Has anyone else got a home dock and is having problems getting it to output video?
I have 4 mpeg-4 files that work on the standard player brilliantly, but if I ask it to output via HDMI, the monitor/ TV stays blank although the video no longer shows on the Streak screen.
As the Streak asks me if I want to Switch to HMDI I presume it knows there is a connection... plus on both my monitor (using an HMDI to DVI cable) and TV (HDMI to HDMI cable) the monitor/ TV doesn't go into standby, which it would if there was no signal being received. If I take the HMDI cable out of the dock, the monitor says no signal being received but plugging it back in doesn't make it show the video that's playing...
I know it can work as in between all the failures, just once I have had the video playing on my monitor through the cable as expected (I did nothing different but can't make it do it again)
Am I missing something obvious to make it work?
All the other functions seem to work fine - though I was surprised that if you plug in speakers (or headphones) sound still comes out of the Streak. Is it meant to?!
Mine should be here tomorrow so will let you know then
I've still had no joy with the dock... Tried all sorts of file types and conversions but nothing works. The Streak registers the HDMI cable is inserted, asks me if I want to output, if I say yes, the vid disappears from the Streak screen but the other end never gets it apparently.
I phoned Dell who, after 20 minutes of really lame questions - had I plugged the cable in... - and being put on hold, told me to take the phone back to O2 and ask for another . As my Streak is over 28 days old I'll be Streak-less for at least 10 days.
And then if the problem is with the dock not the Streak?!!
Any other home dock users out there, got any suggestions?
Sorry if this is too obvious, but have you tried a different hdmi cable? My dock works fine but I' ve had a similar problem with a htpc.
Sent from my Dell Streak using XDA App
My dock is working fine
I have tried three different HDMI cables, although through the same TV as we only have one with HDMI. I also tried an HDMI to DVI to my monitor which also doesn't work.
Dell think it might be the Streak, O2 think the dock... Neither want responsibility!
Sent from my Dell Streak using XDA App
samstables said:
Has anyone else got a home dock and is having problems getting it to output video?
I have 4 mpeg-4 files that work on the standard player brilliantly, but if I ask it to output via HDMI, the monitor/ TV stays blank although the video no longer shows on the Streak screen.
As the Streak asks me if I want to Switch to HMDI I presume it knows there is a connection... plus on both my monitor (using an HMDI to DVI cable) and TV (HDMI to HDMI cable) the monitor/ TV doesn't go into standby, which it would if there was no signal being received. If I take the HMDI cable out of the dock, the monitor says no signal being received but plugging it back in doesn't make it show the video that's playing...
I know it can work as in between all the failures, just once I have had the video playing on my monitor through the cable as expected (I did nothing different but can't make it do it again)
Am I missing something obvious to make it work?
All the other functions seem to work fine - though I was surprised that if you plug in speakers (or headphones) sound still comes out of the Streak. Is it meant to?!
Click to expand...
Click to collapse
Well, this may be something to consider:
Are you sure that the DVI monitor you are connecting is able to decode HDCP signals?
The HDMI output of the Streak may be HDCP encoded, and though the monitor might see the connected input, it may not be able to decode it. Your source files may not be HDCP encoded, but the output channel (your Dell Streak Dock) probably is. Have you tried to output your dock in a different system? An HDMI-equipped TV perhaps?
See here:
http://tv.about.com/od/hdtv/a/hdmidvihdcp.htm
and here:
http://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection
PS.
After reading your post again Iss that you have tried in two different devices, and they both fail... there are region locks in the HDCP interface as well, so you may have incompatible outputs on the digital side.
I would still try more combinations (or even ROM builds) before I rule out the issue as being your Streak and/or your dock.
Do you have anyone with another Streak/Dock/Monitor to rule out all possibilities?
It is sad that we have to go through that mess at times, but there are lots of digital devices, that make the 'Plug and Play' , 'Plug and Pray' Sadly :$
Thanks for the comprehensive reply vagelis (which by the way comes out as "bagels" using Swype!)
