[Q] Power button for HTC TYTN II - Tilt, TyTN II, MDA Vario III General

The power button on my TYTN II is playing up. It gets stuck down sometimes so I need to replace it. Does anyone know where I can get spare parts from in the UK? I tried a repair shop and they said that they can no longer get hold of the power buttons which I don't really believe!

Related

hardware button stuck

Hello guys, i was just using my phone normally and the volume down button got stuck!
Now when I turn on the device it always goes to "serial" bootloader screen, although I can keep volume up button pressed (volume down + volume up only) and the device will enter in Windows Mobile.
Anyway in Windows I cant access volume control . Try pressing the two volume buttons in the same time.
Anyone knows some way I can manage sound volume without the volume buttons? Anyone fenced a hardware button stuck problem like these? Should I try open and fix my phone?
I have the same problem but with the Power button. I still don't know if to open it or send it to HTC for repair. I live in Argentina and HTC doesnt have a support center, but in Brasil there is one. I would love to live in Brasil and be able to send it for repair. I am almost about to go by car from Buenos Aires to Sao Paulo.
yeah, Monday I will call brazilian hot line and discover what they can do for me. My biggest problem is that my model is from Europe and not the brazilian one.
maybe I can contact some guys in Htc Brazil to help you.
I had this problem breifly with mine. I pressed the button again afew times and it sorted itself :s
i also have that problem, it got stuck. do anyone know how to disable the volume control buttons, i mean removing the shortcut?

Power button malfunction?

I know this is a known issue, but I think i got a rare case here.
I had some random issues in the start, before 2.2 came out, when the first
I started getting this issue after going over to 84B(?) and had used the N1 torch (high brightness) till the light started flickering, after that the button hasn't worked at all, EXCEPT inside the flashboot(?) menu, there the button works after about a minute.
Im still lucky enough to the point that the phone starts itself when i remove and insert the battery again (might this mean the power button is already "pushed" in?), also, i installed the trackball wake function just before the power button started malfunctioning so i havn't lost control of my phone just yet.
Does anyone have any tips to get the power button working again?
Get a swap from HTC.
I've done it with a broken power button and unlocked phone.
There's a little problem with that, since I the warranty goes away when you unlock, i took the liberty to open up the phone (removing the warranty sticker over one of the screws). I was happy I did it back then, because my power button started to work abit after that.
Also, I bought my N1 through a reseller on ebay, right after the phone was released, i also live in europe, so i think there will most likely be repair costs to get it fixed.
Has anyone done this before? Does anyone know how much these repairs cost?

[Q] Help! power button problem

Hello Guys,
My nexus one's power button doesn't work after using a body protector,when i wanted to push the power button i had to push it hard and after 1 month i took it off from my nexus,and i could use power button but i had noticed that it needs to be pushed hard,and now it is not working at all,unfortunately in my country there is no google service for nexus,but hTC does some services here,i think it's the flat thing of my power button because when i push the buttton it reacts(the Spring of button reacts)but i don't get any digital reactions.
Please help me and show me a Way!
If you get tactile feedback then the plastic button itself is intact. Therefore it sounds like a problem with either the logic board or the flex/power button connection. Unfortunately it's much cheaper and easier to replace the plastic power button than the logic board (Assuming HTC chooses to replace the whole logic board and not just that one connection). You can replace it yourself but it will Void your warranty and can be a little tricky.
Ive got the same problem, i also can't get mine fixed by HTC in my country. And ive taken it to a few places in the city who can't fix it.
Right now im relying on trackball wake to turn the screen on, and screen off and lock app to turn it off. and hope they work until i upgrade.
And if you do run out of battery and need to turn the phone back on, plug it into usb power, and pull the battery a couple of times until the yellow LED turns off, and the phone will boot.
Thanks guys i found someone who had a TOTTALY broken nexus one and he was selling it's spare parts,an i bought the whole logic board from him and it cost me 95$ but think it worth it ! Because in my country you can't buy your cellphone with your simcard contract and i bought my nexus one 750$ and if i decided to throw my nexus away i had to forget 750$!,also i found anotherway for fixing an i think it's cool for you guys to know,you can bridge the your power button's broken logic place and your main logic board with a wire and then you can use your power button like before!

Power button kinda stuck in

Anyone had this problem where the power button is stuck in a little, it's still press-able but its stuck in deeper than before.. How can i fix it? Since i bought it on ebay i don't think it comes with warranty.
Anyone has a similar problem? The power button just keep going deeper and deeper now -.-
the power switch itself has probably come unsoldered from the motherboard
Used to see this often on Nokia Phones.
Your best bet would be to sent it off to LG for repair

[Q] i9000 bricked?

Hi guys,
i cant switch on my phone at all. 3 combo button cant work too. my phones dead except for charging.
history of my phone:
replaced screen.
power button ribbon was damaged while replacing screen.
so i bought a new ribbon to solder it on.
i was using the phone without the power button while waiting for the power button ribbon to arrive.
one day my phone just went to a black screen and thats that. i cant even power on my phone now.
just soldered the power button ribbon back. still not working.
any help guys???
Just read this....CLICK ME
Maybe it can help identify whether there is something else wrong with your phone or if your power button is still not working
Also there was a thread i believe in Q&A a while back where someone had broken his/her power button. So try the search again... GL

Categories

Resources