Database Develop

[Q] how to get market

I just put cm7 on a sd and am running it on my NC. how do I get the market on it? I saw one link but don't understand how to do it.

If all you want is the market, you can download the newest market APK from my webserver. The link is:
http://www.r00tyou.com/android/tools/Vending(new).apk
To push it to the device simple connect the device to your computer using ADB and type the following in the console:
adb devices
adb install \path\to\the\downloaded\apk.apk
Click to expand...
Click to collapse
Wait for it to successfully transfer over and install.
The viola, you have the newest market APK.
However, I suggest that you download the newest GAPPS from the cyanogen website and push over the whole gapps.
To do this, simply download the latest GAPPS from here:
http://wiki.cyanogenmod.com/index.php?title=Latest_Version#Google_Apps
Again, using ADB type the following commands:
adb shell mount -o remount,rw /dev/block/mmcblk0p5 /system
adb push [the path to your SDK tools folder]\system system/
adb reboot
Click to expand...
Click to collapse
The console will show the progress of what apps are being transferred over and installed. Once it is done rebooting it will prompt you for logging in to your google account to setup your device. You can simply skip this (Tapping in each corner of the screen starting from the top left going clockwise) or you can proceed with the setup process.
Hope that helps

Thanks for the info. It took some doing because I haven't written code since DOS.

Thanx alot man i had the same problem and this worked perfecty

Not sure if it's important since /system/ is mounted ro anyway but all apps in /system/app/ have 644 permissions, pushing files with adb (whether in linux or windoz) will give them 755 permissions defaultly, so I usually do a:
chmod 644 [app-name].apk
after I transfer the file. Might be a good idea to do this if you are remounting it a lot.
Cheers,
Mike
PS. Themed Markets :-D

[Q] adb install -r error

on CM7 nitely #64 w adb install issue:
adb install -r ${apkName} --CORRECTED THIS CMD WORKED FINE --
Above should replace. But I find that in order to force new app version that i have to do the following:
adb uninstall $PackageName
adb install ${apkName}
and that the first cmd ( uninstall ) deletes any sdcard data and any mySqlData bound to the app. It makes PIA to do alot of test cycles cause every time that the app cycles , you need to run a script to replace all the data.
My question ...
why isnt install -r actually doing a replace of the app?
Process Mgr does NOT show the app running. I dont know if its background cached or something. I always seem to pick up the old app version when i try to use 'install -r '

ADB Shell not working, but my N1 isn't bricked

I wanted to use USB Tunnel to share my PC's internet connection with the phone, but I got the error:
Code:
- exec '/system/bin/sh' failed: No such file or directory (2) -
I tried to install other APK's through ADB and they also failed, so I googled this error and I saw that the main issue is a failing ADB Shell. I tried to open Shell and I got the same error. The difference between me and the other users is that my phone is booting as usual, USB Mass Storage works, the phone is detected by fastboot- and adb devices commands and everything is working as intended, except for installing APKs through ADB/opening Shell.
Here is my phone's current config:
MeDroidMod 1.4.4 w/ HWA
Latest Tiamat kernel
TexasICE HBOOT w/ 210/8/218 partition layout
4GB microSD card...I don't know the filesystem but it's definitely NOT ext4, so there's not A2SD for me (I think it's FAT or FAT32)
ClockWorkMod Recovery

gnexus47 said:
I wanted to use USB Tunnel to share my PC's internet connection with the phone, but I got the error:
Code:
- exec '/system/bin/sh' failed: No such file or directory (2) -
I tried to install other APK's through ADB and they also failed, so I googled this error and I saw that the main issue is a failing ADB Shell. I tried to open Shell and I got the same error. The difference between me and the other users is that my phone is booting as usual, USB Mass Storage works, the phone is detected by fastboot- and adb devices commands and everything is working as intended, except for installing APKs through ADB/opening Shell.
Here is my phone's current config:
MeDroidMod 1.4.4 w/ HWA
Latest Tiamat kernel
TexasICE HBOOT w/ 210/8/218 partition layout
4GB microSD card...I don't know the filesystem but it's definitely NOT ext4, so there's not A2SD for me (I think it's FAT or FAT32)
ClockWorkMod Recovery
Click to expand...
Click to collapse
Which adb commands did you use? Can you list the commands here that you had used? It could be that you didn't issue su command to get superuser rights?

