Know that a new modem rom ZSJI1 will be patched if you send the phone to samsumg repair center after 8Sept in Hong Kong. The new rom is an ad-hoc built to cater some critical issues with 3 and make the i9000 hang / disconnect frequently.
As I don't want to send my phone to samsung and erase all my current setting, can someone who did extract the ZSJI1 modem rom such that we can patch it with odin?
I tried JP2 modem, with JM7 PDA. It seems to have solve any issue with 3 in HK.
I tried the jpc rom before, yes it seems solved most of the issue. However i still expetience occasional lst of data connectoon.
Sent from my GT-I9000 using XDA App
still not available in the whole world
Understand that the update can now be found in KIES.
Can someone extract the binrary file such that we can update the phone using odin?
Here it is if you still need it.
GT-I9000_I9000ZSJ1_MODEM.7z
Thanks! Yes I still need it~
the given modem file cannot be flashed using odin
is there any trick???
Really?!
I still not test it but could Richthofen please veryify?
i tried to dump it out but the size is different. it's 12.5mb rather than 12mb, by dd the bml12 directly. i compared with other modems but i didnt have a clue to find out the offsets and make it work
Related
Didn't someone get JME Rom working on CDMA Sprint Tabs? By changing the build name around?
I cant find the post, but who ever it is, please give us more details. How'd you do it? Do you recommend it? How is it holding up? Does it brick anything (GPS, MODEM?)
Thank you!
I did it to my Sprint Galaxy Tab, original post here (http://forum.xda-developers.com/showthread.php?t=929898)
I had to remove movinand.mst and it flashed fine using Odin, I just followed the directions there.
HOWEVER, the way I did it will make the Tab WIFI Only with no known way to get back until someone can figure out how to dump the sprint stock modem.bin.
That is fine with me as I did not want the 3G, but did want the Bluetooth HID. (now my Bluetooth Mouse and Keyboard work)
You might be able to pull the modem.bin file out as well as movinand.mst but I have no idea what that would do, sounds very risky.
M.
did that brick your GPS though?
I use it as WIFI Only as well.
How does the JME run on the tab?
Can you upload the exact JME rom you updated for us CDMA users who are kind of new at this? That is if you still have the version you edited for the Sprint?
If there's one thing I learned with flashing ****.... as long as you don't **** with the radio you can't really mess it up. With that said, don't flash a new modem (radio)
exactly then, cant we just have all these ROMs take out the Modem.bin, wouldn't it be flashable to CDMA then? or no
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
I have no experience in doing this so I was curious on just how someone would go about dumping the stock Sprint Modem? also would we be able to use the epic 4G's modem since it's similar? or would that not work due to the epic having 4G and being a different device? If I knew what direction to go I'd certainly be interested in getting in to this more.
Now if someone can just confirm how to flash without killing the modem, we'll be cooking with gas!
Morolinith said:
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
Click to expand...
Click to collapse
I killed my modem but I need to figure how to get it to mount my sd card.
Sent from my DROIDX using XDA App
Sprint: SPH-P100 firmware
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
paragpatil said:
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
Click to expand...
Click to collapse
----------------------------------------------------------------------
I know that file name is floating around as a flashable "almost stock" ROM that has the Epic 4G modem inserted, so you can recover your sprint tab but lose gps. I would get someone who has already borked their gps by flashing to test it and see if it fixes it before everyone goes flashing this ROM.
If I was doing a restore using the files posted I would not flash the modem.bin. That's what breaks the Tab, not the software.
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
dfinney67 said:
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
Click to expand...
Click to collapse
Well you can't get any worse, so try this file to load;
http://forum.xda-developers.com/showpost.php?p=11139968&postcount=10
Keep trying to get it into download mode, down volume and power depressed together.
Hi if someone can help id really apprteciate it. Dunno why this is confusing me so much.
Anyway I want to put stock uk firmware on my galaxy s so I can sell. Pretty sure it was the unlocked stock firmware.
I tried doing the reg hack on kies - it finds update and then says device version wrong.
