Yo.
according to this post *here* its possible to bypass the phones Google register/Verizon activation screen, and allows a person to access to the phones home screen.
my question is this: since the Google register wasnt done, but its now possible to make use of the phones wifi, can we set the account to have permanent open access to the device w/o having to use the corner hack again??
the reason why Im asking is that I currently use a G1 as a wifi device, and Im *very, VERY happy* with it like that, but since its apparent the Android OS on the phone wouldnt receive any further updates (unless I wanna use a custom mod, and therefore have to root the phone to do so), finding an updated device which allow me the same type of freedom would be most preferable.
any & all replies are welcome.
Tazer
Related
Hey folks!
I followed the instructions posted by allcaps33 at http://forum.xda-developers.com/showthread.php?p=53549710 to get provisioning disabled, and the native hotspot app is working for me now! I just wanted to confirm if this was an operation similar to running Wifi Tether Router on an unlocked/rooted device (I had an S2Sky prior that I tethered off of regularly). I've got one of those too-rare Unlimited Data plans and am traveling cross-country, made possible by being able to tether my laptop to my phone to work. Just wanting to confirm that this was relatively as secure as using the Wifi Tether Router on my S2Sky. On a semi-related note, that app doesn't seem to want to run properly on my S5; when I click Enable Router it turns on the Wifi, which immediately connects to the house's wired router. It still broadcasts but doesn't send data, and it's hit or miss if a device can even connect to it from there.
Next question - I'm used to flashing a CM ROM within the first couple days of getting a new phone, which doesn't seem feasible just yet with the S5 (from what I can tell anyway; I'm not used to having a current-gen device). I've heard about the myriad evils of OTA updates, and was hoping to get help on how to disable them. I would like to avoid my device upgrading to a point where my above-stated desired functionality is disabled. Ideally, I'd like to get rid of the various bloatware apps as well, though am not sure how to go about that.
I appreciate your time and support, and thanks for being a community that's always been there for me as I derp along with my fancy internet boxes!
Hi!
The absolute easiest way is to use Rom Toolbox. I have the pro version, but I believe it's available in the lite version as well.
Download and open up RTB.
Tap on "App Manager"
Then scroll down until you see "AT&T Software Update"
Tap on it.
A popup will display. Swipe from right to left, and you will be on the "Advanced" tab.
Scroll down and tap on "Advanced Freeze."
You will come to a screen which shows you the Activities, Recievers, Services, and Providers. Tap on EACH box/line. This will Disable OTA services.
We're not done yet!
Go back to the App Manager screen again, and repeat the process for an app called "LocalFOTA"
Finished!
I also Disable most of the bloatware and Knox this way.
Have fun!
---------- Post added at 12:58 PM ---------- Previous post was at 12:49 PM ----------
Now for the hard part...
Yes this can be as secure as the other the tether. Ensure you use and change the password service with the app.
As for the tether turning your wifi on, it is supposed to do that. The best way to get this to work is to turn the tether on and off (then on again). If this does not work, try emptying the data/cache for the built-in tether app. And start from scratch.
allcaps33 said:
I also Disable most of the bloatware and Knox this way.
Click to expand...
Click to collapse
KNOX - What is it? I'm under the impression it's some sort of security for the phone, to protect from malicious activity that you might not be aware of, but also that it'll "tattle" on you if you mod your phone in a way AT&T doesn't approve.
Knox is two things.
1) It is a security container for apps. It works as both a license/drm type software for Samsung official apps.
And
2) Android contains a root environment at all times. This is what makes SU possible. It used to be quite easy to invoke Android system calls as root.
Root is actually separate from super user. Knox, like SEPolicy, helps dev companies detect, halt, and/or hinder apps, not su itself, but apps that that use these root system calls.
Be wise, even though Knox itself does not "report" these types of actions, it still logs them. And there are other apps that can read these logs and send out these reports. I should say (and I'm only guessing) that only work/company issued phones are setup like this. Not your personal phone.
In fact, our phones actually contain a file which logs all root system calls. It has nothing to do with Knox but, I believe this binary is what hinders us open devs, but makes it easy for Samsung and AT&T to restore/repair our phones.
For more info on Knox:
https://www.samsungknox.com/en/partners/app-developers
I know nothing about any of this so bare with me guys/gals please. Just need help once and ill remove my account. If any of you feel like im wasting your time then please tell me and ill remove my post. Thankyou and i hope someone will give me an idea of whats going on.
