said:
BRosenow... did you do anything to get it to start automatically? I'm not that lucky. Also, is your BT sound of poorer quality? Mine sounds kind of crappy and I think it's the phone b/c my old phone sounds pretty good. Any thoughts? Thanks!
Click to expand...
Click to collapse
No, I didn't do anything special . . . in fact I noticed it by accident. Since this was a problem with the previous ROM I stopped using it, but one day I just started playing a PodCast when I got into my car and it played through the radio. I was pleasantly surprised!
I can't say that I have noticed that the sound quality is lower (I mostly listen to spoken-word Podcasts, so quality is not a big issue), but I do notice a half-second pause from time to time. It's a bit annoying, but not a big deal considering what I'm listening to - if I was listening to music I imagine it would be VERY annoying!
Installed - but WORSE memory mgmt?
rachbu said:
Yes, it looks like it is the same. the name & versioning are identical.
Click to expand...
Click to collapse
So I upgraded to the latest and greatest and have seen worse behavior in memory management. I used to be able to go a number of days without rebooting, now memory shoots from 58% upon boot to 70% in a few minutes. Exact same applications installed, nothing new but the ROM.
I've also had strange issues where the phone doesn't always ring -- screen lights up, but no ringtone.
Anyone else see new issues since upgrading?
More oddities with the new ROM
FYI: I also manually put my phone into Vibrate mode...it somehow went back into Automatic mode without my knowledge / intervention (which also disrupted a meeting I was in when my alarm went off). Not sure if this is because I was using ActiveSync at the time...but this new ROM is IMHO not nearly as good as the stock one.
ROM is official via Verizon Support Page
Looks like Verizon has made this official. If you go to the support page on Verizon.com and click on software updates, it takes you to:
http://www.pcdphones.com/phone_downloads.aspx?bid=136&cid=1&mid=364&carrier=Verizon Wireless
I took the plunge two days ago and upgaded to this new ROM. Wow, what an improvement! Maybe it's my imagination, but the device seems to run faster, the touch screen seems more accuate, expecially when typing and cell reception is better.
honestly...
and no disrespect to those who DID notice an improvement, but after flashing to this updated ROM and using my device as normal, i don't see any difference at all.
Sure, they fixed that issue when you first restore your sms database and it takes FOREVER to re-thread your messages...but now, i just see that they "fixed" it by stopping my restored messages from re-threading at all. so much for that..
In need of help
Collegues, can some one provide me with a direct link to download a (the best) custom ROM? I’m having a hard time trying to find one. I’ve read about a couple of’m but there’s not a direct link you can click on to download it. HELP PLZ!!!!!
If you want I cook new ROM for this Device
02Luis02 said:
Collegues, can some one provide me with a direct link to download a (the best) custom ROM? I’m having a hard time trying to find one. I’ve read about a couple of’m but there’s not a direct link you can click on to download it. HELP PLZ!!!!!
Click to expand...
Click to collapse
For me, the Energy ROM is the best balance of performance and functionality. He provides several options and updates the ROMs frequently as new .cabs become available. The download links are in one of the first few posts in this thread:
http://forum.ppcgeeks.com/showthread.php?t=113971

Did froyo fix the crazy screen bug?