I tried using spooffw - for some reason it updates the pda ok but doesnt update phone/csc (click ok and it reverts back to whatever it was on before)
I tried installing JM1 from samfirmwares and whent into kies and again says cannot update on this device.
Can anyone tell me what I need to flash onto this bloody phone so I can get kies to upgrade to the oficial fw.
I would like to put on a 2.1 rom and then have kies upgrade then I know its stock. I downloaded jf3 but that didnt come with phone or csc ? where would I get them?
first of all its not a bloody phone
then why you want to use kies? you can flash a rom by odin easily, just do some study for how to flash a rom and proceed,
kies sometimes have strange behaviours, personally I never used kies after I tried it once
I take it you want not the stock rom but the rom provided by the phone provider .
Two routes one replace the original rom you saved .
two flash stock rom lower version than current rom on Kies . Use a method of spoofing the correct codes for the original product .
Kies only updates if the correct codes for product firmware device and hardware are showing . Once you go the unofficial flashing firmware route Kies may not find these codes until you find the correct codes .
Stock = Samsung firmware Original = network branded that came with the phone .
jje
taha_e said:
first of all its not a bloody phone
then why you want to use kies? you can flash a rom by odin easily, just do some study for how to flash a rom and proceed,
kies sometimes have strange behaviours, personally I never used kies after I tried it once
Click to expand...
Click to collapse
Hi flashing a rom isn't the problem but flashing a rom that makes my i9000 appear un tainted by custom roms etc is where I'm having the difficulty. I wanted to do the final update via kies then I would know that kies thinks my phone has genuine firmware. If it wont update via kies then this is a clear message that the phone has been tampered with and I may not get the money from the company.
JJEgan said:
I take it you want not the stock rom but the rom provided by the phone provider .
Two routes one replace the original rom you saved .
two flash stock rom lower version than current rom on Kies . Use a method of spoofing the correct codes for the original product .
Kies only updates if the correct codes for product firmware device and hardware are showing . Once you go the unofficial flashing firmware route Kies may not find these codes until you find the correct codes .
Stock = Samsung firmware Original = network branded that came with the phone .
jje
Click to expand...
Click to collapse
You are right I want original firmware. Main problem is I have no idea what this would have been. I didn't make a copy as my first upgrade involved doing a kies reg hack before there were any custom roms and I stupidly didn't take note of what I was currently on. What I do know is that my phone has never had any operator logos or software on it. (unlike my gs2)
I have tried doing the reg hack on kies 2.0 but apparently thats not properly supported yet (can I use an older kies 1.5 or something? or will it ask to be upgraded?)
I have tried using spooffw but step 3 (where you set phone and csc) doesnt work, when you press ok is reverts back to whatever it had on before no matter the value you enter.
Does anyone know of an o2 stock firmware that has been uploaded somewhere? ideally with pit, csc modem and pda. then I can hopefully use odin and then confirm that all is ok in kies?
Or if I am going to go the spoof route (probably with kies 1.5 as 2 is not playing ball) does anyone know what values I should use for each?
Thanks
well on www.samfirmware.com there is a list right at the bottom for provider FW, maybe one of them is o2 firmware, check it and see if any of them stand out as the one you had firstly.
why do you need o2 firmware specifically ??
you can sell your phone with JPY 2.2.1 stock and no one would be the wiser .
azzledazzle said:
well on www.samfirmware.com there is a list right at the bottom for provider FW, maybe one of them is o2 firmware, check it and see if any of them stand out as the one you had firstly.
why do you need o2 firmware specifically ??
you can sell your phone with JPY 2.2.1 stock and no one would be the wiser .
Click to expand...
Click to collapse
jpy? so is that a firmware you could actually get on a device brought in uk? which specific download should I choose? Once downloaded and flashed if I connect to kies will it be able to do future updates?
EDIT woohoo I did as you said and used UK JPY found here
http://www.multiupload.com/PZNPALHVDW
and its now being picked up in kies saying latest firmware installed. Excellent now I can sell it without worrying.
bit sad it was definately the best phone ive owned and there still doesnt seem to be much out there that can push it to its limits (let alone the s2) still the extra screen size and better pixel layout are definately worth the upgrade.
