Related
last week
i used i9000 to download software with wifi
because the battey was low , so it turned off~
then i took another battery ...
but my i9000 stuck on "I9000" screen again and again ~
i flash 2.2 rom,but the problem still go on
my i9000 don't have external SD Card
because it has 16GB internal SD Card
my question is : 1.i can use recovery mode , download mode is good
but after falsh 2.2 rom it display this notice
"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)
something went wrong while doing the lagfix. sorry"
2.i use 2.1 rom to falsh ,then it display this
"date wipe failed"
then i can use recovery mode
but when i use :update.zip , it notice
"(I/O error)
" E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)"
could anyone help me pleeeeeeeeeease~~~~~
what'up with it?
The internal SD Card is bad? i need to change it ?
Help~~ ~
thanks a lot
So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App
snapper.fishes said:
So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes .i tick re-repartition , and it can't start after flashing 2.1 rom or 2.2 rom
somebody said "when some date is writing during the voodoo runing,at that time power off by accident could make SD Card block"
"E:\" can't wipe , how can i fomat E: partition ?
i'm keeping on wait
thank you
lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje
JJEgan said:
lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje
Click to expand...
Click to collapse
thank you very much ~
i'm not good at English , so "Eclair" means 2.1 rom ?
1. when it turn off i can't get in recovery mode ,so voodoo is enabled when i flashed 2.2 rom .
2. i used a software named "UC xunlei" to down a salmpe 720P RMVB video at that time . then it turned off.
3. clockwork recovery can't use . only samsung recovery mode can get in.
4. my i9000 was sending to Samsung service centre yesterday, but they said "maybe they can't repair it either"
"sigh................."
I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5 The file that has MODEM in its file name.. SORRY!!!!!
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.
anoneemooz~ thank you ~~
i'll try ~
i hope what you said can get my i9000 back~
anoneemooz said:
I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.
Click to expand...
Click to collapse
That solution looks fine but i'm in worst situation ever since i can't do this:
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
My phone is stuck in the fisrt screen.( with this text Samsung Galaxy s i-I9000)
i can't enter in download mode, i also noticed that even the battery icon doesn't show up i only get loading icon not the battery one. Please help.
damnit, i tried the method anoneemooz posted. But Odin just stops after a couple of minutes flashing, and gave me the error message: Couldn't write to...
I can go in download modus and in recovery mode, but i cannot flash a ROM. I tried a couple of 2.2.1 ROMS
it dispaly " DATA_LOOP=FALSE CACHE_LOOP=FALSE DBDATA_LOOP=FALSE BIND_DATE_TO_DBDATA=FALSE"
now, i still can't wipe or fomat my internal SD Card
notice"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)"
also it shows "Error mounting /mnt/sdcard/ android_secure!
Skipping format..."
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje
JJEgan said:
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje
Click to expand...
Click to collapse
Oops yeah sorry..copy pasted the wrong thing for that part.
To OP: It seems as though you have a dead internal SD unfortunately..Well I could be wrong.
3 Button Fix for any firmware of SGS:
http://forum.xda-developers.com/showthread.php?t=785201
To all who run into Odin problem:
SORRY!!! For PHONE it should be the file that says MODEM in its filename. Copy pasted wrong name.
Download jg5 from samefirmware.com
Close everything relatet to keys and nps. Check in the tray and close if its running there. Use Odin3 v 3.1 and make sure u put the files in the right place:
PDA=Code
Phone=Modem
CSC=CSC
As pit download 512.pit
Check repartition.
AFTER tgis put ur phone in download mode and connect it.