Is it me, or did froyo fix the "crazy screen" bug? I also noticed that my phone doesn't get as hot when it's been charging on my car dock.
I'm running FRF50 since it was released. The screen issue is long gone. I use to have it a couple of times a day. I sometimes get it but that's once a week.
lorin.bute said:
I'm running FRF50 since it was released. The screen issue is long gone. I use to have it a couple of times a day. I sometimes get it but that's once a week.
Click to expand...
Click to collapse
This, and I'm on FRF85B
Gotta be the best part of froyo for me, crazy screen bug fix, flash player, Jit compiler.
Which crazy thing happening are you guys screaming about? Are you talking about when the touchscreen would begin to register touches in the wrong place until the screen is turned off and on again?
Yeah that's what they are talking about. But the bad news is this problem still exists. I've had it happen many times on froyo. It's not gone at all.
RogerPodacter said:
Yeah that's what they are talking about. But the bad news is this problem still exists. I've had it happen many times on froyo. It's not gone at all.
Click to expand...
Click to collapse
Funny thing is that I had those issues on an AT&T-banded phone and they have gone way downhill since Froyo.
I find the granularity/preciseness of the screen better, and more responsive when, for example, you are dragging left-to-right and you start dragging up-down. However, I only do this in the browser so it could be down to better browser performance and/or JIT?
Still have screen uncalibration issues but seem to be better in 85 than 72
Does indeed seem to be a thing of the past, and on a similar note, it's improved the capacitive button accuracy as well.
Good that they've done it, but now I keep hitting them in the wrong place.
I'm using FRF91. Crazy screen bug happens with me twice a day. I don't know what I do to go away, but after a few minutes it stops by itself.
Ok I have been noticed a new problem for the past few days where the screen did not response at all when I turned on the phone. I cannot slide the unlock bar to unlock it. I had to turn it off and on again for one or two times to make the screen response again. Anyone else having this same problem?
Crazy screen occurrence definitely reduced.. however, it still happens when phone heats up significantly.. say, on a dash board while navigating. It's most definitely heat-related... so it must be hardware =(
I'm running Geo's FRG83 and I get it quite a bit when using Skype. I've seen this problem from the beginning and haven't seen a reduction in this issue with later versions of Android. It is the only problem I have with Android/N1.
vzontini said:
I'm running Geo's FRG83 and I get it quite a bit when using Skype. I've seen this problem from the beginning and haven't seen a reduction in this issue with later versions of Android. It is the only problem I have with Android/N1.
Click to expand...
Click to collapse
I've had the N1 since day one and never had this bug. But I don't use Skype...

[Q] Any luck with designgears JH7_OTA.zip?

Before taking the plunge I am looking for success/problem comments from those who have failed with OTA and then tried the JH7_OTA.zip approach.
I have searched and I don't see many comments yet.
It flashed fine for me but now GPS is causing my phone to lock up. Happens if I turn off GPS and just now happened in google maps while driving. Had to pull the battery to reset.
Worked great for me. GPS is working like a champ too.
Thanks to all who worked so hard on the flash.
I updated with the JH7_OTA.zip and it went well, but my phone is worse than before... laggier, bottom buttons seem less responsive (could be due to the increased lag) and the GPS will not see any satellites and much less, lock. I'm sure it's not the file... just another defective unit. This is my fourth Captivate. First two simply lost the ability to connect to 3G and WIFI, the third had a great GPS but the search function would randomly self activate and the body creaked like an old rocking chair, and my current one.
bigdoug2005 said:
It flashed fine for me but now GPS is causing my phone to lock up. Happens if I turn off GPS and just now happened in google maps while driving. Had to pull the battery to reset.
Click to expand...
Click to collapse
This happened to me. You don't need to pull the battery. Just hold the up volume button and power button for about 10 seconds and the phone will shut off.
Edit Disregard my post.
It's working great for me. I usually stream radio during the day and it usually will drop out once or twice an hour. Today, it has been streaming just perfectly with no dropouts. Thanks to all of those that got this working!!!!
No problems here, either. I did remove my previously installed LagFix first, and I flashed over JH3. GPS seems to track me a little better than before, and it does seem that perhaps the radio is working a bit better and battery life is slightly better as well.
I have the same commute on the train each morning, and pretty much do the same routine each time, so that's a good way for me to compare things after a change. This morning I noticed that my streaming radio barely cut out at all in areas where the signal is low, much less than before, and when I got into work my remaining battery PCT was a little better than usual. I applied the RyanZ lag fix from the market this afternoon and overall am pretty happy so far!
My GPS is still jacked up.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Worked great for me. everything working including the 3 button, usb, and better gps/compass. Things other people were complaining about not working. I flashed odin and rooted with update.zip before i applied this rom.
luck? Sure... but...
I went with the Cognition ROM as JH7_OTA didn't do the trick for me.. All in all I like the Cog experience (install went smoothly, seems fast, no weird errors), but the GPS is definitely not fixed. Accuracy is better in that my phone can locate me on the neighborhood level, but it is still not locking and is locating me blocks away from where I'm actually at.
Worked great for me.
No problems flashing for me. That is the answer to your question, now to issues I had.
HSUPA was not working for me. So I did the revert HSUPA to get 3G back and it killed all data for me. So I did a nandroid back to my previous ROM and then I got FC so I had to Odin and then reinstall my nandroid. That is why I don't like his zip, it works fine but if you want to change ROM's you have to basically flash odin to make sure you have no issues. That is how it was for me, others might be different and then you have the nut swingers who are only for Cognition.
I will say this issue happened to me 3 times. I think the issue might stem from being unable to remove voodoo since it is packaged into his zip. Not positive why I had the issue but for the time being I am trying other alternatives.
Last edit: Just went back to his Cognition thread and see that he pulled the HSUPA zip, so it wasn't just me having issues. Unfortunately stuff like that lets me know that all in one package zips like that need to be worked on more.
flashman2002 said:
I will say this issue happened to me 3 times. I think the issue might stem from being unable to remove voodoo since it is packaged into his zip. Not positive why I had the issue but for the time being I am trying other alternatives.
Click to expand...
Click to collapse
you probably should have removed the voodoo lagfix to try to flash other roms since clockwork DOES NOT work with voodoo
alternatively you can install cognition, and install a different kernel if you dont want voodoo lagfix...
flashed it and it's great! except the gps is kind of on and off.