you don't need to be in Shell to push apk
put the apk on your C: drive
open command window and navigate to the folder you have adb/fastboot in--normally tools of your sdk
then:
type adb devices--then
1. adb remount
2. adb push C:/CalendarGoogle.apk /system/app/CalendarGoogle.apk
3. adb push C:/CalendarProvider.apk /system/app/CalendarProvider.apk
4. adb shell
7. chmod 777 system/app/CalendarGoogle.apk
11. chmod 777 system/app/CalendarProvider.apk
12. exit
13. Reboot
use the apk name of whatever you are flashing in place of mine and your chmod may not be exactly like mine--

ADB Shell
rugmankc said:
you don't need to be in Shell to push apk
put the apk on your C: drive
open command window and navigate to the folder you have adb/fastboot in--normally tools of your sdk
then:
type adb devices--then
1. adb remount
2. adb push C:/CalendarGoogle.apk /system/app/CalendarGoogle.apk
3. adb push C:/CalendarProvider.apk /system/app/CalendarProvider.apk
4. adb shell
7. chmod 777 system/app/CalendarGoogle.apk
11. chmod 777 system/app/CalendarProvider.apk
12. exit
13. Reboot
use the apk name of whatever you are flashing in place of mine and your chmod may not be exactly like mine--
Click to expand...
Click to collapse
I don't use ADB Shell to push APK's. That's just another thing which doesn't work.
@taodan: I only use: adb install xxxxx.apk.

A work around is to mount the sdcard and drag and drop the apks to the sdcard. Then install using your favorite file manager.

evilkorn said:
A work around is to mount the sdcard and drag and drop the apks to the sdcard. Then install using your favorite file manager.
Click to expand...
Click to collapse
that will work too, i've used root explorer to copy paste from sdcard to correct file location. prefer adb. set your permissions after
did you try adb remount first, not sure if that would help
what i was saying is you don't need to type adb shell. assuming you are doing this from a pc command terminal window.
you can use the commands I gave above to push apk. i think when you push it copies apk to phone leaving apk on pc also. install actually moves it to phone--as i understand it
here is some links and info that might help.*
http://www.talkandroid.com/guides/beginner/install-apk-files-on-android/#.T2-cdaJST3U
http://www.brighthub.com/mobile/google-android/articles/37151.aspx
also, have you ever had luck installing/pushing apk's. you may not have the correct environmental path on pc or are typing incorrect path in your command line
you can google environmental path editing for android and get examples of how to do it--i am not even sure mine is set right since I still have to type the full path in command window to use adb
sorry if this is old news just trying to find your problem