I don't have access to any other DVI or Hdmi screens - I'm sure my other half is taking it as a sure sign we should buy a new tv!
Dell have, thankfully, agreed to replace my dock so hopefully tomorrow I can feel not quite so stupid when/if it works or not!
Perhaps O2 may have even released the promised 2.1 update & really make my day!
Sent from my Dell Streak using XDA App
Related
Well i have had my ps3 for about a month and i bought component cables for it because the hdmi wasnt working. But i have decided i want to use hdmi.
When i plug my high quality gold hdmi lead into the tv and ps3 i turn it on and no picture no sound. I read on the internet, hold the power button in and it will auto set the video, still no sound or picture. I plug the component back in and it works, i go to display settings and switch to hdmi, i switch channel on tv to hdmi it says no signal.
Hmmm...
The tvs im using:
Sony Bravia KDL-32EX403 1080p
Tesco Technika 22" 1080I
The ps3 is a phat 40gb f/w 3.50
Can anyone help?
Thanks
Sent from my GT540 using XDA App
Make sure you are switched to the right HDMI port, I know my TV has a few of them
Then try a different cable.
jaszek said:
Make sure you are switched to the right HDMI port, I know my TV has a few of them
Then try a different cable.
Click to expand...
Click to collapse
my technika only has one and the sony tells you which one something is plugged into.
still no luck so i will ask some one for a hdmi lead to borrow.
Just bought the dock thing and tried to put it to work with the HDMI out on a philips HD tv, and it happens that there is no audio at all. I know the analog speakers are disabled when the HDMI is working, the audio provided by the HDMI is really not working.
I have no clue of what is happenning. I am getting just the image fom the tab but no audio at all.
I hope someone knows what is going on and help me.
I'd really appreciate the help.
tks.
Hi. The problem seems to be application dependent. When I use RockPlayer and VitalPlayer digotal audio is there through a docking station. Other players including stock one output just analog audio. Regards. K
Sent from my GT-P1000 using Tapatalk
Tks mate but when I used the rock player I am still getting no sound at all. Its not just the rock player but even the native one or any music player. The sound isn't passing through the hdmi cable.
Sent from my GT-P1000L using XDA App
I will conect the tab to the TV set in few minutes to double check my findings once more. Btw I use the latest firmware MCD. Regards K
Sent from my GT-P1000 using Tapatalk
Actually, I can now confirm that I have digital audio output from the docking station with any of the mwdia players including the stock one. When initially started, all the players mute the audio when the tab is in the station. Pls volume up through hardware keys and you will have the audio output. Regards K
Sent from my GT-P1000 using Tapatalk
The volume is up when plugin to the dock and yet I get no sound changed the volume up and down but no answer. Have two Philips televisions and different models here and on both I get the same issue, no digital sound. The analog sound is fine when plugin the av cables. Now I wonder if the hdmi cable isn't working or is the tv that doesn't like the dock.
Sent from my GT-P1000L using XDA App
Can you post the details of the cable including it's version number. It may be you have an incorrect cable.
About the cable: e324540 awm style 20276 80°c 30v vw-1 hdmi 1.3 cable hentek.
Sent from my GT-P1000L using XDA App
I bought the dock to connect the tab to my projector and I found out that when the hdmi is in use all the audio will go to the hdmi cable.
Now my projector has very poor speakers and no audio out. I really hate that I can't use my Bluetooth speakers when using the dock.
There is some way to split the hdmi signal in video and analog audio?
Sent from my Galaxy Tab
Still have video and no sound
So, I still have the problem. I have the dock connected to power from the supplied (5v 2a) adapter. I then connect it to my tv. Video works great. I also speculated that maybe I had to use the 3.5mm jack for sound but that isn't working either.
I also have an adapter for rca-out and that's working fine, but I'd rather have the better quality available to me via HDMI.
I've got no solution yet. As I did, put here your the specs of your cable, maybe its something about that cable tho.