NeoFroyo!! Well testing

hey guys!
Well i was trawling the android forums and found this!
http://www.neopeek.com/viewtopic.php?t=7524
All thanks yo neopeek for the rom.
I decided to test it out on my kovsky. This coupled with I believe duckkly's kernels worked like a charm!! ill post the kernels up here too as I experimented with quite a few to see what worked best!
Battery life: 8 hours on full blast so i rekon around 11 on normal usage
Wifi: never ever ever dropped on me so far! thou it does seem to be weak in some places around my house where i usually should be getting more signals and strong at places where i get little signal :S.confusing
phone: well calls come in and stuff but sometimes ull see a black screen and cant see who's calling! :S
Bluetooth: paired with my mw600s just fine dont know about file transfer
market:works just fine a bit slow though..could be my internet speeds out here in pakistan.
Apart from that using whatsapp like a charm. facebook apps. gaaps everything works!! not a single sod to date been using it for around about 5 days or so.
Sorry for the spelling errors! big thanks goes out to neopeek and duckkly or whoever compiled those kernels !
PS: oh and the keys will freeze up as you hit around 20% battery. I simply reboot. Also terminal doesnt seem to be working. keeps crashing on me but i dont really ever use it in daily use so it seems to be pretty stable apart from these flaws. Also you'll need to reinstall quickpic from market
Also im on radio 1.16 i believe. 1.14 seemed to drop calls randomly.
please read all of neopeek's instructions before flashing ! happy flashing
can't confirm 20% battery being the point where keys stop working. for me 4 hours of uptime seems the be magic point...
i stopped restarting modules via script (how to has been explained many times in here) and simply restart. most of the time it happens when an app is running - now what good is it if you have a shortcut somewhere, but can't get there because back- and home-key isn't working?!
but yeah, neofroyo is a big step forwards. first time using android on x1 is fun!
for terminal to work you have to reinstall it just like quickpic.
i just hope we'll see some kernel-update soon. without it the whole thing is pointless.
lol truee..thanks for the terminal update. oh if u press the camera button it will take you back to your home screen. than i guess u could load the keyboard modules..annoying i never bother with it. try my combination of kernel it gives me decent battery lifee but yea its the kernel with all the problems. tried the new kernels but they dont seem to work properly
hm, which kernel-version is that?
might try if i know which it is. just had to step down from ygge-monster to ygge-turbo. monster made my touchscreen getting unprecise in left half.
thx for the update with cam-button - never bothered to press that, since camera doesn't work anyway.
yeah, new kernels suck for our device, especially since they're missing the specific battery-driver for x1. the only guy still working on x1-kernel has been silent for months, but i can see he's still at it (porting 2.6.35.7).
Just tried pressing cam-button.
Falls back to lockscreen, after unlock shows homescreen. But system is frozen and after some time reboots directly to android. But lots of stuff doesn't work, especially phone-stuff. So i have to reboot winmo anyway.
Sent from my X1i using Tapatalk
i think its the ducckly's keyboard not loaded as modules turbo verison. I believe it should be that because i remember the msm drivers werent really working properly on it
Sent from my Transformer TF101 using Tapatalk

