Database Develop

[Q] Help! I'm screwed... maybe.

I'm a noob needing some of that famous XDA expert advice... I have a Captivate running the stock 2.1 rom. My phone is running Unleash the Beast and lag-fix. Phone has been running fantastic but I did something (not sure what) yesterday and now when I reboot it gets past the AT&T screen and freezes. I can reboot to recovery mode using the power and volume buttons but deleting data and cache has had no effect. I have no experience with flashing android roms or backing them up. My question is: can I reflash the stock rom (if I can find a copy somewhere) with Odin and fix this mess or am I bricked and might as well call AT&T? Please respond soon! Thanks!

Tell me your build number, located under battery, mine us 1008.
Do you have a mac or windows pc?
Do you have the usb drivers installed, have you bern able to connect with your pc?
Odin will save you, we just need to figure out which one to use

Wow, that was quick! Well, there's alot of #'s under here... the only # that looks remotely like yours is 1011 with a barcode and then rev0.4. Hope that's it. I have a windows PC and the USB drivers are installed. I use PdaNet to tether my pc to the internet via USB debugging mode... I have not tried to to connect to my pc after this problem, no. I'm using my old HTC FUZE to connect as we speak... Thanks!

I think it is safer to try this
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
You are on a newer build then I am. The odin I use brings me to stock jf6, I believe your stock is jh7. This post is very detailed and if you floor the steps you should be good to go
If you have any other questions send me a pm

K. Thanks, dude. I'll check it out.

[Q] PC Not Recognizing Cappy

I'll try to keep this as short as possible. After installing Perception 9.5 on my phone my PCs started to fail to recognize the device. I was never able to get it to work with Odin but I was able to connect it to install Perception 10.2 hoping that might fix the issue (10.2 goes back to 897 whereas 9.5 was based off some Samsung 959 ROM). Unfortunately, it did not and I can't connect the device to any of the three PCs I have.
Either nothing happens or the PC says "usb device not recognized". Things I have tried:
Switched usb debugging on and off
Switched from kies to mass storage to media player
Removed and reinstalled drivers on all 3 PCs (2 32-bit Vista, 1 64-bit Win7). The drivers used were the ones in the FAQ thread.
Tried a different micro usb cable
I'm at a loss as to what else to try. I never had this issue before trying to flash Odin with Perception 9.5 on my device. Any suggestions?

Have you tried a different USB port on your computer? I was using one on the front of my computer for months and then lately it wouldn't connect and I went through the things you did and nothing worked. I am now using a USB port from the back of my computer and it is working fine. If you have wifi you could also look into an app called SwiFTP. It will allow you to transfer files between your phone and computer using your wifi instead of USB cable. Good luck, hope you get it figured out.

Tman42 said:
Have you tried a different USB port on your computer? I was using one on the front of my computer for months and then lately it wouldn't connect and I went through the things you did and nothing worked. I am now using a USB port from the back of my computer and it is working fine. If you have wifi you could also look into an app called SwiFTP. It will allow you to transfer files between your phone and computer using your wifi instead of USB cable. Good luck, hope you get it figured out.
Click to expand...
Click to collapse
Yep, I have tried a total of 14 usb ports on 3 PCs, lol. I have Doubletwist and Dropbox so I'm not worried about moving files and whatnot, but I do like testing out other ROMs so I need to be able to connect in order to use Odin. I also want to sell this phone soon and pick up an Inspire so I kind of need to get it back to stock.

Update: I tried installing the Vibrant drivers (since that's what Perception 9.5 was based off of) and I did a hard reset of the phone. PC is still unable to recognize the device. Is there a zip file out there that would allow me to revert back to stock?

There its the jh7 ota that design gears put out a while back, but you are taking a risk flashing anything without knowing you can use odin.
If you are going to try it, make sure you disable lag fix first

did u try adb?
did u try different USB cable?
can u get it into download mode?

tzabka said:
did u try adb?
did u try different USB cable?
can u get it into download mode?
Click to expand...
Click to collapse
Do not know what ADB is, I'll do some homework. Tried a different cable. Can get it into download mode.
@mcord, thank you, I'll google that. I'm not sure what else to try.

http://www.ponack.net/designgears/JH7_OTA.zip

mcord11758 said:
http://www.ponack.net/designgears/JH7_OTA.zip
Click to expand...
Click to collapse
Thank you, before I try that I want to go down the ADB route. Is this what I'm looking for or is there something more updated?
http://forum.xda-developers.com/showthread.php?t=502010

That is what you are looking for but I am not sure it will do you any good if your pc does not recognize your phone

i m oso having same problem. it charge but just won't connect to my pc. tried all but fail. same worries

