Related
Hi all - I have a weird problem for which I am hoping people here would have a resolution. Recently bought a Tytn II,
ROM Version 1.81.415.4 WWE
ROM Date 10/29/07
Radio Version 1.27.15.32
Protocol version 22.51.88.13W
Using with a 2 GB memory card
Now, i have noticed a few times that the device just does not come out from the standby mode - the Green LED indicating that the GSM is on is flashing, but when I try to call into it using anothe rphone, it indicates being switched off or not reachable. I try to start is using the power key, or any number of keys without luck - the only way out is a soft reset.
I have seen some people quote a similar problem, but not inding a resolution there, am posting this up here
Pls help - I am extremely reliant on this as a business device and will get stuck if it behaves like this
Have you tried a hard reset? I know some radio's/ROM's have this issue
mine started doing that a while back and I found that it was a combination of my phone automaticly reciving an email while it was asleep and this program I had that gave you points for AP's and cell towers I forget what its called after I got rid of that program and changed my email to retrive manually the problem stoped
What apps would I need after a hard reset ?
KDKobes said:
Have you tried a hard reset? I know some radio's/ROM's have this issue
Click to expand...
Click to collapse
Hi - thanks for the valuable advice. I would do so - however, another problem is compounding the same - I got this from a friend, and dont have the getting started CD that comes with the pack - can you tell me about, on a hard reset, what apps would I need to reload from the getting started CD? Or would I not need the CD ? I have all the other contact data with me on Outlook, and the other files I have copies of on the computer, so I don't plan to use a backup/ restore.
The only thing I have noticed that gets changed is the sensitivity resets to default usually which can be changed back in KaiserTweak or Advanced Configuration. I would say if you have never done any ROM or Radio changes to the device, and its a new phone its probably got something wrong with it. That gives you 2 options. 1 - take it back and get it replaced if you can, or 2 - follow the WIKI and change you ROM/Radio, but read WIKI because you will need to HardSPl before flashing anything.
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
I have the same issue once in a while. In my case gwes.exe hangs at that point which after that i have to soft reset. Still have no fix found though
I'm sorry but my fix wont work for you as its only for people whose phones only crash in standby there is no gwes.exe hang associated with it. Obviously it only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
@nlel
I allready tried a hard reset but the problem returns after a certain time.
The gwes.exe does not hang when using the device, it only hangs when resuming from standby and does not allways occur.
Well in your case its very obviously a software or hardware problem and nothing to do with the SIM and/or settings which impact the SIM. I don't know what else to suggest if my solution doesn't help I don't know what else you can try to do btw how do you know gwes.exe is crashing when resuming from standby.
When it happens to me (because of phone band type set to auto) I cannot see what is happening on the phone at that precise moment as I have to soft reset. There is nothing that is obviously crashing at the same time.
By the way gwes.exe according to MSDN, its Graphics, Windowing, and Events Subsystem. GWES loads display drivers, printer drivers, and touch screen drivers, maybe you have a hardware fault.
Does it happen to both your Tytn II's?? and have you tried my solution or a new SIM ?
Hi,
I`m facing this weird situation: Destinator (7.0.0.588.11) does not load if phone is on, after the splash screen it just closes (leaving a bar near the battery icon).
I'm using Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (radio 1.65.14.06) but this problem also happened before with OEM 6.0 ROM.
If I turn phone off, Destinator loads fine.... It worked for weeks, but now I just cannot use Destinator...
Any clues ?
I have a similar problem with Garmin Mobile XT
It doesn't load if GPRS/EDGE is configured
try just removing any GPRS/EDGE connection and loading it
if it works, you have the same problem as me
but I didn't find any solution yet
Yes, runs ok with gsm off, even if I reinstall it would not run with phone on....
I'm having the same issues, but turning the phone off solves as you mentioned. At least there is some solution!
Do you guys think a radio downgrade would solve this issue ?
dunha said:
Do you guys think a radio downgrade would solve this issue ?
Click to expand...
Click to collapse
hm, that's a good idea
please let us know if you try that and it works
IGO my way 2006
It`s also happening with iGO my way plus 2006. Any ideas ?
Changed ROM but still crashing...
I'm now using L26 V9 but the problem persists. I think Destinator freezes when loading GPS, because yellow led does not blink at this time.
If I turn phone off, Destinator works fine...Any ideas ?
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
jiannist said:
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
Click to expand...
Click to collapse
u are the reason that iam using destinator7 to my xperia phone
thanks man
jesus love u !
Destinator PN and AT&T Tilt
I have to say that I had been struggling with this program shutting down on my Tilt since 9/09, after having worked for more than a year. I resorted to using an old handheld device to navigate to new destinations while driving, something I do regularly as a social worker. And finally today, after doing much searching on the Internet and attempting different fixes, it appears the solution of deleting sms file is the answer. Thank you very much.
jiannist said:
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
Click to expand...