[GUIDE][ADB]Easiest How to use adb, logcat, etc for noobs and newbies

ADB:-
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as rebooting and rebooting in recovery mode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
USB Debugging MUST be turned ON in the device for ADB to see it & Developer options is hidden in Android 4.2 and
above, Hitting Build number 10 times in
About Phone/Tablet reveals the menu (Thanks lilHermit for reminding me to add it)
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE (If you however want to set environment variables. Click on Show Content)
We can easily append the sdk platform-tools and tools folder to your systems environmental path variable directly from command line(cmd) by simply issuing one command and performing a system reboot:
Code:
[COLOR=Black]SETX PATH "%PATH%;[/COLOR][COLOR=Indigo]SDK_Install_Path[/COLOR][COLOR=Black]\platform-tools;[/COLOR][COLOR=Indigo]SDK_Install_Path[/COLOR][COLOR=Black]\android-sdk-windows\tools" -m[/COLOR]
Just replace the "SDK_Install_Path" in the above with the proper path of your SDK installation. Example: C:\android-sdk-windows
(Thanks to WugFresh for telling me :victory
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. However, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Note:
If you have spaces in path of apk, you can execute the command without breakage if you include the path inside quotes. (Thanks to etcman)
Eg:-
Code:
adb install "G:\Program Files\AreeB.apk"
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped​
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
ls: Shows list of directory
cd: Changes working directory
rm: Removes the file
logcat: Displays logcat
mount: Mounts the partition
busybox: Busybox Applets
Credits
Google: For Android and several searchings
Samsung: For Galaxy Ace s5830I
paxChristos for amazing logcat guide
Broadcom: For their Open Sourceness
XDA Forums : For the precious knowledge

Reserved

Reserved Once More

Last One

Reserve the guide

install full rom
how to install a full rom from adb?

Pretty sure it's impossible. Sorry.
Sent from my E15i using XDA Premium App

Perfect Guide to use ADB Commands..
It is very clear and perfect guide to use ADB commands.. I tested this all and works fine..

You can use apks to do logcats from the phone too, I use catlog.

About Broadcom being open sourced made me laugh hahaha.

open source broadcomm, i see what you did there .

Updated OP

Hey, I have downloaded adb a week ago. I did everything like your tutorial and more but adb doesn't see my device. I already have USB Debugging on and have the USB Drivers, but it doesn't work. This is what I get (Screenshot)

Android-fany said:
Hey, I have downloaded adb a week ago. I did everything like your tutorial and more but adb doesn't see my device. I already have USB Debugging on and have the USB Drivers, but it doesn't work. This is what I get (Screenshot)
Click to expand...
Click to collapse
Probably because of bad drivers
Can you use any other software with your mob
Because when I had this problem, reinstalling drivers fixed it.

iamareebjamal said:
Probably because of bad drivers
Can you use any other software with your mob
Because when I had this problem, reinstalling drivers fixed it.
Click to expand...
Click to collapse
I already reinstalled it like 5 times. Still doesn't work.

Android-fany said:
I already reinstalled it like 5 times. Still doesn't work.
Click to expand...
Click to collapse
Which Windows?
Which ROM?

iamareebjamal said:
Which Windows?
Which ROM?
Click to expand...
Click to collapse
Windows Vista
Stock Rom + Interactive Kernel (If the kernel is important too)

Android-fany said:
Windows Vista
Stock Rom + Interactive Kernel (If the kernel is important too)
Click to expand...
Click to collapse
Ah Vista
That old Nemesis
Frankly telling you bro, Vista sucks big time
I unistalled it as soon as I found out that Android kitchen won't work on it
Sorry bro
I don't know much about Vista
Install 7 or 8

AW: [GUIDE][ADB]Easiest How to use adb, logcat, etc for noobs and newbies
iamareebjamal said:
Ah Vista
That old Nemesis
Frankly telling you bro, Vista sucks big time
I unistalled it as soon as I found out that Android kitchen won't work on it
Sorry bro
I don't know much about Vista
Install 7 or 8
Click to expand...
Click to collapse
I can't install Windows 7/8 because it is not my computer.
But Android Kitchen and the other tools works. Just not adb.
Tapatalked by s5830i

Android-fany said:
I can't install Windows 7/8 because it is not my computer.
But Android Kitchen and the other tools works. Just not adb.
Tapatalked by s5830i
Click to expand...
Click to collapse
Very strange
Download My Phone Explorer and check if its working!!
Its just 2mb-6mb