Thrn click start and let it do its thing. If it doesnt work just try 3 or 4 times. Always been able to fix the error u get like this
Edit: or just check this out:
url]http://forum.xda-developers.com/showthread.php?t=845708[/url]
Sent from my GT-I9000 using Tapatalk
Hello, I have been on Draky's rom 10.1 , today I noticed that my phone SGS was stuck at the first boot screen , i tried restarting it , and still would get stuck on the screen , then I tried to reflash it with darky's rom wouldn't help. I tried to reflash with original 2.3.3 still the same. The nature of the issue is it would freeze at the boot screen , and when I got to the recovery menu i get into Android System recovery (3e) even when flash with darky's rom through Odin. the following is displayed in recovery menu:
update media, please wait
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed
and I can't do anything with it, tried to flash 2.1, 2.2, 2.3 versions same thing ... at the best I was able to get into samsung animation and after that the phone would just go dead, until I physicaly remove battery. I tried to flash pit files separatly, then PDA, then PHone, and SCS from Odin still no results ... any suggestions gurus ???
You tried to flash pit files separately? So you used odin to flash three files
(PDA,CSC and PHONE) with a pit for repartition all at once because you don't repartition with pit files unless you have the other three files. I'd try Ezbase 3.0http://forum.xda-developers.com/showthread.php?t=991792 with the specific odin and pit file plus the three .tar files is included in the post.
tried all 4 files at the same time , pit, pda, phone, csc same results ...
That's quite weird then. I would try the ezbase I suggested above though, worth a shot
was installing jvq for darkyrom via odin and got the following errors below after the flash. now getting the same thing with the stock rom downloaded the jvt from sammobile.com flashed via odin rebooted to recovery and same errors please help im phoneless
copying media files...
e:failed to mount /dbdata ( file exists)
e:copy_dbdata_media;can't mount /dbata your storage not prepared yet. please use ui menu for format and reboot.
# manual mode #
e:format_volume: rfd format failed on /dev/block/st110
Flash a ROM with 3 files. Generally all the firmwares with 1 file only miss the DBData file.
Why JVQ? There are many newer firmwares out there.
Use odin 1.85.
Pun in download mode (press down-vol + home +power together at phone off)
Download stock rom.
Use pit file and put it in PIT.
use CODE file and put it in PDA
use PHONE file and put in in phone.
use sgh-* file and put it in CSC.
mark repartition flag.
lean bootloader empty
flash it.
Good Morning
Very ironic,but i came here to ask about rooting my phone a year back and now i'm back in sort of the same situation..
A year back I rooted my froyo 2.2.1 based Galaxy S to a gingerbread version,then i used quite a few of the ICS roms available on this forum,had been using Cyanogen for the past few months.Yesterday i had some free time,so i thought would check out the JB roms available.
So i did the usual,download the JB version of Fishears since i had a iNand.put it in my internal sdcard..but i could not access the memory card from CWM 5.0.2.7..,so i put it in my external memory card and tried to run the zip from there,but the process got aborted in the middle,tried it twice,dint work.
Then i remembered i had faced this internal memory problem before,had to go and switch on the debugging mode in the developer option.[P.S:- i had been facing the encryption successful problem for half a year,was too lazy/busy to fix it,i just took it in my stride and rebooted a lot to get into the homepage]
So,I'm in CWM and i run the usual process and run the zip file from the internal sdcard,it started out fine,them BOOM.my phone reboots all of a sudden.When it restarts,it does not have a OS to boot into,the green android image with a red exclamation mark and a few text appears which happens too fast to read and it keeps rebooting and this process goes on.
I can still access CWM and the download mode,i tried going into CWM but the internal sd doesnt open and the zip file fails to mount from the external sd.
So i thought **** it,i'll do the rooting part again and i run up ODIN,download the semaphore 2.7.4 kernel,and i see it is just 15 mb or so,i remembered i used more than 1 file and used the pit folder also,but i read it on the semaphore website,its only 1 file and have to use it as the PDA.went to download mode and odin recognised it and the process completed without a hitch,it even showed a green PASS..
but the problem came when it had to reboot after the process,it got stuck in the "Galaxy S GT I9000" page and never moved forward.it was there for 30 minutes or so before i pulled out the battery.