Phone not recognized by pc

Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App

donk232 said:
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989

Make sure you are using the oem usb cable. I had the same problem, changed cables and it worked

some cheap cables are for charging ... bt headsets and other stuff the data cables dont connect, its just for power.

koreancanuck said:
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.

donks232 said:
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
Click to expand...
Click to collapse
You gotta make sure that your usb port is directly connected to your motherboard (usually back of your computer).

same usb port that has always worked. ive tried them all by now anyway

now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.

donks232 said:
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
Click to expand...
Click to collapse
lolol
Duno what happened but I'm glad it worked out for you

I'm having the same problem with my captivate after flashing REDROM. It won't recognize it if I have USB debugging turned on...

i have a theory... were you on a GB or other i9000 based rom/kernel???

well, im still having a problem getting my computer to recognize the phone, i have to mess with it for a a while to get it to work. i really want to flash anew 2.3.3 rom but without being able to get everything working right im stuck in 2.1
is this a problem with my cord or the connection on my phone? or something weird with my phone after flashing it a lot. its currently back to odin stock, i have been trying to master clear it with no luck

TRusselo said:
i have a theory... were you on a GB or other i9000 based rom/kernel???
Click to expand...
Click to collapse
continiuum miui and cyanogen mod are the only things ive tried to flash

well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB

Guys, this problem while connecting to the PC body is stupidly charging .... Even in the download mode Odin does not see a body that could be? Connect other Cappy-all OK.

donks232 said:
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Click to expand...
Click to collapse
it must be a powered usb hub, on my buddies laptop only 1 out of 4 usb ports saw his phone.
if you can get into download mode you arent bricked.
try installing i9000 drivers, or try another computer.

I came up with this a while back. Could very well be the same issue.
Let me start by saying I'm flash happy, and everyone that knows me personally, tells me to just quit jacking with my phone. NOT A CHANCE! I'm on my 3rd Cappy and shouldn't have ever exchange it again. I only had to in the beginning, because I was a newbie and had not know enough, but to get me in trouble.
I presume that this should work on all Windows OS's. I personally am running Vista Enterprise x86.
My symptoms:
Plug in phone to the usb and it there was about a 15% chance off being able to mount to usb, and Windows recognizing as a mass storage device. I tried un-installing drivers and re-installing and it would work some of the time, until the point came when parts of the driver install would fail. Then to the point when it was just completely unrecognizable. I thought I had it fixed because it seemed intermittent. In the middle of flashing to stock, something interrupted communication between the pc and my phone. Restarted the phone and attempted the flash again. Got a little farther and froze again. I had to use another pc that I had never connected my phone to before and I was able to use my jig to trigger download mode, because no buttons combinations would allow it into download mode.
This got me thinking that it was specific to my pc and not my cable or my phone.
My resolution:
I went straight to the registry and went to find. I deleted every entry that came up for "i897" and "i9000" excluding what was listed in the system volume information, as I didn't have permissions to remove any keys. I didn't keep count, but I probably deleted 300-400 registry keys that pointed to my phone. It seems as if with each developers rom that I had flashed, there was an entry for a different device. Don't quote me on that, because it is just my personal consensus. I also un-installed the samsung drivers, the unknown device driver, kies software, and anything associated with samsung. I noticed that next to all of the i9000 instances, the hex key for me started with 1000ee. So I also searched for the first part of that key trying to ensure that all instances of the device. Lastly, I deleted the samsung folder from program files.
I installed the samsung drivers package commonly listed in all of the other threads for x86 operating systems. I plugged in my phone and watched as each and every driver installed successfully. Keep in mind different drivers are installed depending on if you have usb debugging on/off, and the options for if the preferences on you phone are set to media, storage, or kies. I have multiple usb ports, however testing has shown me that, for me and my setup, I can plug into the port that I used when installing the drivers the final time, I am able to connect consistently. Earlier today, I tried to plug into a different usb port and it was an unknown device. I am led to believe, this is because I didn't un-install the unknown device on this particular port.
If you intend to work in the registry, please remember to always back it up first. You can always restore.
Hopefully my findings can help you as they did me. Happy flashing and I would like to thank the community for the dedication to assisting each other and the developers, for making flashing, better than crack cocaine. Flashing rom's doesn't make you twitch near as much as a crackhead.