Invisiblek's 4.4 12-30-13 Nightly Impression

I can't post this on the Milaq thread (where most of the invisiblek discussion is) so I thought I would post it here to give anyone else a heads up.
The Good:
It's a fairly stable kernel and all my apps run seemingly just fine. I mean I've only been running it about 5 hours but not a single FC. I did have a weird bootup glitch that locked it up right away after install but after that I loaded all the apps just fine. Super exciting to see it so far!
The Bad:
Screen pixelation/tearing from left to right, especailly on grey backgrounds. Something is up with the video driver/gpu voltage. Certain icons like the Settings sprocket will have a few pixels that will flash and other times you'll see lines all the way across the screen. It might be color specific. I was playing Quadropus Rampage and never noticed it but then went back to the home screen or typing an e-mail and it's very much there.
Pandora plays music fine. If you turn off the screen while playing, horrific things happen like ZZZZZZZZZZZZ and then hard lock. I didn't like that station anyway..
The "OK Google" voice command doesn't seem to work though voice typing does. I'm pretty sure this worked on the Milaq build of the same date.
It's a bit slow and CPU is stuck to 1188. There is a bit of a lag switching apps but I don't notice any core functions slow.
The Different:
The home button doesn't wake up the TP. Only the power button.
Can't say anything about battery life quite yet but I'll keep a gander on it. Battery hasn't been a super concern of mine because I plug it in ever night
The Different:
The typical 15 second reset switch mult-button key is more like 3 seconds now. I like this a lot better.
Positive:
--backup and restore work
--it is getting much better.
Negatives:
--Microphone does not work, so I could not use any vioce search or voice dialer/sound recorder.
--Free game "F.S. Xtreme" has black box issue.
--Youtube still has reboot issue.
--TV streams app "syncbak" has similar reboot issue.
My wifi keeps shutting off and won't restart without reboot. Not even sleeping. Other than that it runs nicely.
Switched to milaq's 3.0 kernel.
The CPU is pre-configured to run at much higher 1.5Ghz, yet the 3.0 rom is still able to run very stable.
I am waiting for camera fix to enable video calls.
Since both 3.0/3.4 rom are using the same CWM, it makes 3.0/3.4 rom switch very easy.
Waiting on Flintmans as it is the only non data media rom. Not a big fan of all the repartitioning. For several reasons. Good to see choices still available. God bless the developers for all their time and effort. Wish I could do what they do.
goog888 said:
Switched to milaq's 3.0 kernel.
The CPU is pre-configured to run at much higher 1.5Ghz, yet the 3.0 rom is still able to run very stable.
I am waiting for camera fix to enable video calls.
Since both 3.0/3.4 rom are using the same CWM, it makes 3.0/3.4 rom switch very easy.
Click to expand...
Click to collapse
I flashed 3.4 rom (0103) over 3.0, and tried briefly.
--3.4 rom seems running OK, except it runs relatively slower at 1.1Ghz.
--camera is not working on both 3.0/3.4 rom.
--Free game "F.S. Xtreme" seems not compatible with 3.x kernel. It also cannot run on Samsung S3.
Moody66 said:
My wifi keeps shutting off and won't restart without reboot. Not even sleeping. Other than that it runs nicely.
Click to expand...
Click to collapse
Turn off WiFi Optimization in settings.
EbolaCola said:
Turn off WiFi Optimization in settings.
Click to expand...
Click to collapse
Still does it. Did that soon as rom booted as per the Op.
Moody66 said:
My wifi keeps shutting off and won't restart without reboot. Not even sleeping. Other than that it runs nicely.
Click to expand...
Click to collapse
Same here. Also double check that the setting took. I swear I unchecked it and it went back or didn't take the first time. Perhaps give it a toggle or two. I also noticed that if wifi turns off, it won't turn back on.
Anyone else having a problem with rebooting from within CM and it just goes to a blank screen?
Dirty flashed to the 1/5 nigthly. Reboot issues seems gone now, or just that a reflash has fixed mine specifically.
Just noticed that there is an official thread over at http://forum.xda-developers.com/showthread.php?t=2592909
Hopefully I can post there too!
sokratz said:
Just noticed that there is an official thread over at http://forum.xda-developers.com/showthread.php?t=2592909
Hopefully I can post there too!
Click to expand...
Click to collapse
Negative on the posting. I'm still seeing the bzzzz when the screen shuts off while playing music. Have disabled the mic (I think). Curious that nobody on that thread has reported that quite yet.
I'm very excited to see all of this development on our old TPs! I'm currently running Milaq's latest 3.0 kernel test build. It is running almost perfectly for me! I cannot wait for 3.4 to finish getting smoothed out. I've tried Invisiblek's builds out, and they currently seem a little laggy compared to Milaq's 3.0 test build. Great work all around though! Thanks to Invisiblek, Flintman, Milaq, JCSullins, Dorregary, and all of the others that I haven't mentioned who have contributed so much of their time and skill toward keeping our Touchpads relevant, even competitive with the current crop of tablets on the market!
Sent from my TouchPad using Tapatalk 4

Categories

Resources