Basically
1.I cant get past that page
2.I can access the CWM and Download modes
3.I accepted my mistake and thought of not doing any more mistakes,so icame here
4.When i boot into CWM mode,these errors come
E:failed to open/etc/recovery.fstab (No such file or directory)
E:unknown volume for path[/cache/recovery/command]
E:Can't mount /cache/recovery/command
E:unknown volume for path [/cache/revovery/log]
E:Cant mount /cache/recovery/log
E:Cant open /cache/recovery/log
E:unknown volume for path [/cache/recovery/last_log]
E:Cant mount /cache/recovery/last_log
E:Cant open /cache/recovery/last_log
E:unknown volume for path [/cache/recovery/command]
Click to expand...
Click to collapse
Cant access the external sd from the CWM now
I dont mind any os now,as long as i can take calls.Am leaving college for home by train day after,so i need a working os as soon as possible
Thank you for reading this and thank you in advance for taking your time to help me out
deathstoned said:
Good Morning
Very ironic,but i came here to ask about rooting my phone a year back and now i'm back in sort of the same situation..
A year back I rooted my froyo 2.2.1 based Galaxy S to a gingerbread version,then i used quite a few of the ICS roms available on this forum,had been using Cyanogen for the past few months.Yesterday i had some free time,so i thought would check out the JB roms available.
So i did the usual,download the JB version of Fishears since i had a iNand.put it in my internal sdcard..but i could not access the memory card from CWM 5.0.2.7..,so i put it in my external memory card and tried to run the zip from there,but the process got aborted in the middle,tried it twice,dint work.
Then i remembered i had faced this internal memory problem before,had to go and switch on the debugging mode in the developer option.[P.S:- i had been facing the encryption successful problem for half a year,was too lazy/busy to fix it,i just took it in my stride and rebooted a lot to get into the homepage]
So,I'm in CWM and i run the usual process and run the zip file from the internal sdcard,it started out fine,them BOOM.my phone reboots all of a sudden.When it restarts,it does not have a OS to boot into,the green android image with a red exclamation mark and a few text appears which happens too fast to read and it keeps rebooting and this process goes on.
I can still access CWM and the download mode,i tried going into CWM but the internal sd doesnt open and the zip file fails to mount from the external sd.
So i thought **** it,i'll do the rooting part again and i run up ODIN,download the semaphore 2.7.4 kernel,and i see it is just 15 mb or so,i remembered i used more than 1 file and used the pit folder also,but i read it on the semaphore website,its only 1 file and have to use it as the PDA.went to download mode and odin recognised it and the process completed without a hitch,it even showed a green PASS..
but the problem came when it had to reboot after the process,it got stuck in the "Galaxy S GT I9000" page and never moved forward.it was there for 30 minutes or so before i pulled out the battery.
Basically
1.I cant get past that page
2.I can access the CWM and Download modes
3.I accepted my mistake and thought of not doing any more mistakes,so icame here
4.When i boot into CWM mode,these errors come
Cant access the external sd from the CWM now
I dont mind any os now,as long as i can take calls.Am leaving college for home by train day after,so i need a working os as soon as possible
Thank you for reading this and thank you in advance for taking your time to help me out
Click to expand...
Click to collapse
you may try this, if you can boot to download mode but make sure your is GT-I9000
Before start, please backup all your important data and phones setting. Then,
Step 1:
I) Download Android 2.3.6 Gingerbread Value Pack (XXJVU)
II) Download ODIN http://www.mediafire.com/?nhhhkm5c2j43rhw Extract Odin3 v1.7.zip to get .exe file
also download the pit file, http://www.mediafire.com/?v2rub40k1bvccj4
Step 2: Extract the ROM [password: samfirmware.com]
Step 3: Launch ODIN. (Don’t open Samsung Kies)
Step 4: Turn off your Galaxy S.
Step5: Put your Galaxy S into Download Mode by Press and hold Volume Down + Home + Power buttons to boot into Download Mode.
Step 5: Connect your Galaxy S with your PC using a USB cable. (Before proceed to Next Step, please make sure that ODIN detect your device)
Step 6:
Click on Odin PIT Tab
Select the PIT – s1_odin_20100512.pit
Click on Odin PDA Tab
Select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
Click on Odin PHONE Tab
Select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5.
Click on Odin CSC Tab
Select GT-I9000-CSC-MULTI-OXAJVU.tar.md5.