Well since you can't use your phone you should sell it to me
Sent from my GT-I9000 using XDA Premium App

I didn't even install drivers, ubuntu got them for me
Sent from my SGH-I897 using XDA Premium App

[Q] So i have not updated this is a log time and now things have been messing up bad

its been a very long while since i updated my phone and used to work fine very slow even when over clocked but fine. the only other thing that happend was very rarely it would restart.
but now the screen wont work all time. it does work some times but not alot. works from reseting the phone. also it may be a loose wire tho because bumping the phone seems to fix it but i think it is just luck that it does.
now the phone is geting calls but nothuing is showing only ringing. i cant even place a call.
what i need to know is what is the latest stable build? and how do i get into the recovery again i cant seem into it again?
im tinking of going back to the original 2.1 but i love the 2.2 only programs ah well i also love haveing a working phone more.

if its a hardware issue simply flashing a new rom wouldnt help i suggest reverting back to stock and take it into a sprint tech store and who knows it could be under warranty still and yes if u flash an ruu theres know way they would ever know it was rooted to begin with.

how do i do this. i can not use adb to push anything to the phone adb wont list the phone in the devices
tutorial i am useing is the stickied one.
how do i revert back to stock
dont see a tutorial but im going to search a bit more

this is old 2.27 official ruu exe when you download it plug your phone into a computer via usb and dont put it in disk mode needs to be charge only im pretty sure then on your computer run the ruu exe and itll update everyhting on your phone and please make sure u have a stable usb cord that wont get disconected easily because all the updates should take around 10-15 min after that youll be on the stock sprint software then u can just update everyhting on your phone by pressing menu settings about phone and software updates but [B]please note that once u runn the ruu you will not be rooted anymore but you can still root easily via z4root after u update everything should u feel the need to[/B] thats all.
http://www.4shared.com/file/2uQunBaV/RUU_Hero_C_Sprint_2276515_R_si.html
thats the download link to the ruu.

thank you the one i was trying wouldnt load in hboot once my phone boots ill try this

yea with this all u need to do is plug your phone into a computer and run the ruu exe and it does everything for you i just couldnt find the right 2.3 ruu but u can still update everything the normal way after this

is there a certain way i connect it because it keeps giving me error 170 usb connection error
edit could it be that i am running 64 bit 7

When it gives you the 170 error with Win7, disconnect and reconnect the usb and re-run the program
Sent from my HERO200 using XDA Premium App

still no go. i did have an error installing sync because i have a 64 bit 7 OS is there a 64 sync install?
one that works because the one that was suppost to work messed up also

I've got 32-bit, sorry I'm not sure if there is a different procedure for 64-bit
Sent from my HERO200 using XDA Premium App

Have you tried a different USB cable? Beyond that, way back when I used HTC sync it was on 64 bit windows 7 fine with no issues. I don't even have it installed now and it ruus fine. If a cable doesn't resolve it, then maybe you just need to delete your USB root hub and force it to redetect USB devices
~maybe I set it too high...

http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
This link help me and right now im on the way to updating the phone. thanks everyone who helped ... now hopefully this is going to fix all my problems

have you installed htc hero drivers yet try these out
place them on your desktop then go to devices/printers then click android phone/properties and update drivers dont do an automatic search make sure you choose desktop for the path.
http://handheld.softpedia.com/get/Drivers/HTC-Hero-Drivers-81097.shtml

yea phone so far is now working as it should touch screen and calls thanks again

Help with Soft brick! Edited with "MY" solution!

Before ppl start asking me, this is what happened. I gave my Cappy to my daughter and after months of running Dlev Rom, I decided to upgrade to ICS. She was not happy with the rom and wanted to go back to gingerbread. I tried downgrading via recovery but had issues with the downgrade. Long story short....ignorant me, I used Odin and end it up with eclair.
Now here is where the problem started. The phone was succesfully flashed with eclair but button combo wasnt working at all. So, I rooted first and then with adb, I adb reboot download, then once in download, I flashed ginger bootloaders and thats how i end it up with the infamous phone /!\ comp. soft brick. Since originally i had no button combo working, I cant get into download mode. My comp just wont recognize the Cappy.
I have searched for hours and tried all ways possible to get into DL mode but "nada"! Even with Odin opened or heimdall, batt out, batt in, all combinations of buttons...nada (nothing), no luck. Also tried the program by Adam to unbrick the Cappy (that I've found searching) but still nada! I have windows 7 with java and that program by Adam just wont work on my comp.
Can someone try to help me on what can I do without sending my daughter's Cappy to a shop...lol?
Edit: In this post I explain what got "me" out of the softbrick after 2 days of trying! It might not work for who ever falls in a similar situation and even mayb is not a proper way of doing things, but it worked on my end!!! http://forum.xda-developers.com/showpost.php?p=26305016&postcount=23

You can use that screen as a download mode.
Remove Java. And then go download Java JRE.
Java JRE 32 bit
Java JRE 64 bit
Try going and grabbing the Heimdall KK4 1 click. Or you could try any of the Gingerbread Heimdall packages in the OneClick Master Collection
I think you'll be fine to run Heimdall after the Java reinstall.