Sent from my GT-P1000L using XDA App
hdmi cable info
So, it's still not working for me. I don't have the box the other cable came in so today I went out and got a new one. I now have one of these:
http://www.digitalwarehouse.nl/hdmi-kabel-type-a-type-c-mini-2m.html
It is a type-A <-> type-C high speed HDMI Cable. I told the guy when I bought it that it had to be v 1.3 and he said it was though I don't see that on the box any where. I know for sure that my original cable was a v 1.3 because I remember reading that on the box when I bought it.... The only other info I see on the packaging is this:
Transfer rate: 10,2 Gbit/s
BandWidth 340 MHz
ARC audio return channel
My problem persists and to eliminate other potential causes, I've now tried it on another TV as well: no dice
It could very well be the cable. I have had some HDMI cables not output sound from DVD players. Here is the cable I bought and it outputs everything, sound, video the works.
http://www.amazon.com/AmazonBasics-High-Speed-Cable-Ethernet/dp/B003ES5ZRS/ref=sr_1_2?ie=UTF8&qid=1294706115&sr=8-2
Having my tab on my TV rocks
right cable
Well, I live in sweden. Ordering from Amazon is not ideal for me. Is there any other way I can get an indication that it might be the cable? I am loathe to keep buying cables assuming that it's the issue... I mean, is there something on the cable itself that I can look for? Certains pins or something?
/geir
I dont know that much about HDMI cables, does kinda seem pointless to keep buying cables.
Possibly google it? I would say try it on something else, however nothing else you own probably need A to C hdmi connection.
All I know is thats the cable I bought and it works perfect for me on my 4 year old projection LCD
Tested the cable with something else...
Ok, so my daughter has a camcorder which will take a mini hdmi cable. I just tested both cables with her camcorder and both of them give me video and sound...
If the cable is the issue it's definitely not because it isn't at all capable of handling audio
Any chance anyone has any other ideas? I just have this feeling there is something else going on... Like maybe I need to flash to a new version or something.
I have a european tab, in case that matters.
Hi guys,
been a passive viewer in the xda forums for a long time but never posted anything, so be easy on me - It's my first.
I would like to connect my galaxy s i9000 to the pc screen.
I know there's the TV out option, but it involves a 3.5" to RCA cable, and pc screens don't have RCA jacks.
Does anyone know of a way to do this? and if you know what kind of cable is required that will be great.
I'm using the CM9 rom, build 17 from theam hacksung.
Just to clarify, I want to connect to phone to the PC so I can view the phone on the PC screen.
Thanks in advance
Short answer is you can't.
Longer answer is you might.
Your monitor doesn't have RCA connectors but if you have a tuner installed inside your PC, you might be able to connect it to that and then use the software that came with the tuner to display it onto your monitor.
Another method would be to use a RCA to whatever input your display has converter but they are are usually pricey and after a search for RCA to HDMI/VGA/DVI I don't think they really exist.
Even if there was a 3.5mm to HDMI/VGA/DVI cable, it wouldn't work unless the display was designed to take a PAL or NTSC signal through those types of connections.
With cm9, you need to have 3.5mm to RCA cable plugged in then go into System Settings>Advanced>TV Out. The option is greyed out when no 3.5mm to RCA cable is plugged in and the option has to be checked every time you plug the cable in.
Thanks for the reply,
I knew about the tv-out option, but didn't think about using a tuner - that might work!
Another question, do you think that a micro usb - hdmi cable might work?
I saw a while back that samsung offered such a cable that was designed for that purpose exactly.
I've searched a lot of forums but havn't got a clear answer if this actually works, not have I seen a youtube video demonstrating this.
Does anyone know if using a micro usb - hdmi cable wokrs?
jons753 said:
I knew about the tv-out option, but didn't think about using a tuner - that might work!
Click to expand...
Click to collapse
Do you know what tuner you have? I'm not sure if yours will have it but there will be a yellow plug like the ones you find on a TV.