Step 9: Click on START in ODIN to start flash the leaked firmware on your device.
hope this will help.
I had this problem with Paranoid Android before... the zip was corrupt.
If you are able to extract the rom with winrar/winzip/totalcmd or other program, install it, if it is corrupt, download it again again and again...
Sent from my GT-I9000 using xda premium
Samtan4326 said:
you may try this, if you can boot to download mode but make sure your is GT-I9000
Before start, please backup all your important data and phones setting. Then,
Step 2: Extract the ROM [password: samfirmware.com]
Step 3: Launch ODIN. (Don’t open Samsung Kies)
Step 4: Turn off your Galaxy S.
Step5: Put your Galaxy S into Download Mode by Press and hold Volume Down + Home + Power buttons to boot into Download Mode.
Step 5: Connect your Galaxy S with your PC using a USB cable. (Before proceed to Next Step, please make sure that ODIN detect your device)
Step 6:
Click on Odin PIT Tab
Select the PIT – s1_odin_20100512.pit
Click on Odin PDA Tab
Select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
Click on Odin PHONE Tab
Select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5.
Click on Odin CSC Tab
Select GT-I9000-CSC-MULTI-OXAJVU.tar.md5.
Step 9: Click on START in ODIN to start flash the leaked firmware on your device.
hope this will help.
Click to expand...
Click to collapse
Did what u said,got past odin,then it went into the setup on the phone and all of a sudden it went into the recovery screen,the message shown is
-- wiping data...
Formatting /data...
E:format_volume: rfs format failed on /dev/block/macblk0p2
Formatting /dbdata...
formatting /cache
Deleting meta data
Data wipe Failed
-- Applying Multi-CSC..
Installing Multi-CSC
APPLIED THE csc-Code "CPW"
Successfully applied multi-CSC
Click to expand...
Click to collapse
I have a option to reboot,its the samsung recovery screen..its still there,i havent touched my phone since then
deathstoned said:
Did what u said,got past odin,then it went into the setup on the phone and all of a sudden it went into the recovery screen,the message shown is
I have a option to reboot,its the samsung recovery screen..its still there,i havent touched my phone since then
Click to expand...
Click to collapse
flash CF-root for xxjuv with a pit512 (repartition ticked) cf-root can download from here http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Once rooted with CWM, enter CWM using combo keys and enter "mounts and storage" and format everything except Boot and also do the full wipes one more time
Finally Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this
issued.
http://forum.xda-developers.com/showthread.php?t=1841250 <--- this is very useful link for new user from xsenman
Samtan4326 said:
flash CF-root for xxjuv with a pit512 (repartition ticked) cf-root can download from here http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Once rooted with CWM, enter CWM using combo keys and enter "mounts and storage" and format everything except Boot and also do the full wipes one more time
Finally Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this
issued.
http://forum.xda-developers.com/showthread.php?t=1841250 <--- this is very useful link for new user from xsenman
Click to expand...
Click to collapse
flashed it with CWM,went into it and in Mounts and storage there is only 1 option- "mount USB storage"
Nothing else
Below that in the CWM message area,there is
E:unknown volume for path [/system]
E:unable process volume! Skipping...
Checking /data...
E:unknown volume for path [/data]
E:unable process volume! Skipping...
checking /cache...
E:unknown volume for path [/cache]
E:unable process volume! Skipping...
Done!
E:unknown volume for path [/cache/recovery/command]
E;Cant mount /cache/recovery/command
E:unknown volume for path [/cache/recovery/log]
E:Cant mount /cache/recovery/log
and the same for last_log
Click to expand...
Click to collapse
deathstoned said:
flashed it with CWM,went into it and in Mounts and storage there is only 1 option- "mount USB storage"
Nothing else
Below that in the CWM message area,there is
Click to expand...
Click to collapse
select mounts and storage format everything except Boot and also do the full wipes one more time and power off your phone
reboot to download mode follow by Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this.
Samtan4326 said:
select mounts and storage format everything except Boot and also do the full wipes one more time and power off your phone
reboot to download mode follow by Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this.