Friends ex girlfriend is remotely accessing his phone from her computer, she can lock him out and write text out of format on the lock screen. She has deleted everything on his phone 8 times in the past hour. The Verizon recovery app has been disabled, we went into the Verizon store and changed EVERYTHING, number, passwords, made sure if she ever called in wanting info she couldn't get it. There is no way she figured out any of the passwords, she doesn't have access to any of his accounts, gmails facebook etc... i thought for sure she was using the recovery app but that's impossible cause no account has been created to access to his phone. Idk guys like i said im not an expert one thing that has me most skeptical she can write whatever she wants, whatever color, on his phone on any spot on the screen. Its completely out of set text formations on the lock screen looks like doodles i guess. Just curious if you guys have have ever heard of anything like this happening before. Thanks and i apologize if this shouldn't be here just on a desperate attempt to figure this out. Verizon is completely stumped they have no idea how she does it, even the main tech guy at the store (idk his credentials) cant figure it out.
From what I've seen so far, Android Device Manager (part of Google's setup) can do remote wipes. as can Motorola ID. I imagine both of these may "automatically setup" when you re-activate the phone. Beyond that, you'd need an app to perform such changes, I'd think.
Also, if he's on a joint-account with his exGF, and if she has access to the account, VZ may be doing this without the store-people knowing it?
schwinn8 said:
From what I've seen so far, Android Device Manager (part of Google's setup) can do remote wipes. as can Motorola ID. I imagine both of these may "automatically setup" when you re-activate the phone. Beyond that, you'd need an app to perform such changes, I'd think.
Also, if he's on a joint-account with his exGF, and if she has access to the account, VZ may be doing this without the store-people knowing it?
Click to expand...
Click to collapse
If it's Android Device Manager, maybe it would be sufficient to just change the Google login password?
Yeah, he changed his Google password right?
schwinn8 said:
From what I've seen so far, Android Device Manager (part of Google's setup) can do remote wipes. as can Motorola ID. I imagine both of these may "automatically setup" when you re-activate the phone. Beyond that, you'd need an app to perform such changes, I'd think.
Also, if he's on a joint-account with his exGF, and if she has access to the account, VZ may be doing this without the store-people knowing it?
Click to expand...
Click to collapse
He was on a joint account but upon breakin up with her he took her phone, cancelled it, removed her from the account changed his passwords to facebook and google and everything else. Just for the guy to call in and request info he has to answer 5+ extra security questions before hes allowed any info. But ill check out the ADV maybe thats it. Thankyou
I'm still seeing Android System using the lion's share of my battery life and I've started looking at the services running within it. The IPSec service is always near the top of the Android System pile and I was wondering if it's safe to disable it.
Some light Googling is turning up the service is related to VPN networking but there's not much more available (at least at an entry level of understanding). This link provides a decent understanding. I don't use remote access or corporate VPNs. My only real question is if I disable it using the App manager, are there routine functions that might be disabled? Should I be weary about Samsung Pay?
Thanks!
Finaly have you find a solution ? i'm reseaching on google and i can't find how disable ipsec on android , if you have know how do this , please let me know
Root your phone to enable super user abilities, and search for ipsec in rom manager, then disable it.
Realizing Im going back in time.. Or if you have a device like the Samsung S6 Active, an AT&T branded, close to perfect device which I have yet to find a way to Unlock the bootloader and root ..? Try AdHell-2. The link(s) are here at XDA. You must... 1.) Create a Samsung Account, 2.) Apply for a Developers Account SEAP, 3.) Request a License Key, 4.) Toggle On Unknown Sources in Settings/Lockscreen & Security/Unknown Sources, 5.) Install the AdHell-2 .apk, 6.) Then Activate the App by Copying your License Key. * This is a great App which not only serves as a highly-efficient Ad Block, but also allows for the Disabling of System and User Apps. Anyone reading this know of a way to root the S6 Active?
So, this sounds simple; but I guarantee you it is not.
I just got my Note5 about 2 weeks ago; and despite some missing key features, I really like it. Until today.
Carrier: Sprint (who apparently doesn't have 24/7 customer service)
My fingers were a little dirty (which they have been before) and my scanner wouldn't unlock the phone. Cleaned them and now it's already locked and seems to not really check the prints anymore?
First attempted fix: backup password, I know I set it up...but it doesn't work. None of the passwords I might use will work.
Second attempted fix: Google signin, I have a free google apps account and apparently using my whole email address as username doesn't work on this; also tried just using the plain username just in case. I know the password is correct. I'm the domain administrator.
Third attempted fix: Android device manager, tried setting a new password on the lock screen and was greeted by the infuriating message "Since google has verified that your screen is already locked, the password you set won't be needed"
Fourth attempted fix: chat with samsung support, which was utterly useless. Although I did find out that samsung has their own unlock utility...except that it has to be setup beforehand.