Red_81 said:
Try this:
Take out battery
Plug in usb cable
Hold volume+ and volume-
Pop in battery
This should take you straight into download mode. Just have to flash a new ROM/Stock Image
This came from another post about 10 down from yours.
Click to expand...
Click to collapse
Lol....Trust me, I've done that and all ways possible. At least the phone isnt hard bricked. All i need is DL mode and I should be good! Thx sweety!

Baby Liz Sandra said:
Before ppl start asking me, this is what happened. I gave my Cappy to my daughter and after months of running Dlev Rom, I decided to upgrade to ICS. She was not happy with the rom and wanted to go back to gingerbread. I tried downgrading via recovery but had issues with the downgrade. Long story short....ignorant me, I used Odin and end it up with eclair.
Now here is where the problem started. The phone was succesfully flashed with eclair but button combo wasnt working at all. So, I rooted first and then with adb, I adb reboot download, then once in download, I flashed ginger bootloaders and thats how i end it up with the infamous phone /!\ comp. soft brick. Since originally i had no button combo working, I cant get into download mode. My comp just wont recognize the Cappy.
I have searched for hours and tried all ways possible to get into DL mode but "nada"! Even with Odin opened or heimdall, batt out, batt in, all combinations of buttons...nada (nothing), no luck. Also tried the program by Adam to unbrick the Cappy (that I've found searching) but still nada! I have windows 7 with java and that program by Adam just wont work on my comp.
Can someone try to help me on what can I do without sending my daughter's Cappy to a shop...lol?
Click to expand...
Click to collapse
The [Phone /!\ Computer] screen is another method of Download Mode. You should still get Odin to recognize the phone. If Odin recognizes the phone, you should flash KI2 from This thread, since it has CWM injected. Once you have CWM, you have a clean slate to install any ROM you desire.
If Odin does NOT recognize you phone no matter which USB port you connect the phone to (as it happened to me once), you could try what I did. I downloaded Windows installer for Ubuntu Desktop, and that got me Linux. Once I had Linux, flashed KB2 from the ROM thread linked above. Why Linux? Because I never got Heimdall to work on Windows, but I did on Linux. After my phone was completely stock, I followed the instructions on TRusello's Guide to Flashing ANY ROM to get my phone set up the way I wanted.
I'm sure there are faster ways than the one I just gave you, but I can vouch that my method works, and you might get your phone sorted out while you wait for a better response. Good luck!

That will teach me to edit my post without refreshing first!

kafepuya said:
The [Phone /!\ Computer] screen is another method of Download Mode. You should still get Odin to recognize the phone. If Odin recognizes the phone, you should flash KI2 from This thread, since it has CWM injected. Once you have CWM, you have a clean slate to install any ROM you desire.
If Odin does NOT recognize you phone no matter which USB port you connect the phone to (as it happened to me once), you could try what I did. I downloaded Windows installer for Ubuntu Desktop, and that got me Linux. Once I had Linux, flashed KB2 from the ROM thread linked above. Why Linux? Because I never got Heimdall to work on Windows, but I did on Linux. After my phone was completely stock, I followed the instructions on TRusello's Guide to Flashing ANY ROM to get my phone set up the way I wanted.
I'm sure there are faster ways than the one I just gave you, but I can vouch that my method works, and you might get your phone sorted out while you wait for a better response. Good luck!
Click to expand...
Click to collapse
Yeeee....finally someone with a good heart and willing to share knowledge!!! And BTW, yes I tried all usb ports. The difference between your comp and mine is that I can run heimdall but like I said, way i plug the usb, my comp nor heimdall and/or Odin recognize the phone after the brick.
I'm not home at the moment but thank you from the bottom of my heart for your info. I'll get home kind of late tonight but I will follow your info to the tee and keep u post it...if u dont mind!
Thx and a kiss for you sweety!
Sent from my SGS II 4G using XDA Premium App

Heimdall and odin use different drivers, Once you install Heimdal and use your phone on a USB port, that USB port will only work with Heimdall. Odin will no longer work on that USB port, Until you uninstall the heimdall drivers

TRusselo said:
Heimdall and odin use different drivers, Once you install Heimdal and use your phone on a USB port, that USB port will only work with Heimdall. Odin will no longer work on that USB port, Until you uninstall the heimdall drivers
Click to expand...
Click to collapse
Short and sweet...i installed ubuntu last night on my pc and I thought i lost windows. Did some search and I can choose when my pc start up either W7 or ubuntu. Went to bed at 4am trying to install java to ubuntu with no luck. To b honest, i'm about to quit trying to get this phone in DL mode. My daughter hates me and my husband told me, u messed it up...u fix it! Agh!!!!! I'm trying again but if I cant get it to work I rather just buy my kid a new phone....and thats a shame because that Cappy has been a warrior!
Any other method to get DL mode??? PLEASE...SOMEONE????