Click to expand...
Click to collapse
I dont think you got what i said.I installed CFW and went into the recovery,there under Mounts and storage ,there was nothing apart from "mount USB storage"..not even Mount BOOT..nothing apart from that 1 option..when i tried to do a wipe "data/factory reset or cache" it showed me that message which i posted above.still i installed the jvu+root again (Twice actually),it was the same result,the error i posted 2 posts above.
I'm in no mans land now and cant do anything apart from my phone apart from go into download and recovery mode
Please someone help me,i've to go on a 33 hr train journey tmrw and without a phone,it'll be really troublesome
Have you tried the EZ Recovery kit by Slaphead20?
http://forum.xda-developers.com/showthread.php?p=29114573
Sent from my GT-I9000
amerkiller1995 said:
Have you tried the EZ Recovery kit by Slaphead20?
http://forum.xda-developers.com/showthread.php?p=29114573
Sent from my GT-I9000
Click to expand...
Click to collapse
New developments now
I followed the steps given in the EZ recovery mode,it crashed into the same e3 recovery mode,for the heck of it i flashed the CFROOT which was provided and it worked fine..all disks were mounted fine and no errors in cwm,
went into Mounts and storage and formatted everything apart from boot and followed the rest of samtans advice
It crashed into the same e3 Rec mode again with the same meta data error message
any suggestions guys,atleast now i'm hopeful after seeing that CWM screen without any errors
deathstoned said:
New developments now
I followed the steps given in the EZ recovery mode,it crashed into the same e3 recovery mode,for the heck of it i flashed the CFROOT which was provided and it worked fine..all disks were mounted fine and no errors in cwm,
went into Mounts and storage and formatted everything apart from boot and followed the rest of samtans advice
It crashed into the same e3 Rec mode again with the same meta data error message
any suggestions guys,atleast now i'm hopeful after seeing that CWM screen without any errors
Click to expand...
Click to collapse
After flashing ez base, flash Cm9 and then if you want cm10
Sent from my GT-I9000
amerkiller1995 said:
After flashing ez base, flash Cm9 and then if you want cm10
Sent from my GT-I9000
Click to expand...
Click to collapse
Ok dont know whether this is good or bad
I installed CM9 from the external sd as the internal sd was inaccesible in any way..the installation showed info like
"the internal sd card marker could not be found
Going ahead with installation"
the installation continues and restarts once and updates but it does not boot into the main page,it directly goes into the Encryption Unsuccessful page.When i try Reset Phone,it goes into the CWM recovery screen with some errors,
when i try to install CM10 from this recvery screen,it initially stops the installation saying the data partition layout is different and all my data will be wiped.run the .zip to go ahead with the progress.I run this it goes directly into the CWM 6.0._._ and it doesnt show any errors,i try to reboot it gets stuck on the galaxy s screen.
this situation is better than the previous condition as i know a OS can still run on my Phone..Just need to get this thing rectified now
Please if anyone could help me right now,i would be really grateful..not able to contact anyone without my phone
It might be a hardware problem... I had something similar
http://forum.xda-developers.com/showthread.php?t=1895224
But for now go to Ez recovery and then try Darky's Resuruction ROM.
Sent from my GT-I9000
amerkiller1995 said:
It might be a hardware problem...
But for now go to Ez recovery and then try Darky's Resuruction ROM.
Sent from my GT-I9000
Click to expand...
Click to collapse
I installed Cyanogen 9 and got through tht EU page by restarting abut 20 times or so,now i'm trying to install a working version of gapps in it.Tried 1 but the setup failed,so i flashed back to Cyanogen 9 and am not touching it till i reach home.a device capable of making and taking calls is better than nothing..
Is there a way to download contacts from gmail without gapps,the play store is not included in the original rom and i'm hesitant to go into CWM recovery mode as i will have to tackle the EU page again
Anyways thanks for your help,will have to fix this problem once and for all after i reach home
I don't know about contacts from gmail. When you're home look at my updated post above
Sent from my GT-I9000
basically
just reflash gingerbread
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again
I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.
Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2
Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.
Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2