Fifth attempted fix: bang head on cement...hasn't shown any signs of working yet. Although I feel less frustrated.......and less conscious.
Theories: free version of Google Apps, sucks (the apps themselves are great)...I've had tons of trouble getting signed into certain google features over the years. Also I have no option for a support PIN to use to contact google support.
I think that my latest OTA update may have somehow changed or reset my backup password.
The last theory is whomever changed Android device manager to not reset lockscreen passwords whenever you want to...basically made that tool half as useful as it should be and completely useless to me.
Anyone have any other ideas, that don't involve a full wipe?
I was finally able to gain access to my phone. I had to disable two-step verification in order to sign into my google apps account from the lock screen.
I am having the same issues and tried ALL of the fixes you tried except I didn't get the notification to login with google. When does that happen?
I had the problem, too. I ended up having to factory reset. REALLY irritated by this.
How to Remove FRP Lock From Android Device ?
The FRP feature is always enabled on your device as long as you have an active Google account. To disable FRP, you must remove your Google account.
To remove your Google account, follow these steps:
1 : From any Home screen, touch Apps > Settings.
2 : Touch Accounts > Google.
3 : Touch your Google account, and then touch MORE > Remove account.
Important: If you are sending your device in for service, selling your device, or giving it away, it is very important that you remove your Google account and reset your device.
Share it.
Wanheda-Klaus said:
How to Remove FRP Lock From Android Device ?
The FRP feature is always enabled on your device as long as you have an active Google account. To disable FRP, you must remove your Google account.
To remove your Google account, follow these steps:
1 : From any Home screen, touch Apps > Settings.
2 : Touch Accounts > Google.
3 : Touch your Google account, and then touch MORE > Remove account.
Important: If you are sending your device in for service, selling your device, or giving it away, it is very important that you remove your Google account and reset your device.
Share it.
Click to expand...
Click to collapse
How do you get around it if you bought a refurbished android moto XT1650-02 on FB and they didn't do what they should have done here in this post?
TonyDaTorch said:
How do you get around it if you bought a refurbished android moto XT1650-02 on FB and they didn't do what they should have done here in this post?
Click to expand...
Click to collapse
Have a look at my posts on this subject.
Currently I'm looking into whether I can side load some code via a FAT32 formatted SD card, and if possible, I need to locate where the flag is stored which sets this FRP. Now this could be stored on a rom chip of sorts and at this stage I dont want to break open the device to desolder chips, so this blog could be useful at giving clues into what needs to be looked at. Although the device is a Blink Mini camera, the technique can be applied on other devices, like smart phones.
Blink Mini RE, Part 3 -- Staring into the eye of the binary
If we stare at a binary for long enough, we will intimidate it into giving us its little secrets
astrid.tech
Ideally, I'd have a working device, dump the rom contents, then trigger the FRP and then dump the roms again to compare whats been changed, which would hilight areas for further investigation and maybe even the bit flag in question.
The other area of interest currently is Wireshark with the USB packet sniffer. Lenovo's/Motorola's Rescue and Smart Assist program aka LRMA can interrogate the device via a USB cable and detect the firmware. LRMA also suggests enabling the Developer mode/USB debugging which is enabled by clicking the build number seven times in the Google Android settings. So the question is can LRMA detect the FRP has been set? If it can, Ghidra https://ghidra-sre.org/ can be used to detect the FRP bit flag. I say bit Flag, it could be multiple bit flags in a variety of locations. Never under estimate your enemy.
I've used the Emergency Contact select a photo trick, to gain access to all apps, where I've gone straight for the Settings and Build number, tapped it 7 times as per LRMA's instructions but its not unhidden the developer mode and USB debugging options. This could be disabled once FRP is triggered, but its why I say it could be more than one bit flag which is set. Like you see with UEFI bios on some pc motherboards, there could actually be a two or more locations which could be used.
Like I said earlier, having a working device, dumping roms and then triggering FRP would be ideal, but when you dont have any money, it forces you to use your brain as you can't just step out and buy a new device mirrored in every way.
At this stage I dont know if this FRP flag can be undone. It might be like these RaspberryPi One Time Programmable switches as seen here, but I have been able to toggle some of those as well! https://github.com/raspberrypi/docu...asciidoc/computers/raspberry-pi/otp-bits.adoc
I've so far been unsuccessful in finding out if there is an equivalent of vcgencmd otp_dump for Android phones as this could be another way I might be able to find the FRP flag without having to dump the roms.
This is all new to me so I might be looking in the wrong area's as I'm just an unqualified out of work for decades boring old penniless windows programmer so I'm learning as I go along. But you might find what I've put is useful if you fancy a Thanksgiving, Xmas & New Year challenge for a change.