Once you're at that screen, it is download mode. You could try a jig. You can build one or buy one.
Did you reinstall java on Windows 7 and then try Heimdall?

Red_81 said:
Once you're at that screen, it is download mode. You could try a jig. You can build one or buy one.
Did you reinstall java on Windows 7 and then try Heimdall?
Click to expand...
Click to collapse
Yes I did and pc still not recognize device. Tried all ports and different usb cable...still no go!

Did device manager not recognize it or Odin/Heimdall not recognize it? I know my system wouldn't show it was connected but Odin/Heimdall still would.

Red_81 said:
Did device manager not recognize it or Odin/Heimdall not recognize it? I know my system wouldn't show it was connected but Odin/Heimdall still would.
Click to expand...
Click to collapse
Neither one recognize the device. With Odin you're supposse to see the yellow light meaning its connected...but nothing, and with heimdall clearly says disconected. I am sooo exausted looking for an answer as to what to do to get this phone on DL mode! I've used both programs in the past but the phone just dont want to come alive!

I understand how frustrating it can be to get a phone to respond.
I went back to your first post to make sure I didn't miss anything and I realized what the issue might be. Since the phone was upgraded to ICS it wouldn't be using the standard captivate drivers any more.
Let's try this:
Download and install the Android SDK
Add the Google USB Driver
Try ODIN/Heimdall again.
I think I had a similar issue when I was reverting a phone from CM7 back to Stock captivate.

Red_81 said:
I understand how frustrating it can be to get a phone to respond.
I went back to your first post to make sure I didn't miss anything and I realized what the issue might be. Since the phone was upgraded to ICS it wouldn't be using the standard captivate drivers any more.
Let's try this:
Download and install the Android SDK
Add the Google USB Driver
Try ODIN/Heimdall again.
I think I had a similar issue when I was reverting a phone from CM7 back to Stock captivate.
Click to expand...
Click to collapse
Oookkkk...will give this a try! Thank you.

Baby Liz Sandra said:
Oookkkk...will give this a try! Thank you.
Click to expand...
Click to collapse
I think it will work. Sorry it took so long for me to realize it. I actually had to do the same procedure within the last week but less sleep + work + cold is making me a little foggy.

Red_81 said:
I think it will work. Sorry it took so long for me to realize it. I actually had to do the same procedure within the last week but less sleep + work + cold is making me a little foggy.
Click to expand...
Click to collapse
Just finished installing both...restarting pc now and will report back. Thank you yet again!

Baby Liz Sandra said:
Just finished installing both...restarting pc now and will report back. Thank you yet again!
Click to expand...
Click to collapse
Ok...thats it! That did not work either. I connected my SGS II just to see if my pc would recognize the phone, and indeed my pc picked up the device as well as my husband's Sensation. So thats it! Just called Radio Shack for a jig and the guy never heard of that...lmao! You guys should see my daughter's look at me....awh!
Anyway...I'm subscribed to this thread so if anyone has another bright idea I'll give it a shot. Thanks again!

Sorry that didn't work either. Here's another thread about connection issues to the computer. I hope this helps
http://forum.xda-developers.com/showthread.php?t=1351224

Red_81 said:
Sorry that didn't work either. Here's another thread about connection issues to the computer. I hope this helps
http://forum.xda-developers.com/showthread.php?t=1351224
Click to expand...
Click to collapse
Well...thank you! Don't know if i should keep DLing stuff to my pc. Now I have ubuntu, sdk manager, hemidall, dont know how many odins, etc. My husband just ask me for a new pc because he tried to uninstall ubuntu and he was unsuccesfull at it. Now this softbrick is gonna cause me some major issues family wise. This really sucks! But hey, me been a female, I just learned that nothing is impossible for us. If my hubbie dont wanna help me...I'll get it done one way or another. I will see my daughter smile....believe that!!!!!
Thank you!

I have a 2.5 year old daughter and would do anything to see her smile.
Here is a guy here on XDA who makes the jigs. However, I still believe you just have a driver issue. At this point I can only say to take off all the drivers, odin, and heimdall and start fresh.
http://forum.xda-developers.com/member.php?u=500006
I used his kindle fire cable and it was great.