Thanks everyone for your help.
If thats not it i uploaded O2 JPY within the last month linked in two posts .Dont know where though .Its probably mine on Sammy anyway .
Flashed direct as PDA via Odin . If problems after with modem . Unzip file extract modem flash file again as PDA and also the modem file is what i did .
jje
What happend if i want to flash KB3 with modem tar from LUBKB1 for example that its my original firmware (Argentina).??
A bricked phone...& even dont think to try it..
I thought the same because xxkb3 seems to flash different from single tar firm like lubkb3..i cannot solve my 850 band problem yet
Any way to make a lubkb3 firm with 3 files and pit?
Sent from my GT-I9003 using Tapatalk
True.... i just download the rom and notice that... dam.... can some hack the 3g driver or baseband like in Motorola, before i have this phone i had a Motorola Milestone, and i flash any room of milestone and then aply a patch called 3ghack, and i got 3g in every rom, cant we do the same in samsung?
Hello
I used heimdall to flash the samfirmware Ginger bread rom
i wiped data from my phone but in about it says I900UGJK4 is the baseband
but build is GINGERBREAD.UCKF1, also going to download mode I still get the old digger android guy i thought the new was two computers
firmware says 2.3.3
Please help, not sure if something is wrong but it boots and works, just think its odd
Thanks
so what is the problem?
download mode didnt change the image shown
baseband is your MODEM
.....
not really sure what you think is wrong about it
I just wanted to make sure that it flashed correctly so I can try other GB roms, 1st I have to find a modem that works can not get or make calls
Thanks
that would be because of your modem. the samfirmware.com UCKF1 tar file includes a UCKF1 modem that will work for your setup.
Thanks never got the modem working that came with I reflashed just the modem to the correct one from Sammy I could nor hear people I called they could hear me but no sound heard from them tried to call me voicemail same thing. Gave up on official 2.3.3 kept bootloaders just flash another rom and now good. Also never got the H or the speed of hspda
Sent from my captivate using XDA App
Yesterday went ahead and flashed the modem to tmobile stock NA using ODIN. Did some research and from I what I found the thinking was this would fix the issues with dropping the cell connection as the Rom was using the European modem firmware. Flash went fine, however now when I go into providers and select T-mobile I get a message saying it cannot connect to the server. Under the system settings it is still showing up as JPZ.
Please any help would be appreciated
Ric Nagy
Galaxy Tab 7' SGT-849
64GB Memory
Cyanogen 10 Latest nightly build
Connection Issue
I had this question answered in another forum....I was told to copy the modem.bin file to the /radio folder on the GTAB. However as far as ril's from what I see getril's doesn't support GTab and not sure where to find the ril's for TMo N/A stock modem
Help Needed
rjnagy said:
I had this question answered in another forum....I was told to copy the modem.bin file to the /radio folder on the GTAB. However as far as ril's from what I see getril's doesn't support GTab and not sure where to find the ril's for TMo N/A stock modem
Click to expand...
Click to collapse
Still having original problem...flashed us stock modem using ODIN which seemed to break my data...then I tried copying over modem.bin to radio...still can't connect...getting message "Cannot connect to this network right now"
Baseband shows up as T8849UVJJB which I'm guessing is the stock modem.
Samsung Galaxy Tab
CM10 4.1.2
20130210 P1 nightly
Any help would be appreciated.
Is your IMEI OK? Showing as 35xxxx ?
Anyway since February already many T-Mobile user in P1000 said connection failed.
It must be due to something T-Mobile did, or new security measure.
Two persons in this thread, 5-Feb is the start of the problem
http://forum.xda-developers.com/showthread.php?t=2135600
Sent from my GT-P1000 using xda app-developers app
Modem Issue Solved in a roundabout way
After I had flashed the modem originally...I went back and did a backup of my apps with Titanium Pro and then did a reflash of the CM Rom the cool thing was after reflashing the rom it kept the tmob us stock modem, I got my highspeed connection and then restored all my apps with Titanium.