Click to collapse
Seriously, marry me
I've given up using Destinator for months because I couldn't figure out what the hell was wrong and I installed iGo instead (which I don't like much).
THANKS MAN!!!
jiannist said:
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
Click to expand...
Click to collapse
Seriously, marry her^^^
and i'll be the best man...
Thank you dude. As far as i am concerned. you rule the universe!!!
Really good man! Do we know why does that happens? I just like to be informed indeapth.
I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz
My HTC HD has WIFI Problem: WiFi will not turn on most of the time.
After tapping the Wi-Fi Switch (in Communications Tab) it hangs for about 7 seconds then stops.
Sometimes after 6 seconds the wifi Icon will appear for 1/2 a second but then disappears.
The only way I can get it to connect at all is if the device is cool and I remove the battery for a while....
...Then restart it and Wi-Fi will switch on sometimes (but fail most of the time).
I have flashed the ROM (by different Cookers) many times, Hard Reset the device many times, tried several different radios, and used all different power settings: Still no good.
If error reporting is ON I get error message "device.exe' problem.
As I live in Australia I would have to pay heaps for freight if I send it back to UK so I'm loath to do so.
Anybody know what should I do to fix it?
(PS. My old Diamond's Wi-Fi Turns On and connects every time)
Wrong section
Gimme a break Syqe,
I tried the other section for months with no solutions.
I thought ROM Developers (who visit this section more) would be moree savvy than most maybe.
Don't delete this thread a few days at least?
did you try different radios from this section: http://forum.xda-developers.com/showthread.php?t=466274 ?
yes I did try several radios, thanks zilviukas
This occured while using the new based rom right?
xmoo said:
This occured while using the new based rom right?
Click to expand...
Click to collapse
Not quite sure what you mean but I'm using Dutty's 2.6 currently.
With Radio 1.13.25.24.
Thanks for your help people
Well this problem occured since the latets roms.....
I now flashed WM 6.5 and don't have this problem anymore.
I am on Dutty 2.6 and also had trouble connecting to any WiFi network when trying to connect using the new (Rhodium?) Comm Manager.
When I tried to connect by using the original WinMo WiFi manager and entered the passkey there, it worked...
Don't know if it is ROM-related or anything, it is just my personal experience.
xmoo said:
Well this problem occured since the latets roms.....
I now flashed WM 6.5 and don't have this problem anymore.
Click to expand...
Click to collapse
WOW! Great to hear it's not just my HD with this problem.
Did you have the exact same fault and/or do you know of others who's Wi-Fi won't turn on?
I had same problem even with the original shipped (Orange UK) ROM.
I tried an early WM6.5 but I think it still had the same problem (plus it was Sloooooow and no Storage card recognition)
Well the problem for me.
It connects but then when you want to go to internet or log in into msn etc. It said page cannot be find, or cannot connect.
Altho it was connected with the correct info....
So I had to connect disconnect for a couple of times before it fully worked.....
I'm a beta teste of LEO's roms.
In one of his roms he fixed this problem.
Probably a driver issue.
He will release his rom soon.
Is WM 6.1
xmoo said:
Well the problem for me.
It connects but then when you want to go to internet or log in into msn etc. It said page cannot be find, or cannot connect.
Click to expand...
Click to collapse
OK thanks but that's a totally different problem
Hej,
I have a problem with JBlend? Just got my Diamond 2 yesterday and each time I click on JBlend nothing happens???
I have a jar + jad files and when I click on them nothing happens? Its just like JBlend is dead!!
Does anybody have similar problem or have fixed the problem???
anybody
Anybody can help with the problem please!!
I dont and have never experienced that problem. JBlend works fine here. I use Opera Mini alot and therefore also JBlend - without problems.
Doesn't start
It just does not start when I click on it. Nothing happens at all...
I choose JBlend nothing happens
I choose any java app, nothing happens
It's like dead app
I think the only solution is a hard reset. Then it should work fine again but you lose all your settings etc.
its is done
I have done a hard reset but not solved!
I just bought the phone like 3 days ago..... strange!
Should the VM be started automatically on phone startup or something?
I can't see what seems to be the problem
That is strange. Have you updated your phone to the newest firmware/ROM ?
yes strange
Yes latest ROM. Below is what I have today:
Checked with HTC page and saw that this is the latest online?
Diamond 2
ROM 1.39.403.2 (49068) DAN
ROM date: 05/08/09
Radio: 3.43.25.19
Even more strange. I am using the same version without problems (danish here to ).
If a hard reset does not work then I have no other solution for you. You could if you have not done so yet ask on mobildebat.dk in the Windows Mobile section.
You could also contact HTC in DK and ask for their support.
nice
aha so you are using a DAN ROM too
I will try mobildebat.dk
Thanks for your time