I'm %99.9 sure that the I9000 doesn't have HDMI out through USB. It would seem a bit excessive to have two video out ports. Although you did spark an interesting subject, if someone could whip together drivers to work with something like this we could potentially have HDMI through USB but I don't see it happening any time soon.
Here's another way to view your phone through your PC: http://mymobiler.com/
So I bought the HDMI dock station. I had a spare HDMI standard cable. I bought a mini-to standard adapter. I plugged it all up (yes, with the power cable), and nothing... well, *something*... the TV says it was getting a 1080i signal, but nothing showed up. Television was bought new in 2009.
So I thought, "Well maybe it's the TV." So I happen to have a reasonably new (less than a year) HP 2311x monitor w/ HDMI input, and it says it's receiving signal but also shows nothing.
SO... I thought, "Well maybe the dock or the adaptor is bad." So I went back to Radio Shack where I bought the adapter. Connected everything up to a little HDTV, and IT WORKED. WTF?
Came back home, and it doesn't. WTF???
Anyone know why?
Ok I got the monitor to work after sorting out some issues with the HP support site. Looks cool to have the dock display on there.
BUT... the TV. It connects, then disconnects, then connects, then disconnects... meaning during a movie, I hear sound for a split second, then none, then sound again, then none.... never gets to the image. So it feels like something isn't quite detecting right on the TV side.
Any ideas? This is the adapter I am using with my standard HDMI cable: HDMI Female A to HDMI Male C Swivel Adapter. It works fine on the Radio Shack display TV with MY HDMI cable, and fine on my HP 2311x monitor.
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's £30 for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Crin said:
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Click to expand...
Click to collapse
I'm afraid the only solution is to get an HDCP compliant projector...
CCast will only pass on HDCP info from the Device it is plugged into, but has no HDCP of it's own. And it can not be faked.
The Adapter will also break any HDCP as HDCP is meant to deny you the ability to do what your trying to do in the name of not letting you make copies of the content.
You will be fine with Content that does not require a HDCP signature to play (self ripped movies or non-DRM materials) but something like Netflix has little chance of working without some HDCP compliant device being connected the the CCast.
You can get a standard HDMI DVI adaptor for cheap, and maybe this will allow HDCP information to be kept. However you may be unable to keep the audio stream without a more elaborate device.
Sent from my Nexus 5 using Tapatalk
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it?
Click to expand...
Click to collapse
Yes you're essentially converting a Digital signal to analog and HDCP only works via Digital.
A Real HDMI to DVI adapter as suggested may help but make sure in the specs it says it will pass HDCP.
And do make sure it also has Audio Breakout.
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Click to expand...
Click to collapse
Your projector is a little newer than my Sony VPL-HS10, but it might have the same issue - the marketing wasn't 100%. My VPL-HS10 initially said it was HDCP-compliant on the DVI-D port, but ended up that it isn't. Well, it might be for a few select devices, but it isn't up-to-spec for the general standard.
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
Your other potential problem is that the adapter may not be converting the HDMI timings over to VGA, and rather expecting the receiving device to compensate. Some can, some can't.
The specs for your projector says it has a DVI-I port, so it might accept analog on that port.
So first I'd try connecting DVI-to-VGA adapter (the ones that normally come with video cards to get VGA out of the DVI port) and connecting Chromecast --HDMI--> HDMI-to-VGA --VGA--> DVI-to-VGA adapter --DVI--> Projector and see if you get a different result on the DVI input - sometimes the scaler is separate or different for different inputs.
If that doesn't work, I recommend HDfury2 or newer - beware of counterfeits as there are many fakers online. I have successfully used HDfury products with my Sony projector from various sources. You'll want the HDfury2 or newer to get the audio breakout, which is a 3.5mm (1/8-inch) analog stereo and digital (optical TOSlink).
bhiga said:
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
.
Click to expand...
Click to collapse
Not to mention probably as expensive as a new Projector with HDMI and HDCP support! LOL
Crin, did you ever get this solved?
I bought the same stupid converter you showed in the image.