[HOW TO] Debrand boot animations without flashing new ROM

** Requires ROOT+Busybox and either Terminal or a capable File Manager
So you don't feel like flashing a new ROM and losing all your data, but your carrier's boot up and shutdown branding is getting on your nerves? Here is what you do, the basic idea is the same as putting on a new boot animation
I'll assume you're using a Terminal and bootsamsung.qmg for the rest of this, the other files follow the same method
Copy stock boot and shutdown animations onto your SD card, I'll call the path to this location %sd%. A copy of the stock files in the attached archive.
Open terminal and become root
Code:
su
You may need to remount your /system partition as writable, if you're connecting via ADB, adb.exe may crash here - that's fine, just re-connect the USB cable and you shouldn't need to repeat this step again
Code:
mount -o remount,rw [COLOR="RoyalBlue"]/system[/COLOR]
Copy bootsamsung.qmg from %sd% to /system/media/,
Code:
busybox cp -f "[COLOR="RoyalBlue"]%sd%[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]" "[COLOR="RoyalBlue"]/system/media/[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]"
Set the permissions of the file to 644,
Code:
chmod [COLOR="red"]644[/COLOR] "[COLOR="RoyalBlue"]/system/media/[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]"
Get rid of the SD card copy if you don't want it anymore,
Code:
rm -f "[COLOR="RoyalBlue"]%sd%[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]"
Clean up any overriding animations, I had this happen for my shutdown animation where my carrier had a shutdown directory in /system/media/video/ which contained another copy of shutdown.qmg, so check for the existence of these and remove them, e.g.
Code:
if [ -f [COLOR="RoyalBlue"]/system/media/video/[/COLOR][B][COLOR="Purple"]bootsamsung[/COLOR]/[COLOR="Green"]bootsamsung.qmg[/COLOR][/B] ]; then
rm -f [COLOR="RoyalBlue"]/system/media/video/[/COLOR][B][COLOR="Purple"]bootsamsung[/COLOR]/[COLOR="Green"]bootsamsung.qmg[/COLOR][/B]
fi
Reboot and see what happens!
Extra notes: Always keep backups of original files. If you can't get past the boot animation, restore the backups.

paulie-uk said:
** Requires ROOT+Busybox and either Terminal or a capable File Manager
So you don't feel like flashing a new ROM and losing all your data, but your carrier's boot up and shutdown branding is getting on your nerves? Here is what you do, the basic idea is the same as putting on a new boot animation
I'll assume you're using a Terminal and bootsamsung.qmg for the rest of this, the other files follow the same method
Copy stock boot and shutdown animations onto your SD card, I'll call the path to this location %sd%. A copy of the stock files in the attached archive.
Open terminal and become root
Code:
su
You may need to remount your /system partition as writable, if you're connecting via ADB, adb.exe may crash here - that's fine, just re-connect the USB cable and you shouldn't need to repeat this step again
Code:
mount -o remount,rw [COLOR="RoyalBlue"]/system[/COLOR]
Copy bootsamsung.qmg from %sd% to /system/media/,
Code:
busybox cp -f "[COLOR="RoyalBlue"]%sd%[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]" "[COLOR="RoyalBlue"]/system/media/[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]"
Set the permissions of the file to 644,
Code:
chmod [COLOR="red"]644[/COLOR] "[COLOR="RoyalBlue"]/system/media/[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]"
Get rid of the SD card copy if you don't want it anymore,
Code:
rm -f "[COLOR="RoyalBlue"]%sd%[/COLOR][B][COLOR="Green"]bootsamsung.qmg[/COLOR][/B]"
Clean up any overriding animations, I had this happen for my shutdown animation where my carrier had a shutdown directory in /system/media/video/ which contained another copy of shutdown.qmg, so check for the existence of these and remove them, e.g.
Code:
if [ -f [COLOR="RoyalBlue"]/system/media/video/[/COLOR][B][COLOR="Purple"]bootsamsung[/COLOR]/[COLOR="Green"]bootsamsung.qmg[/COLOR][/B] ]; then
rm -f [COLOR="RoyalBlue"]/system/media/video/[/COLOR][B][COLOR="Purple"]bootsamsung[/COLOR]/[COLOR="Green"]bootsamsung.qmg[/COLOR][/B]
fi
Reboot and see what happens!
Extra notes: Always keep backups of original files. If you can't get past the boot animation, restore the backups.
Click to expand...
Click to collapse
Hello, I'm interested in debranding my verizon s5. I'd love to get rid of the Verizon screen at bootup. I read through your directions and it seems that you are suggesting overwriting the animation with the stock that you provided. All good. It is the use of the terminal that I am completely unfamiliar with. I tried using adb.exe in a command window inside of windows 7 and it didn't even like the first command 'su' My phone is rooted with a custom rom and busybox in developer mode. Could you help me out with what terminal to use and how to connect etc. to enter the commands? I have a decent filemanager installed but It doesn't let me write to system. Thanks for this post.

Eaglebiker said:
Hello, I'm interested in debranding my verizon s5. I'd love to get rid of the Verizon screen at bootup.
Click to expand...
Click to collapse
My first comment must be to say I have a G900F, the international version of the phone and it's using a stock ROM with a few tweaks, e.g. root. A custom ROM will have changed the system partition already so this method shouldn't be applicable there - if it shows a carrier logo on a custom ROM then it's in another partition, not system
Eaglebiker said:
I read through your directions and it seems that you are suggesting overwriting the animation with the stock that you provided. All good. It is the use of the terminal that I am completely unfamiliar with.
Click to expand...
Click to collapse
I gave terminal instructions so people could do it only using their phone but as you've noticed, it's not the only option
Eaglebiker said:
I tried using adb.exe in a command window inside of windows 7 and it didn't even like the first command 'su'
Click to expand...
Click to collapse
If you are using adb, make sure that adb can gain root - the flag should be somewhere in your superuser's settings - then with your USB connected launch adb into shell mode from your computer. This makes adb act as a terminal
Code:
adb shell
If you see a $ then you are not root and will need to gain root, i.e. run su
If you see a # then you are root and don't need to do that
Eaglebiker said:
My phone is rooted with a custom rom and busybox in developer mode.
Click to expand...
Click to collapse
All good things!
Eaglebiker said:
Could you help me out with what terminal to use and how to connect etc. to enter the commands?
Click to expand...
Click to collapse
The terminal I use is can be found here (though I used v1.0.65). Most custom ROMs already include it so you may find it in your apps already. It's all on your phone so you'd type on your phone's keyboard as normal. You shouldn't have to use this if you want to use ADB.
Every time I wrote a %path% you will need to enter the real path for what you have on your device, e.g. %sd% may be /extSdCard/
Eaglebiker said:
I have a decent filemanager installed but It doesn't let me write to system.
Click to expand...
Click to collapse
What doesn't let you do this? If it's "read only" then you may need to remount the /system partition (my step 3). File managers like the one you get with CM do let you do root things but it needs to be in root mode or prompt mode (see it's settings). To find /system in a file manager, the easiest way is to keep going up until you're at /, then you should be able to go down through [/B]/system[/B]
Eaglebiker said:
Thanks for this post.
Click to expand...
Click to collapse
Thank you for letting me give some meaningful answers in post 3!

The Rom I'm using would be better described as a stock lollipop rom for the 900v with a few tweaks.
I now understand that you can have a terminal on the s5. I've installed the terminal and greatly prefer it. Using a terminal on the s5 hadn't even occurred to me and it sounds much easier then hooking to a computer needlessly. Awesome.
I manage to get su access #. in step 2.
in step 3 I type in the mount command and nothing seems to happen. no errors
in step 4 it tells me the folder or file doesn't exist. I'm certain it does. I can see it in my file manager. in the folder /extSdCard/bootsamsung.qmg and the destination folder is /system/media as well. I've tried it with and without quotes and no joy. Any clue what is going on?